BMW 335d E90 ABS and DSC lights on... No parts required! Fault finding and repair.
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
This BMW came to me due to a few issues on the braking system... ABS light on, DSC light on, etc...
In the end one fault causing some others...
A quick scan revealed a few codes, but the 5DD0 caught my attention...
Can we fix it?
Follow me on this video to find out what was the problem and how to resolve it.
Hope you enjoy the video.
Any questions or comments put them below.
Like always, thank you for watching!
Hi Luis,
Excellent work yet again on both diagnosing and resolving a tricky ABS\DSC issue. Does the work you carry qout cost significantly less than replacing the item? Furthermore most organisations offer a lifetime warranty on electrical refurbed components.
On a personal note thank you for all the effort and enthusiam in posting your weekly channel throughout the year and may I wish and your family continued good health, success and happiness for 2024 🎉
Hi
Depends on what you replace it with...
With a used unit, probably... but again you would be gambling on an unknown part condition...
I don't believe anyone could offer lifetime warranty on an item like this, which clearly has the brushes that will eventually wear out...
What they count on, is that the car either changes owner or is scrapped before any warranty claim is made...
Just my opinion...☺️
Marry Christmas and Happy New Year
👍👍👍👍
An old school honest repair! Nice to see 👍 Wish you a Merry Christmas and a Happy New Year 🎄🎉
Thanks!
Merry Christmas and Happy New Year
🎄🎄🎄🎄
good morning Luis its nice to have the bleeding mrs to help what would do with out her wouldnt your time repairing pump cost more than a replacment from breakers plus other things to think of . merry christmas to you and your family
If was a garage doing it probably...
Me doing it, definitely no...
👍👍👍
Merry Christmas
🎄🎄🎄
My car i had damp fail the stop light switch which then blew the ABS unit. Bought second hand and replaced with same part number, no coding, it worked. But i lost the tpms. To see if pump works run the priming bleed routine. Obd said the pressure valve failed.
Only had one extra unnecessary light offending.. the fuel light why do customers bring their vehicles to be fixed without fuel
Spot on words😅 as a tech i know how it feels when you start working on vehicle and see that pesky low fuel 😅light😊
Specially when it needs road testing...
The amount of times I had to go to the petrol station with a Jerry can...🤦♂️
@@LMAutoRepairswe charge for the time it takes to get to gas station and keep receipt of gas to charge customer. Thats mechanic time…
I will have to start doing the same...
👍👍👍
When you install the bearing, it must be at the correct position/level. Use a C clamp and socket to press it on. It should be 11.9 mm below the end of the spindle.
Un grand merci, j'ai un problème similaire sur une 206 avec un abs MK70 et problème de charbon. Ce n'est pas le même Abs mais j'ai une très bonne information pour sertir le moteur en place de nouveau. Merci encore !!
Very smart repair mate ! Nice holidays to you and family 😊
Thanks!
Nice holidays!
🎄🎄🎄
How did you remove the bearing sir im stuck on that ty so much for your video to save me money
I don't remember now how I did it...
Probably on the vice...
👍👍👍
Hope you and your family had a nice Christmas!!
☺️
Thanks!
Best wishes!
👍👍👍
Awesome video sir and I myself is facing same issue it's under warranty however doesn't cover this 😂price replacement 😂😂😂2kand above I see now why we go diy 😂I'll be grabbing a donner and will use the original after I fixed it I will sell it the donner I'll just need to reprogram it no biggie and the bleeding process but fixing these abs units I see $$$$ on the side thank you 🎉🎉🎉🎉
☺️
👍👍👍
Where do we find you? I have a f11 520d dsc fault
Another good job Luis Bom Natal e Feliz Ano Novo
☺️
Thanks!
🎄🎄🎄
Feliz Natal
Great fix be interesting what codes were in the original abs pump . Have a good day with your family
In the original ABS pump?
The ABS pump in the car was not the original, but was not replaced trying to solve this problem...
Was replaced some time before, and just failed some time later...
I think you got your wires crossed...🤪
👍👍👍
@@LMAutoRepairs oh yes my bad !!😁😁
I'm not saying this applies here; but for me, the first step I always take with DSC/ABS issues on a BMW, and one that probably needs to be done anyways, is to bleed the brakes. The DSC system in these cars need decent fluid to work; old fluid will compress too much and the pump won't build pressure during its BIT. Takes 20 mins and has remedied more than half the DSC faults I've come across.
Unfortunately, changing the pump requires the brakes to be bled.. which usually gets enough new fluid into the system to solve the real issue.
Just my two cents for those watching that don't have a scan tool!
Cheers.
😊
👍👍👍
Amazing sir but i have question sir we have bmw 2005 model the break is very hard and not working we change boster and many things but the break still hard sir what the next sir because i can't drive the car because break not working
Hi
Difficult to tell...
If you have vacuum and no leaks, the only thing left really is the module...
Have you scanned it, any codes?
👍👍👍
This is the best video
☺️
Thanks!
👍👍👍
Hello , what type of extractor did you use for the rolling ?
Did you say the wipers are running because you disconnected the ABS?
Yes... that's correct...
👍👍👍
Briljant Merry Christmas to you and your family
Thanks!
Merry Christmas!
🎄🎄🎄
Excellent video luis Thanks for sharing
☺️
👍👍👍
You are not afraid that when you are repairing the abs module and an accident happens and some technician discovers that the abs module was tampered with - even if the obvious cause of the accident was not the brakes, you have courage...
why should he be worried? if he has done good job, he doesn't need to worry about it...
Anything can fail at any time...
This only prevents the ABS from working, normal brakes are still working just as normal...
👍👍👍
Well done my guy
😊
👍👍👍
Can I ask what do you do for wiring diagrams .
HGS...
For BMW TIS online...
👍👍👍
Merry Christmas 🎉🎉🎉
🎄🎄🎄
Merry Christmas
Thank you for another great video!!!
☺️
👍👍👍
Pin 17 on mine has to power what should i do?
well done another good fix .. 😊👍
☺️
Thanks!
🎄
👍👍👍
Why did a wipers stay on when the ABS is unplugged That seems very unusual
I guess the can network runs through the ABS unit... and if they loose communication as a fail safe they turn on...
Just a guess...
👍👍👍
Can you do coding for BMW, I am interested in cruise control retrofit for my e90
Yes, you should be able to code those functions...
👍👍👍
Is this something that you can deal with?
Yes bro how are you? bro I’ve got an Vauxhall mokka 2013 1.4 turbo petrol ,customer bring it to me because of low engine performance no engine code on dash ,I did diagnose with autel maxis (like yours) no fault on Vauxhall But I’ve see fault when I read only EOBD option ,fault code is P0366 So I tried to delete fault not working I did check all wiring from cam sensor to ecu I read all voltage and resistance it’s fine ,what do you think it’s could be ,fault is electrical fault I also change sensor as well in first step ,so please give me any idea ,I’m stock
Scope the timing...
👍👍👍
Why does the wipers come on when disconnecting the ABS unit?
I guess the can network runs through the ABS unit... and if they loose communication as a fail safe they turn on...
Just a guess...
👍👍👍
Yes big man
My e92 has the same issue, would you be able to help?
I thought I have already helped with the video... it is all in there...
😊
What is that battery charger you have?
www.halfords.com/motoring/battery-maintenance/battery-chargers/ring-rcbt27-pro-battery-charger---12v%2F24v-27a-116438.html
Why do people take cars to be repaired with no fuel. Minimum should be 1/4 tank otherwise no repair.
Not a bad idea...
☺️🤪
i have all these lights but my pump does not fail when tested steering howls and hollers when turned i replace reservoir already and diluted fluid so its clear green. frm has a ton of codes like lights malfuntioning i wonder if it needs programmed
If you have warning lights, you most likely have trouble codes...
Scan the car and see what the issues are, they might point you in the right direction...
👍👍👍
@@LMAutoRepairs I have a scan tool I scan it and it says dtc.
🤷♂️
Which scan tool are you using?
@@LMAutoRepairs foxwell n710 for bmw
OK... you said shows dtc... dtc what?
Should have something after...
There's only two tabs. Not four
Doesn't change the principle...
But thank you for the correction!
👍👍👍
bon natal
Bom Natal
🎄👍👍👍