Pressure Washer Gun Repair Kit STEP BY STEP
ฝัง
- เผยแพร่เมื่อ 16 ก.ย. 2024
- In this Pressure Washer Gun Repair Kit video, I walk through step by step the entire process of installing the parts in the repair kit. There are many tips and tricks that will help you overcome some of the difficult and tedious aspects of this project. We hope you find it helpful and encourage you to leave a comment if you have any questions. Be sure and subscribe to my channel and hit the bell so you'll receive a notification when new content is posted. Feel free to share this video with anyone you think would benefit from it.
Suttner Gun Repair Kit www.dougrucker...
Are you looking to start a pressure washing business? Check out our training and mentoring opportunities at www.pressurecl...
I have an online video school with over 250 training videos that will help you drastically cut your learning curve if you are starting a pressure washing business. www.pressurecl......
Be sure to check out our Pressure Washing Classes and Training Schedule here. I have one coming up in September, 2 day training event for $359.00 www.pressurecl......
For all your pressure washing equipment and supplies please visit www.dougrucker...
Here are some helpful tools I use that I purchase through Amazon. These are my affiliate links, that I earn a small commission on for posting them. Trust me it’s not much….
Ladder Stabilizer
amzn.to/3fYX6rf
Stucco Tape
amzn.to/2RTpzVr
Goolo Charger
amzn.to/2yR6yfD
Ball Valve For Soft Washing
amzn.to/2YaldNz
Outdoor Edge Razor Knife
amzn.to/3bLgghq
Two part epoxy Paste
amzn.to/3gjuV6R
Manfrotto Tri Pod Kit
amzn.to/2WYpG4V
Crow Foot Wrench
amzn.to/2Nf3HRH
50 Foot Flexzilla 3/8 Air Hose
amzn.to/38s4gRH
Rigid Soaker Nozzle
amzn.to/2OLCzu0
Thank's Doug ! Without your video I'll couldn't fix my Suttner Gun.
Your very welcome. Glad it helps.
your videos are excellent. Thanks for that.
Hello, very good video, excuse me, does this kit fit the general pump gun? DG5010 and where how can I order it and what is the name of the kit? Thanks 🙏
No, this is for the Suttner gun ST2305.
I have an issue were water is leaking out of the nozzle. I replaced all of the orings but water will still drip out causing my pressure washer to turn on or off or pressuring nonstop. My hose outlet and garden hose qd’s aren’t leaning either. ¯\_(ツ)_/¯
Great Thank you. Good Job
Thanks for the info
Your welcome
My nozzle has had a slow leak ever sinse i turned 50.
Is the pipe inside the gun where the 3/8 quick coupler connected removable?
Yes everything inside is removable. In fact I've used the little pipe before as short little extension wand.
@@dougrucker6783 so the thread is 1/4 npt Or bspt?
is there a repair kit for the mosimatic 29.132?
I would think so but I’m not sure as I don’t carry that gun.
Hey Doug the guns you throw away i will buy (seriously) my gun is leaking and im just starting out and not able to buy new things I can afford to repair than replace. Thanks for the video
Mr Rucker, where did you buy the stainless steel reducer coupling 1/4" FNPT by 3/8" FNPT at entry point of gun? I desperately need one. I've purchased several other items from your store, but I cannot find it there. Please help. Thank you. By the way, great, informative videos.
you should be able to find them at home depot or Lowes, ace, etc. Plumbing supply.
Mr Rucker, I've searched at all those stores you mentioned, to include the internet, and nowhere does anything resemble what's on your gun, i.e., the long neck that goes into the 1/4" pipe, and the 3/8" female is not thick like the one on your gun which probably affects the PSI associated with their reducer coupling thereby rendering it ineffective for a high capacity pressure washer. I really think if you made that item part of your store inventory followed by a video, you would have a high selling item. By the way, your gun swivel video prompted me to buy it. I'm sure I'm not the only person looking for that particular reducer coupling. Any further information on your reducer coupling would be greatly appreciated. Thank you for your previous response.
@@hectormontemayor5385 I’ll get it up on my site this weekend
Wait. There’s no reducer on the bottom of my gun. It’s just a 3/8 MPT coupler
@@hectormontemayor5385 I think you're looking for a 1/4" fnpt to 3/8" mnpt hex bushing. It is in his store with that name, but I also found it at my plumbing store Somerville in 316 stainless steel. I could only find brass ones at Lowe's and those broke all the time. The power washing companies don't seem to sell them at all since they're part of the wand. I have yet to find thicker ones, but the steel one I last used is still holding up.
Mr Doug, I need a 325 or 350 poly water tank. Where is the best place to buy one?? Tractor supply is to expensive
Pro tank. Tank Depot. Not sure what’s in your area
@@PressureCleaningSch I live in the middle of Tennessee, in a town called Cookeville Tennessee, right here at Tennessee tech. Just a T supply that's it, thanks for getting back to me
The one I'm fixing is just a ball and spring, but it's leaking passed the valve when the trigger is disengaged and I can't tell why. Not sure if there's a seal missing, if the ball is worn down, or if the ball cradle isn't shaped right anymore. It only leaks out of the tips.
Is there an o ring ?
@@PressureCleaningSch There's a little ring past the ball's cradle that the rod goes through but it's not leaking out of there. I put everything back together and it's still passing through. Unfortunately, it is now leaking from behind the female connector to the wand also. I can't remove the hose from the wand because it looks like the owner never ever did. It's really seized up.
Having same issue
@@timothytidmore6922 It's been a while, but I thought it'd best to share what I ended up doing. I removed the hose from the gun. The hose's connector was destroyed in the process so I ended up getting a new hose. I cleaned up the threads on the gun as much as possible, wrapped some thread seal tape around it, and connected the new hose. It sopped leaking everywhere. I really don't know how, but disassembling the gun, cleaning the ball valve and spring, and assembling it back together may have done something before connecting a new hose.
Hey man. I have a Stuttner st-2700 SS and I bought a SS rebuld kit and watched your video. I was having an issue with my gun where the gun would constantly flow. I got to the portion where you have to use a screw to pull the tiny metal insert out and mine is so stuck. I've done exactly what you have done. I further went to try a torch ( didn't work) and pb blaster ( didn't work). Have any ideas?
Yes just replace the gun. Sounds like it’s pretty well stuck. Don’t mean to sound rude but the time and effort in fixing one sometimes outweighs replacing it.
Thank you. That what I was thinking.. Do you think the stainless steel internal spray guns last longer than the brass?
@@brandonthompson9505 maybe a little. But not worth the extra money IMO
Hi Doug. In my country there are no specialized surfactants for pressure washing. What you recommend to use and whats the ratio of surfactant per gallon of SH.
Thanks.
You could try a laundry detergent.
@@PressureCleaningSch tide could work
@@PressureCleaningSch Gain or Arm & Hammer w/ oxy actually work fairly well, & since they work with SH its a bonus .. especially in a pinch & they smell good
@@adwhite804 tried then both years back when they became the rage but neither worked well on windows for me. Plus I wasn’t fond of going to dollar stores or grocery stores and buying a bunch of stuff than having to transfer it in the gallon jugs. Just a little too time-consuming for me.
Hey, i just bought a Harbor Freight 4.2 gpm pressure washer because I was in a jam. The nozzle always weeps. HF tech dept said that's normal and helps to keep the pump cool . That doesn't sound right to me. None of my other guns do this. What do you think? Return it or normal for this particular unit?
That type of gun is most often used in car washes. Not good for what we do. I'd return it for a non weep gun.
@@PressureCleaningSch Thanks for all of the excellent information on your site. I will be ordering all of my pressure washer components from you.
@@petertselikis940 thank you Peter. Much appreciated
❤