Absolute Core Clock in T-Rex Miner is LEGIT (How to lock core clock and lower wattage)
à¸à¸±à¸‡
- เผยà¹à¸žà¸£à¹ˆà¹€à¸¡à¸·à¹ˆà¸ 5 à¸.ย. 2024
- Thanks for clicking on my video! In this one I go over this amazing new feature in T-Rex miner that lets you lock the core clock of your GPUs to a specific frequency. This leads to much lower power consumption, in my case almost a 20% reduction in wattage without reducing hashrate. Using absolute core clock in a crypto mining software like Trex miner is a new and better way of overclocking your graphics cards that leads to much lower electricity being used which means cheaper power bills!
Please note: this description contains affiliate links, which means if you make a purchase through those links, the channel gets a small commission at no extra cost to you. Using these links helps support the channel, thank you!
------
ð— ð—¬ ð—¢ð—™ð—™ð—œð—–ð—œð—”ð—Ÿ ð— ð—˜ð—¥ð—–ð—› (ð—§-ð—¦ð—›ð—œð—¥ð—§ð—¦, ð—¦ð—§ð—œð—–ð—žð—˜ð—¥ð—¦ ð—˜ð—§ð—–)
👕 ➞ www.gpuheadz.com
Get something AWESOME & support the channel 😊
------
ð— ð—¬ ð—¥ð—˜ð—–ð—¢ð— ð— ð—˜ð—¡ð——ð—˜ð—— ð—¦ð—§ð—¢ð—¥ð—˜ ð—§ð—¢ ð—šð—˜ð—§ ð— ð—œð—¡ð—˜ð—¥ð—¦ ð—™ð—¢ð—¥ ð—”ð—¡ð—¬ ð—–ð—¢ð—œð—¡
🌟 ➞ bit.ly/seb-Coi...
Use above link & code: SEB for a $120 discount!
ð— ð—¬ ð—§ð—¢ð—£ 🱠ð— ð—œð—¡ð—˜ð—¥ð—¦ ð—§ð—¢ ð—šð—˜ð—§ ð—¥ð—œð—šð—›ð—§ ð—¡ð—¢ð—ª
🤖 ➞ Great value for money miner: bit.ly/seb-E9-Pro
🤖 ➞ Great miner if you have expensive power: bit.ly/seb-Jas...
🤖 ➞ Small, low-electricity miner: bit.ly/seb-iPo...
🤖 ➞ Massive DOGECOIN+LITECOIN miner: bit.ly/seb-L7
🤖 ➞ Small, cheap & popular DOGECOIN miner: bit.ly/seb-Min...
Use above links & code: SEB for a $120 discount!
ð— ð—¬ ð—§ð—¢ð—£ 🱠ð— ð—œð—¡ð—œð—¡ð—š ð—šð—£ð—¨ð—¦ ð—§ð—¢ ð—šð—˜ð—§ ð—¥ð—œð—šð—›ð—§ ð—¡ð—¢ð—ª
✨ ➞ Good at everything: amzn.to/3FIzpSO
✨ ➞ Incredible at some coins: amzn.to/3yXr3mn
✨ ➞ If you want a beast: amzn.to/3FJTpEv
✨ ➞ Cheap & power efficient: amzn.to/3FIXngL
✨ ➞ For very low power rigs: amzn.to/3FEHp79
As an Amazon Associate I earn from qualifying purchases
ð—•ð—œð—§ð—–ð—¢ð—œð—¡ ð—¨ð—¦ð—• ð— ð—œð—¡ð—˜ð—¥ð—¦ ð—™ð—¢ð—¥ ð—¦ð—¢ð—Ÿð—¢ ð— ð—œð—¡ð—œð—¡ð—š
🚀 ➞ bit.ly/seb-BTC...
Use above link & code: SebsFinTech to get a 4% discount!
ð—–ð—¢ð—œð—¡ð—Ÿð—˜ð——ð—šð—˜ð—¥ ð— ð—”ð—žð—˜ð—¦ ð—–ð—¥ð—¬ð—£ð—§ð—¢ ð—§ð—”ð—« ð—¦ð—¨ð—£ð—˜ð—¥ ð—˜ð—”ð—¦ð—¬
📠➞ bit.ly/seb-Coi...
Use above link & code: SEB for 10% discount!
ð—”ð—œð—¥ð—™ð—Ÿð—¢ð—ª ð—£ð—¥ð—¢ð——ð—¨ð—–ð—§ð—¦ (ð—šð—¥ð—¢ð—ª ð—§ð—˜ð—¡ð—§ð—¦, ð—˜ð—«ð—›ð—”ð—¨ð—¦ð—§ ð—™ð—”ð—¡ð—¦ ð—˜ð—§ð—–)
💨 ➞ bit.ly/seb-AC-...
Use above link & code: SEB for 10% discount!
ð—¤ð—¨ð—”ð—Ÿð—œð—§ð—¬ ð— ð—œð—¡ð—œð—¡ð—š ð—¥ð—œð—š ð—£ð—”ð—¥ð—§ð—¦ (ð—¥ð—œð—¦ð—˜ð—¥ð—¦, ð—¦ð—£ð—Ÿð—œð—§ð—§ð—˜ð—¥ð—¦ ð—˜ð—§ð—–)
💎 ➞ bit.ly/seb-GPU...
Use above link & code: SEB for 10% discount!
ð—§ð—¥ð—¬ ð—›ð—¶ð˜ƒð—²ð—¢ð—¦, ð— ð—¬ ð—™ð—”ð—©ð—¢ð—¨ð—¥ð—œð—§ð—˜ ð— ð—œð—¡ð—œð—¡ð—š ð—¢ð—¦, ð—™ð—¢ð—¥ ð—™ð—¥ð—˜ð—˜
ðŸ–¥ï¸ âžž bit.ly/seb-HiveOS
Use above link & code: SEBSFINTECH for a free $10 bonus!
------
ð—ð—¢ð—œð—¡ ð—§ð—›ð—˜ ð—–ð—›ð—”ð—¡ð—¡ð—˜ð—Ÿ ð—™ð—¢ð—¥ ð—•ð—¢ð—¡ð—¨ð—¦ ð—–ð—¢ð—¡ð—§ð—˜ð—¡ð—§
â âžž youtube.com/@S...
------
📦 ð—šð—˜ð—¡ð—˜ð—¥ð—”ð—Ÿ ð—”ð— ð—”ð—ð—¢ð—¡ ð—Ÿð—œð—¡ð—žð—¦
Mining rig tools: amzn.to/3qhqVLc
Store your crypto securely: amzn.to/3qiUoEi
Clean your mining rigs: amzn.to/40nEiZk
📦 ð—šð—£ð—¨ ð— ð—œð—¡ð—œð—¡ð—š ð—¥ð—œð—š ð—£ð—”ð—¥ð—§ð—¦
GPUs & risers: see above
Motherboard: amzn.to/3lxONKS
CPU: amzn.to/40lck0A
RAM: amzn.to/3gxxHGF
Power supply: amzn.to/3ZbPibj
Use 2 PSUs in 1 rig: amzn.to/3TCWvQn
Plug 4 risers into one PCIe slot: amzn.to/3gfrEqZ
Mini touchscreen: amzn.to/3pMGRmI
📦 ð—–ð—£ð—¨ ð— ð—œð—¡ð—œð—¡ð—š ð—¥ð—œð—š ð—£ð—”ð—¥ð—§ð—¦
CPU: amzn.to/3NafFd7
Fast RAM: amzn.to/3SDS2uE
Normal RAM: amzn.to/3gKsBdz
Motherboard: amzn.to/3syqU5W
SSD: amzn.to/3FjCutg
Power supply: amzn.to/3gHdNfV
24-pin splitter: amzn.to/3fegxAZ
As an Amazon Associate I earn from qualifying purchases
------
ð—™ð—¥ð—˜ð—˜ ð— ð—œð—¡ð—œð—¡ð—š ð—™ð—¥ð—”ð— ð—˜ ð—£ð——ð—™ ð—•ð—¨ð—œð—Ÿð—— ð—šð—¨ð—œð——𗘠𗜠ð— ð—”ð——ð—˜
â›ï¸ âžž bit.ly/miningf...
ð—Ÿð—œð—¦ð—§ð—˜ð—¡ ð—§ð—¢ ð— ð—¬ ð— ð—¨ð—¦ð—œð—– ð—¢ð—¡ ð—¦ð—£ð—¢ð—§ð—œð—™ð—¬
🎧 ➞ spoti.fi/3TA4n5g
ð—¡ð—˜ð—˜ð—— ð— ð—œð—¡ð—œð—¡ð—š ð—›ð—˜ð—Ÿð—£? ð—ð—¢ð—œð—¡ ð— ð—œð—¦ð—™ð—œð—§ ð— ð—œð—¡ð—œð—¡ð—š ð——ð—œð—¦ð—–ð—¢ð—¥ð——
💬 ➞ / discord
------
ð—˜ð— ð—”ð—œð—Ÿ ð—™ð—¢ð—¥ ð—•ð—¨ð—¦ð—œð—¡ð—˜ð—¦ð—¦ ð—˜ð—¡ð—¤ð—¨ð—œð—¥ð—œð—˜ð—¦
âœ‰ï¸ âžž sebsfintech@gmail.com
------
None of the content in my videos or elsewhere is direct advice, financial or otherwise. Everything said is for entertainment purposes. You do things at your own risk & are responsible for your own actions. Do your own research.
------
#cryptomining #altcoinmining #gpumining #specmining #speculativemining #cpumining #altcoins #bitcoinmining #bitcoin #cryptocurrency #hashrate
To do absolute core clock in T-Rex you need to run it as admin, but you can still auto start t-rex as admin when your computer starts! Check out how here: th-cam.com/video/_bTTdKi7Lvg/w-d-xo.html
Ok I’m back to pick your brain some more cause I’m trying to fix the issue with my 3070 FE and getting invalid shares it’s not crazy but still losing money. Is it usually just memory that effects invalid shares? or can locking the core effect it as well?
@@Ky88431 I’d say if you’ve locked the core clock and mining Ethereum it’s probably the mem causing the invalid shares. Try lowering the mem overclock by 50 and see if you stop getting invalid shares. Good luck!
@@SebsFinTechChannel yes I have locked it at 1140 and my memory is at 1260.
Hey Seb, love the videos. I'm confused though: most settings for mining say -200 for core clock. Why are you setting them at +1000 or more?
@@jamesy3851 you are confusing core clock offset with absolute core clock. -200 would be an offset of -200 from the stock core frequency, 1000 would be an absolute number for the frequency, meaning 1000mhz
That's interresting, thanks for the tutorial! I have a bunch of 3060 Ti, 3070 and one 3080 that could benefit from this. Most of the 3070s managed to get significant gains (either higher hashrate and/or lower power usage).
RTX 3070 : I used 1070 as a baseline --lock-cclock value for all RTX 3070. After testing various numbers between 1050 and 1090, 1070 appeared to be the best on most cards with 1300 memory clock, so it should be a good starting point. My 3070 originally had a power usage between 120 and 124w. Power usage is now between 110 and 120w and the cards either maintained or increased their hashrate.
RTX 3080 : I only have one of these, but by setting the --lock-cclock value to 1035, it did reduce its power usage by 6w (from 214w to 208w) and increased its hashrate by 0.3 MH/s.
RTX 3060 Ti : Doesn’t work with all the 3060 Ti I have, for some reason. They ended up with either 4-5% lower hashrate or higher power usage. The same thing happened on HiveOS, so I guess there is something with the 3060 Ti that prevent them from being as efficient as a 3070. In the end, I can't get them near 62.3 MH/s with anything lower than 120w.
I’ll monitor on my end to see if there are more invalid shares that way, but it looks promising so far. It's roughly a 4% reduction in power usage with no drawbacks (except that you now have to have admin privileges to open the miner on startup).
Wow amazing and thanks for such a comprehensive comment I’m sure that’ll be really helpful for a lot of people reading it! Nice one mate!!
Have you tried these lock cclocks on ravencoin? I tried the 3070 on 1070 but ended up getting around the same efficiency :/
Love your guides! A shortcut for setting admin is to right click on t-rex.exe - properties - compatibility - tick the "run this program as administrator" box - apply settings, and run your batch files as usual, no need to copy directory, and you don't need to run the batch file as admin, admin only matters for the main t-rex.exe :) If there is a bigger advantage to the way you do it, please let me know, otherwise hope this helps some people!
Thanks for the tip!
Seb: Great info and THANK YOU for not trying to sell-push-promote in excess like so many other TH-cam Channels! I appreciate your efforts. Thanks from Elvis Presley Land- Memphis, TN USA!
Mining is fun and that’s what I want to keep my channel all about!
Thanks! This video finally helped me get the core clock locked with t-rex miner. I didn't realize I had to use the full path for t-rex.exe and learned about ctrl-c to exit as well. Now this saves me a step with having to open MSI afterburner after time I want to start mining.
When I start the copy version of ethermine, it says trex.exe is not recognised as an internal or external command.
Press any key to continue
Help me out, it is not working on my PC, is it location error or something else
Omg I have been mining for 9 months ignorant of this! This is incredible so far... Will have to see the stability. Thanks as always Seb! You're the best.
"Go sub to him!" You must be one of the most relaxed guys on youtube. Every video is on a high quallity level of prodcution but you still are humble as fuck, respect
Many have said this already, but I really enjoy your straight forward video approach, no extra production BS, just knowledge transfer. Thank you so much!
Gigabye Eagle 3080 Ti LHR. I added this in my bat file --lock -cclock 1100 --mclock 1350. Power drop from 300W to below 275W with no reduction in hashrate between 81-88 Mhz, most over 84MHz. GPU temp drop from 67 to 62. VRAM drop to 80C from around 86C. Thank you very much Sebs.
Thank you so much. I run a single fan 2060S (pre-built PC) and the power dropped 35 watts (from 125 to 90). I had a big issue with the temp since it's very hot where live. But thanks to this, the temp dropped by almost 15 degree Celsius.
Awesome!
BEAUTY windows users REJOICE!! haha dont need to give me a shoutout bro awesome video 🌴💯💯💯💯💯💯🔥
â¤ï¸â¤ï¸â¤ï¸â¤ï¸
🔥🔥🔥🔥🔥🔥🔥🥳
@@SebsFinTechChannel TO THE MOON pro!
Well...I subed both. Lol
ABSOLUTELY LOVE IT!
Awesome Video Seb, this worked for me and knocked over 140w from my rig and now I don't have to deal with the AfterBurner. Most of all, no more Power Spikes when it crashes and restarts...Cheers! I even got this working on Nicehash without the daging problems...Much Appreciated!
Awesome glad I could help!
You have a short somewhere. When the GPU draws it's start up power. Blue screens atmdag error, they all mean power. Check your cable for burnt spots on the end. I have to shut down 1 time a week to check all contacts. This is the only way I can achieve 1 week long rips over clocked.
I don't worry about saving power, I make a bunch when I make it. Cheers
Nice video. I am currently building my first 2 rigs with 8 cards. Once I get all the cards dialed in. I will definitely try this.
Cool good luck Bruce!
So i have a rtx 3060 rig with dummy plugs all doing like 48.8MHS before had -502 overclock. I uses --lock-cclock 1470 and i dropped 90W total.... THATS A LOT!! thanks!
this is an insane video bro, gained about 2mh and dropped power usage by almost 60w. Thank you!!!!
Thank you! This helped me figure out what I was doing wrong with my batch file config.
Awesome glad it helped :)
Me too!!!!
When I start the copy version of ethermine, it says trex.exe is not recognised as an internal or external command.
Press any key to continue
Help me out, it is not working on my PC, is it location error or something else
With absolute core clock you dont need anymore the PL.
When you set - -lock-cclock , it auto use the lowest wattage possible.
Try it
I know but I like to specify it anyway as a safety precaution :) doesn’t hurt
@@SebsFinTechChannel so true. i have set my pl to 75 on my 3060 rigs. auto use to lowest watt on gpu. highest gpu was 70%, others were playing at 65-68%
was just wondering about this and found this comment, Great video tons of information.
My jaw dropped when 2060 Super went from 125W to 85W while maintaining hashrate :O Thanks alot!
Awesome!
Can you share your settings and hash rates?
Wow...I am blown away by the reduction. Going to have to test this out on a 6 day 3070 rig
Oooh PLEASE let me know how that goes!! 😀
@@SebsFinTechChannel hey Sebs thanks so much for your video! following yor channel since 2 or 3 weeks ago!!! hey @altered looking foward as well to know how that goes!! I own a 3070 as well and mining 24/7
This is amazing... I actually GAINED Mh by doing this! I run a single 1660S in my gaming rig, and it went from 29.6 Mh at 88W and 71 degrees C .. to 30.6 Mh at 68W and 58 degrees C!! My hashrate doesnt jump around as much as it did before, and the whole thing seems more stable now... LOCK THAT CORE!
Hell yes! I just knocked off 700 watts and only 5 Sol on flux with a 11 gpu rig. You rock Seb! A closer up shot of your screen would be nicer! But the info obviously got across.
gaining 1-8 more MH/s and reducing 12-17 watts for my 3070 lhr rig. thank you so much for sharing.. cheers
Great Video! sub too, congrats on 2k subs. 32.8Mh/s on your giga 1660S is pretty amazing!
Thanks a lot! :)
what is your set i onli have 27.
I know this video is about 7 months old but this is awesome. I just saved 34w on my 3070 for the exact same hash rate
Thank you very much, Seb. You saved my life :D
When I start the copy version of ethermine, it says trex.exe is not recognised as an internal or external command.
Press any key to continue
Help me out, it is not working on my PC, is it location error or something else
I was thinking that this might be added work because I had some good oc settings using afterburner, but this did manage keep my hashrate about the same and still drop my wattage down ~20 W.... pretty happy with that
Glad it helped!
When I start the copy version of ethermine, it says trex.exe is not recognised as an internal or external command.
Press any key to continue
Help me out, it is not working on my PC, is it location error or something else
@@anubhavrawat8661 the .bat file you're running needs to be in the same location (or folder) as the trex.exe file... If not you will get this type of error
reduced temp, fan, and power consumption while increashing hash rate.... magic!
When I start the copy version of ethermine, it says trex.exe is not recognised as an internal or external command.
Press any key to continue
Help me out, it is not working on my PC, is it location error or something else
Seb Heslow in the house!
Probably spelled it wrong
Hehe close enough! 👠It’s Hezlo :)
hi happy to be part of ur channel
I have 3 zotac 3070 and 3 zotac 1660 -> --lock-cclock 970,975,980,1330,1332,1333 --mclock 1090,1090,1090,650,650,650.
I got a power reduction of 18%, I am still triying to achieve the best lock-cclock numbers
do you write juste the same for your six cards ? i have one 3080 and five 1660 super
Once again, amazing Mate! Thank you very much
You are very welcome! :)
Love your channel! Great video as always bro
Hi Seb. Geez setting up a rig is a steep learning curve. All the time keeping in mind your electricity cable video. Can you make a video or explain how to check which is the closest Trex server to you. O I am from South Africa. I did do my first 12 hours mining on nicehash. And want to move to trex. But the dinosaur looks scary
Hey Bruce! I actually am making a video about finding the best pool server! Will be out probably next week :) In the meantime I recommend watching these two videos if you haven’t already, they’re good info for people just starting out: th-cam.com/video/2APESKiE6Vw/w-d-xo.html and th-cam.com/video/IkDws5WRrS0/w-d-xo.html
good stuff mate, nice one :)
Wow. You have received a comment from both Red Panda and ChumpChange within a short time after your video was uploaded, well done my Scandinavian neighbor
Top vid. Unfortunately no power drop on my 3080 Suprim X.
Settings:
GPU #0(000c00): MSI NVIDIA GeForce RTX 3080, intensity 22, fan 100%, mclock 1300MHz, pl 68%, core clock locked 1050MHz
Results:
GPU #0: MSI NVIDIA RTX 3080 - 99.26 MH/s, [T:52C, P:242W, F:100%, E:410kH/W], 10/10 R:0%
Mem Junction Temp -- 82c
Core temp -- 52c
(Replaced thermal pads on both sides + GPU Paste)
Ah that’s unfortunate that you didn’t see a power drop but it also seems like you’ve got your card dialled in really well!
Man seb...amazing content buddy
Thank youuuu my friend :)
AMD already used this in their software suite. I find overclocking and underclocking so much easier in the amd software suite for their cards.
You can easily control voltages as well.
With my 3090 I like to start quick miner let it run for a min or so to let it set the OC. I then stop the quick miner then start up T-Rex and it also sets a locked clock at 1200. I am going to try this and see if I cant get the locked clock at 990 instead of 1200 for 124m/h. Thanks for sharing @Sebs FinTech Channel
Awesome let me know if it works!
@@SebsFinTechChannel I could not get a lower CC to get close to the same mh as quickminers OC.
BUT...1300 cc 1900 mc does match quickminers OC for wattage and gives a 3 mh boost at over 127 mh!
@@midnghtmrauder4229 okay cool 😎
Thank you for all your tutorial !
amazing video bro, thank you very much !!!
Man thank you so much, god bless you and the easy way you explain things. I have 4x 1660s and a 3070 and I dropped about 45w, also gaining 1mh/s 🤣 keep up the good work!!
Amazing glad to hear this video helped! 😊 I actually tweaked it some more after this video and gained a couple of mega hash too! Plus my temperatures went down too haha!
hey bro that is awesome! what settings did you use for the 3070? thanks so much in advanced!
@@carlosbarrientos5906 Hi man! if you want to use Afterburner: PL 52%; Core +0; Mem +1300; Fan 62% - If you set them directly through T-Rex: fan 62; pl 52; lock-cclock 1150; mclock 1300. Using T-Rex absolut cclock I dropped +/- 15 watts
@@LucasGG911 you guys are legends! I set mine --fan 70 --pl 52 --lock-cclock 1150 --mclock 1450 = 63.51 MH/s, T:52, P:117w so far all good 0 invalid shares. I will update after 24H
ps it dropped 15w and 8c :) from what I had before with afterburner.
@@LucasGG911 please help me for 3070 Ti oc in t rex
Great video but what is the correct cclock for *2080 Ti*
I too would like to know the answer to your question
omg great advice man
im running a mix 4x 3070 asus tuff 2x3080 running @ 1108w
did the old --lock-cclock 1045
took a stab at it and insta drop to ............... 890w!!!
my jaw dropped oh also little bonus
i only added --lock-cclock to the .bat
what did i see alike 3 hsh increase over all
62.2-62.16 mhs 4x 3070
95.2 and 98.10 3080! these 2rose automatically after .bat edit
you all must use this on your nvidia rigs go trex!
shot sebs
glad i subbed to you when red panda raided you. i've been looking for a how to video of this for a a whole day
Hey glad to have you here on the channel and glad this helped! :)
@@SebsFinTechChannel hey man quick question. so one of my rigs(actualy my pc to be precise. i decided to throw in there a few cards too since i always have on :))) now the question is: can you tell me haw to skip one card to not do any absolute core clock? i tried with 0 but it will not do anything the card is still locked at 130(that i have it set for the first card in my pc(i have a total of 3)
@@lauretiu hmm putting 0 should work. For example if it’s the middle card in the list in Trex you put --lock-cclock 1350,0,1050 obviously the other numbers I just made up you have to use your own numbers there but that’s how you skip one with a zero
@@SebsFinTechChannel yeah for some unfortunate reason it would not. It copy's the setting from my first card in the system. Not the last but first. So my 2070s is locked at 1035 at 102w and now my 3080 is locked at the same even if i did try setting 0 prior to decide to ask(maybe you know something that i don't 😅) and my 3rd card is the 3070 and is locked at 1050 at 125w
@@lauretiu do you set a core clock offset for the card you are trying to skip? either in trex or in msi afterburner? I'm guessing if it doesn't get a different clock from somewhere else maybe it just grabs the closest number? I have no idea honestly
Great video Sebs! I think you put a mix of core clock and memory clock in the --mclock settings, isn't it??
No in --mclock you put the memory clock offset, same number as you would put in MSI Afterburner under “memory clockâ€
I got confused by that too. Some memory clocks you've got set to +1000, +1200 etc, and others you've got set too -502. That's what I usually set my Core Clock to in Afterburner for my 3060Ti's and 3070's. Obviously it's working for you but I don't understand lol.
@@madwedge1 on some 1660 Supers you need to set -502 on the memory clock to get max hashrate. It’s strange but that’s just how it is lol
@@SebsFinTechChannel How strange lol. Thanks for explaining. Have subbed 👌
Thanks for the tips bro! I save 20W++ from this :)
Awesome!
When I start the copy version of ethermine, it says trex.exe is not recognised as an internal or external command.
Press any key to continue
Help me out, it is not working on my PC, is it location error or something else
Thanks for your awesome contents. Will this work for mining Ergo?
I've been laptop mining and my temperature went down from 80+c to 65c after update
Fantastic!
What were your settings if I may ask?
Nicehash crashed on me and when I opened it next asked if Id like to try other settings so I clicked yes and it started running much cooler
Thank you for the tips, they are very helpful.
One request though, could you use some recording software for the screen, as it's difficult sometimes to read.
Hi Amir thanks for your comment. Using a screen recorder messes with the video cards and reduces hashrate and makes them behave weird.
I own U a beer Seb :) You are my mentor right now, keep it going m8.
Nice video, you really help me :D, thanks you UwU
Gave this a shot and it actually increased my power consumption by 10 watts for the same hash rate on my 3090fe compared to my optimized afterburner settings. I'm currently getting 128.6MH/s with core voltage locked at 731mv, core clock at 1470mhz, memory +11151mhz(+1650) at 294 watts.
128.6Mh/s at 294w is very good
locked volts on curve ?
and memory 1151mhz you maybe mean 11151mhz ?
@@LordLab yeah I meant 11151mhz, I'm very happy with the card I got.
@@ThatBushWookie Core 1470Mhz / 11151Mhz / 294W , I guess 16x PCIE watt usage not calculated , under 300w is just impossible with so high core clock , normally 1150mhz is a max core clock needed , I guess you see only 8pin power usage only .
you can check GPU-Z , I guess some of your watt sensors is not working .
@@LordLab Nothing wrong with any sensors, the reading is the same in both hwinfo64 and Trex miner.
@@ThatBushWookie when it broken it show exactly same watts on all programs except GPU-Z in there it will show watt usage per connector
can we use core clock with gminer?
Thanks a Lot Seb â¤ï¸
Nice video! Is this savings in power, above and beyond what one can achieve with Afterburner or is it merely a different approach to achieving the same results?
Its not working for me... it gives the same error again and again "'C:\Users\Crypto' is not recognized as an internal or external command,
operable program or batch file."
Yes mine too, did u get the resolve from this error
Liked, absolutely liked.
I'm curious. I'm using Awesome Miner as I love the auto-switching capabilities and MSI Afterburner but of course that's a universal setting so my 1660S's run at +105 and +1100. If I use the Trex switches as you've shown them, is it going to fight with MSI Afterburner or will it just temporarily override the settings it supplies and use the absolute clocks instead? The idea being that while mining Ethereum, it's best to reduce your GPU clock and increase your MEM clocks but other algo's such as Alium are basically the other way around. I guess what I'm trying to figure out is if I set TREX to handle the clocks while afterburner is running, is it going to more or less leave those settings in place if I switch to another algo and miner???
Thanks, that means more profit to be made!
Exactly! And more profit means more cheese!
Always good videos. Never miss a video
Great video ðŸ‘ðŸ‘
Thank you ðŸ‘
Great video thx!
Quick question: Why do you set power limit (--pl) along with locking the core clock? I thought locking the core clock (--lock-cclock) takes care of that already.
You don’t need to I just like to do it as a backup in case something goes wrong
Thank you boss, I would be very grateful if you can provide a fine-tuning method for overclocking parameters of HIVEOS
Hello friend a lot of useful information thanks a lot. Does this work with other algorithms?
It does but it’s only useful on algorithms that don’t rely on core for mining
My 2060 now 79w 31 MHS previously it was 125w 31 MHS,thanks
Awesome, glad it helped!
Thanks bro for the videos very useful. Any idea what lock values for I should use for GTX 1080?
Unfortunately this does not work for 1080s
@@SebsFinTechChannel how to do I skip 1080 setting, if I have it in same rig as my 30series?
@@supersaiyan196 just put a 0 ðŸ‘
@@SebsFinTechChannel so can I set oc for 1080 in MSI AF after setting 0 in trex?
Instead of using absolute path in the batch file, you can give administrator rights directly to t-rex.exe
Oh yeah? How do I do that?
@@SebsFinTechChannel right click on t-rex.exe > Properties > Compatibility > Run this program as administrator (Apply, Close, smile)
Hey Sebs, thanks for the awesome video. I got a 2060 (notebook), do you know where I can get the best settings for my gpu?
I always like BGM🎶
Thanks mate! I actually make the music myself! Link is in video description :)
This also works on Phoenixminer, but the only way I know that it does is using HiveOS. From what I've heard so far this only works for 16xx, 20xx, and 30xx Nvidia cards. Sorry Team Red.
Yeah I think this is still the only way of doing this in windows
Did everything in the video but my 2x1660 are still doing mem clock 850 , 75W(micron memory), memory clock -502, 81W(hynixx memory) 62MH/S can you please help or do you have any advice
you just saved me about 20 watts on a 3090!
What values are you overclocking to?
@@AlexPjz I have not replaced the stock thermal pads on the card yet so i was only running it at 72% power limit. my average core clock over the last 7 days was 840 so I locked it to that and went from 255 watts to 236. this is only mining at 85 mh/s. setting the power limit to 77 is where I hit 100mh/s
Awesome man!
@@Rhd16vMk3GTI I have mine 90% fan speed, 725mv, 930mhz and with afterburner -502mhz in vram, 101 mhs, 255w and 46ºGPU 92º Memory with extra cooling in the backplate. (stock thermal pads, going to upgrade soon with arctic ones) With memory @stock speed i have 2-4º more in the memory, 259W and 103mhs
@@fcmancos884 I just tried your settings and they worked perfectly on my card, sitting at 99gh/s @ 255 watts with only 90c on the t junction. Thanks a ton for the info.
Hi Seb, My 1660Ti 's are not affected by this at all, I also dont see them on the list you display at 5:46 on your video, are they excluded from this lock core clock?
Hi Bruce! The absolute core clock for 1660Ti’s is really low. I had great success setting mine to 850. Try that and let me know how it goes! :)
@@SebsFinTechChannel I did try that now, it is as if they do not get affected at all, I might try the memory tweak which should not work but you never know. LOL. thanks for the response
@@BizWithBruce remember that if you set absolute core clock you need to not set your core clock in either trex or MSI Afterburner. If you havent already I recommend checking out my latest video about how to overclock in Trex. :) Good luck!
🤯🤯🤯🤯🤯🤯
🔥🔥🔥🔥🔥🔥💯🌴ðŸ˜
If I plug in the numbers from MSI Afterburner does it do the magic on it's own or do I again have to fiddle around with pl and stuff to find the sweet spot? The power usage displayed in T-Rex stays the same and I can't measure directly at the output
Hello man I just subbed and ðŸ‘ðŸ¼from RedPanda, thanx for this great vid 🥰. 1 Q plz, i have 2 cards 3060 and 1660s, how do I find their oc settings and put them both in the file, any vid for this?
Hey thanks for subscribing, happy to have you here! At 5:45 in my video you can see a list of values for different GPUs. For 1660S I’ve gotten the best result with 1050. I don’t have a 3060 but lots of people have had good results with 1500 on the lock cclock. For memory clock you’re gonna have to experiment to see what gives you the best hashrate. I have one video on overclocking a 1660s, although it’s in MSI afterburner but same process for doing it in Trex: th-cam.com/video/GCiPpnxFrOI/w-d-xo.html
@@SebsFinTechChannel running a EVGA 3060 and looks like I running more efficiently using afterburner after mirroring all the settings and setting cclock to 1500 . Weird right. But thats a 3060 for you.
thank you, very good
Hey Seb, forgive me if this was already asked, but did the software reflect the change in wattage on each card as well? I know software outputs aren’t 100% accurate, but I was curious if there was a way to check it without a wattage reader. (I just ordered one but wanted to test the lower watts).
This comment is old but for others with the same question, in the video the efficiency of the cards showed from kH/W 380-90s to 400+ at the end. I think watts reduced around 10-15W per card on the mining software too.
Thank you ðŸ™
Hello Seb! Do you use both --cclock and --lock_cclock at the same time? Or, one or the other?
One or the other
Great, 3070 TI getting 180W/62MHs Trex 50C
Where did you get that numbers from(5:45)?
My 3060Ti with clock locked to 1300-1350 is going down with hashrate to about 57, but with clock locked to 1400 it's back to 61+
So I guess those are just suggested values, or they shouldn't be exceeded?
Of course Ws are going down in every case :)
Have been watching your videos and learning about mining since couple of months. Have been going well and using hiveos with trex dual mining(eth+alt) for my rtx 3080s and rtx 3060ti. Any suggestions on how I can use lock core clock feature and lower by watts? Thanks
Two videos in one day??
Just learned about this and just HAD to get a video out to spread the word LOL
Hey Seb, great video. I'm running 2 x 3070's, 3060ti and a 1070 in a windows rig. Is there a way I can skip entering a core clock the 1070 or should I just set it to 0?
Just set to 0. 🙂
Hehe yeah I can see you answered your own question! :)
Where you able to memory tweak in the same script you locked for the 1070
Hi dear, what is the setting for the core clock for ravencoin? I want to try this method for ravencoin mining. 🌹
Seb can you share your core lock settings for NON LHR 3080 please?
5:47/9:02
I love trex, and 1660 super
this video saved me
I have good experiences with setting the core voltage in gminer. Don't know if that also works in t-rex. My 3080 runs at 450kH/W and 100MH/s with voltage set at 750mV and +1200 on memory.
What is the absolute core clock for 3070ti?
hey mate did you find out what this is? I've been using 1550
Do you have a list of range for older cards ? 1080/1070/1060?
Unfortunately you cannot lock core clock on a those cards, but you can do memory tweak to increase the hashrate: th-cam.com/video/HIKrYHhbnyM/w-d-xo.html I also have videos on how to overclock a those cards, for example here is my video on how to overclock a 1080: th-cam.com/video/nQJDNojatSw/w-d-xo.html Good luck!
hi Seb, I see you gave mclock 1000 to asus 1660s but -502 to evga 1660s, why are they so different? I see you gave -502 for another asus ...
Hynix memory OC to -502.
Wow that's so good. Can i do on my rtx 3060 LHR on linux OS?
Yes
That's perfect it's the card i own 🥰
HiveOS supports the same feature. However I found it's not that stable as with offset setting (I use gminer+3060ti/3070), has more invalid shares in fix cclock mode. But will try t-rex to lock cclock in stead of hiveOS ... Thanks
Trex just autocloses for me when i run the batch file as admin, weird :(
Is it getting flagged by your antivirus possibly?
@@SebsFinTechChannel I tried that, not AV. Just closes cmd when tried to run as admin. Bug?
I had to put the file path in quotation marks to make it work
When I try to run it as administrator nothing happens, the command file just closes, and if I open it without administrator it says it does not have the sufficient permission or something in that lane, please help me. My GPU is a RTX 3060
Is it maybe being blocked by your antivirus?
@@SebsFinTechChannel I thought about that as well, but I don’t know how to fix it, I am mining on my personal computer so I am a little afraid to turn off all the antivirus. But if you have a solution or can guide me to fix the problem that would be greatly appreciated!
@@noaage4592 hmm sorry I don’t know exactly what you can do there, but maybe just open your antivirus software and see if it has blocked it
Give T-Rex.exe administration rights. I also had the same forced closing issue as you and this worked for me.
Right click miner-properties-compatibility-change settings all users-check run this program as administrator.
Try this. If you have a blank space in any of your folders (the path folders for t-rex.exe that you are writing in the edit) for example a folder named My Computer you have to use " " to define the path.
Example: "E:\CUSTOMERS\MY COMPUTER\PERSONAL STUFF
vn\t-rex.exe" -a ethash -o stratum+tcp://asia1.ethermine.org:4444 -u 0x13e8de3am5i86acf74ad080f1e77390478784fa4 -p x -w
See there is a blank space in MY COMPUTER and PERSONAL STUFF folders so I put " in the beginning and the end of the path.
I hope it helps. Happy mining.
Edit config error (API readonly mode is activated)
getting this error while trying to adjust any values in the file.. Solutions please!!