Hey, brother. You two always amaze me with your knowledge, skills, and guts to try new stuff. You two always amaze me. You guys rock! God Bless you. Chip
Congratulations on the new (to you) attachment 😊 I know backhoe attachments don't get much attention nowadays but they are very useful. So many uses. Good video 👍
Having a mass to swing to one side or the other is incredibly helpful in side hills or compensating for an uneven load on the FEL. It's a unending thing amazing people at the fact a b7100 can pack a 700lb log. With decent counter balance. But also understand as you amp up what your lifting, your seriously stressing things. We have cracked the loader 5 times. Largely because of the stress of long lumber/logs twisting, a major stress on the loader. . if you have a economy 540 rpm option, you will probably find it more then enough. I run are little tinkerbell 16hp in the 1080 rpm at mabe 1,500rpm. Plenty of power to run the hydraulics. . Granted being ran from the main tractor pump, could force you to run at full pto rpm. One negative of not having a dedicated hydraulic system pump on pto.
Good Stuff , The Kids have a little bit smaller Kioti tractor than yours and if a backhoe comes into play , I will suggest the sub frame configuration .
I had a JohnDeere like that it took about 5/10 mins. to take off and on. :-) As a plumber it was one of my best investments. The trouble with some of those. They hang too far out from the back of the tractor for balance. The JohnDeere was all tucked in close.
Just like a blister, I show up after the work's all done... but if you have a cutting torch, and you know how to use it, you can just blow those welds off with the torch and not even touch the base metal that you want to save. Lots easier than grinding those welds out. Takes some practice, but it's not difficult.
My main thing I always tell customers before you buy anything "plz" do your research. Study the product a bit first. It will save you so much time in the long run.
That was a job fitting that bad boy on the tractor frame especially when it's so dang cold out, ha ha. Actually despite everything you seemed to have conquered it. Always something isn't there?
Iv seen a thumb attachment for those. Tell you what that sub frame set up looks like a pain in the butt compared to other models that you just back up to and attach to the 3point hitch. I see that collecting rust after the novelty of it wears off.
good video and job hope they fixed all the weak points. i rented a kubota back hoe it was way to weak and took forever. i could have did it all with a old case in a hour and not all day. wish you luck take care, be safe and well.
GREAT SHOW GANG, LIKE HEATH, I'M A SWEATER LOOKS LIKE A NATURAL SPRING COMING OUT OF MY HEAD, SOAK SWEAT TOWEL IN A MATTER OF MINUTES. WANTED TO ASK ABOUT 3PT PALLET FORK ATTACHMENT, I HAVE BEEN LOOKING FOR ONE LIKE YOUR THAT HAS ADJUSTABLE FORKS TO FIT 3PT HITCH, HAVE NOT HAD ANY LUCK FINDING ONE. WAS WONDERING IF YOU MADE YOURS OR BOUGHT IT. IF YOU BOUGHT THEM, COULD YOU GIVE ME A LEAD TO THE COMPANY? AGAIN, LOVE WHAT YOU ALL BRING US!
You’re right I should just sit home and do nothing. Trying new things is a terrible idea. I guess I shouldn’t even have a channel since I don’t really know much about filming, editing, or computers so by your logic I never should have tried?? Thanks for watching.
back hoe attachments are just a waste o money.. I would rather buy a cheap Chinese excavator then buy that crap attachment. the cheap new excavator in the end would have been cheaper and way way way better.. Good luck with that thing
Hey, brother. You two always amaze me with your knowledge, skills, and guts to try new stuff. You two always amaze me. You guys rock! God Bless you. Chip
Thanks Chip, I can usually figure something out.
Looks like something that will help not only at the house bit at your land!! Stay Hydrated and Have a Safe Day
For sure! Thanks David.
Great video Heath and Rachel
Thank you!
Heath,looks like 👍 you have made a great purchase so far and I know that you will be using it on a lot of projects in the future 😮😊❤
Thanks Todd, definitely have some jobs lined up for it!
I bet you get a ton of use out of that! Awesome buy Heath👍👍
Thanks Jeremiah, I think so too.
Heath, I respect your never give up attitude and ability. 👍🏻
Thanks Mark! Appreciate it.
Ingenuity in getting the right side straightened, nice job.
Thanks Obie.
Awesome buy and nice shirt! It’s never as easy as plug in play when buying used. Great job fitting it to your tractor.
Thanks Matt. Keep up the good work yourself!
Just dropping in to say hello. Looking forward to seeing everyone at the Paul Buyan show. That's awesome news about the HOPE event!
It's going to be a blast! See you soon.
hi there i need to get mine going , good show , good find . best to both
Thanks John, I think it’ll come in handy for sure.
Another great video guys! Congratulations on the backhoe! 👍🏻
Thanks James!
Good luck Heath grinding
Thanks Kevin!
Congratulations on the new (to you) attachment 😊 I know backhoe attachments don't get much attention nowadays but they are very useful. So many uses. Good video 👍
Thanks Lyle, I think I’ll like it!
Nice find Heath👏🏻 Happy Labor day 👍🇺🇸
Thanks guys! Hopefully I get better at operating this than I was the mini x. Happy Labor Day!
Having a mass to swing to one side or the other is incredibly helpful in side hills or compensating for an uneven load on the FEL.
It's a unending thing amazing people at the fact a b7100 can pack a 700lb log. With decent counter balance.
But also understand as you amp up what your lifting, your seriously stressing things. We have cracked the loader 5 times. Largely because of the stress of long lumber/logs twisting, a major stress on the loader.
.
if you have a economy 540 rpm option, you will probably find it more then enough.
I run are little tinkerbell 16hp in the 1080 rpm at mabe 1,500rpm.
Plenty of power to run the hydraulics.
.
Granted being ran from the main tractor pump, could force you to run at full pto rpm.
One negative of not having a dedicated hydraulic system pump on pto.
Very good points.
Congratulations Heath !
Thanks Eddie, should be fun!
@@hardworkingmanoutdoors we bought a AGT Chinese mini excavator from a local auction for $3500 love it especially the grapple
I've been sleeping on a Puffy mattress for about 5 years now. I really like it, so I think you will too. Sleep tight!
Thanks Steven, so far it’s been a huge upgrade!
Awesome purchase . 👍🏻
Thanks Del, I think it’ll come in handy for sure.
I use the down riggers, and experience. It’s easy once you get used to it 👍🇺🇸🇺🇸
Thanks David, I figured I’d get better at it!
Good Stuff , The Kids have a little bit smaller Kioti tractor than yours and if a backhoe comes into play , I will suggest the sub frame configuration .
I think that’s the way to go from what I’ve learned.
That's going to come in handy.
I agree! Thanks.
Love watching your videos keep up the awesome work please
Will do, thank you!
I had a JohnDeere like that it took about 5/10 mins. to take off and on. :-) As a plumber it was one of my best investments. The trouble with some of those. They hang too far out from the back of the tractor for balance. The JohnDeere was all tucked in close.
I’m sure I’ll get better at hooking it up. I think it’ll come in handy for sure.
Big improvement on sound!
Thank you! Appreciate the feedback, we’ve been working on it!
Just like a blister, I show up after the work's all done... but if you have a cutting torch, and you know how to use it, you can just blow those welds off with the torch and not even touch the base metal that you want to save. Lots easier than grinding those welds out. Takes some practice, but it's not difficult.
I do have a cutting torch but need to refill the oxygen and don’t really know how to use it yet.
Lookin good heath. 👍👍
Thanks Pete!
Maybe try a floor jack. Build a plate to put on top of the jack. The jack has wheels that will help you line it up
That may be an option for sure.
Handy tool
For sure! Thanks!
Hey guys. Great purchase. Those mini hoes have some power behind them. Nice install 👌
I’m pretty excited to see what it can do!
When you start using the backhoe go easy with the controls
Will do, thanks Brian!
For price I'd say you did right going that way us more user ability my friend
Thanks, I think it’ll definitely come in handy.
That which one problem can be sorted easy paint one Red which will help you find which way is which
Thanks, the third function has opposite style hook ups. I got it all set up correctly now.
My main thing I always tell customers before you buy anything "plz" do your research. Study the product a bit first. It will save you so much time in the long run.
I’ve looked into them before and got a pretty good deal so we’ll see how it goes.
That new kitchen will be nice, someday🤔😣😤
Donald, we have part of it done! Still a long ways to go but we’re getting there!
That was a job fitting that bad boy on the tractor frame especially when it's so dang cold out, ha ha. Actually despite everything you seemed to have conquered it. Always something isn't there?
lol, cold it was not! Not sure why I picked two of the hottest days lol. But we got it!
Good work, Heath and Rachel! Did you ever get a cutting torch?
Jack, I have a cutting torch but need my oxygen refilled and have never been thought how to use it.
Iv seen a thumb attachment for those.
Tell you what that sub frame set up looks like a pain in the butt compared to other models that you just back up to and attach to the 3point hitch. I see that collecting rust after the novelty of it wears off.
I think I’ll end up with a thumb for it. I do know they tend to sit a lot but can definitely come in handy when needed.
👍
Thanks Will.
Ahh Rachel come on HA ha ha 😂😂😂
Thanks Ryan!
good video and job hope they fixed all the weak points. i rented a kubota back hoe it was way to weak and took forever. i could have did it all with a old case in a hour and not all day. wish you luck take care, be safe and well.
I think it should do great for what I need, time will tell
Looks like real life problems! wow. Yeah, show us what it can do!
For sure. We’ll put it to work soon!
What’s an estimate of the weight of the subframe and backhoe together?
I’d say about 1,300-1,400lbs together.
You’ll get a lot of use out of that backhoe. All of the power is in the curl function.
Thanks! I think I will.
What is that name of that green drink mix that you to drink. I forgot what video it was on.
AG1. Here’s a link to the video with the code to order. th-cam.com/video/OXsYg1J6g4Y/w-d-xo.htmlsi=CwTrefSyVP9Z_MX8
Utube pays great 😊
I wish! Been working a ton of overtime this summer!
GREAT SHOW GANG,
LIKE HEATH, I'M A SWEATER LOOKS LIKE A NATURAL SPRING COMING OUT OF MY HEAD, SOAK SWEAT TOWEL IN A MATTER OF MINUTES.
WANTED TO ASK ABOUT 3PT PALLET FORK ATTACHMENT, I HAVE BEEN LOOKING FOR ONE LIKE YOUR THAT HAS ADJUSTABLE FORKS TO FIT 3PT HITCH, HAVE NOT HAD ANY LUCK FINDING ONE. WAS WONDERING IF YOU MADE YOURS OR BOUGHT IT. IF YOU BOUGHT THEM, COULD YOU GIVE ME A LEAD TO THE COMPANY?
AGAIN, LOVE WHAT YOU ALL BRING US!
I bought them at a garage sale, they are home built though.
why not go with the trend, Chinese mini excavator, Ha.
I thought about that but figured this would give me fewer problems. I’ve noticed people are already selling the cheap minis.
If you don't know what you're doing... don't do it stop pretending!
Talk tooo much!
You’re right I should just sit home and do nothing. Trying new things is a terrible idea. I guess I shouldn’t even have a channel since I don’t really know much about filming, editing, or computers so by your logic I never should have tried?? Thanks for watching.
back hoe attachments are just a waste o money.. I would rather buy a cheap Chinese excavator then buy that crap attachment. the cheap new excavator in the end would have been cheaper and way way way better.. Good luck with that thing
Guess we’ll find out. I figured it’d be a lot less maintenance and repairs than a cheep mini.