Rebuilding A Toyota Hilux Rear Axle!!
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- Prismatic Powders: www.prismaticp...
Email me austin@avrcustoms.com
Bumper Plans/ Merch: avrcustoms.com/
Follow me on Instagram! / austinniemela
Redline Powder Coating Gun: amzn.to/3MV9qIy
Wheel Bearing Set: ebay.us/vMvbP4
Outer Wheel Seals: amzn.to/39tNZRh
Inner Wheel Seals: amzn.to/3tCEkP7
Pinion Seal: amzn.to/3xoVIIl
SEM Rust Shield: amzn.to/3NTtlsO
SEM Paint Hardener: amzn.to/3zyUooU
HVLP Paint Gun: amzn.to/3NZSQYW
Paint Gun Light: amzn.to/3aIl1xc
Camera equipment used in the video!
Sony A7II Camera: amzn.to/2yprn1p
GoPro: amzn.to/3ty94RJ
Tamron 28-75MM Lens: amzn.to/3EH6ufl
Tripod: amzn.to/2WjasJM
Send me stuff!
PO Box 133
Chattaroy WA 99003
Instead of welding that diff, assuming this is to be a street truck, I would put a Truetrac limited slip in there. That's what I did to my '92 and it's awesome.
Austin, trust me, watching your videos is one of the best moments of the day.
I would like to congratulate you on your perfect job and edition of your videos.
I have a channel where I restore old toys (Nylint trucks from the 60s) and I know how complicated is to filming without forgetting the key moments which make all difference. One more time, thanks for sharing, your job is awesome!
Thank you!! Yes working and filming can be a bit tricky from time to time that's for sure!!
So glad I found this chanel recently. Started with the transformation vids of the green and red truck and was amazed by his skill, and now i've watched every episode of this new build. Love chanels like this where you can actually learn, and be inspired to take on projects on our own trucks.
Welcome to the channel!! Im glad you are enjoying it!!
Again and as always. Another great video and enough to keep me / us looking forward to seeing what's next. I know you already see a finished product. The world is also eager to see a finished product.... that's what makes your videos good.
عمل رائع متقن بدقة عالية وبيئة عمل فاخرة.
Hell yeah man, i’ve learned how to rebuild an axle from you with the green pickup! And it doesn’t stop me from watching any of your videos! Thanks for the great content! 🔥
That is awesome! Thank you!!
This is so badass, wish I was 10 years older and already had a shop, lift etc to do this to my 91 Toyo Pickup 4x4. Great job man 👍
How about just put in a line lock?
Great job Austin, others may take notice. This is a great example of concise tutorial within a great shop environment without a lot of gibber jabber. Very thorough and above and beyond normal rebuild. I was just looking for a good representation of disassembly/assembly order for this subject of rear axle teardown and reassembly. As I am in process now on stepsons' 87 toyota pickup rear axle bearing and seals replacement. I am 40 year Aircraft tech, car and motorcycle enthusiast, mechanic.
Looks great buddy!
Thanks 👍
Great job man I want to see the truck finished and running
*Setiap videomu bisa dinikmati penonton, karena proses yang rinci dari pembongkaran, seni dalam pengelasan, pengecatan warna, sampai perakitan sangat memuaskan.* 👌
*PERTAHANKAN !*
I really enjoy all the attention to detail you put into these builds!
I know Australia is a long way from you but if you check hand brake cable kit for your hilux it should be available via Australia!
Love the builds you do.
Cheers from Sydney Australia MATE 🇭🇲👍🦘🐨👍🇭🇲🇺🇸🇺🇸
Paul you wouldn't have a link at hand would you...The whole Emergency brake systems hard ware are hard to chase down.
Epic! Great work so detailed. Excellent job mate!
When you take apart the rear end add disk brakes
Thank you Austin, for taking the time to show us some video clips of this rear axle transformation. Great job!
A little surprised you didn't do a rear disc conversion while you were at it.
Put an electric switched hydraulic brake line lock on it for an emergency brake, push the pedal in & push the button it's locked, push the pedal to disengage its so simple
Peace and satisfaction in a single video, good job a greeting 😎
You need to use a zinc primer with your powder coating.
Cost like $45 & they work even if it gets ran into it won't move ,I have disc brakes on the back of my 82 4×4 & no emergency brake cables to worry about, & it would make a great video too!
ahhh. i see how you made your press adaptor, using an old axle tube. That is the information that will make my life so much easier.
Yeah!! Game changer right there!
Adapt it to disk brakes! You won't regret it
this build really is perfect... love every step so far
good work dude
Thanks a ton!
Hey Austin. Absolutely lovin’ your videos mate. It’s a pleasure to watch. Giving me a lot of inspiration and ideas for my 2000 ln167r Hilux here in Aus 👍 keep it up!
Man I would kill for a shop like yours it’s so awesome with all your machines and tools I am so envious. Having the space and tools makes working on trucks so much fun. Keep up the great work and thanks for sharing 😎
I'm going to have to quit watching you my list for upgrades to my 91 is already long enough. Great video as always
Haha better get to work!! Thanks!!
I put bearing kits in and replace that crush collar before and that parts not bad. It’s intended for new bearings but I believe I’ve heard that some guys say you should replace that crush collar every time you retorque that nut. That’s what the crush collar does of courses is sets the on the preload on the bearings. I’m not sure though because for example on wheel-bearings you don’t torque an old bearing anywhere near as tight is you torque a new bearing. Once you’ve overtightened an old crush collar however I’m pretty sure it needs replaced as the way you describe the this one with your bearings tightening up.
With everything your doing to the truck are you sure you don’t want to do rest of the truck body wise,just saying.just keep doing your thing 👍👍👍😎😎😎
I know next to nothing about this stuff, but I can’t quit watching. Quality videos!
Thank you!!
I love these model yotas. Had an 85 with a 22r in it and we use to pull a wrestling ring built out of 2 inch square tubing that was about a few thousand pounds and it pulled it like it wasn't even there .
Cant beat these trucks!!
Nice job Austin, wish you were my neighbor! Really enjoy your videos, I too love old Toyotas.
I went to pickapart self serve wreaker and scored a LSD centre for my 89 Hilux for ...............$50 it was diff sale day! Get a LSD you can show us how to rebuild them..
Awesome work, Well done
I like that axle shaft pressing jig, pretty sharp!
Yeah it works sweet!!
interesting I like the restoration of classic cars, if you want you can install the system that lowers the automatic windows
SEM makes good products. 👍
Really happy w their satin black chip guard on my new custom grille & bumper.
It really layed down & hardened over about a week too.
I think I’m going to try their clear chip guard on my rockers, when I get my new paint done.
11:45 : did you put a gasket between these two metals?
What is the heat resistant green tape you used before baking the wheel hubs? I didn’t see any link in the description for it. Thanks😎
How long did it took you the whole restoration?
Ótimo trabalho, um abraço do Brasil 🇧🇷🇧🇷
We pretty much have the exact same tacoma setup. I need to jack mine up for long term storage, any recommendations for jack stands that will fit the lifted setup?
Just clicked on the new vid and surprise surprise, no youtube ads! That made my evening 😁
Also like the daily vid of the overall 👌
Are you gonna go turbo for the engine or just the restoration ?
Looks good love the detail of your video's
Love this Hilux rebuild....
Amazing work. Love it. Thank you for sharing. 😘
I would say to install a hydraulic E-Brake if you were doing a disc brake conversion!
Great Job man, i really enjoy Watching you struggle in the pick up 🙏🏻
That loooks soooooooo good 👍🏼
Nice work...
So I need to reseal my rear axle on my 89 because its leaking gear oil into the drums, is there any way to replace the seal without using a hydraulic press to remove the axle shafts? I've got the seals for both the axle and the backing plate, I would like to replace both at the same time.
Looking good, this looks like going all out
Awesome video! is this a 7.5 or 8" diff?
Austin 👍👍💚
FACTS 👍🏼
how much does a job like this costs. from removing the axle from the veicle and rebuilding the entire thing?
No wonder those Hilux last forever that axle looks like a fucking beast compared to modern cars
Nice work
What is the name of that clear green tape you use ? ( to many out there to guess )
Looks better than the stuff I use I want to try it !
Cool shit as always bro. If you bag it...no need for an E brake...just slam it!! 😆
Un éxito como siempre !!
Great video, ever consider building a bigger oven for powder coating?
Someday!
👍🏼👍🏼 looking good
Why didn't you replace the drums along with the shoes? Great work, can't wait to see the next video in the series!
Drums are good and I did new shoes!
Looking good 👍🏽
As always, builds are great!
Thank you!
Great job dude looks awesome!!!
Please don't weld the diff on that nice truck, limited slip instead
No e-brake....no toko drift.
😆
Love the videos on the hilux! What kind of media are you using in you blast cabinet if you don’t mind me asking?
I’m using 80 grit aluminum oxide! Thank you!!
Looking good Chilu
Did you find an e brake set up?
Great work, as always.
Do you have a video on how you made the axle removal tool? Really cool
Yeah one of my last axle rebuild videos I built it!
Saludos desde Santos Domingo república Dominicana
From my 1993 FSM, if the diff is 7.5 in then torque to 80 ft-lbf. If it's a 8 in diff then torque to 145 ft-lbf.
👍🏽🇺🇸👍🏽 was you a mechanic by profession? You know your way around all the stuff you do
Yes I do this full time!
I’m truly impressed by your ability’s.. love the channel
I definitely need to make one of those bearing puller for my t100 had to do one. Not fun when u don't have that tool
Make one for sure! I have done it without the tool and wow what a pain in the rear!!
Great job❤️💯
Spectacular job as always! Austin i really enjoy your videos..
Poderia traduzir os produtos pra nós brasileiros trabalho top
Traduzir a español too
nice content, at 02:16 when remove there is a thin rubber O rings (Like rubber band) in my hilux and in your video i dont see any. So is it ok if i install it without it
Yes all of these Toyota axles have those O rings!
@@austinniemela is it ok install the axles without the ring
Awesome videos, keep them coming! 👌🏼
Thanks! Will do!
Looks like a smaller ford 9".
I wonder if it's 90ftlbs if that crush washer isn't crushed?
Awesome
Check Toyota yard in Rancho Cordova Sacramento CA. For your break cable they might have it or LCE In Arizona. BTW AWESOME BUILD 👌 NICE SHOP I wish I was your neighbor almost done with my 87 pickup just dropping the motor in.
Thanks for the info!!
العربي يثبت وجوده بلايك😂
Lovely
Couldn't you do a LSD in the rear axle?
Good job, but it seems like a waste to powder coat the drums. You could just get new ones. Right?
Yes but new ones are bare so id powder those as well!
Does anyone make a rear disc brake upgrade for that? Just curious.
theres a guy in over in post falls that parts alot of toyota pickups he might have something i know he advertises on Facebook and craigslist
Better keep an eye on those rear brake temps. There is a reason drums aren't factory powder coated. The metal has to breathe for it to dissipate brake heat.
I have powdercoated or painted every drum I own and never a issue!
💪😎
👍
Have you tried rock auto and see if they have it I know they got a lot of old parts for all of our cars I don’t know if those have your every cables
Yes they have the main cable from the cab but not the other 2 cables
Headlamp on the spray gun!? You're living in 2024.
Pasión por el trabajo.
looking good i SUB
Доброго здоров'я привіт з Одеси Україна.