I just picked up an installed a six bike rack with my wife. We have this for a family of five. Buying in the US was great; Oregon was a bonus. This is a mom and pop business. Joe loaded the rack from his factory directly to my car. This is an in-house manufacture. And the rack is exceptionally engineered.
What secures the bottom of a very small kids bike? Or does it just swing freely? How secure from bump shakes are the bikes for when traveling off road.
From their website "Includes a beefy lockable anti-rattle hitch bolt for added security. This locks the rack to the vehicle". But I doubt it has security for bikes, probably purchase that separately.
You could grab from the middle but it’s much easier to take ones off the end first. If you leave space between the bikes (if you have less than 6) that would be the best way!
After using the rack for my family, it's not for everyone. It's probably best for mountain bikes and kids bikes. If you have panniers or fenders it's a hassle to protect them from getting damaged. Electric bikes are too heavy as it will only haul 50 pounds per rung. After the bikes are loaded you will find it's very heavy to pull the pin and pivot the rack for access to the rear doors or hatch. The rack takes two people to carry as it is heavy, so don't think that you will easily take it on and off the vehicle so we always just leave it on. I have a Chevrolet Suburban 2500. It was the best price for carrying more than four bikes as I purchased it gently used. I like that it's made in USA and it's sturdy.
Is there any issue with Cannondale Lefty’s like Scalpels? That has been my hesitation with vertical racks is accommodating that fork. Also, can you drop a full size pickup tailgate with it on or open a Jeep Wrangler door?
Shouldn’t be an issue since it’s by the bars! And they have a swing out in development, not sure about the wrangler because we have a sprinter lol. We would email them!!
Depends on the height of your vehicles hitch receiver, and size of your bikes rear tire. Lolo on a Transit 150 w 29ers: won't even drop to the lock point.
I have to take off the battery and front tire to get just under the 50 pound limit. I wrap towels around the hangers to protect the rubber hoses and my handlebars. It works but it's a huge hassle and then I have to wrap towels to protect the pannier. I'm gonna sell this rack, put the e bike in my Suburban and go back to my Hollywood platform rack.
One issue I can say having just started the video is the fact that the wheel is facing back which means when the tire catches on a bump (and it will) it will pull the shock into extension. Could be an issue damaging you frame or shock.
Way simpler getting the bike on! We’ve never heard of Tyler’s issue but we’ve had the rack on for 6 months and can say we’re sold on the handlebar hanging!
i have a north shore rack. It seems like the handlebar mount is more universal. One of my friends has an evil wreckoning and it is a super tight fit to get it into the cradle of the north shore rack. Since it is mounted by the fork crown and squeezed together with the frame of the bike, some bikes don't have much clearance when you turn the handlebars at an angle.
Velocirax is better. Faster to load and unload no part of your bike touches the rack but the tires and they have a 7 bike model (Which I have) That being said, Lolo is still a very good product.
Good yes. It's also 100 pounds to install and doesn't adjust to fit as many vehicles as our does. Also tires bounce around which could make your levers smack each other.
I did not have a good experience with this rack! The sharp edges on the water jet cut bar Hooks cut through the productive hosing after a very short time, 2 shuttle days, damaging the handle bars. The dh Hooks did not work at all unscrewing damper dials and Damaging the very tops of friends and my own stanchions. Definitely not the best rack at all!
One problem I see is the rear facing wheel means when the back wheel hits a bump which is a normal issue with these racks the force will pull the shock and opposed to push into it. Which then has the potential to cause damage to the shock or frame.
We’re having trouble visualizing this but we’ve had the rack on for 6 months with almost daily use and no issues! We would try to email them that question and maybe they can answer it better than us!
@@moandhannahtravel i mean I could ask them but of course as the manufacturers they will have a bias towards their product. On North Shore racks (I own the 2 bike version) the back wheel hand lower than the bumper and extend back from the bumper. What can happen is when vehicle goes over say a large speed bump or a sharp incline (say offroading) the rear can contact the speed bump or down slope of the groups. In the case of the North Shore rack the bike is facing "forward" and this contact would be against the rear wheel in the same manner as landing a jump ie compressing the shock. In the case of this rack the contact would be against the rear wheel from the "top" side and in effect the opposite direction of force the suspension is designed to handle. Its not an issue that would come up if one is driving smooth paved roads etc without speed bumps. But certainly if you are shuttling rougher fire roads or come across bigger speed bumps this seems like a potential issue.
ground clearance is a consideration with ALL vertical style racks. With our set up you can lean towards the vehicle thus picking up the bike and giving more ground clearance. Side note: these are the same carbon bars on my bike as when I started the company. No issues.
@@LoloRacksUSA I understand that and havent argued that North Shore style racks are not prone to clearance. In fact my point is they are prone to clearance issues as is your style of vertical racks. Which you rightly acknowledge. My point is full suspension bikes are designed to take forces from the bottom (ground) and to a less degree forward. In the NS style the rear wheel is such that in the event the rear wheel does clear an obstacle/ground the suspension would take the force as it is designed to do (from the bottom as the bottom of the bike is facing forward). In your design that force would be transmitted through the top of the wheel/swing arm which in effect would have forces extending the shock, which the bike is not designed to do. Hence why I raised the potential issue. In short you can damage a bike with any vertical rack (and you can find youtube videos of bikes not clearing etc) but with the bike facing forward as in NS style the suspension would likely compress. With the bike rear facing the shock cannot compress but would be forced to extend.
This may be a great product but the owner should get someone else that can actually promote his product. Kind of a safety feature? Holding it by the handlebar kind of work? Man I got no confidence out of that. Seems like a nice guy, but it would be good for the company to get someone that knows how to work the camera. -although at the he was more confident and I understood his comp culture.
Camera shyness is a serious thing!! Lol But we can tell you first hand, the rack has been solid too us for 6 months! We’ve put it through the ringer no issues!!
Follow LOLO racks on Instagram: instagram.com/lolo_racks_usa/
I just picked up an installed a six bike rack with my wife. We have this for a family of five. Buying in the US was great; Oregon was a bonus. This is a mom and pop business. Joe loaded the rack from his factory directly to my car. This is an in-house manufacture. And the rack is exceptionally engineered.
Super video! I applauded for $50.00 👏👏👏👏
Oh man thank you sooo much!!!!!!!!
Just got a lolo rack and was very happy with it. Very well made - has a custom option to clear rear tire carriers on bigger 4x4 as well.
what option? I just ordered the 6 and didn't see an option for that?
Oregon American 🇺🇸 made. Love it!
What secures the bottom of a very small kids bike? Or does it just swing freely? How secure from bump shakes are the bikes for when traveling off road.
does the rack have a security setup where it can be locked to your vehicle? bikes then can be locked to the rack? Thanks
From their website "Includes a beefy lockable anti-rattle hitch bolt for added security. This locks the rack to the vehicle".
But I doubt it has security for bikes, probably purchase that separately.
@@citizensauto it has provisions to add a cable and U-lock.
Drop bar bikes work?
Nice setup, American-made local co,. nice. Do you have to take the bikes off in order, start at end, or can you grab on in the middle ?
You could grab from the middle but it’s much easier to take ones off the end first. If you leave space between the bikes (if you have less than 6) that would be the best way!
After using the rack for my family, it's not for everyone. It's probably best for mountain bikes and kids bikes. If you have panniers or fenders it's a hassle to protect them from getting damaged. Electric bikes are too heavy as it will only haul 50 pounds per rung. After the bikes are loaded you will find it's very heavy to pull the pin and pivot the rack for access to the rear doors or hatch. The rack takes two people to carry as it is heavy, so don't think that you will easily take it on and off the vehicle so we always just leave it on. I have a Chevrolet Suburban 2500. It was the best price for carrying more than four bikes as I purchased it gently used. I like that it's made in USA and it's sturdy.
Will it work on beach cruiser?
Yes! But send us an email if you have really big swoopy bars.
What about opening the rear doors on Sprinter van?
The rack can tilt to clear doors but depends on your set up and bikes. We have a beefy option coming 2022 just for you.
Is there any issue with Cannondale Lefty’s like Scalpels? That has been my hesitation with vertical racks is accommodating that fork. Also, can you drop a full size pickup tailgate with it on or open a Jeep Wrangler door?
Shouldn’t be an issue since it’s by the bars! And they have a swing out in development, not sure about the wrangler because we have a sprinter lol. We would email them!!
We have an adjustable hook that will accommodate Leftys. The rack will clear truck tailgates and Jeeps. We have more options coming this year.
@@LoloRacksUSA thanks
these work well on a tacoma?
Is it bad on the shocks and bearings to be hung on the back by the tire?
It doesn't hang by the tire. It hangs by the handelbars. I've never had a scratch in four years.
LOLO Racks are legit! I've persuaded many friends to purchase these things!
Awesome rack for sure!!!
Hey maybe your the person he needs on his sales department. You seem to believe more in the product than the owner 😁
@@luisguevara4113 Hahaha! Hire me!
Be annoying to have to change the mount for DH bikes
They should bring out a 2 bike rack for the daily rider who isn’t shuttling in groups
They have a 4 bike rack that is awesome!!
Cool, wonder if it can pivot down to get in the back of the van without removing all the bikes?
It can! They also have a swing out in development!!
yes the rack can pivot part way or go all the way to the ground. We have options for vans. Our pivot doesn't block the van door.
Depends on the height of your vehicles hitch receiver, and size of your bikes rear tire. Lolo on a Transit 150 w 29ers: won't even drop to the lock point.
Just got one for the family. Would you guys recommend it for a 65 pound electric bike and two other bikes?
Probably. I wouldn’t recommend putting anything except the e-bike on it
If you take off the battery it might work
I have to take off the battery and front tire to get just under the 50 pound limit. I wrap towels around the hangers to protect the rubber hoses and my handlebars. It works but it's a huge hassle and then I have to wrap towels to protect the pannier. I'm gonna sell this rack, put the e bike in my Suburban and go back to my Hollywood platform rack.
@@bluegrassdna5572 you could use it for your non e-bikes but if you are mainly transporting a e-bike that’s probably the best thing to do
Wat the max weight per bike it can handle? Can it cary a ebike?
Max per hook limit is 50 pounds. Load E bike in the center of the rack. We recommend removing the batteries prior to loading.
Just looked at purchasing but shipping was $1000. That was more then what I had in the cart.
That’s probably a mistake! Send them an email!!
why would this be better than a north shore rack?
One issue I can say having just started the video is the fact that the wheel is facing back which means when the tire catches on a bump (and it will) it will pull the shock into extension. Could be an issue damaging you frame or shock.
Way simpler getting the bike on! We’ve never heard of Tyler’s issue but we’ve had the rack on for 6 months and can say we’re sold on the handlebar hanging!
i have a north shore rack. It seems like the handlebar mount is more universal. One of my friends has an evil wreckoning and it is a super tight fit to get it into the cradle of the north shore rack. Since it is mounted by the fork crown and squeezed together with the frame of the bike, some bikes don't have much clearance when you turn the handlebars at an angle.
@@tylerbruce5731 this has never happened to any of the thousands of customers we served.
Does “American Made” still apply if they’re made in Portland? 😂
Hahaha - that’s a fair question
The answer is a resounding NO. Surprised anybody from Portland has pride in America after what we’ve seen coming out of there in last few years.
does it work with road bikes?
Yes!
@@moandhannahtravel sickk i might needa cop one. cant carry roadies on my north shore and it's p annoying
It def can
You are going to sell a lot of these where I live. People are taking pictures of mine all the time
Nice! We ship all over the USA and Canada!
Velocirax is better. Faster to load and unload no part of your bike touches the rack but the tires and they have a 7 bike model (Which I have) That being said, Lolo is still a very good product.
Good yes. It's also 100 pounds to install and doesn't adjust to fit as many vehicles as our does. Also tires bounce around which could make your levers smack each other.
@@LoloRacksUSA how heavy is a 6 LoLo rack?
But why is it called LOLO? Or did I miss that.
"Lolo is Chinook language for "to carry"
I did not have a good experience with this rack! The sharp edges on the water jet cut bar Hooks cut through the productive hosing after a very short time, 2 shuttle days, damaging the handle bars. The dh Hooks did not work at all unscrewing damper dials and Damaging the very tops of friends and my own stanchions. Definitely not the best rack at all!
One problem I see is the rear facing wheel means when the back wheel hits a bump which is a normal issue with these racks the force will pull the shock and opposed to push into it.
Which then has the potential to cause damage to the shock or frame.
We’re having trouble visualizing this but we’ve had the rack on for 6 months with almost daily use and no issues! We would try to email them that question and maybe they can answer it better than us!
@@moandhannahtravel i mean I could ask them but of course as the manufacturers they will have a bias towards their product.
On North Shore racks (I own the 2 bike version) the back wheel hand lower than the bumper and extend back from the bumper.
What can happen is when vehicle goes over say a large speed bump or a sharp incline (say offroading) the rear can contact the speed bump or down slope of the groups.
In the case of the North Shore rack the bike is facing "forward" and this contact would be against the rear wheel in the same manner as landing a jump ie compressing the shock.
In the case of this rack the contact would be against the rear wheel from the "top" side and in effect the opposite direction of force the suspension is designed to handle.
Its not an issue that would come up if one is driving smooth paved roads etc without speed bumps.
But certainly if you are shuttling rougher fire roads or come across bigger speed bumps this seems like a potential issue.
ground clearance is a consideration with ALL vertical style racks. With our set up you can lean towards the vehicle thus picking up the bike and giving more ground clearance. Side note: these are the same carbon bars on my bike as when I started the company. No issues.
@@LoloRacksUSA I understand that and havent argued that North Shore style racks are not prone to clearance.
In fact my point is they are prone to clearance issues as is your style of vertical racks. Which you rightly acknowledge.
My point is full suspension bikes are designed to take forces from the bottom (ground) and to a less degree forward.
In the NS style the rear wheel is such that in the event the rear wheel does clear an obstacle/ground the suspension would take the force as it is designed to do (from the bottom as the bottom of the bike is facing forward).
In your design that force would be transmitted through the top of the wheel/swing arm which in effect would have forces extending the shock, which the bike is not designed to do.
Hence why I raised the potential issue.
In short you can damage a bike with any vertical rack (and you can find youtube videos of bikes not clearing etc) but with the bike facing forward as in NS style the suspension would likely compress. With the bike rear facing the shock cannot compress but would be forced to extend.
Guys, I don't see how the real rack is since all bikes cover the rack.
I'll stick with my ALTA Rack ;-)
Alta is an awesome company, really cool owner too!
This may be a great product but the owner should get someone else that can actually promote his product. Kind of a safety feature? Holding it by the handlebar kind of work? Man I got no confidence out of that. Seems like a nice guy, but it would be good for the company to get someone that knows how to work the camera. -although at the he was more confident and I understood his comp culture.
Camera shyness is a serious thing!! Lol But we can tell you first hand, the rack has been solid too us for 6 months! We’ve put it through the ringer no issues!!
Engineers seldom make great speakers.
🤘🤘🤘
Rock on Quinlan!
@@LoloRacksUSA will do