Cerium Oxide - What it is, How to mix and How to use. Easy to follow glass polishing process
ฝัง
- เผยแพร่เมื่อ 30 มิ.ย. 2024
- Learn how to mix and how to use cerium oxide. Easy to follow glass polishing solution for any glass surface. Suitable for use with any rotary polisher or electric drill.
Cerium Oxide product page: bit.ly/cerium-oxide
Felt Polishing Pad product page: bit.ly/polishing-pads
Deep Scratch Removal with a drill: • Glass Scratch Removal ...
Deep Scratch Removal with a polisher: • Glass Scratch Removal ...
If you have any questions, please contact us directly: contact@glasspolishshop.com - แนวปฏิบัติและการใช้ชีวิต
![ภาพนี้ก็ฮาเหมือนกันนะเนี้ย #1 SS8 [ พากย์นรก MEME.EXE ] | easy boy](http://i.ytimg.com/vi/Ytc50m91QK8/mqdefault.jpg)
Thank you for your time to do this video.
Maybe show you taking out a scratch with your compounds and a test against the white and brown or red compound
This is a great video that left me one question.: Is the 2-1 ratio mentioned in the video by volume or weight. It seems weight because of the small amount of water added to the powder. Just want to be sure. Thanks! BTW, this little jar of compound is a lifesaver!! I was going to buy a new tabletop which had an unbelievable $3,400.00 USD price tag. 36x60x0.5 and beveled.
VERY GOOD
Nice info
Thank you for saying toothpaste doesn't work. People keep repeating the old wive's tale. It's such a stupid thing to suggest, toothpaste is too soft!
What grit /silicon carbide disks do you use to remove scratches or etching, before polishing?
For scratches, you can use GlasX120 followed by GlasX60 and the final polish. For etching you might need to start with GlasNet200
glasspolishshop.com/abrasive-discs-pads/xnet-abrasives
Thank you for this guide. Is this process identical when removing light scratches from a mirror?
Yes, it is the same process.
I uses wool glass felt and put cerium oxide on it. After polishing I found swirl marks on the windscreen. Then I tried to fix up by using hard foam in order to remove the swirl marks. Theb after polishing the swirl marks became tjin but with huge amount of it. In the daylight I have no problem but at nigjt driving the vision isn't clear because of these swiro marks. Do you have suggestions how to remove these swirl marks? Should I polish again using glass wool felt to remove it?
The swirl marks could result from the dirt particles on the pad or the windscreen. Make sure the polishing area is spotless and then repolished. You can try reducing speed to about 1000rpm's and putting more pressure on the pad while polishing.
In general, we recommend using felt polishing pads instead of wool pads, as the wool pads may be too coarse for the job.
@@GlassPolishShop Several days ago I tried to repolish using felt pad and higher rpm (2000-2500 rpm). Tge swirl marks is reduced significantly, not really clear though but far better than before. I'll repolish again next time.
Can you please explain 2min30sec what is the difference in the fine grade and high grade, I have a scratch on a rear door window on a 2007 car, I can just feel my nail ever so slightly catching across it,
Many thanks
Andrew
The difference between the fine grade and the high grade is the average particle size, in general cerium oxide even in a high grade is not suitable for removing scratches from glass unless they are hairline fine scratches, grey in colour like ones that you cannot catch with your finger nail, cerium is a polishing compound used to remove abrasive marks after the scratch removal process using abrasives. It can be used to polish and restore hazy, dull or strained surfaces, it is also used to remove light etching or mineral deposits from glass. It can also be used on rocks, minerals, marble, ceramics, or metal.
just bought some,, fingers are crossed, I have light scratching from using an abrasive cleaning pad while in a jam,,,rusty water was sprayed on my truck from an old sprinkler system, To make it worste, I live in Fla. and this stuff dried up and I couldn't get it off. !!! Ugh,,,my fault , I shouldn't have waited, ty
After I used this on my window glass, if at night with my ceiling light on, I can see from certain angle, a stain mark on the window, is there a way to remove it
Hi, Yes you can. You will just need to polish the glass a bit more with the cerium oxide. This should remove the haziness you have.
Hi! Will the silicon carbide disc remove a deeper scratch from a glass ceramic cooktop?
Thank you
Steve R
Yes, you can use good-quality silicon carbide discs to remove scratches from the ceramic cooktop. If the scratches are deep, you will need to use a 3-stage sanding process starting with a coarse grit i.e P120 or coarse (depending on the depth)
Hi, I have followed the procedure on my windows glass. if I turn on the ceiling light at night, I can see a sort of stain on the window from certain angle, is there a way to fix it?
Hello, You may need to polish the area some more which should get rid of any haziness left over
The last time I used water proof abrassive cilicone carbide before use the ceria with spray the water in advance, but the rubishing result was not good.
When sanding glass, it's important to use high-quality silicon carbide discs to avoid leaving swirl marks on the surface. Cheaper, poor-quality discs can make the polishing process more time-consuming and difficult. Make sure you select the highest quality discs available to achieve the best results. If you have any questions or need recommendations, please don't hesitate to reach out to us. We're always happy to help.
It would of been nice if you showed us example and defects on glass and scratches.
Please check our other videos to see how to remove scratches from the glass.
Let's be blunt: if toothpaste was hard enough to remove imperfections from glass, it would grind your teeth to stumps in no time.
Toothpaste works with acrylic actualy, but indeed not glass.
You would be surprised how many peoples use toothpaste to polish the glass, hoping to remove scratches.
@@GlassPolishShop Indeed: I am horrified but not surprised! Have just taken delivery of some cerium oxide and some rotating buffers for a Dremel tool - now I just need to buy the tool !! It's amazing what you do to fix a cloudy wineglass!
I have a couple deep scratches in my plastic motorcycle windshield. Do you have any suggestions on what paste or product would "fill" these scratches? Thanks!
Thank you for your enquiry. To remove scratches from motorcycle windshield you can use our Headlight restoration kit or a Plastic & acrylic restoration kit:
glasspolishshop.com/plastic-acrylic-restoration/plastic-polishing-kits/plastic-and-acrylic-restoration-kit-do-it-yourself
glasspolishshop.com/automotive-care-repair/headlights-polishing/diy-headlight-and-tail-light-restoration-kit
I'm gonna guess maybe ceramiccoating. Has to be super clean .but then again have no idea what it would do to plastic
what happens if the glass is too hot ? will it break or scratch ? I mean the car windscreen.thanks
Than you for your inquiry, Yes the glass could crack if it gets too hot especially if you are working around the edges of the glass.
I was going to use a buffing/polishing machine. Would this be ok?
Hi, can you provide make and the model of the buffing machine please.
Can you show us how to get scratches of a glass hob please .
Please see the link below for our video on how to remove scratches from glass which is exactly the same process for a glass hob.
th-cam.com/video/Ou8eqmResNA/w-d-xo.html
you may have to be careful of the markings on the glass!
Why not exceed 2200 rpm? Is this due to the ability to polish or just to not remove / splash the cerium oxide
We feel that at this speed it gives the ability of the cerium to work and grip the glass without it speeding over the glass and not doing anything and also making the glass too hot when polishing .
One question I have is does it get ground down or over time, too powered so much, it is no longer effective?
I learned through trial and error not to make my paste too runny but i use a felt rotary head on a foredom flex shaft for stone polishing for jewelry stone. I need to change my system as I waste a LOT and have been doing this in a sink and it spashes everywhere!
Hello, thank you for your question. The Cerium will not go off after time and will be good for years to come. You need to make it up as a thick cream consistency and try to use a small amount at a time to avoid wastage. The cerium will dry out on your pad which you can reactivate by applying water to the pad.
Would this be a good choice to remove heavy wear / light scratches from china (dishes) or fired ceramic glaze? Porcelainized appliances, signs or bath fixtures?
It is hard to tell, we suggest getting the smallest jar 50g (1.7 oz) and run some tests to see if the results will be satisfactory.
If I see sort of a stain at night from certain angle after following the procedure, is there a way to fix it
Yes, the stain can be removed by the polishing process. You need a cerium oxide or glass polishing compound with a couple of felt polishing pads and an electric rotary device (drill or polisher).
Can this be used for remove minor scratches from phone screen ?
We have not tried this on a phone screen so unfortunately we cannot comment if it would work or not.
@@GlassPolishShopHeyy have you tried it yet?
@@ChadleyFreeman In general, cerium oxide can be used to polish mobile phones; however, it is effective only on the finest surface marks such as hairline scratches. It will not remove deeper scratches. Additionally, please note that the polishing process should be performed using a rotary device, as you will not achieve satisfactory results by rubbing it in by hand.
Can you help me sir.
Can cerium oxcide be turned into a paste?how do you that?
You need to mix it up with water.
@@GlassPolishShop thanks sir.
If i put on a bottle, how do i make it stay like a paste, not turn back into a solid.
@@cdbtchannel3936 if you prefer a compound form (cream) please check our pre-mixed glass polishing compound. We do two grades 1.2 microns and 2.3 microns
glasspolishshop.com/polishing-repair-compounds/glass-polishing
Would you use this on Rx lenses?
We do not recommend using it on the Rx Lenses as it can remove the coating from the lens
What temperatures are risky for windshields?
when polishing a car windshield try to keep the glass temperature below 48° C ( 118° F)
I am going to try it on a 100$ aquarium light scratch. If that's successful all give the 1000$ back windshield a go lol.
can you use an orbital polisher?
Thank you for your inquiry. If you wish to polish the glass, we recommend using a rotary polisher or electric drills.
Unlike a rotary which is forced to spin, a random orbit polisher actually rotates by the high-speed orbital motion, this can potentially cause more damage to the glass
@@GlassPolishShop interesting, ok appreciate it.
Please how can I get it ?
Am chatting from Nigeria
www.glasspolishshop.com
@@GlassPolishShop Good day. I need a cerium oxide polishing powder. How can I get it ? Chatting from Nigeria. Thank you .
Does it undone, when the windshield gets into heave rain?
I'm sorry, your question isn't clear. Could you please clarify what you mean by 'undone'?
@@GlassPolishShop does the cerium oxide come off in heavy rain ?
@@RajeshPhanindra Allow me to explain how cerium oxide works. You mix it with water and apply it to glass using a felt polishing pad. Then, you use a rotary tool to polish the glass, effectively removing damage (though it's not suitable for deep scratches). Once you are satisfied with the results, clean and wipe off the surface.
It's important to note that cerium oxide does not stay on the glass, so there is nothing to come off during heavy rain.
@@GlassPolishShop thanks. Sorry for my confusion
I thought that cerium oxide fills the minute trenches caused by the scratches
Ok I watched the video, but it doesn’t actual show the finished results. That is, do I keep polishing the window with the oxide mixture until the glass becomes completely clear?
Please check our other videos for before and after effects. This video is only about cerium oxide and how to use it.
What’s too hot for the glass?
It depends on the glass type: i.e. mirrored or laminated glass max temperature is 54° C (129°F), and Tempered Glass: is 82°C (179°F).
The best practice is to use the back of your hand and check the temperature during the polishing process. When you feel it gets too hot, take a break and let the glass cool down.
"Save the toothpaste for your teeth" - comment of the year!
Is it harmful?
No, it is not harmful, however, we do recommend using gloves as it might cause skin irritation.
Thanks! The Mic sounds terrible! 🙏