Thank you for your tractor tour and a little history on them. Being your Grandpa.had a couple different brand tractors on the farm, when he was looking for a tractor to do a job he was looking for functionality more than for a brand??
Thanks for showing us all your tractors Ross I've really enjoyed this series of videos. Would love to see your toy collection sometime. Are you going to the Mid Michigan Old Gas Tractor Association Show this year in Oakley, Michigan, this coming August? Looking forward to the next video. Best wishes. Peter 🇬🇧🚜
There were a lot o 3208 engines in my area back in the day, many experienced hard starting due to a worn seal on the throttle shaft where it enters the fuel injection pump and governor. The problem was worse on engines with the fuel tank lower than the governor but occasionally happen on engines with high mounted fuel tanks as well. Sometimes you would see fuel pooling up in the engine vee between the heads. not sure if that fits your situation just thinking out loud. Still enjoying your content keep em coming!!!!!
Lots of projects to tackle. You just gotta keep plugging away at them. I know its hard to get motivated when its cold and miserable outside. Im looking forward to seeing the 1355 and the 1955
😊😊 HI ROSS U can also push the fan belt in and make tight then pull the fan over 2 turn the engine over ross that tractor 🚜 😮 that doesn't want 2 run most likely the carb needs 2 be cleaned out I would tge points and condenser the rotor button and the distributor cap next would the coil is getting weak and breaking down and not carrying the current like it should 😮😮/ ross alot of the old school mechanics aren't working alot at the shops no more they have being doing that kind of work 5O years or more 😊😊 OMG 1 26 2O25
I’d like to see what is left of that hart-parr manifold, I’m no expert but I’ve brazed together some pretty rough castings for the Amish neighbors. I maybe could give it a try.
Ross I got to hand it to you you bendover backweard to put your viewer stuff no matter how cold walking the fence on the ice their are some on here I have watch for a very long time now they have their viewers built up now they are cutting how much content they are putting on and going to start traveling the and having a big oh time well I am going to ditch them keep up the good work I just wanted conmend you besafe❤❤❤😅.
I wish you would slow down on buying, and just focus on fixing one factor at a time till you make it better, instead of all the jumping around, understand when it's customers tractors
Love the stories and the history.
Another great video Ross. I totally love the history on these tractors. Buddy seems to be in all his glory. Thanks for sharing.
Enjoyed that !!
It would be great if a building company would build a 100 x 300 building to put your stuff in as a promotional item for advertising
Buddy The Dog, always living his dream life!
These stories are nice, I like them.
Good video as always I vote to see ur salvage yard for a future video
I really like all the history of all your tractors! Thank you!
👍👍👍👍👍
Another tractor story video, always enjoy them. Great video Ross.
Thank you for your tractor tour and a little history on them. Being your Grandpa.had a couple different brand tractors on the farm, when he was looking for a tractor to do a job he was looking for functionality more than for a brand??
Thanks for showing us all your tractors Ross I've really enjoyed this series of videos. Would love to see your toy collection sometime. Are you going to the Mid Michigan Old Gas Tractor Association Show this year in Oakley, Michigan, this coming August? Looking forward to the next video. Best wishes. Peter 🇬🇧🚜
I remember the threats to the sears handyman special 🤣🤣 It will be cool seeing the 1955 project
I enjoyed the history lesson you have a great collection
Thanks for the tour. Next you should do a history of all the equipment you have. I think viewers would enjoy that also.
I’ve hung on every word during your history presentations, not boring at all. 😊
I luv hearing all the stories about your tractors
Thanks for videos
There were a lot o 3208 engines in my area back in the day, many experienced hard starting due to a worn seal on the throttle shaft where it enters the fuel injection pump and governor. The problem was worse on engines with the fuel tank lower than the governor but occasionally happen on engines with high mounted fuel tanks as well. Sometimes you would see fuel pooling up in the engine vee between the heads. not sure if that fits your situation just thinking out loud. Still enjoying your content keep em coming!!!!!
Thanks for video of your tractors
Some really neat tractors there, I like hearing everything that you had to go through to get them. Thanks for sharing, have a good day!
I think the RU and HU’s used the same fenders, the LU’s were shorter, if I remember right. Those look like the same fenders that is in my 1020 RU
You have plenty of projects to work on Mr.
Ross! Great video!
Does that white 1355 still have that rear pump that the loader ran off of???😮😮
Love tractor tales!!
Oliver is your thing and that's great but it's cool that you have a little bit of everything and I think that is really cool.
would love to see some vids on the combines and some of the more RARE implements
Ross, I do remember some of those tractors when you showed them. Thanks Michael
Lots of projects to tackle. You just gotta keep plugging away at them. I know its hard to get motivated when its cold and miserable outside. Im looking forward to seeing the 1355 and the 1955
As Bob Hope always had for his theme song, "Thanks for the Memories"
Buddy sure does have a " RUFF " life
I’ve been looking forward to the 70 on steel project. Would be neat to do a will it start video on the Co-op tractor too sometime.
😃😃😃😃👍👍👍👍👍👍
You need tell story how buddy came to be..
Fun video bout tractors
Thinking about buying my first Oliver 1650 gas or diesel row crop debating any help
😊😊 HI ROSS U can also push the fan belt in and make tight then pull the fan over 2 turn the engine over ross that tractor 🚜 😮 that doesn't want 2 run most likely the carb needs 2 be cleaned out I would tge points and condenser the rotor button and the distributor cap next would the coil is getting weak and breaking down and not carrying the current like it should 😮😮/ ross alot of the old school mechanics aren't working alot at the shops no more they have being doing that kind of work 5O years or more 😊😊 OMG 1 26 2O25
❤
I’d like to see what is left of that hart-parr manifold, I’m no expert but I’ve brazed together some pretty rough castings for the Amish neighbors. I maybe could give it a try.
Wow you got of alot of tractors . Only I know you prolly going to have half projects done. It is time consuming to work on them.
Why don’t you have a super 99
Ross I got to hand it to you you bendover backweard to put your viewer stuff no matter how cold walking the fence on the ice their are some on here I have watch for a very long time now they have their viewers built up now they are cutting how much content they are putting on and going to start traveling the and having a big oh time well I am going to ditch them keep up the good work I just wanted conmend you besafe❤❤❤😅.
Naa "Red Tiger".engine
Random comment
The left steering rod repair on the 9650 was one of your first videos I watched as I recall. th-cam.com/video/7huMFVAv0gQ/w-d-xo.html
I have cockshut 20 widefrront restored $5000
I wish you would slow down on buying, and just focus on fixing one factor at a time till you make it better, instead of all the jumping around, understand when it's customers tractors