Good spring day. Wonderful video and clear instructions, but I do have a few finishing questions starting at the 7 1/2 minute mark. I see that there’s a little bit of overspill on the back of the earring, after it has been cured. 1. Do you do normally any sanding ? If so, what kind? 2. Do you do any sealing? If so, what kind do you use? 3. Any idea how much they actually weigh? Thank you for your time and consideration, I will continue to look at more of your videos. CHRIS
If there is anything that has spilled over you can sand it afterwards, just a very fine grit sand paper. I don't seal my resin and I do wear these earrings without any issues. They are incredibly light, basswood is ideal for earrings because they won't weight you down.
I have a XTool S1 20w on order. I have been watching a lot of videos for the different projects I can do with the lasers. My question is to connect laser to computer via USB … does the laser come with the connecting cord or do I need to purchase the connecting USB? If I do can you tell me what type of cord I need, USB both ends as example. I know you have reviewed the S1, so can you tell me what electrical amps the S1 uses? I have to use an extension cord and I want to make sure I have one that will handled the load. Your videos are so helpful and you are a great instructor.
I connect my machines via USB and they all come with a cord. You can buy a USB extension if your machine is further away but you may not need it. The S1 and others like it operate on a standard 120 volt US outlet and they can run on an extention cord. You'll need an extention cord that can handle the 3 pronged plug. Hope this helps, enjoy your machine!
Wonderful idea, thanks for sharing
Good spring day. Wonderful video and clear instructions, but I do have a few finishing questions starting at the 7 1/2 minute mark. I see that there’s a little bit of overspill on the back of the earring, after it has been cured.
1. Do you do normally any sanding ? If so, what kind?
2. Do you do any sealing? If so, what kind do you use?
3. Any idea how much they actually weigh?
Thank you for your time and consideration,
I will continue to look at more of your videos.
CHRIS
If there is anything that has spilled over you can sand it afterwards, just a very fine grit sand paper. I don't seal my resin and I do wear these earrings without any issues. They are incredibly light, basswood is ideal for earrings because they won't weight you down.
I have a XTool S1 20w on order. I have been watching a lot of videos for the different projects I can do with the lasers. My question is to connect laser to computer via USB … does the laser come with the connecting cord or do I need to purchase the connecting USB? If I do can you tell me what type of cord I need, USB both ends as example. I know you have reviewed the S1, so can you tell me what electrical amps the S1 uses? I have to use an extension cord and I want to make sure I have one that will handled the load.
Your videos are so helpful and you are a great instructor.
I connect my machines via USB and they all come with a cord. You can buy a USB extension if your machine is further away but you may not need it.
The S1 and others like it operate on a standard 120 volt US outlet and they can run on an extention cord. You'll need an extention cord that can handle the 3 pronged plug. Hope this helps, enjoy your machine!
@@SarahVanderkooy Thank you very much. Very helpful!
Awesome tutorial! Where do you get your basswood? Thanks!
Amazon! I've had good luck with this one. It's great quality and in good condition. amzn.to/4aSg9yZ
Hi, With the uv resin do you need to wear a protective mask/respirator? Great video by the way.
No, it does not give off the same fumes as epoxy resin. But do wear gloves because it can irritate your skin.