ฝัง
- เผยแพร่เมื่อ 19 ก.พ. 2018
- OTRAMM is an independent Toyota, Lexus, and Subaru repair shop in Bealeton Virginia. Contact us today for your repair, maintenance, and modification needs. www.otramm.com
Today on Tuesday's Tool we show how we use our fuel injector cleaner to help a set of Land Cruiser injectors flow better.
www.otramm.com
If you'd like to support out channel please consider visiting out Patreon page and merchandise page. Thanks!!
/ otramm
reefmonkey.com/collections/ot... - ยานยนต์และพาหนะ
To even up the variation i buss the injectors two to three times in the ultrasonic bath. And normally that closes the differences.
That's neat. My first car was a 1972 Volkswagen bug with a carburetor. Rain was a big problem with that design.
Por eso tienes mas material en los injectores del medio!
What is the solution used for cleaning and testing Injector?
What chemical do you use in your injector cleaning machine?
Cuestion sr where you get the red fluid thanks
buenas cual es la marca y modelo del banco de prueba?
Is this with micro filters removed??
Is the wiring harness that is provided a universal fit or do you need different fuel injectors wire hardness connectors for various vehicles?
Can you back flush the injectors, how do you do that?
It came with the harness. I've only used it on Toyota injectors. It's fit all of them so far. It doesn't have any way to back flush.
@@OTRAMM Thank you for the fast reply. Does the wiring harness have a quick disconnect so that it can be interchanged
to other wiring harness for other vehicles. I have three different vehicles here two of them have electrical connectors
where the older vehicle has a CIS mechanical fuel injectors no electrical connections. Would your machine be able to clean
those too?
BTW your video is outstanding.
What kind of fluid are you using for testing and cleaning?
For the ultrasonic Simple Green Aircraft extreme. In the flow portion Techron fuel injector cleaner.
Thanks a lot man. What do you charge to clean them and test them? and how much is the equipment?
We don't clean them as a separate charge. It's bundled in to big repairs like head gaskets. The tool wasn't to expensive. Maybe 500?
What injector tester is this
How do I empty the test tubes of the injectors?
They just flip up and dump back in to the reservoir.
Can you reuse the fluid when youre done flow testing?
I'm not sure if you're supposed to, but we do.
I bought 1 after i watched this and the manufacturer suggested to change fluids every 3months of use. Or if there is a significant change in color.
Btw how much pressure are you running?
@@cocoloco1994 I think around 60psi
@@OTRAMM hi what fluid do you use for the flow test and the ultra sonic pan
Have you every replaced pump in your machine if so what pump you use
I have. I used a generic denso in tank pump. I can't remember what it was made for though.
What do you use for the ultrasonic cleaner fluid, and the flow test fluid?
Simple green aircraft extreme and water in the ultrasonic. Marvel mystery oil cut with techron in the flow tester.
@@OTRAMM thanks, I wondered.
How/why did you choose these fluids? I’ve heard many recommendations for 75% or greater isopropyl alcohol as a test fluid
I was more after cleaning than a test fluid that would mimic gas. I liked the oily residue of marvel mystery oil to keep things from corroding before install. It was too viscous for the tester on its own so I cut it with techron. Nothing scientific, just what was readily available in the parts room.
I just purchased a 04 LX. Is it common to have a gas smell in the engine oil?
Can't say that I've ever noticed a gas smell in the oil.
OTRAMM any ideas how gas could leak into oil?
Best guess would be a leaking fuel injector dumping fuel.
@@OTRAMM Thanks. On a related note, I have 8 12-hole injectors that I wanted to install. Do you have any tips on how to replace fuel injectors? I am hoping for some tips on how to drain the fuel lines prior to install...
Where did you buy this and how much? Have seen some similar on eBay and amazon, but looking for a good one for home use around $500 thanks
I'm pretty sure it was from Ebay. I want to say it was around 400 but it's been a few years since I bought it.
OTRAMM I seen on another comment about what you use, how much of the simple green aircraft extreme to water do you use and same about what you use for flow testing. Or are you using different solutions now? Thank you
It's been forever since I've used it. The aircraft extreme I use straight and top off a bit with water as I spill stuff. The flow tester I use a big bottle of mystery oil but with a bottle of 44k or other injector cleaner. The mystery oil is too thick on it's own to get a good spray pattern. They make actual test fluid for them but I don't use the machine often enough to bother.
OTRAMM thanks for all your help, do you know which brand or model cleaning machine you have? Maybe they don’t have that exact one on eBay any more thank you
It doesn't have any part numbers on it unfortunately.
Excuse me, can I test GDI injectors by this device?
I don't think so. GDI is higher pressure.
Is that a cleaning fluid that is used?
The red fluid is a mix of marvel mystery oil and BG44k the marvel is too thick on it's own but I like the oily coat it leaves. The ultrasonic has simple green aircraft extreme and water.
OTRAMM what’s the mixture of the simple green and water
Dumb question here ,i see six injectors ,if i need to clean 8 will the machine allow the extra 2 to be cleaned by them self ,reason im asking is im wanting to purchase this machine
Yes it has plugs to block off the extra holes so you could do two batches of four.
@@OTRAMM
were they really that dirty or is that just the color of the fluid?
The fluid is a funky color. It's a mix of marvel mystery oil and techron
Seen it on Ebay and I have been wanting to buy one for my motorcycle shop but I can not get straight answers from the ebay supplier as to what chemicals to use for cleaning and testing. What are you using and how has the machine worked for you.
We use simple green aircraft extreme in the ultrasonic portion. I use techron injector cleaner in the flow tester. We don't use it enough to buy the real calibrated fluid. You have to be careful of fire using the techron though. I've been happy with it. The pump died after about two years but it's just a generic high pressure fuel pump so an easy fix.
@@OTRAMM Thanks for the info.
Could you pls help make review videos for us?
How much cost this injector tester
It's been years since I bought it so I'm not sure. I think it was less than 500.
I am thinking of buying one of this machines what brand it this machine?
No idea, it's just a random Chinese fuel injection cleaner from Amazon.
@@OTRAMM does still work? It does a good job cleaning the injectors?
It's finicky. It does what we need it to. We don't use it a ton.
@@OTRAMM oh okay cool..
كيف يمكنني الحصول علي الجيهاز ؟
وكم ثمنه ؟
بحدود ألف دولار صناعة صينية والأسعار متفاوته .. يمكن شراؤه من مواقع البيع في النت مثل ايباي امازون او تبحث عن موردين في منطقتك ..
“?”
Se te olvido espulagar primero el rail!