Hunting Blind made from IBC Totes - Super Cheap! This Little Shooting Shack even has Indoor Plumbing

แชร์
ฝัง
  • เผยแพร่เมื่อ 19 ธ.ค. 2024

ความคิดเห็น • 74

  • @dana44169
    @dana44169 ปีที่แล้ว

    What a great job,it just shows what you can do with a little plan,preparation,and a purpose in mind.Really enjoy watching your videos,looking forward to the next one

    • @mountainbuck
      @mountainbuck  ปีที่แล้ว

      Thanks so much Southern Preacher! I appreciate the support 👍🏻

  • @davidthompson1529
    @davidthompson1529 3 ปีที่แล้ว +2

    I did the exact same thing w the plumbing on a hard side blind last yr. That is a great shack! Well done. Good luck this season.

    • @mountainbuck
      @mountainbuck  3 ปีที่แล้ว

      Hey David, thanks for the positive feedback! The plumbing really comes in handy haha. I recently made a new blind out of a 1,000 gallon water tank and I’m loving it. Best of luck to you as well this season 👍🏻

  • @kevinburgess6112
    @kevinburgess6112 4 ปีที่แล้ว +2

    video quality is more the sufficient, thanks for sharing your great idea

    • @mountainbuck
      @mountainbuck  4 ปีที่แล้ว

      Hey Kevin, thanks for the positive feedback! Much appreciated!

  • @dhanoa53
    @dhanoa53 ปีที่แล้ว +23

    The blind is easy to put up and take down. th-cam.com/users/postUgkxvlQxmcZQzSQSYbJsEgAGvG2DaduKTV99 As a female hunter, the ease of placing and setting up the blind is a plus. It’s more of a wind barrier than a warm quilted blind. Which makes it a lot lighter than our quilted blind. I enjoyed the larger windows/openings. Made for a successful season. It has held up well for the first season and the stitching looks good.

    • @mountainbuck
      @mountainbuck  ปีที่แล้ว

      Hey thanks for watching! It’s definitely only big enough for one person (and not a big person)

  • @reaping_rager5231
    @reaping_rager5231 2 ปีที่แล้ว

    this is by far the best set up for little cost good job man. youve given me a few good ideas for my next stand, keep up the great work and happy hunting\

    • @mountainbuck
      @mountainbuck  2 ปีที่แล้ว

      Hey thanks so much, Reaping_Rager. I appreciate the positive feedback! Here are a couple more of my blind builds if you are interested th-cam.com/video/gJ_4Sr0GdpA/w-d-xo.html th-cam.com/video/qeKQ0TlumRU/w-d-xo.html

  • @papawed489
    @papawed489 4 ปีที่แล้ว +1

    Nice setup. May have to still your pool noodle idea.👍👍👊

    • @mountainbuck
      @mountainbuck  4 ปีที่แล้ว

      Thanks for checking out my channel papaw Ed! Steal away! 😬

  • @awbernardy
    @awbernardy 4 ปีที่แล้ว +2

    That is a AWSOME set up you made with a little $$$$
    I just might have to make one of these too

    • @mountainbuck
      @mountainbuck  4 ปีที่แล้ว

      Hey Adam, thanks so much and thanks for checking out my channel!!!

  • @bryanmcpherson3576
    @bryanmcpherson3576 9 หลายเดือนก่อน

    Had mine for over 5 years and still going strong

    • @mountainbuck
      @mountainbuck  9 หลายเดือนก่อน

      That’s awesome! Thanks for the feedback👍🏻👍🏻👍🏻

  • @campbellmarty36
    @campbellmarty36 3 ปีที่แล้ว +1

    Well .... post Covid.... these little jewels in my area are now fetching in $100 a PIECE range!☝️🙄... that $200 will go a LONG way on new supplies!!!. Maybe I’ll get luck and find some cheaper!!!. Great idea indeed ☝️👍👍!!

    • @mountainbuck
      @mountainbuck  3 ปีที่แล้ว

      Hey Campbell73, thanks for checking out my channel! Holy smokes! At those prices you’re better off building one of these: th-cam.com/video/gJ_4Sr0GdpA/w-d-xo.html - a much easier build and much more room. Best of luck this season 👍🏻

  • @OffTheGridAdventures
    @OffTheGridAdventures 4 ปีที่แล้ว +1

    That a great idea! Thanks for sharing!

    • @mountainbuck
      @mountainbuck  4 ปีที่แล้ว

      Hey Off the Grid Adventures! Thanks for checking out my channel!

  • @HangImHigh
    @HangImHigh 2 ปีที่แล้ว +1

    How many cans of paint ? And also did you paint the inside?

    • @mountainbuck
      @mountainbuck  2 ปีที่แล้ว +1

      Hey David! Thanks for checking out my channel. I believe I used a total of five cans or so for this build and yes, I painted the inside black👍🏻

    • @HangImHigh
      @HangImHigh 2 ปีที่แล้ว +1

      @@mountainbuck nice thanks i’m getting started on mine this week

    • @mountainbuck
      @mountainbuck  2 ปีที่แล้ว

      @@HangImHigh That's awesome man! Here is a full build video that might help th-cam.com/video/qeKQ0TlumRU/w-d-xo.html
      Best of luck!!!

  • @tonydize3944
    @tonydize3944 3 ปีที่แล้ว +1

    Nice i like the urinating thing i would use something like that

    • @mountainbuck
      @mountainbuck  3 ปีที่แล้ว

      Hey thanks Tony! I appreciate it!

  • @edwfd356
    @edwfd356 4 ปีที่แล้ว +2

    I’m gonna get a porta John thanks for the idea

    • @mountainbuck
      @mountainbuck  4 ปีที่แล้ว +1

      Hey Eddie, thanks for checking out the channel! I thought of that too! Great idea!!! 👍🏻

    • @shandonmeadows8620
      @shandonmeadows8620 4 ปีที่แล้ว +2

      Might just be the best idea yet! Being able to sit in my office, and take out a deer at the same time?! Count me in!

  • @maxfriedenberger8043
    @maxfriedenberger8043 3 ปีที่แล้ว

    another awesome idea

  • @isaacwalton7283
    @isaacwalton7283 4 ปีที่แล้ว +1

    I got a couple stands like this. We stacked 3 of the metal outside of them and on the top one I used the plastic piece for the blind

    • @mountainbuck
      @mountainbuck  4 ปีที่แล้ว

      Nice! That’s interesting!

  • @rubenrenegado3355
    @rubenrenegado3355 3 ปีที่แล้ว

    Nice job man 👍

    • @mountainbuck
      @mountainbuck  3 ปีที่แล้ว

      Thanks, Ruben! Much appreciated 👍🏻

  • @btwarner2124
    @btwarner2124 4 ปีที่แล้ว +1

    Very cool man.

    • @mountainbuck
      @mountainbuck  4 ปีที่แล้ว

      Thanks BT! Appreciate the feedback!

  • @foryourentertainment1109
    @foryourentertainment1109 ปีที่แล้ว

    Great job.

    • @mountainbuck
      @mountainbuck  ปีที่แล้ว +1

      Thanks so much! I appreciate it 💪🏻

    • @foryourentertainment1109
      @foryourentertainment1109 ปีที่แล้ว

      @@mountainbuck I have been thinking about doing this. Lucky me, I found your video. Once again, awesome job.

    • @mountainbuck
      @mountainbuck  ปีที่แล้ว +1

      I have a more detailed version in case you are interested. Thanks again👍🏻

  • @billy19461
    @billy19461 4 ปีที่แล้ว +1

    Love it!

    • @mountainbuck
      @mountainbuck  4 ปีที่แล้ว

      Thanks billy19461! Appreciate the feedback!👍🏻

  • @TheSkinking
    @TheSkinking 4 ปีที่แล้ว +3

    I made one 5 years ago. i used it every year. but up here in Saskatchewan it gets really cold, so you have to run a heater constantly in there, and just a tiny window to hold your heat. Then i found it sweated and dripped on you, needed to put insulation on top and box it in. The worst though is that it is cramped and hard to spend 5-6 hours in

    • @mountainbuck
      @mountainbuck  4 ปีที่แล้ว +1

      Hey TheSkinKing, thanks for checking out my channel! Yeah, these things definitely don't offer a lot of room! That's interesting that you've insulated it further (I put some spray insulation in any cracks and connections). I bet it helps in that super cold up north!!!

  • @kylesteinkuhler7322
    @kylesteinkuhler7322 24 วันที่ผ่านมา

    How big are the wheels and did you mount them to the metal frame? Anything over the roof? Wondering if snow would be too heavy at times

    • @mountainbuck
      @mountainbuck  24 วันที่ผ่านมา

      Hey thanks for watching! I’d probably skip the wheels and just drag / haul in place. I haven’t had any trouble with snow and it’s been out there a few years at this point.

  • @dereckbeaupre
    @dereckbeaupre 2 หลายเดือนก่อน

    Can these be build with out the metal cage? And why do u need the cage?

    • @mountainbuck
      @mountainbuck  2 หลายเดือนก่อน

      Hey thanks for watching! I’m not sure it would hold up so well without the metal. If you wanted just plastic, I’d go with a bigger water tank and cut windows and a door out of it (I have a couple videos on that design as well).

  • @raymondhoagland4976
    @raymondhoagland4976 4 ปีที่แล้ว +3

    Love it, Great job !!!

    • @mountainbuck
      @mountainbuck  4 ปีที่แล้ว

      Hey thanks Raymond! I appreciate it!!

  • @colequick6136
    @colequick6136 2 ปีที่แล้ว

    Could you do or show a video on how the door was made and framed?

    • @mountainbuck
      @mountainbuck  2 ปีที่แล้ว

      Hey Cole, thanks for checking out my channel! I’d have to take some video in November as the stand is around 5 hours away. I basically cut the plywood to fit and installed hinges in the aluminum frame and door (then added the sliders for the window)

  • @nathanrasbaugh7873
    @nathanrasbaugh7873 4 ปีที่แล้ว +1

    5:15 - Where did you get the pieces of molding for the window? Where could I purchase something like that?

    • @mountainbuck
      @mountainbuck  4 ปีที่แล้ว

      Hey Nathan, thanks for checking out my channel! Hook me up and hit subscribe, if you could! I got the molding for the plexiglass window from Home Depot. Here is a link to product: www.homedepot.com/p/Stabilit-855-1-4-in-x-1-3-8-in-x-96-in-PVC-Composite-White-FRP-Divider-Moulding-10002-ZW096CB/205347156

  • @hunter69707
    @hunter69707 4 ปีที่แล้ว +1

    Nice!

    • @mountainbuck
      @mountainbuck  4 ปีที่แล้ว +1

      Thanks Clark! Also, thanks for checking out my channel!

  • @stevenhallo3629
    @stevenhallo3629 4 ปีที่แล้ว +1

    Did you cut the top off both of the plastic part of the totes

    • @mountainbuck
      @mountainbuck  4 ปีที่แล้ว

      Hey Steven, thanks for checking out my channel! Hook me up and hit subscribe if you could! Check out minute 1:10 of the video. This shows how I cut both totes. I cut the bottom plastic on one tote and the top plastic on the other. I kept the valve for the bottom, so I could run the piping to the ground and kept the top screw piece as the very top of the blind.

  • @michaelkay3945
    @michaelkay3945 4 ปีที่แล้ว +1

    Where did you get your molding for the plexiglass?

    • @mountainbuck
      @mountainbuck  4 ปีที่แล้ว

      Hey Michael, thanks for checking out my channel! Hook me up and hit subscribe, if you could. I was walking through the moulding aisle at Home Depot and found something that I thought would work. It was something like this (maybe even this exact item): www.homedepot.com/p/Stabilit-855-1-4-in-x-1-3-8-in-x-96-in-PVC-Composite-White-FRP-Divider-Moulding-10002-ZW096CB/205347156

  • @twinsoutdoors2247
    @twinsoutdoors2247 4 ปีที่แล้ว +1

    Awesome!

  • @carfvallrightsreservedwith6649
    @carfvallrightsreservedwith6649 ปีที่แล้ว

    The cage can be unscrewed from the base negating the need to cut it.

    • @mountainbuck
      @mountainbuck  ปีที่แล้ว

      Thanks for the heads up! I appreciate you watching and for the info👍🏻

  • @A.C.71
    @A.C.71 3 ปีที่แล้ว

    Great idea. May I suggest hooking the end of the urinal pipe to a container and seal the connection..when you leave the stand take the container with you, you don't really want to put your human piss scent around your deer stand.

    • @mountainbuck
      @mountainbuck  3 ปีที่แล้ว

      Thanks for the feedback 👍🏻

  • @hunterhorton3492
    @hunterhorton3492 ปีที่แล้ว

    How much room do you have to move around

    • @mountainbuck
      @mountainbuck  ปีที่แล้ว

      Not much room at all. If you’re a bigger dude, it probably won’t work for you.

  • @mountainbuck
    @mountainbuck  3 ปีที่แล้ว

    - Check out the IBC Tote Hunting Blind full build video: th-cam.com/video/qeKQ0TlumRU/w-d-xo.html
    - Also be sure to watch the Water Tank Hunting Blind build here: th-cam.com/video/gJ_4Sr0GdpA/w-d-xo.html

  • @flushot6513
    @flushot6513 10 หลายเดือนก่อน

    Lol awesome

    • @mountainbuck
      @mountainbuck  10 หลายเดือนก่อน

      Haha thanks man👍🏻

  • @domingocaracciolo1861
    @domingocaracciolo1861 4 ปีที่แล้ว

    Un km mi