PRS BITS FOR DAYSTATE ALPHA WOLF AND BRK GHOST

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 ม.ค. 2023

ความคิดเห็น • 36

  • @quartelli
    @quartelli ปีที่แล้ว +1

    the 3D printed part you describe was probably ABS printed filament exposed to a acetone bath which slightly melts it for a smooth finish. Either that or an SLA resin print and coated in epoxy resin. Both very easy and inexpensive.

  • @quartelli
    @quartelli ปีที่แล้ว +1

    How on earth have you only got 3.58k subscribers. Such an in depth review and expertly delivered.

  • @alanmullock381
    @alanmullock381 ปีที่แล้ว +1

    My impact wears PRS bits, can't fault 'em for quality or price, excellent gear!👍👍👍👍👍👍👍👍👍😎😎😎

  • @briancollins1078
    @briancollins1078 ปีที่แล้ว

    Great Review, I’ve purchased all the accessories last year for my Daystate Alpha wolf 22 calibre fantastic air rifle. Just need the Daystate Alpha wolf sticker for the bottle looks the business 👍

  • @randycombs112
    @randycombs112 ปีที่แล้ว

    Your right. Quality for sure. Been using prs on a few of my rifles. Including my DAC alpha. But take butt piece off for hunting. They are appropriate for bench and FT. But when it comes to hunting I want to be able to bring up my rifle without arms snagging or catching my clothing or jacket. That's been my and a couple friend's findings. Otherwise great gear.

  • @donspiteri6814
    @donspiteri6814 7 หลายเดือนก่อน

    Great video mate

  • @SorenDrost
    @SorenDrost ปีที่แล้ว +2

    Awesome accessories from PRS ! - Gavyn does a superb job for sure 🙂👍

  • @carelheydenrych4376
    @carelheydenrych4376 11 หลายเดือนก่อน

    Decent review - new sub!

  • @redpillnibbler4423
    @redpillnibbler4423 ปีที่แล้ว

    You’re looking very dapper this evening 👍

    • @fieldsportcymru4636
      @fieldsportcymru4636  ปีที่แล้ว

      Lol well every now and then the usual scruffy me goes for a few hours . I was off to look at a new permission on a rather posh bit of land .

  • @stephendavison8246
    @stephendavison8246 ปีที่แล้ว

    Awesome gun, got the same one me self. Question. Where did you get the alpha wolf bottle sticker from?

    • @fieldsportcymru4636
      @fieldsportcymru4636  ปีที่แล้ว

      Off a guy on e bay ,he had red wolf and Delta Wolf ones on line the same style and did me the Alpha wolf

  • @80scasuals
    @80scasuals 3 หลายเดือนก่อน

    Hi mate , Just ordered the Ghost Carbine , Where did you get the arca extended rail from as I’m afraid a normal one would protrude the bottle ? Many thanks

  • @gallantone1535
    @gallantone1535 ปีที่แล้ว

    It's a shame they don't make the brk so that you can load from left to right with out having to spend more money

  • @ianwoods1384
    @ianwoods1384 ปีที่แล้ว

    Hi Paul,
    Thank you for a great film and footage. Your kit is beautiful, without question. With great respect, personally, I prefer the traditional walnut stock look of an air rifle, just pipping the tactical stock to the post, marginally.
    May I ask, please, as someone whose a less experienced airgunner than you, what is the attraction of the single shot loader? If an air rifle comes with a ten or twelve shot magazine and cocking lever, surely this is more convenient than after every shot, fumbling around on your pockets for another pellet?
    I'm just thinking now. Would it be because the pellet skirt is less likely to be damaged by the pellet push rod as it goes into the barrel?
    Nevertheless, the single shot unit is a beautifully engineered piece of kit and I'd expect it would be a joy to use. I like it a lot, though if I was hunting it would be the magazine every time and a cocking lever.
    Thank you Paul.
    Take care, Ian.

    • @fieldsportcymru4636
      @fieldsportcymru4636  ปีที่แล้ว +1

      You are quite correct about the single shot loader. It far easier to load a pellet singularly into the breech without any damage to the head or skirt with a single shot loader than a magazine. Whilst the Daystate mags are superb they and all mags ive ever used ,do not always align every pellet perfectly which leads to head or skirt deformation and so slightly worse accuracy.

    • @ianwoods1384
      @ianwoods1384 ปีที่แล้ว

      @fieldsport cymru Thank you, Paul.
      All interesting stuff.

  • @alanhickin2025
    @alanhickin2025 ปีที่แล้ว

    Hi, have you had any problems with regard to the "single shot loader" once it is inserted into the loading port , but before the cocking leaver is closed , pellets can fall out ending up in my case
    In the chamber behind the loading bay causing malfunction, possibly due to there being no
    "O" ring in the loader.

    • @fieldsportcymru4636
      @fieldsportcymru4636  ปีที่แล้ว

      Not so far but the pellets im using are a snug fit in the loader

    • @alanhickin2025
      @alanhickin2025 ปีที่แล้ว

      Mine would fall straight through, I'll check it's not been supplied with a .22 fitting.

  • @cronus2010
    @cronus2010 ปีที่แล้ว

    Where did you get the Alpha Wolf bottle sticker from?

    • @fieldsportcymru4636
      @fieldsportcymru4636  ปีที่แล้ว

      A guy on E bay ,he does Delta , Red wolf ones i just asked for an Alpha Wolf one and he did it same price as Red wolf

    • @cronus2010
      @cronus2010 ปีที่แล้ว

      @@fieldsportcymru4636 thank you I’ve been looking everywhere for the sticker, by the way I really enjoy your channel. 👍

  • @novrut
    @novrut ปีที่แล้ว

    Great info as usual. Can you tell me what moderator you are using on your Alpha Wolf? Would like to have one for my Delta Wolf. Thanks.

    • @fieldsportcymru4636
      @fieldsportcymru4636  ปีที่แล้ว

      Its just a cheap webley one ive wrapped in carbon tape

  • @stuartburgon5583
    @stuartburgon5583 ปีที่แล้ว

    Grate info I’ve just bought a cheek raiser for my ghost and I was thinking which way round it went you’ve solved the problem 👍🏻

    • @fieldsportcymru4636
      @fieldsportcymru4636  ปีที่แล้ว +1

      You can fit it either way .

    • @stuartburgon5583
      @stuartburgon5583 ปีที่แล้ว

      @@fieldsportcymru4636 what’s the mod on your ghost if you don’t mind me asking.

  • @SoutheastShooter
    @SoutheastShooter ปีที่แล้ว +1

    I have to agree PRS parts are fantastic quality, the price reflects the investment in CNC mills, anodising, design, development and raw materials to make the products.
    I originally bought the butt hook/monopod for my Sniper XR as same adapter as the RedWolf, not looked back. Now my RedWolf Midnight fully kitted out along with my Ghost carbine, I’d recommend PRS parts to anyone if budget allows👍👍👍

  • @andyandtracyJ
    @andyandtracyJ ปีที่แล้ว +1

    Great looking bits of kit however would of been very slightly better if the screws were black ,

  • @paulcarruthers1314
    @paulcarruthers1314 ปีที่แล้ว

    Given that BRK push PRS I was disappointed that on fitting the butt to the Ghost that it now doesn’t fit the case. Agree that the quality is excellent

    • @SoutheastShooter
      @SoutheastShooter ปีที่แล้ว +1

      I thought the same, they must have known as the case has a cut out to store the butt pad.

    • @paulcarruthers1314
      @paulcarruthers1314 ปีที่แล้ว

      @@SoutheastShooter yeah, that’s where I’ve put it, no hardship I suppose.
      I’ve emailed them re a case that fits, but zero response