I love grabber toys not just because they look cool but because they are almost entirely completely useless considering the hands alone are so much more efficient.
This would be really cool to make like, cosplay arms out of. Thread some wires through there and extend the tube, and you've got some flexible Doc Ock arms!
Can you make one that go's in the opposite detection? As in , instead of starting the claws on the outside garbing in, have them together oping out, like an oping flower, when the plunger is pushed.
You immediately remind me of that one video of like this woman cleaning her sing with the machine, and it was a goldfish in there, and once the sink was cleared, the goldfish just went to demise💀
Would turning the thumb hole 90° too weak a structure or require an extra construct? Not nocking the design, I think it's cool as hell. I'm just asking for the ergonomics
A group of people who say that everything must consume electricity to work will come to you, and they will say to you: Oh, what is this complexity ( even though it is very simple ) ? It must be eliminated and replaced with something that requires 1,000,000 volts to work !! ( With highly complex and consumable semiconductor electronics that you cannot manufacture yourself, as they require very clean laboratories and maintaining lighting, in addition to being on a microscopic level ).
C est bien l'impression 3d mais sa reste du plastic pour la plupart,y aurais pas moyen d utiliser une pâte a base de poussière de bois(récup)et résine ou colle naturelle ?!
Billionaires rolling around on 450 foot yachts that chew 1000 gallons of fuel an hour, flying a 747 across the country for one person. Thousands of large ships, tanks, airplanes, submarines and mobile launchers deploying thousands of metric tons of explosives daily across Europe in the Middle East… But yeah, we should really prioritize worried about this guy enjoying some toy he made out of 30 g of plastic. Because that’s what’s killing the planet.🙄
@@splatter_proto The billionaire class is absolutely responsible for 99% of what pollutes the air, soil and water. Why should a working class individual feel guilty about creating a tiny piece of plastic that brings them joy, when they are not the one responsible for trashing the planet? When every person on earth could create a tiny piece of plastic like that and there would be plenty of room in the landfills for them, why should this person be admonished? Landfill space is like the least of humanities concerns right now.
@@Kady3DPrinting I see the one you recommended for 219 but I think I would like a better bed to print on so I can print bigger things so I think I’ll get one from same company but one that’s like $320 so I can mess around with different size 3d prints
@@Capybara_Clan1 One thing to consider, larger printers tend to be less dimensionally accurate, because the frame flexes. Also, most files you find online are designed for Ender 3 size print beds. So there is not much advantage to a larger printer, unless you have a specific design or file already in mind. If you watch around for sales, you can get regular Ender 3 for $100-$150. If you take the time to tune it right, no one will be able to tell you are not using $1000 printer. Trust me, I have sold tons of stuff on Fiverr and Etsy off my $100 Ender 3s.
STL at bio link
For when you're bored of tugging on your carrot the traditional way lol
What type of PLA did u use?
🫠🫨
@@TheUnknownDragon430 The kind that would break if he tried to grab literally anything else with it lol
"The design is very Human"
So True
Very Predator.
Very easy to use 😂
Why does this remind me of the toilet thing
I say it looks more like the bobbit worm
I know a de-baller when I see one
No wonder it’s called the predator grabber
"Nice balls, bro." **snip**
@@blueducky1AAAAUUUUUUGGGGHHHH
@@blueducky1cat simulator 3000
Idea....3d printed pare of anguish
WE NEED A BIGGER ONE TO CATCH EDP
I will make another cool one for you
they already caught and released him like a fisherman
I swear to God I was about to comment that joke 😅😂❤
You sus af
We’d probably need a crane
He finally solved the Minecraft TH-camr problem
This would be the best gift for any man between the ages of 5-50
I am 44. Please up the age cap
@@MrTuubster 👍 ok
This is looking like the pear torture device 💀
Why would you torture pears?
He's talking about the pear of anguish
Damn I almost forgot about that terrible torture device.
In the movie, he uses it to remove bullets
Works great, i printed it and Dr. Disrespect came flying through my window.
I NEED A BIGGER ONE
I love grabber toys not just because they look cool but because they are almost entirely completely useless considering the hands alone are so much more efficient.
i need this for a prank for my friend in the sleepover when he sleep.
Prank 'em, John
u already know
That sound when he slided the "thing" into the green thing was so satisfying.
Oh my god, these things can help with picking up all sorts of crap, even literal crap.
Exactly
@@Kady3DPrinting I’ll be honest, I’d use that if I had a 3D printer.
now we can finally get that last Pringle.
Need one of these made of steel
Or carbon fiber
Ahhh yes pear of anguish my favourite torture device
You should wash your print bed
I think so
@@Kady3DPrintingyeah it dont look good
It's fine.... I go several prints between washes to lol
I see many scratches. Maybe he should replace the cool sheet
I washed it
So many satisfying clicks and snaps.
Very interesting... This is why I need a 3d printing guy
introducing the new and improved man catcher
This would be really cool to make like, cosplay arms out of. Thread some wires through there and extend the tube, and you've got some flexible Doc Ock arms!
50 missed calls from how to catch a predator
Some people use those to print prosthetic hands for people. You can grab small objects that are already within reach.
It's funny how I'm currently printing this grabber right now while I comment.
the question is...
*does it grab predators?*
I need this for um research purposes
chopping p3d0s ding dongs off?
3D printing out his own 90’s happy meal toys
Make one that can extend and grab objects from a furthest distance please❤😊
Can you make one that go's in the opposite detection? As in , instead of starting the claws on the outside garbing in, have them together oping out, like an oping flower, when the plunger is pushed.
Ever thought about making useful and cool stuff like guns on this channel?
Lá ele mil vezes a parte do encaixe 💀
A mini garrys mod physics gun.
Edit: Where can I get this file?
so good 👍👍
The comments are too chill for the thie one
my mom: who would even make that?
me who just finished printing an unnecessary amount of them: ...
Chris hansen needs one
I'm pretty sure that's that one medieval torture device
Reminds me of master grade acguy and zgok gunpla assembly 😮
Good job
It reminds me of those wine bottle openers.
Yo bro it's really cool
that carrot looked like it came out of the table
You might need one of these if you hang around the Doc.....
chelicerate taking notes rn
The gingerbread man in the back: EAT ME! *spits on you*
Finally i can get y damn ring out the sink 😂
“I did a thing” ahh moment💀
Bro looked at 80s & 90s Happy Meals Toys & said "aight, bet"
Carrot grab. Nice!
My cousin want that
💀
You immediately remind me of that one video of like this woman cleaning her sing with the machine, and it was a goldfish in there, and once the sink was cleared, the goldfish just went to demise💀
Man an working action figure
Its cool, sorry but i would use metal spring 😅
I never trust plastic spring
This is awesome.
The link is in the description, you can 3D print one if you have a 3D printer.
For when you're bored of tugging on your carrot the traditional way lol
Sooooo cool man
❤
I really think this fits drake
This reminds me of some older movie i think. Was it tremors?
Now just make 4 more, bigger, attach them to mechanical tentacles, so you can have the power of the sun… in the palm of your hands
Gostei do vídeo tu fazer o Godzilla❤😮🎉
Would turning the thumb hole 90° too weak a structure or require an extra construct? Not nocking the design, I think it's cool as hell. I'm just asking for the ergonomics
Fallout stimpack❌
Predator grabber✔️
Cool ! Can you make something from the cartoon One Piece?!
I hope he does. WAIT DID YOU CALL ONE PIECE A CARTOON😡
@@ebbetuuvas6777 😅sorry Anime
ITS AN ANIME YOU BLUBBERNUGGET
Kinda feels like the claw spring should’ve been in a closing position
WE CATCHIN DRAKE WITH THIS ONE
Yea
That's what Jeff Bridges used to rip out Tony's arc reactor.
Can it grab drake 💀
“PRIESTS HATE THIS ONE DEVICE”
Esa herramienta puede tener otros tipos de uso en la vida cotidiana...
Subnautica in a nutshell
Awesome!!!
I would wear a hoodie and hold the grip part underneath the sleeve so it looks like its my hand, I know some people are thinking the same thing
Why don't you make the thumb hole the same orientation as the index and middle finger?😅
I don't know why but i want it soo bad😂
need one but longer
How well do these types of springs work? Do they deform permanently over time? Im trying to implement them in a design im creating.
It depends on the material
Okay now, why don’t you make it LONGER so you can grab things without getting up?
Is noone gonna talk bout that one black piece
I heard the Lego games sounds when he was disconnecting those parts from the printer plate
A group of people who say that everything must consume electricity to work will come to you, and they will say to you: Oh, what is this complexity ( even though it is very simple ) ? It must be eliminated and replaced with something that requires 1,000,000 volts to work !! ( With highly complex and consumable semiconductor electronics that you cannot manufacture yourself, as they require very clean laboratories and maintaining lighting, in addition to being on a microscopic level ).
This just feels like an adult evolution of that demented child from toy story... More so because no part of that tool looks right!
"Predator Grabber" these need to be given to every minor in 2024
I want tha that :0
Need one for my terp pearls
Where to buy 3d files?!? I want one
Nvm I just checked the description LoL
P.s. thanks for sharing for free ❤
Link please. Its amazing
At the description
We need one for dr disrespect
I can finally catch my uncle
Cool asmr
C est bien l'impression 3d mais sa reste du plastic pour la plupart,y aurais pas moyen d utiliser une pâte a base de poussière de bois(récup)et résine ou colle naturelle ?!
Yay more ewaste
Billionaires rolling around on 450 foot yachts that chew 1000 gallons of fuel an hour, flying a 747 across the country for one person.
Thousands of large ships, tanks, airplanes, submarines and mobile launchers deploying thousands of metric tons of explosives daily across Europe in the Middle East…
But yeah, we should really prioritize worried about this guy enjoying some toy he made out of 30 g of plastic. Because that’s what’s killing the planet.🙄
@thegrobe
Billionaires aren't solely responsible for filling landfills
I think I'll make one out of spite.
Sure it's waste but I don't think it's waste
@@splatter_proto The billionaire class is absolutely responsible for 99% of what pollutes the air, soil and water. Why should a working class individual feel guilty about creating a tiny piece of plastic that brings them joy, when they are not the one responsible for trashing the planet?
When every person on earth could create a tiny piece of plastic like that and there would be plenty of room in the landfills for them, why should this person be admonished?
Landfill space is like the least of humanities concerns right now.
question do you know any reliable $300-$500 3d printers that are easy to operate because I am saving up for one but don't know what one to get
Ender 3 v3 se is impressive
@@Kady3DPrinting I see the one you recommended for 219 but I think I would like a better bed to print on so I can print bigger things so I think I’ll get one from same company but one that’s like $320 so I can mess around with different size 3d prints
@@Capybara_Clan1 One thing to consider, larger printers tend to be less dimensionally accurate, because the frame flexes.
Also, most files you find online are designed for Ender 3 size print beds.
So there is not much advantage to a larger printer, unless you have a specific design or file already in mind.
If you watch around for sales, you can get regular Ender 3 for $100-$150.
If you take the time to tune it right, no one will be able to tell you are not using $1000 printer. Trust me, I have sold tons of stuff on Fiverr and Etsy off my $100 Ender 3s.
Yes now I can finally stop this discord predator
It should clamp down more than it doesn’t
Aint catching drake with tgat
That isn't big enought to grab Drake 😒
So its just a grabber, and a predator is using it ?
Why is no-one talking about the retractable carrot?
This to grab predators with?