Unboxing and setup of the Atomstack A5 M50 Pro
ฝัง
- เผยแพร่เมื่อ 10 ธ.ค. 2022
- This is the first of the Atomstack A5 M50 Pro, diode laser, series of videos. Today, we unbox and setup the laser, up to powering up for the first time. Be sure to like and subscribe for the entire instructional series!
A5 M50 Pro: bit.ly/3irkROv
A5 M50 PRO on Amazon: amzn.to/3VQHWco
Atomstack Official: bit.ly/3UUOmpS
Discord: / discord
Facebook: / lasernoob - แนวปฏิบัติและการใช้ชีวิต
To get the cable through and under the rollers and over the cog, I just pushed the cable over the top of the cog and under the roller on each side...super quick!
this video help me out a lot, i ended up getting this laser as well, just coz you didn't mention it, in the usb stick they give you there is a Micro SD card for you to use in the machine too and this also comes with all the software and tools to update it and to enable it to work over wifi too. no data cables is nice.
Well, just outstanding! I could not have accomplished this on my own. Explained everything in detail and step by step went very smoothly. When I ordered my unit I also ordered the rotator roller, which comes with leg extensions to solve raising the laser.
Hope to follow you on you tube with more AtomStack and light burn tutorials. Thank you…
I'm glad you found the video useful, Chuck! Thank you for the kind words and be on the lookout for a full review / test video coming in the next couple of days!
Good to see a in depth atomstack video. Its ashaime its not the S10 or S20 as im about to purchase either one of those in about a week. But still nice to see the video since I can't seem to find many videos for the A10 S10 S20 A20.
Sadly, a 5w was all they were willing to send me to test. I'm still relatively unknown, so I certainly don't blame them. But if they ever send me another laser, I'll definitely do a video series on that as well. Thanks for the kudos my friend!
Hi Ryan, do you agree with the statement of Atomstack that there is no additional eye protection is needed because of the 'Eye-protection flame-retardant filter panoramic glass' on the machine?
I 100% DISAGREE with that statement.
Is it necessary to cut off the belt and put the end caps on it? I've seen some people just leave the excess belt.
I would suggest leaving the excess. Although that is opposite what the instructions say. The excess is needed to tighten the belts in the future. Great question!
Good one when is the next video is up?
I've done 3 atomstack videos after that one. The latest was uploaded today. Check out my atomstack playlist: th-cam.com/play/PLIRHJbU-BTpqIs1kMLLqYiADq2QAyBUXf.html
@@LaserNoob Thank you Ryan great content and value, I appreciate it
Bisa potong acrilik bening?
Not possible with a blue diode laser.