You should use F3 to calibrate your thermometer. Your temp of 96.5 is too low. Mine said the same, so on F3 I added 2.1 degrees F to make it add up to 98.6. Now the temp will be a more accurate measure. Thank you for the video, because it helped me figure this out.
This saved me so much trouble! I couldn’t find what “M” stood for! My Son was changing the numbers and I thought it was affecting the sensitivity. So thankful for your video showing it just means the memory & how many temps have been done lol!!
I ordered mine off Ebay - they seem more accurate and reliable than these mouth tongue thermometers where it measures your temperature when you put the sensor under your tongue and have to wait sometimes 2 minutes for a reading which isn't always accurate anyway.
This model is sold under many different brand names, some for very low prices (I got mine on Amazon for $20 USD) and some for as much as $100 USD. They're all made in Shenzhen, China and come with manuals printed in Chinglish. (I wonder how much it would cost these Chinese companies to have a native English speaker proofread their manuals so that they make sense?) The thermometer stores up to 99 temperature readings, but as far as I can determine there is no way to clear the memory, so once you hit position 99 it will hopefully just start overwriting the old memory positions. You can reset the unit to factory settings, but that doesn't clear the memory either. Nonetheless, it seems to do a good job taking temperatures, so as long as mine keeps working, I'm happy. The manual says it has a one year warranty, but you have to ship it to China for warranty replacement, so I'm sure the shipping would be more than it's worth.
Here are comments for a related IR thermometer (it does not have SURFACE setting, no instructions. So this video helped me set up). In my version to change to Fahrenheit (F1) I had to quickly recycle through F2, F3, F4 etc BEFORE it times out -- otherwise the changes are not saved.
@@montcopatriots hello, can you tell me how to switch between Fahrenheit and Celsius? Mine is on Fahrenheit now Thanks in advance for your reply, regards Carola
I just got one very similar to that. You showed me how to switch back-and-forth between centigrade in Fahrenheit. Though I had a Dickens of a time finally getting it to switch. But finally it did. Thanks again. Cheers from “TrumpLandia”. (But hopefully the hue will be blue again come this January)
Wow! Thanks for your infornative review. Especially with what's going on around the world, its so important to maintain health and safety guidelines. I also made a reveiw for this on my channel, which just goes to show how crucial of an issue this has become.
I'm confused here to be honest as I expected the review to include testing the accuracy of the device with a known temperature reference otherwise its just spurious readings
It can measure higher warm items like even lava lots or trees. The main speciality of this device is within few seconds it can highlight the temperature.
I’m having issues turning it on, I tried switching the batteries and pressing the trigger button and it still hasn’t turned on. I used the batteries give and my own and neither work any suggestions?
How do you know how accurate this thing is when you don't compare it to a mercury thermometer? These things are known to have between 1 and 3 % inaccuracy. You aim at at the cups of water and you could easily have put a mercury thermometer in them.
You’re not suppose to point infrared beams at your brain. It affects the pineal gland which is what regulates your entire nervous system. Get your temperature from your hand or wrist only.
If your video software allows you to normalize audio, I recommend using -1.0dB. That's about as loud as audio can get without distortion and your voice would be much easier to hear.
@@CloughReviews It's a pretty common mistake and not one most people would know what to watch out for. Normalizing audio is pretty important to the recording industry but not on the radar for the rest of us. For sure a few minutes of learning the basics of 'audio normalization' could have a big effect on the final product. Another audio tool that can help a lot is 'compression', but that's a bit (a lot) more complicated but worth the effort if your software allows it.
Ha, maybe 'compression' farther down the line then. I've struggled to find a good wireless Mic that was also easy to use as well, normal wireless Mic's were a bit cumbersome to use and set up and the Bluetooth SmartMike+ was horrendous for syncing. I got a Comica BoomX-D that connects to the phone through the USB-C port and just 'works'. So hopefully, the ones where I'm moving around now should be ok, but the normalising will still come in handy, thanks
@@CloughReviews For sure it's not something you want to just start using because it's there, like any powerful tool. I have been using Cakewalk recording software for decades, and poured hundreds of dollars into it, but due to years of mismanagement it was bought by a foreign company, BandLab, and is now being offered for free to people who create an account with them. I've been using it and it still works great. I use it to compose and record my own music at home. Cakewalk by BandLab. I mention it because you can open a video in Cakewalk for Bandlab and separate the video from the audio so you can edit the audio. It does not edit video. You can use various tools to edit your audio, as well as use unlimited audio tracks to add additional audio/sound effects. Normalization, compression, EQ, reverb... tools like that can be very effective in making your audio sound more 'professional'. If you want I could download one of your videos (unless I can't) and tweak it a bit and post it for you with a private URL so you could hear the difference.
@@javadude54 awww, thanks for the offer. If you want to, and its not too much trouble, I'd appreciate that, it would be good to hear a real world example
I would like instructions from start to finish...battery install to what all the buttons do and so on. Please respond ASAP as I need to start using this for work immediately. Anybody know how to change for C to F?
Thermometers have their detect range, if the temp is higher than it's max range, it will display HI, if the temp is lower than the min range, it will display Lo
@@MALADES You could go to "Temp offset setting", which is usually F2 or F3, adjust it to 0℃ (the default value), and then pls check your mode and make sure the body mode. After that, you can detect the correct temp...
Hey Clough - really good video review. Thanks for that! Could you tell me what is the brand and model number of the one you demo'd. Not the newer version but the one you demo'd. I'd like to know. Thanks! P.S. I'm Jan
HI Jan, the one in the video was bought about 18 months ago, its a really generic one and although it has a model no on it, there is no manufacturer on it or the box. I tried to find it for the link on the video but to no avail. They are all much of a muchness really though, just watch how much you pay is my advise.....
@@CloughReviews Thank for the advice and feedback. I've been looking at models very similar to yours and they seem to be DT-8806U or 8806H or RS-8806S, etc. Different "manufacturers "or regional distributors (not sure which) are re-branding them. But this body style and functionality do seem very similar except for the slightly older ones like yours seem a little more robust. Whereas the newer ones currently available seemed to be dumbbed down and cheapened up a little in terms of size, look, marking etc. It would be useful to know your model number even if I didn't know the manufacturer. Thanks again!
Yes , they only change display color when set to body measurement and only if the temperature hits the threshold for a fever or the temp threshold set that you enter , if you don't have a high temperature then the display won't change color.
"Lo" means "Low". This occurs because the thermometer is on BODY mode and the resulting temperature reading was below the set ranges for a body temperature (Note he says the GREEN reading begins at 86F, so we can assume that on BODY mode any reading less than 86F will read as "Lo")
I have this product but cannot seem to get the sound to work on it??? I have been into the function 4 mode and see the speaker on on the main screen. Any help for this??
Do you have the instruction booklet that goes to the thermometer because it tells you how to do everything step by step. If you don't have your booklet then let me know then I'll get back to you on it cause i just received one of those from my health insurance provider.
Hi, It's not a branded model (just a model number of PC868). There isn't even a manufacturer name on the instruction, never mind the box. I remember that when I bought it, there were lots of generic brands were the only difference between them and mine was just the colour of the body or the buttons etc
It's just a generic brand, no name. I put the link in the blurb but not sure if its still available from the seller. Just do a search and look for one with the same controls
Is there a way I can hide the temperature and only get the color warning? Is there a way to have certain temps go to a custom color? Example: 100 + gets orange or red?
This is complicated this device I'm looking this for ages hesitant to buy from Amazon see one for 10 dollar how much did it temperature be for danger and how much temperature is normal. I think the strips look better. Easy to use this takes batteries what if it doesn't work is red light don't work that did work to aim the red light so how you know it's right temperature nexus it works with infra red light if the infra red don't work it won't check it correctly. Is it tramp nearly 100f that's high. I need this for work but so many people selling them and I'm doomed if I get it and it doesn't work
I think that they are all pretty accurate as the technology is very simple. What you may need to do though is calibrate it before use. Eg, test with an oral thermometer to make sure you are at normal body temp and then use the non contact temp as a base for normal. These really are good, so quick
Hi I ordered one a month ago but didnt need to use it until yesterday. But once I put batteries in and pressed the main button. It doesnt even switch on. Can you help at all? Thanks
Hi, i actually had a similar issue, but the problem might be in how you insert the batteries. Check out this video that walks through setting up your thermometer:th-cam.com/video/Jxb14swfF8s/w-d-xo.html
I am from Dhaka bangladesh I have bought this model from online. bt it came with Celsius but i can not change to farenheight.. can u show me how to do that??? Thank you
Does it always read low, i.e. normal temp should be around 98.5ish, but when I try it it's usually around 95-96 degrees. I know with some thermometers you need to add a degree or two for the actual temp, is that the case with this?
Kevin Isidro, these they are showing only read surface temperature. I use these exact one's in painting. I don't understand why they are using them on humans. Not accurate at all.
Hi John, not sure what you mean. They are meant for the taking of surface temp. Look what they are using at airports etc for checking temp. You won't get an internal temp but you don't need one?
Ah, Singapore, my favorite stop over country. Can't wait to get back there when all this Covid nonsense is over (my wife loves the Night Safari, have to do it every time we visit😒). The only thing on the box is PC868, no Brand, manufacturer or anything. Sorry
Hi Clough; just wondering if you could help us please? We recently changed the batteries and since then the mean machine is on a locked mode and just displays 'HI' whenever we try and take someone's temp. Have you any idea how to take the lock off? Any help is appreciated! Thank you, Sian!
Can't see anything in the instructions for locking/unlocking. The only thing mentioned about the display is if there is an obstruction in the sensor window. If that doesn't work, try replacing the batteries again, they may be dud
It's not that I use it all the time, but it is there when I need it. So easy to use, and it either shuts the kids up because I can show them they are not ill, or it raises an issue and we can medicate accordingly. Not had Covid in the household but if it is a fever we are looking for then this helps
Don't buy it. I have a similar one, and all of us are having errors on the displays. It works fine for just one day, and then is garbage. I'm so pissed off
So, sorry to say this but this isn't a very helpful review. There is no "benchmark" to use to ensure accuracy. You are getting reading and you show how easy it is to use but there is nothing to show accuracy.
Thanks so much for this. The instructions in the box are in minute print and they don't even tell you the basics. I now know what to do.
You should use F3 to calibrate your thermometer. Your temp of 96.5 is too low. Mine said the same, so on F3 I added 2.1 degrees F to make it add up to 98.6. Now the temp will be a more accurate measure. Thank you for the video, because it helped me figure this out.
How did you do this
This saved me so much trouble! I couldn’t find what “M” stood for! My
Son was changing the numbers and I thought it was affecting the sensitivity. So thankful for your video showing it just means the memory & how many temps have been done lol!!
I ordered mine off Ebay - they seem more accurate and reliable than these mouth tongue thermometers where it measures your temperature when you put the sensor under your tongue and have to wait sometimes 2 minutes for a reading which isn't always accurate anyway.
Bonjour, vous voulez passer en re*vue nos produits?（Thermomètre Frontal avec Lecture de Précision）
This model is sold under many different brand names, some for very low prices (I got mine on Amazon for $20 USD) and some for as much as $100 USD. They're all made in Shenzhen, China and come with manuals printed in Chinglish. (I wonder how much it would cost these Chinese companies to have a native English speaker proofread their manuals so that they make sense?) The thermometer stores up to 99 temperature readings, but as far as I can determine there is no way to clear the memory, so once you hit position 99 it will hopefully just start overwriting the old memory positions. You can reset the unit to factory settings, but that doesn't clear the memory either. Nonetheless, it seems to do a good job taking temperatures, so as long as mine keeps working, I'm happy. The manual says it has a one year warranty, but you have to ship it to China for warranty replacement, so I'm sure the shipping would be more than it's worth.
Here are comments for a related IR thermometer (it does not have SURFACE setting, no instructions. So this video helped me set up). In my version to change to Fahrenheit (F1) I had to quickly recycle through F2, F3, F4 etc BEFORE it times out -- otherwise the changes are not saved.
Walmart
Thank you for clearing my doubts now it's change in Fahrenheit DN-997
Hello would you like to test our Infrared Thermometer
Greetings from Los Angeles! Thank you for the thorough instructions. The manual that came with the thermometer is nearly useless.
Thanks for that Sandi 😁
@@CloughReviews You're welcome
Thanks! I threw away my instructions after switching between C and F a few times and then Months later forgot how to do it!
Ty for the vid. Just got mine in the mail today, hardly any instructions.
Thanks for that. They are a useful tool for all sorts of things as well.. 👍
@@CloughReviews How do you change from Celsius to Fahrenheit? Mine has "set", "mode" & Memo". On mine, there is no sliding thing above the buttons.
@@CloughReviews Never mind I figured it out.
@@montcopatriots hello, can you tell me how to switch between Fahrenheit and Celsius? Mine is on Fahrenheit now Thanks in advance for your reply, regards Carola
Thank you, it was a great walk through video on how to use this device. I just got one delivered today.
It's not until you need it that you appreciate how easy it is to use 👍
i want to talk with u, i have thermometer,but i cannot usr from today,please help me
Help me it only marks error when pressing because
I just got one very similar to that. You showed me how to switch back-and-forth between centigrade in Fahrenheit. Though I had a Dickens of a time finally getting it to switch. But finally it did. Thanks again. Cheers from “TrumpLandia”. (But hopefully the hue will be blue again come this January)
C is for Celsius not centigrade.
I also took forever. Finally took a temp after I set it and then it stuck.
Got mine today, very enexpencive, glad i got it, everyone should have on, gotta go to a doctor office to calibrate it but its all good.
The doctor will fix it for you, because mine has been off since I bought it
After showing lo in the screen its not reading the body temp, what todo. Works on surface is good
Just purchased one and had to learn how to set it for Fahrenheit temp. Good video. British accent was a bonus. 😀 Thank you!
😂😂😂, Always a pleasure, never a chore 👍
C stands for Celsius not centigrade
I have this infrared thermometer and I love it.
Thanks for sharing. I ordered 1 via eBay and hope it’s works well.
Thank you so much. you are an amazing person. Your quick operation guidance saved us a lot.
Thankyou thankyou so much.
God bless you.
Thank you. My thermometer didn’t come with instructions. I accidentally put it to C and couldn’t figure out how to get it back to F.
Hello would you like to test our Infrared Thermometer
Wow! Thanks for your infornative review. Especially with what's going on around the world, its so important to maintain health and safety guidelines. I also made a reveiw for this on my channel, which just goes to show how crucial of an issue this has become.
Watched yours earlier, very good video 😁, nice voice and accent to listen to as well 👍
Finally!!! I've been trying to switch this device to Fahrenheit and the manual is vague. Thank you!!
Always a pleasure 😁👍
Thank you, thank you, thank you for this video!!!!! Much appreciated.
I get like 10,000 different reads on one person so idk the accurate temp
I do too! This must have a malfunction.
Thank you....so much quicker than trying to read the instruction book!
I'm confused here to be honest as I expected the review to include testing the accuracy of the device with a known temperature reference otherwise its just spurious readings
Yep, I get that. Should have compared it to the normal Mercury one for calibration purposes
It can measure higher warm items like even lava lots or trees. The main speciality of this device is within few seconds it can highlight the temperature.
I’m having issues turning it on, I tried switching the batteries and pressing the trigger button and it still hasn’t turned on. I used the batteries give and my own and neither work any suggestions?
How to fix Err problem?
My thermometer keeps saying hi why would that be? Before it was constantly red saying "Hi"when cold or hot. Now it's green saying it's hi.
How do you know how accurate this thing is when you don't compare it to a mercury thermometer? These things are known to have between 1 and 3 % inaccuracy. You aim at at the cups of water and you could easily have put a mercury thermometer in them.
Good point, worth doing
Really? Isn’t this a review? Shouldn’t an accuracy check be the most important aspect to review? Stunning
You’re not suppose to point infrared beams at your brain. It affects the pineal gland which is what regulates your entire nervous system. Get your temperature from your hand or wrist only.
If your video software allows you to normalize audio, I recommend using -1.0dB. That's about as loud as audio can get without distortion and your voice would be much easier to hear.
Thanks for that, it's Powerdirector so it should. I'll look into it 👍
@@CloughReviews It's a pretty common mistake and not one most people would know what to watch out for. Normalizing audio is pretty important to the recording industry but not on the radar for the rest of us. For sure a few minutes of learning the basics of 'audio normalization' could have a big effect on the final product. Another audio tool that can help a lot is 'compression', but that's a bit (a lot) more complicated but worth the effort if your software allows it.
Ha, maybe 'compression' farther down the line then. I've struggled to find a good wireless Mic that was also easy to use as well, normal wireless Mic's were a bit cumbersome to use and set up and the Bluetooth SmartMike+ was horrendous for syncing. I got a Comica BoomX-D that connects to the phone through the USB-C port and just 'works'. So hopefully, the ones where I'm moving around now should be ok, but the normalising will still come in handy, thanks
@@CloughReviews For sure it's not something you want to just start using because it's there, like any powerful tool.
I have been using Cakewalk recording software for decades, and poured hundreds of dollars into it, but due to years of mismanagement it was bought by a foreign company, BandLab, and is now being offered for free to people who create an account with them. I've been using it and it still works great. I use it to compose and record my own music at home. Cakewalk by BandLab.
I mention it because you can open a video in Cakewalk for Bandlab and separate the video from the audio so you can edit the audio. It does not edit video. You can use various tools to edit your audio, as well as use unlimited audio tracks to add additional audio/sound effects. Normalization, compression, EQ, reverb... tools like that can be very effective in making your audio sound more 'professional'.
If you want I could download one of your videos (unless I can't) and tweak it a bit and post it for you with a private URL so you could hear the difference.
@@javadude54 awww, thanks for the offer. If you want to, and its not too much trouble, I'd appreciate that, it would be good to hear a real world example
I would like instructions from start to finish...battery install to what all the buttons do and so on. Please respond ASAP as I need to start using this for work immediately. Anybody know how to change for C to F?
You've mentioned something about laser am really interested in that part. What's the purpose of that laser?
Just to show where you are measuring if it on a surface I presume
So the laser function doesn’t work properly, how can you trust any other function to work properly? Seems like junk
How do you get it unlocked? Somehow mine locked and won't take any temps.
Only two modes now, and no laser pointer anymore.
You explain the best thank you for a great video 👍
Hello would you like to test our Infrared Thermometer
It always shows HI. don't know why? Can you solve this problem? Is it some settings issue?
Thermometers have their detect range, if the temp is higher than it's max range, it will display HI, if the temp is lower than the min range, it will display Lo
How do you fix Hi ????
@@MALADES You could go to "Temp offset setting", which is usually F2 or F3, adjust it to 0℃ (the default value), and then pls check your mode and make sure the body mode. After that, you can detect the correct temp...
How do I open it up to put batteries in it
My thermometer reads LO all the time when i check body temperature. Why?
my does too, have you figure it out yet or are they defective? thanks
Same problem for me also
My too the same
Has anyone been able to resolve this issue?
My also
Can you show me how to put the batteries in it’s the most confusing part
My body temperature option is locked how do I unlock it?
It's the purple thing on the bottom push it to open
Thank you 👍🏼
My thermometer shows icon lock 🔐 on digital screen.Model is UX-A-01.Every fonction is working,except temperature reading.Any ideas? Thanks.
Mine too and I can't get it unlocked at all!
thank you so much
how to put the batteries right way thermometer make work
to turn on
Is there a laser that comes out that could harm your pineal gland
No, no laser. There is mention of one in the instructions but it doesn't operate
Hey Clough - really good video review. Thanks for that! Could you tell me what is the brand and model number of the one you demo'd. Not the newer version but the one you demo'd. I'd like to know. Thanks! P.S. I'm Jan
HI Jan, the one in the video was bought about 18 months ago, its a really generic one and although it has a model no on it, there is no manufacturer on it or the box. I tried to find it for the link on the video but to no avail. They are all much of a muchness really though, just watch how much you pay is my advise.....
@@CloughReviews Thank for the advice and feedback. I've been looking at models very similar to yours and they seem to be DT-8806U or 8806H or RS-8806S, etc. Different "manufacturers "or regional distributors (not sure which) are re-branding them. But this body style and functionality do seem very similar except for the slightly older ones like yours seem a little more robust. Whereas the newer ones currently available seemed to be dumbbed down and cheapened up a little in terms of size, look, marking etc. It would be useful to know your model number even if I didn't know the manufacturer. Thanks again!
How do you change from Celsius to Farenheit? I try the mode button & it was not working
Did you ever figure it out? Can't figure out mine that I just got. Thanks.
Never mind. I figured it out.
montcopatriots I can’t change for C to F. I need help? Please?
@@chandrathomas5266 Same here, it's pretty annoying.
How did you do it?
Less than 6 months and it doesn’t work. Batteries weren’t stored in it. Fresh batteries make no difference. Nothing has quality control anymore.
Just received mine today but it does not work, there is a padlock displayed on the screen and it will not take any measurements, any ideas.
No lock mode on this one unfortunately
The box says it's supposed to change colors.Green normal red over normal n yellow below normal.
It does
Yes , they only change display color when set to body measurement and only if the temperature hits the threshold for a fever or the temp threshold set that you enter , if you don't have a high temperature then the display won't change color.
It shows 94.5 temprature of my body but mercury shows 97.3 the big major error
One is your external skin temp, one is your internal body temp, completely different temperatures. You need to calibrate.........
excusme sir, can u explain again what Lo condition meaning?
pardon me for bad grammar.
"Lo" means "Low". This occurs because the thermometer is on BODY mode and the resulting temperature reading was below the set ranges for a body temperature (Note he says the GREEN reading begins at 86F, so we can assume that on BODY mode any reading less than 86F will read as "Lo")
Help it only marks error when pressing because
Sir I have purchased a lot of pieces of these and not able to sell it, can you help
excellent!
Thank you 😊
You're welcome 😊
How to fix Err problem....
Thanks for the video Clough. Just wondering how to you clean the lens if you get dust in the thermometer?
Good question, I have no idea though. I did try to take mine apart at one point but couldn't get in it
I'm craving pineapple juice now.
I CANNOT GET MINE TO CHANGE TO FARANHEIT!!!! IVE TRIED EVERYTHING
See my comments.... the video does not tell that you have to CYCLE through all the Functions before it times out.
I have this product but cannot seem to get the sound to work on it??? I have been into the function 4 mode and see the speaker on on the main screen. Any help for this??
Do you have the instruction booklet that goes to the thermometer because it tells you how to do everything step by step. If you don't have your booklet then let me know then I'll get back to you on it cause i just received one of those from my health insurance provider.
HI, what's the brand name of your thermometer? There are so many knockoffs.
Hi, It's not a branded model (just a model number of PC868). There isn't even a manufacturer name on the instruction, never mind the box. I remember that when I bought it, there were lots of generic brands were the only difference between them and mine was just the colour of the body or the buttons etc
It's a UTL BRAND
Did you mention the brand name?
It's just a generic brand, no name. I put the link in the blurb but not sure if its still available from the seller. Just do a search and look for one with the same controls
Have you compared this with yuwell yt-1??
Fluke make the best
why does mine not work?! I swear i have tried three different batteries, ive waited a couple of minutes AND IT DOESNT WORK!!!
You have yo put 1 battery is positive and 1 negative
I got mine at digiometer.com I think its pretty great honestly and pricing is good too but color is only blue
Get a grip S 😂😂😂👍
How do you turn it on
Mine doesnt work.. its says error😬
Is there a way I can hide the temperature and only get the color warning? Is there a way to have certain temps go to a custom color? Example: 100 + gets orange or red?
I'm pretty sure it will always show the temp as well
But can I use it on my grill how high does the temp.go
up to 212F on surfaces
How much was it? Was going to buy one off Aliexpress but filled with knockoffs.
Around $25/£20, but the prices seem to have gone through the roof now
This is complicated this device I'm looking this for ages hesitant to buy from Amazon see one for 10 dollar how much did it temperature be for danger and how much temperature is normal. I think the strips look better. Easy to use this takes batteries what if it doesn't work is red light don't work that did work to aim the red light so how you know it's right temperature nexus it works with infra red light if the infra red don't work it won't check it correctly. Is it tramp nearly 100f that's high. I need this for work but so many people selling them and I'm doomed if I get it and it doesn't work
I think that they are all pretty accurate as the technology is very simple. What you may need to do though is calibrate it before use. Eg, test with an oral thermometer to make sure you are at normal body temp and then use the non contact temp as a base for normal. These really are good, so quick
Audio is too low.
Hi I ordered one a month ago but didnt need to use it until yesterday. But once I put batteries in and pressed the main button. It doesnt even switch on. Can you help at all? Thanks
Hi, i actually had a similar issue, but the problem might be in how you insert the batteries. Check out this video that walks through setting up your thermometer:th-cam.com/video/Jxb14swfF8s/w-d-xo.html
Check and make sure the batteries are installed correctly. I had that problem also. Hope that helps.
I am from Dhaka bangladesh I have bought this model from online. bt it came with Celsius but i can not change to farenheight.. can u show me how to do that??? Thank you
It's in the video
Why haven't you ever gotten the laser to to work
No Idea, never taken it to pieces because it's glued not screwed I think
nice
Sir it is always showing 'LO' when I check body temperature. No body temperature is showing. What to do?
Point to a lamp, It should show Red. Otherwise do a factory reset. Go to F5, press +++ and then minus three times. See if that helps.
Mera bhi sem.problem sir jii
Does it always read low, i.e. normal temp should be around 98.5ish, but when I try it it's usually around 95-96 degrees. I know with some thermometers you need to add a degree or two for the actual temp, is that the case with this?
Hi Shawn, yes, its measuring the surface temp which will be less than the internal temp
My my infarred thermometer fell down so when I put it on again is not displaying numbers anymore
What can I do
Not buy another one
My reader keeps giving different readings
Have you compared temperatures with a thermometer that you place under a tongue?
Kevin Isidro, these they are showing only read surface temperature. I use these exact one's in painting. I don't understand why they are using them on humans. Not accurate at all.
Hi John, not sure what you mean. They are meant for the taking of surface temp. Look what they are using at airports etc for checking temp. You won't get an internal temp but you don't need one?
@@CloughReviews getting an internal temperature reading with a regular under the tongue thermometer is more accurate...
How useful can it be when you get a reading of 92.5? How would you know if you have a fever? Reading 98.6? Lol
Can it measure the air temperature or just forhead?
Body, surface and animal. No ambiant measurements unfortunately
@@CloughReviews Can you give me the name of a device that can measure the air temperature?
Greetings from singapore, so which thermometer is good? I mean which model?
Ah, Singapore, my favorite stop over country. Can't wait to get back there when all this Covid nonsense is over (my wife loves the Night Safari, have to do it every time we visit😒). The only thing on the box is PC868, no Brand, manufacturer or anything. Sorry
Hi how are you ? the infared thermometer made in USA or made in China ? thank you
China I think
Hi Clough; just wondering if you could help us please? We recently changed the batteries and since then the mean machine is on a locked mode and just displays 'HI' whenever we try and take someone's temp. Have you any idea how to take the lock off? Any help is appreciated! Thank you, Sian!
Can't see anything in the instructions for locking/unlocking. The only thing mentioned about the display is if there is an obstruction in the sensor window. If that doesn't work, try replacing the batteries again, they may be dud
Wondering if you have to do a factory reset after a battery change. F5 (+++ then ---)
Cheers
اللهم ارفع عنا البلاء
What the brand of ? Is it Gauge brand ?
Just generic model, no brand
How to repeire switch problem
How do you change from Fahrenheit to celcius?
from the button
below MODE
Hi Carola, You use the mode button (I show it in full in the video)
Need one
Ha, so easy to use
Hello, would you like to review our products? (front thermometer with precision reading)
How many records does it save in the memory?
99 Jessica
@@CloughReviews How can I erase its memory?
How much is one of those in the market ?
A lot more now! I paid around £30 I think but anywhere from £80 upwards now
Can switch to Celsius mode?
Yes, F Or C
is it working still? Did you have any troubles with it?
Wanna buy a couple.
In a scale from 1 to 10, how'd you rate it?
It's not that I use it all the time, but it is there when I need it. So easy to use, and it either shuts the kids up because I can show them they are not ill, or it raises an issue and we can medicate accordingly. Not had Covid in the household but if it is a fever we are looking for then this helps
Yes I have trouble with it
@@nsaifi80 what troubles did you find?
Don't buy it. I have a similar one, and all of us are having errors on the displays. It works fine for just one day, and then is garbage. I'm so pissed off
@@ileanarsf7350 yeah, i ended up buying another brand, it works fine, no malfunction or errors has occured.
So, sorry to say this but this isn't a very helpful review. There is no "benchmark" to use to ensure accuracy. You are getting reading and you show how easy it is to use but there is nothing to show accuracy.
No, I get that, I hope that I've learnt and improved on my later videos 👍🏻
Still a great product though, but I should have gone through calibration, etc