Clean job. You actually covered the door panel. Not too many guys do that. My had his tint by a really sloppy guy. His door panel was a mess with soap stains.
I had a guy that did my Mercedes, who put the film all the way to the edge of the glass and then diamond Feild the edge. It looked like factory died glass and lasted 15 years beautiful.
He showed you on the easiest car door…For rookies this would be easier, Cause this car has no window frame or pillar, so it’s a lot easier to get the tint on
The film looks like it has fluid on it.... did you spray one side of it to stick to the window? Also is it water or window cleaner in spray bottle right before you put the film on?
Great video! I'm planning on doing my rsx. Just 2 questions, what do you scrub the windows with? And why do you apply heat on the outside after? Thanks!
Oh yeah, one last question. When you unravel the film, is it the inside that goes on the outside of the window, then when you cut it to size, just transfer it to the inside of the window? So it will originally be the outside of the film you unraveled on the inside of the window facing out, correct?
Like I wanna do the same job on my helmet visor . It is a curved edge , and it is plastic/some sort of a plastic . Is it advisable to:- 1. Tint my visor (legal or not) because I can’t find an extra which is tinted? 2. Use heat to apply the film?
They make a tint spray that the auto stores will carry and it’s intended to give a smoke/tinted appearance to the plastic housing for your headlights and such. Might be worth looking into?
Omg!! i need u to do my window tint, on my new car.. not many shops, cover up the door panel/interior.. i always thought why so many shops dont do this at all.. the shop i went to before did a good job, but i looked em up & now they put Stickers on the door panel to remind ppl "Not to roll down the window in 3-5days" & ppl Reviews complained bcuz Adhesive messes up the door panel... anyhow, great video bro ;)
If you seriously gotta ask if Walmart window tint is any good please for the love of god don’t waste your time and money trying to tint just pay a pro to get it done
I’m sure this will blow up, at least 2-5k like if not more. Why? It’s satisfying, it’s well edited, the narrator has a smooth calming voice, it’s a common concept that we all can grasp, and it’s a dope car. Many factors, will the algo pull through? Who knows. 10 comments, 300 like @ the time of this comment
My guy said let’s add a little heat… proceeds to grab the torch 🗽🔥
👍🏻👍🏻🙏🏼
Tis the way.....
The Tint way.
It’s a steamer
@@ib1424 um... Watch the video again. Lol he's talking about the actual flaming torch he used near the end...
😂😂😂
Clean job. You actually covered the door panel. Not too many guys do that. My had his tint by a really sloppy guy. His door panel was a mess with soap stains.
they come off with windex pro tip
@@JohnDoe-yi2smwindex also dehydrates the shit out of leather
Just apply light armor all for leather
@@WEEWEE_GUYthat's nasty shiny crude that don't want on my $120k vehicle
@@WEEWEE_GUYthe silicone in that garbage will ruin the leather as well
I had a guy that did my Mercedes, who put the film all the way to the edge of the glass and then diamond Feild the edge. It looked like factory died glass and lasted 15 years beautiful.
I just discovered your channel. Very interesting. I'm curious why you use a blow torch instead of a heat gun. Thanks
speeds up the drying process!
@@CadenAugustOfficial 😊😊o😊😊😊😊o
@@CadenAugustOfficial o😊😊
🤡 🤡🤡🤡🤡
Bro has such a calming voice 😴
Girl with blue hair 🤬🤬🤬🤬🤬
@@noname-zi9xm problem inside yourself needs loving resolution ✌️😘
Agreed
@@noname-zi9xmgo okay your little video games nerd
I love your voice, and your tinting style!
Panties getting a bit moist, ain’t it?
Stop being thirsty Ashley geez
😂
@@leetnessgaming9751right
i love you
He showed you on the easiest car door…For rookies this would be easier, Cause this car has no window frame or pillar, so it’s a lot easier to get the tint on
Bro is straightforward but also chill at the same time
With the challenger would the window be going up and down ? Giving you a hard time w the tint ?
Shouldn’t you go about 1/4 inch from the top on frameless windows as they move up and down every time the door opens
Yes.
Great video. Btw what pants are those? 😅
Quick and easy. Thanks!
This guy is pretty neat you can tell by his demeanor attitude and clothing, nice😉 style
My man blew on that torch like it was going to extinguish it lol.
Good videos, have your did one with different kinds and brands tints and what the proper way way to clean tinted windows
What are you using to scrub the window ...?
Nice Vid! What type of blade did you make your cuts with.
Nice made it look easy
Hey Caden is that a scotch brite pad you use to clean the window before applying film ?
What kind of scrub pad are you using
Great video 🎉
Does the window tint film get applied below the window lip? If it's not, what prevents the film from getting caught on the lip?
The flip
Yes you tuck it down in with a plastic card or whatever
Clean work
Beautiful tint very skill
The film looks like it has fluid on it.... did you spray one side of it to stick to the window?
Also is it water or window cleaner in spray bottle right before you put the film on?
What did you use to clean the window
Do you shrink the tint?
What was your time from start to finsh plus you got Tint down to a hobby plus you made
Every Second Count .
Caden when cutting do you put the clear on facing you?
Dope and he fits his car 🤙🤩
Thank you Mr Leonardo DiCaprio for this clean tutorial
Great video! I'm planning on doing my rsx. Just 2 questions, what do you scrub the windows with? And why do you apply heat on the outside after? Thanks!
Oh yeah, one last question. When you unravel the film, is it the inside that goes on the outside of the window, then when you cut it to size, just transfer it to the inside of the window? So it will originally be the outside of the film you unraveled on the inside of the window facing out, correct?
What do you spray and scrub with?
Question: Where do you get window tint from.
Great vid
Super clean fitted 🧢 with a classy bend on the brim 🔥
Dude gets all the boneless windows
Do you have the door panel out, so you can tuck the towel down and install the bottom edge of the tint easier?
It looked like he may have cut the bottom edge too short to avoid this.
No shrink?
Can you cut the tint after it's been installed like on a windshield strip
What to use on your finger to clean the windows
How do you know the level of propane/ flame needed to properly do this w o making the flame too hot or cold.
This is hella satisfying as a job
What was the torch for tho lol
Question the heat that you apply what does that do?
hi caden what is the name of that plastic you clean the windows with swish
Like I wanna do the same job on my helmet visor . It is a curved edge , and it is plastic/some sort of a plastic . Is it advisable to:-
1. Tint my visor (legal or not) because I can’t find an extra which is tinted?
2. Use heat to apply the film?
They make a tint spray that the auto stores will carry and it’s intended to give a smoke/tinted appearance to the plastic housing for your headlights and such. Might be worth looking into?
@@mikenelson9568 yeah I guess it would . Thank you for the suggestion!
You don't do complete method,
What about shrink before apply on glass
Bro got that 38% apr tint
He /she must be embarrased so nobody on the road see them
@@Scotford_MaconochieOr they want privacy, stop self projecting
Best
How would I know how much soap and water I should combine. More soap than water or more water than soap?
What do you do on frameless windows cars? When you open the door the windows go down a little. Does that mess with the film?
How do you cut the top edge
Did you tuck the bottom edge?
what chemical u. using . glass cleaner.
Omg!! i need u to do my window tint, on my new car.. not many shops, cover up the door panel/interior.. i always thought why so many shops dont do this at all.. the shop i went to before did a good job, but i looked em up & now they put Stickers on the door panel to remind ppl "Not to roll down the window in 3-5days" & ppl Reviews complained bcuz Adhesive messes up the door panel... anyhow, great video bro ;)
You tinta both sides or just inside ?
Can you show an example of cars that have a window frame on the top?
What are the liquids used?
U find out ?
@@Sly-cl3zj I just used soapy water when wrapping
Tint life!
Why you never do heat tighten?
What do you use the scrub the glass?
What’s the purpose of cleaning the outside glass after? Is that so you can just see if you made any mistakes ?
I am thinking of buying a window tint kit and try it myself for the first time ever, learn more about how to do this,
Hate this video…
Because you make it look so damn easy! 😅
Does he heat up the outside of window to make tint adhere?
Smooth
Do you not tuck below the window seal????? Doesn’t that come off quicker??? I tuck my tint jobs down a half inch
I like your stuffed animal.
💪🔥
When Seth Everman installs your tint
Where are you located?
Had a question bro where do you get your tint and is walmart tint good tint?
If you seriously gotta ask if Walmart window tint is any good please for the love of god don’t waste your time and money trying to tint just pay a pro to get it done
Excuse my ignorance but what is that white pad you used to clean, I assume
just a non scratch scourer pad, pretty common on window tint supply shopping websites
l have a f type jag the window drops wen u open the door how do u overcome this ?
Is 15% tint legal for the front??
What steamer brand is that? 🔥😎
Can you tell me what that tool is called? The plastic wedge you used after tint was on to get bubbles/soap/windex out?
A spreader
What’s the white sponge thing he used to clean the window
Why didn't you shrink it? Aren't we supposed to shrink every time?
Only if it’s curved or if you want to drop it automatically
What did you do for the little gap? cause when you close the door a solid inch and a half of the window goes up
Half a inch *
no shrinking?
Easy with a frameless window
We’re you located
Not the demon wheels on the scat
@@simbasimba5042 no but i got a scat. you got a scat ? 💀 lame ahh
What kind of steamer is that?
I know right
This dude look like fulcrum and sounds like fulcrum
No shrinking?
Only thing I know i will fuck up is the cutting.. I wish they came pre cut for whatever vehicle
You make it look so easy i just purchased two rolls just to try and man i suck at this
What are you spraying on before you apply the tint. Just soapy water?
and what kind of soap - dish washing detergent?
Bro sounds like the most chill man alive. Also amazing tint job fr
что за приспособление для снятия тонировки? парогенератор?
HEAT FOR WHAT ? WHAT DOES THAT DO ?
What’s the tint limit in America ?
There’s 50 states all have different laws
It's hella easy to put tint on a window without A or B pillars. I struggle my ass off when the pillars are there tho I even gave up 😂
Love the penguin 😂
Sign guy but.. he's the window guy 😂
I’m sure this will blow up, at least 2-5k like if not more. Why?
It’s satisfying, it’s well edited, the narrator has a smooth calming voice, it’s a common concept that we all can grasp, and it’s a dope car. Many factors, will the algo pull through? Who knows. 10 comments, 300 like @ the time of this comment
You were right 😇😎
Are you shrinking the film after you cut it to size?
I wondered the same thing
I assuming he shrunk it on the glass board? Maybe idk
How can you put 5% on TX front windows