Problems Getting Fuel So The Tank Must Go
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- Today I take a look at my Innocenti S Spyder that has been sitting on my shelf of cars for years. It is time to fix the fuel tank and see if it runs with all the changes.
Don't forget to visit my website for more updates: www.thisweekwit...
This Week With Cars - Episode 00368
#ClassicCars #Innocenti #willitrun
I'd like to see how you go about cleaning the tank.
She is spluttering a bit but she is running. A little more tweaking and it will be fine. The fuel tank looks really 'crusty' but as long as the metal is not too thin from rust it will be serviceable. Thanks Steve keep going with this one. 👍👍
My Dremel has saved the day multiple times!
🎉woo-who!!! She’s rough but running.
I’m finding the innocenti videos really useful… I have a mkIII midget that will need all of this work addressed… I’m interested to see what you do with the petrol tank.
That's been a tough one so far. Thanks for sharing the work skills and your efforts.
Ace to see this car coming along. I never knew you could bleed the fuel system like that, really handy tip! I'll need to employ that on my Sprite as the fuel pump was ticking like mad even though I just changed a couple of fuel lines. Definitely enough in the tank before anyone asks! Keep up the great content on this car.
A very good series on how to methodically bring back a long sitting car, unlike some. An awful lot of rust on the undercarriage, seems like a big problem?
I'm still learning from your step by step method Steve.
The way it keeps popping back through that one carb it might have a sticky intake valve.
I have this problem on my Sprite, one carb keeps backfiring. Any handy tips, guides or videos you could share on how to fix a sticky intake valve?
Very rare car well worth restoring. The Innocenti 950 was launched at the November 1960 Turin show, but series production only began in 1961. A total of 4,790 Spiders (950's) were manufactured up until February 1963, when the Innocenti 'S' was introduced with an 1100cc engine, disc brakes and revised rear suspension.
Excellent perseverance. She'll get there. I'm always amazed at how cars seem to _want_ to run.
😄
Sounds like the timing may be way out? Also, looks like the front seal on the differential is leaking.
Looks like a runner, I'll take more vids!
Looks like a nice simple old machine to work on , with a familiar old British A series engine . Those Su carbs are dry as a bone in the dash pots by the looks of it .
Theres a very interesting fast motion video here on YT of a Sri Lankan teenager disassembling, renovating and reassembling an 'A series' engine from a Minor, many of which still running in Sri Lanka, over 50 years from manufacture! Seems not only are all parts still available for the car, but 'A series' engine parts have 100% availabilty too.
Really enjoying this Innocenti series!
Steve, I'm hoping you show us your process for bringing that crusty fuel tank back, including products used.
Excellent video Steve :) hopefully get tank painted up from rust and sending unit replacement to! Plus put new steal line on and also nice engine running too on testing too!
I'm surprised you didn't try the drain plug. Did you think it would tear out of the tank metal?
It's coming along nicely.
How much is a replacement fuel tank, if it is available? That one looks as though it will take a lot of work to raise it merely to "gross", never mind "serviceable", and time is money.
Its contents probably should feed your lawnmower, after careful straining.
£234 from AHSpares for mk2-4 Sprites, £330 for MK1.
Cut the filler tube and add the hose extender?
@@jamilbocus So about a day's work.
These get 'em running and driving videos i like 👍
Yup, more on this car!
It's a lovely little thing!
Don't you just love the Dremel.
Great little car! Keep going.
great stuff thanks
Good job man
Why does the starter "cut out" after a few seconds? Sounds like only the solenoid is engaged and not the bendix (after a few seconds). My Jaguar MK2 does this.
On most British cars the starter is designed to stop when it detects the engine is starting. It does make it harder to start a car when it is cold or not running right.
👍🏻
Was the A series engine standard on these?
Looks a little like a TR6 in the nose.