Thanks man - after watching your video, I got pretty much the same deal on Amazon. I installed mine with relays between the receiver and my hydraulic controls. Way better than being tethered.
I bought the exact one on ebay (china) installed it, worked 3 times and started running intermittently off and on very quickly. Emailed seller, they eventually sent new unit to replace, I haven't installed it yet, but when I do I will use 2 separate relays to do the heavy lifting so unit wont burn out again. Should have bought unit from manufacturer, but after using dump trailer realized I made huge mistake. Salesman said addon for remote from factory was $600 at purchase..huh, that's another reason why I passed, 6 months later called factory up in Quebec spoke to representative and he said $60 for him to send it. A profit is one thing but that's ridiculous. The trailer is an N & N 10,000 dump trailer galvanized pull behind, has been a fantastic trailer..
Update, I just bought this package again but with the heavy relay included with the purchase, I think it was $47ish on ebay. Liked the wiring on this new one compared to wiring in two separate auto relays in combo with lighter remote electronics.
I enjoy watch your video one the remote I just installed a pump on my trailer and was seeking information on wiring ?. My pump is a fenner fluid 1789-A1 12vDC, it was a used pump the plastic tank was broken so the guy bought new assembly that worked for me cause he gave it to me. The pump has one valve I see you are powering both ways I only can see one valve on yours ? is that correct ?. I bought a harbor freight remote that should work the same as the one you demonstrated ? Did you use (Black for Ground) and (Red for positive) I didn't understand (Yellow does it go to solenoid) does (White go to switch) ? having white going to the pump solenoid allows to run pump up and down running the motor ? If I wire so I have power up and gravity down to save on battery life and running motor. To wire for power up and gravity down The wires from the remote are: Red, Black, White & Green. Black is ground, Red is for power, White for the solenoid, Yellow goes to the pump. So what happens when the up button is pushed up button Red being Positive and Black is ground the White is attached to starter solenoid and yellow is to the pump solenoid . Wiring like this will it allow power up and gravity down feed ? my email is : robjens2200@outlook.com Thank you so much.
Mike with Amazon Prime, wenches ship free...I spell so bad" spell check" does not even know how to help me; plus my high school English teacher would write on my papers...i letting my particple's dangle & now at the age of 65 they still do...
![[Gegagedigedagedago] NEW Help Gegagedigedagedago Nugget escape from Nikocado Avocado Challenge](http://i.ytimg.com/vi/hJWnwRC2Fz8/mqdefault.jpg)
Thanks man - after watching your video, I got pretty much the same deal on Amazon. I installed mine with relays between the receiver and my hydraulic controls. Way better than being tethered.
Nice work!
You guidance is always for the experienced diyer , no wasted time on full details ,unless safety required thanks Mike FN .,✌️👍💪🙏🤔😎
G'day Kevin from Australia.
That's a great idea . ✌
That's one heavy duty trailer you got.
I bought the exact one on ebay (china) installed it, worked 3 times and started running intermittently off and on very quickly. Emailed seller, they eventually sent new unit to replace, I haven't installed it yet, but when I do I will use 2 separate relays to do the heavy lifting so unit wont burn out again. Should have bought unit from manufacturer, but after using dump trailer realized I made huge mistake. Salesman said addon for remote from factory was $600 at purchase..huh, that's another reason why I passed, 6 months later called factory up in Quebec spoke to representative and he said $60 for him to send it. A profit is one thing but that's ridiculous. The trailer is an N & N 10,000 dump trailer galvanized pull behind, has been a fantastic trailer..
yea might be a good idea to take the load off. I havent had any problems with mine yet.
Update, I just bought this package again but with the heavy relay included with the purchase, I think it was $47ish on ebay. Liked the wiring on this new one compared to wiring in two separate auto relays in combo with lighter remote electronics.
I enjoy watch your video one the remote I just installed a pump on my trailer and was seeking information on wiring ?. My pump is a fenner fluid 1789-A1 12vDC, it was a used pump the plastic tank was broken so the guy bought new assembly that worked for me cause he gave it to me. The pump has one valve I see you are powering both ways I only can see one valve on yours ? is that correct ?.
I bought a harbor freight remote that should work the same as the one you demonstrated ? Did you use (Black for Ground) and (Red for positive) I didn't understand (Yellow does it go to solenoid) does (White go to switch) ?
having white going to the pump solenoid allows to run pump up and down running the motor ?
If I wire so I have power up and gravity down to save on battery life and running motor. To wire for power up and gravity down The wires from the remote are: Red, Black, White & Green. Black is ground, Red is for power, White for the solenoid, Yellow goes to the pump.
So what happens when the up button is pushed up button Red being Positive and Black is ground the White is attached to starter solenoid and yellow is to the pump solenoid . Wiring like this will it allow power up and gravity down feed ?
my email is : robjens2200@outlook.com Thank you so much.
nice trailer 👍
beautiful lol
over 900 now heading to 1k lets see ha ha....Beautiful
can you say 9000 comments helped
Anyone know the instructions on how to pair these remote to the transmitter box. Thanks
Fantastic video
✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔
Ha, ha, Mike, I'm sure you meant "Winch" but maybe Amazon has improved and has a "Wench" handing out their products :). Nice video though.
Love the video
👍👍
How she running still ? any issues?
still works fine
Sound's good
😀
Great video
Thank you.
😀
Thanks for your video
This will only work on a single acting dump trailer..not dual acting cylinder?
I think both
Nice job! Good info!
thanks for that
Will it drain battery? Since transmitter does not have on and off?
no I didnt have a problem with that.
Does anyone know how to wire it to a power up and down pump i have 2 30a 4 pin relays just trying to figure out if that's the best way
Did you find an answer? I have the same power up and down and couldn't get it to work
Just received and no instructions.
Thanks for the video.
Glad it helped
Did you have any interference driving down road?? Since its wireless.
@@chrisanglin2802 no works great.
Lovely
👍👍👍👍👍👍👍👍👍
Beautiful
👍
Best of the best
😀
Awesome! thanks bro!
Wow Fantastic
👍
Thank u
No problem
Very nice
I am so doing this!
I really love!!!
😀
Wow so nice
Awesome
Wow so cool
👍
Anyone know how to pair those remotes?
Very beautiful
👍
Very good
👍👍
Nice video
✔✔
What is the blue wire
Antenna
Great.
👍
I think a very interesting video
👍
Nice
I've got mine ordered $16, the stealership wanted $200.
yea easy to install. OMG 200 that is soooooo much for that video was almost actual time to install. you go this.
Super
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Mike with Amazon Prime, wenches ship free...I spell so bad" spell check" does not even know how to help me; plus my high school English teacher would write on my papers...i letting my particple's dangle & now at the age of 65 they still do...
😊😊😊😊😊😊
Nicccce
wow
👍👍👍👍👍👍👍
Havvy
I use to think
👍
follow you
👍👍
Haha
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Love the video
👍👍👍
Amazing video
👍
Wow Fantastic
✔✔
Best of the best
✔
Sound's good
🚗
Beautiful
✔✔
Very nice
👍
Awesome
Very beautiful
👍
Havvy
👍
Amazing video
👍👍
Very nice
👍