ฝัง
- เผยแพร่เมื่อ 15 พ.ค. 2024
- Black Friday & Cyber Monday promotion link for 3d printer and accessories : store.creality.com
Thank you for the great feedback and support from the last bltouch video, we continue to work on another printer installation video which is our latest CR-10 V2, Let's find out with Corey!
Like you to know, we start to sell the popular and robust genuine BLTouch auto-leveling sensor from last year since co-operated with the Antclabs.
It now has two versions, one version is compatible with CR-10 series/Ender 3/ Ender 3 Pro/Ender5, and another version is ONLY fit for CR-10 V2.
We get so many views of our first instruction video while there still feedback improvement from you all, so we take all the voice as much as we can and remake the installation tutorial.
We hope you could set up yours more quickly and start to print!
Buy one? www.creality3dofficial.com/pr...
BL Touch firmware download: www.creality3dofficial.com/pr...
Official Creality3d Ender 3 Pro 3D Printer: www.creality3dofficial.com/pr...
#Bltouch #CR10V2 #Creality - วิทยาศาสตร์และเทคโนโลยี
We are reponsible for every customer, so if you have any problems about your Creality 3d printer (especially when you need to use pics or videos to show these problems), pls contact our after service www.creality.com/service-request. We have very professional engineers there to solve your problems. Thanks for your support.
Posting self-assisting videos such as this helps a lot, much obliged!
Why wont you put the proper firmware up for the cr-10 v3? I tried 7 times on the v3 and it ended up scratching my bed. No support at all for v3 so why is it still for sale. This was my first creality printer and you offer no support for it.
I DID contact Creality about my CR-10S Pro (v1 original) asking about Firnware and upgrading my v1 to V2 because I only see V2 firmware on the Creality website and got a very short message back saying they WOULD NOT help me.
@@TheRoadRoamer Probably a bit late asking but did you get it sorted?
Had a similar issue, link I had bounced to the home page and the firmware I needed wasn't in their download section. LUCKILY the website looks like it was coded about 10 years ago, went to the download section for the closest printer then replaced the name in the address bar with the printer model I was after - totally different layout for the site appeared, firmware was there along with a huge list of comments from people complaining that the firmware didn't work etc
Firmware worked fine for me, not sure if they hide pages to bury complaints but I'll give their customer services points for reply to the email, couple days late but their reply was professional enough.
So yeah, anybody reading this that can't find specific firmware, navigate to the download section and replace the model name in the address bar with what you're after... then clear your cookies coz DANG they throw a full box of them at your browser
I think it should come with Bltouch installed from the factory.
Agreed. It is sold as an "Upgraded CR-10"
No one needs auto bed levelling. It's a gimmick. Tramming with a feeler gauge takes 10 seconds.
I have this printer.
okleydokley saying no one needs it is just wrong. Saying I do not need it might be more correct for your situation and even than there is an value issue. As people have pointed out it is an special version that costs more so you want to get more value to. Now let me explain why I claim your statement is wrong. First some people get bent beds. Way easier to compensate with bod all. Sure even then one can do it manually but it is not 10 seconds job. Every time you change the temperature or clean the bed your perfect setting might be gone. Then you need to do it again. Placing G29 line in slicer and every time you print it will be perfect. Fire it up and go. To be honest I like Creality printers and currently I own two. Even from my two the more expensive model have a micro dip in the middle. It is very often occurrence on the Creality printers. In that case ABL is a dream for almost everyone. See how I have said it? Almost everyone. Not a broad statement as yours while we are all different and I do account for that. So to second point. It is way to exclusive to say no one needs it while you can’t determine and predict other people needs an wants. Like I can’t say everyone wants value for their money although it might be close to the truth. You could argue adding a cheaper Chinese abl is not expensive but why? You have paid more it should come with it. Otherwise get the basic version and 7 $ abl solution and make it your self. Still even that is not for everyone. When you can do it one tends to forget that there is way more people who can’t do it. Never the less TLDR version if there is only me who needs it makes your statement a moot point. This is true disregarding to my reasons why I need it or want it and disregarding facts that I do know how to do it and I am not a lazy person.
The Bltouch is made in Korea but the Creality printers are make in China that's why
@@MauiRedMan you make me laugh. Thanks for that. JFYI some models of the Creality printers come with genuine BLTouch and even genuine Caoricorn PTFT tubing.
I can't be the only one who noticed that their print is peeling off the bed after doing the BLTouch install. That's precisely why I would buy one; what's the point of this if your prints still peel from the bed?
And more for the third line up!...👍
Might need more heat on be ? But what would I know maybe she don’t wanna get burnt or something xD
Its auto level but you still have to adjust it???? I don't get it shouldn't it level it all automatically
@@Berserkercustoms44 You need to adjust z offset still, but BLtouch can mesh level and make even warped plates print great. But BLtouch doesnt know the true location of the nozzle without zOffset.
use glue sticks on the bed before you print, a quick layer Will help with peeling ALOT
Are there also some code adjustments necessary for the slicer?
Can you show the install on the CR-10 S5?
hello can the CR-10 V2 BL Touch Auto Bed Leveling Sensor also be used on the CR-10s?
I would love to hear from you
well done, step by step instructions
Hi, I've follow the guide and did a 3d print sample cat gcode. it worked perfectly. It do some bed level test first and print. However when I try another model like the xyz calibration tube. It does not do bed level test and print directly. and the noozle is a bit high. Is there a gcode start for cr 10 v2 that do bed level test first?
This might not be the right spot to post this but, from my experience (August, 2020). Installed the BLTouch on the Creality CR-10 v3. A couple things to note from my experience.
a. Use the firmware for the Titan Direct Drive
b. Printer not normally connected via USB so I disconnected power and moved closer to computer, USB provides sufficient power to power the head unit
c. My printer was not recognized under COM5, I used COM6 and then it was recognized - this permitted me to install new firmware
d. Be sure to reconnect main power supply prior to attempting Bed Leveling (USB cable can be removed for this part)
Look forward to many years of successful prints with this device. Hope this helps others trying to install.
Thanks, creality does not have the CR10v3 firmware on their site.
From your experience you used the V2 firmware with the titan and the BLtouch, is this correct?
Yes I used the v2 firmware. Still trying to get this Z access offset correct.
So this tutorial made my BLTouch experience shit for around 4 months, it did not work well at all and now I've finally got what the problem was: you have to preheat the bed before probing, that way it has the right shape due to expansion and it will work.
Glad this tutorial is helpful to you. Besides, you can check this channel th-cam.com/channels/2-7q3PcGuoDkkoKEr4JT6A.htmlvideos, some common problems can be solved after watching our tutorial videos
would this be the same processs as with a cr-10?
Hello, where can I buy the Kit (BL touch, support and other parts) for my CR10S PRO printer and where to see a video for installation?
how do I decrease the number of probe points? Mine has a lot more than the 3x3 that is shown in the video. Also, how can I increase movement speed while its going through the probing process?
i have a cr10 v2 and bltouch setup
my height z is -002.4 how are what do i set to initialize eeprom
thanks in avance
If your BL touch flashes red its may be bad. i had on bad right out of the box. luckily i had bought a second and i swapped it out and it worked
Is BL touch worth it? How does it compares to manual bed levelling by hand?
Think about to buy one, but i'm afraid it will gonna waste of my money, thanks
Hi, i dont have the com 3 in serial port the only option i have is auto. can you help me
So I had issues following the video but, if you go onto Creality's website and download the Hex file there are also PDF attachments. My issue was it would not let me update through the Creality slicer. However Through CURA there were no issues.
Problem is CR-10 V2 isnt in creality slicer anymore.
Will this work on the cr-10s5?
Hi, I installed my Bltouch but during bed leveling, it does NOT goto the edge of the bed as in this video. It is almost that it "thinks" the bed is smaller. I would love some input on how to correct this...should I reinstall the original firmware? is there a reset button for the firmware. I am a beginner
How do you set up the program was to Cura?
can you make a video on ender 5? auto level, thermal run away fix, upgrades
Look forward seeing them
Sidney
We will feedback to the company to make a video of the ender5 auto-level with Bltouch. For thermal run away, please flash the firmware if you don't know which we already preflash to almost all of our printer now: www.creality3dofficial.com/pages/firmware-download
WHY no CR-10 Instructions? does BL touch not work with CR-10?
Great job Corey, thank you!
thank you for the comment!
I have the worst luck trying to get a BLTouch to work, ha! I'm trying to follow this tutorial, but when I connect my CR10 V2 to my computer, the Creality slicer doesn't show a COM3 available (just AUTO or COM1). I tried it that way and the slicer cannot connect to my printer. I tried going to the Device Manager and changing COM1 to COM3 manually. This allowed the Creality Slicer to see COM3, however, it still could not connect to my 3d printer. I tried this in other slicers as well. None of them can see when my printer is connected. Any ideas of what I should try next?
no he podido hacer funcionar una de mis sondas, tengo dos maquinas cr10 v3 y ambas sondas funcionan bien en una de las maquinas, pero si intento usarla en la segunda maquina e conserva de color rojo y no sale ni regresa la aguja, en el menu de la impresora no hace autotest, no lo gro hacerlo funcionar, aclaro que con el software correspondiente el sensor z manual si funciona, ayuda porfavor
it keep flashing 836.47 on the z
Anyone have a link for the slicing software?
Thank you thank you so much
black amigo thank you for the comment.
@@Creality3D you're most welcome.
Do one installing a bl touch on a CR-X
わかりやすい説明がberry goodでした😄👍️
3Dプリンターのディスプレイメニューが今は中国語と英語の対応だけですが、他の言語にも対応があると親切な感じになって良いと思います。
Thank for your comment and suggestion, we will consider adpoting it.:D
@@Creality3D さん
素晴らしい、期待しています。
実現したら私の3D printer(CR-10v2)のfarmwareをnew farmwareに書き換えると思います。
そして、この動画で説明のオプションキットも取り付けると思います。:D
can you make a video for CR-10 S5 BL-Touch installation part....
We will be included in the plan
The BLTouch kit I bought from Creality doesn't match this video at all. If someone could PLEASE list the pin out/pin names of the five pins for the BL Touch on the CR10v2 daughterboard. Thanks!!!
yeah on the manual photo the connector to BLtouch is wrong wiring colour, a shame. Ok they have a way to not connect properly but be careful.
My printer is a CR-10 v3 (about 1 month old) and I have recently installed the BL Touch kit from Creality. I followed the tutorial and everything went fine, but I am simply unable to get this z-axis offset working correctly. I have manually identified the z axis difference (I've done this exercise multiple times, but the delta ranges between -2.1 mm and -3.0 mm) and stored that setting through the EEPROM, then saved settings (confirming beep, right?). I have done this many times but the printer is always printing way above the bed! To save time from the auto bed leveling, I figured I should simply be able to do the Auto Home (which for some reason brings the nozzle to the middle of the bed at Z 10.00) then just move Z axis to 0, but I am always left with a huge gap (about 2-3 mm). I repeat the cycle over and over to no avail. I had no problems at all with the printer previously and thought this BL would make things easier. Unfortunately, as it stands right now, I cannot even use this printer and have to consider resorting back to the manual z sensor. :(
Any suggestions would be greatly appreciated.
Thanks,
MUST HAVE! IMPORTANT INFO!
Important, I want to help everyone I can with this. Let me save you any trouble that others might be having.
G29 and M420 S1. These are gcode bits you need to know when using a BLTouch. Nobody mentions this in any video or writeup I've seen and without them you will feel hopeless. Now let me explain. Watch Creality's install video and follow it step by step. However, once you get to the part for setting your Z offset, rather than eyeball it like the video, use a piece of paper like you would with manual leveling to ensure you have it right. Now once you have it all done and ready you NEED to add some g code additions to your slicer.
After your slicer does a G28 for homing you need to either add a G29 (this tells it to do bed leveling) or M420 S1 (this tells it to use the saved bed leveling info. Use this so you don't have to wait for the bed leveling with every print). If you do not have one of these codes in your g code the printer WILL NOT use the auto bed leveling and youll be playing hell if you have a warped bed.
Now as for a review bit. This works absolutely amazing! It's a must have, and makes the printer a joy to work with. Buy one immediately!
@@DestructionBots I appreciate this information. I did find and add the G29 code to my slicer (although I will certainly try the M420 D1 to save some time!!!). I did use the piece of paper as my spacer just as I did when manual bed levelling. Unfortunately, this is still not working. I adjust set the Z delta in EEPROM but then when it goes to print (after G29 bed levelling) it's still way off the bed. Creality has tried helping out without success.
Hello, did you solve this problem? I have the same ...
@@bp2434 The short answer is No. I have set it once. The bed leveler picked up the slight deviations in the plate and then I just left it alone. Every month or so, I go and recalibrate, but otherwise I just go straight to print and it seems to work fine. At least I can print with it - for a while I kept attempting to calibrate each time and was completely unable to print. I was expecting the leveler to do the auto-calibration each time, but I guess not.
hi thanks for the video. i followed your instructions, i have run into the following problems. 1. i can not see the option of bed leveling. 2. bltouch continues to blink after touching the bed twice . my machine setting is for cr10/10s, i could not find cr10v2 in the list of machines. is there a way to get this working? thanks in advance.
I believe you have to select a custom machine and enter the parameters manually. I believe the sizes it asks for in mm is 300 x 300 x 400 and then 0.4 for the nozzle. Hope this helped.
1. update the firmware with cura. 2. if your BL is not stowing after deployment, then switch the black/white wires to perform a different polarity.
How does the new cr-10 mini compare to the new cr-10 v2? (both with resume print)
We don't have a new CR-10 mini yet
Hello, Thanks for this tutorial. I just purchased a CR-10 V2 (2.5.2 Motherboard) and a CR Touch? Did this tutorial and firmware are the right one if I install my CR touch instead of the BL Touch ?
Thanks in advance for your help and reponse
Best Regards
Cedric
Sorry, CR-10 v2 can't connect to CR touch
@@Creality3D Thanks for your answer. Can I connect a BL touch with my V2.5.2 motherboard?
Thanks a lot for your support and fast answer.
Waiting for your answer before ordering BL touch
I recently purchased a CR10 V2, with a Creality BLtouch upgrade, and like many others, it will not work. I am using Win 10 on a new PC, the proper version of Slicer and CR10V2/BLTouch firmware as well as following any instructions I can find. On power on, the BLTouch self-checks/drops and retracts the probe twice and appears working. However, the probe never again deploys and as such is not able to sense the bed and causing a probe failure on the end of the z-axis. Please help as I am about to return the entire purchase, CR-10 V2, Titan Direct Drive Extruder, Laser Engraver, and BL Touch. Then purchase a competitor. Frustrated please help as quickly as possible.
change the polarity of the red plug. black to white and white to black then re hook up. This will solve the issue.
I was not able to find the V2 firmware on the the links provided. Only the previous version. Can you point me to the CR-10 V2 firmware?
www.creality3dofficial.com/products/cr-10-v2-bl-touch-auto-bed-leveling-sensor
Top row of the product description
Can you make e video for the cr10s pro change to bl touch please?
we are working on and should release very soon.
Creality when is soon after trump leaves office
where is the firmware for CR-10 V2 it's not in the list on the google drive.
5:25 Filament seems to be to high from the bed?
Ha, noticed that as well!
Yes this is a huge issue with the BLTouch being that the BLTouch is supposed to keep this from happening. Sometimes it goes the opposite direction and grinds into the build plate. (ruined 2 of mine now and others have had the issue as well) This "CR-10V2" video isn't even using the updated firmware which makes it completely useless to V2 owners who purchased their machines after this video was created. I can follow this video with my CR-10 mini, but it doesn't have a BLTouch!lol
There is a seemingly endless amount of information for this board configuration, sadly for me I have yet to find an installation video for mine. 😞
The firmware seems to be missing the correct x-y offset for the BLtouch.
Did you get to fit It. Same problem here
It doesn't work with that firmware. I had to use the tinymachines one
I got the same BLtouch v3,1 and Cr10s but when I auto home it goes center of the heat bed and goes down and making blocking sound yeah I got a question can you please reply
Friend, could you pls make a video about your printer's problem and send it to cs@creality.com, then we will have very professional workers to help you.
Do I have to connect directly to a computer, or can I update the firmware with an SD card?
Needs to be connected to a PC. Preferably Creality Slicer.
Does a video for the Cr-10s will be available?
we will feedback to the company, thank you.
th-cam.com/video/fPUXS1lFPYQ/w-d-xo.html
do you have a video that shows how to setup the slicer "cura 4.4" to auto-level before every project?
temporarily we don't while we will feedback to the company.
I have the same question, is BL touch compatible with cura? How did you do it?
Jelle Zwart I have it figured out, message me on Facebook and I’ll send you the code and how to do it
The Orlando Wizard great thanks but do you also have Instagram (I don’t have Facebook)? 😁
Jelle Zwart you can find me on Instagram. It’s under the Orlando Wizard or how se the link on my TH-cam channel
Another look at the vid and I see exactly what many people are having trouble with when it comes to the BLTouch. The side to side to side leveling is horrible and it even SHOWS IN THIS VIDEO! In this case, the right side was too low and did not stick or "squish". In my case and others, the right side is too high and scratches the build plate surface!! The purpose of the BLTouch is to eliminate issue just like this one and even fails in the install vid.......how do these people sleep at night?
I've followed your instructions, and the bl touch is working but it doesn't probe the whole bed surface, it seems that it thinks that the bed is smaller, how can we change it from your custom firmware?
How many points are automatically leveled, you can change the number of points from the firmware.
Good Morning. I'm trying to install bltouch on cr10-v2 and I can't direct the port, it only has the AUTO option. How can I direct to some com port? Thanks.
please refer to this update tutorial video: th-cam.com/video/1n4zdkbW6Zw/w-d-xo.html
Why are you using a V2 with an older version of the firmware? I purchased my CR10V2 soon after this video was created and I cannot follow it due to the menu selections on the control box being different. I was able to figure out how to get the bed leveling to complete, but then there is not way to adjust the z to a negative value like you do in the video. The menu selections you are using are the same as my CR-10mini (older model)
Dear friend, the firmware version does not affect the adjustment of the z-axis compensation function. If you cannot adjust, you can download the firmware on our official website again, and then try to refresh the firmware again.
@@Creality3D Thank you for the response and information
The BL touch cable is wearing through because the fan is rubbing it . turn the BL touch so the cable is away from the fan.
This install work on a creality CR10 V3
Hello, I have done extactly what you show in your video but, It doesnt work. My printer screen is totally blue with no info
Update: I installed de wrong firmware (Bltouch Only) It's this one: drive.google.com/open?id=1uyERJ3xiOPIikhE46befFzffOunh0ebb
Same here. Isn't it cool how they brake it for you?
@@roninworks3497 Hello, I resolved this. My problem was I installed the wrong firmware called "Bltouch Only". The good one is under that one. Here:
drive.google.com/open?id=1uyERJ3xiOPIikhE46befFzffOunh0ebb
Hope you resolve this!
Thank you, "your" firmware worked perfectly.
What usb cable type does she use because it looks like android to me?
@@talonabuser1072 It's a Type B cable.
my kit doesn't even match the video and i ordered them together it took 2 months to get my printer and then an addition month to get the bltouch, and for it to not even be the right kit that i ordered!
Why is the BLTouch being sold for CR-10 without the extension cable? I mean, the CR-10 doesn't have the little housing as the V2 does, so the cable needs to be extended with a 1 meter cable in order to even try and use it
Sorry for the late reply, could you pls tell us which bl touch you bought? If you confirm that the model of your bltouch is correct, we can resend an extension cable for you
Your link take someone to the wrong purchase page. Needs updated.
What usb type does she use cuz I am lost is it an android cable?
USB to Micro USB
is it compatible with the cr-10 mini?
sorry no.
Will the firmware be the same for the newer model? CR10 V3?
th-cam.com/video/nnFryqRweTg/w-d-xo.html
@@Mindrier So it is the same as the V2. That's good to know.
I dont have the COM3 option for some reason in Slicer. I cant figure out how to simply get the firmware onto the printer. Does anyone know what I am doing wrong?
In my case, I checked first that in peripherical, my printer was on COM4, then I made the same protocol, but using COM4 ... Issue was OK
I had COM5 instead of COM3 or Nicopter MG's COM4, but my CPU configuration is atypical - MacBook running Parallels, Windows 10 - when I selected COM5 it worked correctly
so i tried this. when i turn it on the screen only stay blank and all the element start heating up. cant seem to fix it all
Same problem. Did you resolve this?
Is the bltouch for v1 main board or v2 main board?
CR-10 V2 is installed with a silent motherboard of V2.52
And?? How does this answer the question please?
does this work on the CR10 V3 ?
Yes, sir, there is a little difference, but you can take it as a reference.
i did everything like in this video. everything goes fine until i have to do the calibration.
When calibration finish the z axis starts to up, and do not stop until gets the top of printer. Even when it comes to the end, the motor still working, do not stop and very bad noise comes from spindle. This is the case of a CReality CR-10.
Please anybody can help?
Creality i hope your help.
Friend, pls contact our after servive team www.creality.com/service-request, they will solve your problem
Same exact issue here. Everything is perfect until I update the firmware. Even tried tiny machines version, but that one slams into the bed instead of the top.
Where is the video to install the Titan direct drive extruder you advertise with this model but does not exist??
Titan direct drive extruder is an option to add not default, and we should come out soon, thank you.
@@Creality3D Come on! Your advertisements did not say it is not available. Creality is losing trust again.
When i bought the printer i asked a guy from Creality sales and was told it came with the titan! All the photos online show it coming with it.
What to do if I can't select a com Port? It only Shows "Auto" and the it does not work. Please help. Thanks!
Solved! The USB cable was broken...
I follow this tutorial and the bl touch is not working and Creality denie me the warranty, bought the printer and kit direct from the official webpage!
I followed the video exactly. When I connected my laptop to printer via USB cable I got a message saying something like USB device exceeded power, spark flew from control unit and now all I see is a blue screen. Then I thought may be the machine should be on power to flash firmware, I switched on the machine, connected the USB cable and I was able to flash the firmware. But when I take off the USB cable all I see is a Blue screen. Only when the USB cable is connected to control unit I see a faint display - of the Creality home screen and it says 'STOPPED' on the screen. Can anybody advise what could be the problem?
Sorry for the late reply, we think your mainboard can not be used anymore. Pls contact our after-sell service cs@creality.com, and they will send you a new one
Can a CR touch work on this CR 10 V2?
CR touch only applies to 3D printers with a 32-bit 4.2.2/4.2.7 motherboard.This CR touch doesn't work for the 8-bit mainboard, Please make clear what version of your mainboard is before purchasing.
is this the same with the cr touch?
same function for auto bedleveling
Is there any for cr-10 S5?
Sir, you can take this video as a reference. There are only a few subtle differences between them
@@Creality3D thanks, I finally did it with some changes. The most important one was the interchange of pines in the stop cable (dual cable connector) to board in order to make the probe to work properly.
I knew that it was required because it's noted in Merlin source code, otherwise. Your video don't mention it.
Another detail not mentioned is that the settings have to be loaded every time you are going to print. At least, it's what I do since there's not clear direction.
I suggest you to created better supporting Information.
@@luisdelarosa7609 Friend, we really appreciate your advice. We will improve something that is not good enough at present. Thanks for telling us your opinions
when i plug the printer into my computer using USB, the computer doesn't detect that the printer is there. I cant install the firmware. the furthest that i can get to is 2:05 but i get an error message.
Hi Brandon - Im getting the same, have you resolved this?
Did anyone notice the first layer was horrible
They should have done another take look at the right side first layer it's not sticking to the bed and warped lol 😁try again
Yes, I saw that. Fixing that is what I want auto leveling for.
Thanks, I followed your guide EXACTLY, and now my CR-10 v2 won't display anything on the screen at all. Never got to use it even once. I'm returning this shit tomorrow.
Please see the post below!
5:23 no precipitation bed bug asdfasdf
Bed Leveling starts at 3:30
Can’t get Creality Slicer to see my printer. Tried 3 different cables. No option to set port to com3. Only shows com4 or auto.
Use COM 4.... hidden in the instructions, it does indeed say to use 'highest value port'.... it will work ok
Terry Cooper it didn’t work, couldn’t find the printer. It shows in my computer settings but Cura can’t see it. Tried using xloader and that failed too!
@@gazzaknight4474 did you set the speed to 115***
Terry Cooper yes, no joy.
hi, when I insert the usb cable into the PC the printer does not see my pc. Grazie.
Please try to connect with another USB cable.
@@Creality3D problem solved, BLTouch installed and working properly, many thanks.
@@sseldiablo1 how did you solve it? im having the same problem and tried multiple cables
@@tb1169 Hi, I simply changed the cable.
@@sseldiablo1 i had to find a driver online and install that. for some reason it wouldnt install it self from the SD card
I've been at this for HOURS on end. Mine homes to 11+ off the board, and MOVE Z, say's ZERO. I have to do -11.2, to get it near the board. If I save that, as my Z OFFSET, it tears up my Glass Bed
the offset shouldn't like that, some thing wrong, Gregg, please attach video emailing to our tech support to help you : cs@creality.com
no link for the firmware....
Sorry for the late reply, pls check this link www.creality.com/download
The Z offset feature on the CR 10 V2 is joke. I scratched my bed twice and in the end I just ended up using my dremel. I drilled new holes for the BL Touch. I achieved my measurements based on the tune-> baby offset function while it printed a first layer. I cut a piece of card board that I measured with my calipers and used the bed as a base to reposition the BL Touch. Now every time it goes home and zeros the Z axis, I never have to play with the build in Z offset function. Thingiverse has some calibration tools, @t
Cr10?
Sir, you can take this video as a reference if you plan to install bltouch on your Cr10. There are only a few subtle differences between them
creality use marlin firmware.... source code for all printer please .... cr10-v2 not source code ....
CR-10 V3 ???
th-cam.com/video/nnFryqRweTg/w-d-xo.html
Why you not provide link to that video with instructions??? In your files it's so crappy described, that from first time I damage my bed cover. THIS SHOULD BE WELL DESCRIBED IN YOUR INSTRUCTIONS, BUT NOT BY THE SEARCHING ON TH-cam! Kind a shame, creality.
Your explanations from the point your start A+B=C is very rushed. Try to be clear that is the most important step in the process. Do not rush it. I have tried it several times and either the Nozzle is too high or too low. I am about to return the BL touch and try manual. if manual fails i will return everything
I purchased the CR-10 V2 and BL touch but having issues. First i installed the BL touch firmware and got an error attached but i still install the firmware. Then when i did the Bed leveling with BL touch and stored the Z. When i begin to print after storing the appropriate Z, the nozzle is either too high or too low. Not sure what is happening
I even followed the video below and did
(1) Bed leveling
(2) move nozzle by moving Z close to print bed
(3) Save Z
sorry for all inconvenience, which store you buy from and order number? did you contact the store? thank you.
Do yourself a favor and pitch the BL in the trash. They are more hassle then they are worth.
THIS VIDEO COULD HAVE LED TO MY MAIN BOARD BEING BURNT!!!
The connectors shown in the video are supposed to be connected in the reverse order! I found it out the hard way... I connected them as shown here, and when I started my printer, I smelt something burning and my screen started flickering. Upon contacting Creality they sent me an installation video made by 3D printing Canada, which had the connectors placed in the reverse order to this.
This is highly unprofessional of a big company like Creality to have this video still online even after knowing that the video is misleading.
Shame on you Creality!!
Dear friend, I am very sorry for your encounter. Where did you buy the printer? Can you provide the order number?
@@Creality3D i bought it from an importer in India. But that is not the problem. Luckily I switched the printer off in time and saved my board.
The main issue here is that you guys (Creality) knows that the video is wrong and misleading and still they haven't done anything about it! Just putting a simple note in the video will be great.
@@apoorvbajpai4763 Dear friends, thank you for your suggestions, we will add text annotations in future videos. If the CR-10 V2 and BL touch you purchased are our products, the wiring sequence will not have any effect when the printer is turned off. You can see if your BL touch wire color order is correct. The correct color sequence of our wires is white, black, yellow, blue, and red.
@@Creality3D I already did it. by the way you can annotations in existing videos...
@@apoorvbajpai4763 Hey I bought the BLTouch from them, and my harness is in the order that appears in the video above. Should I rewire it? Which way? Their harness goes:
white(5v), black (ground) yellow(signal) blue (ground) red (5v)
-->rewire to this (Left to Right)-->
blue (-) red(+) Yellow (signal) black White
That sound right?
For those having difficulty, try the instructions found at th-cam.com/video/gHQ4WroVD6k/w-d-xo.html
Wow very hard to unders
This is the official software package: drive.google.com/drive/folders/1N_RVXtakOYS0uQJso0YY8yp2j1aFmoik
I’m having difficulties and this video doesn’t help much.
Dude this video is useless, watch this one instead th-cam.com/video/iwhbeD2AduA/w-d-xo.html . Unless you are installing marlin build from scratch omit the first half of the video start at 20:18 After you install pronterface and get a mini usb cable, grab your laptop as well
What a biggest waste of my money, I have been on this all day ,Keep getting probe failure It stops at the back right when doing Bed Levelling
You are supposed to manually level the bed FIRST. Now try it.
@@curtpangracs8684 I did do that, I removed it in the end, may go back to it. Soul destroying when you just can't figure it out. Thanks' for the reply
If anyone is running at CR-10 V3 here is the video for updating the software with links to the correct firmware. th-cam.com/video/nnFryqRweTg/w-d-xo.html
I had some trouble with the driver. This one works: sparks.gogo.co.nz/ch340.html
Shame on you Creality. I bought a BL Touch from Banggood, recently and after a perfect installation it only worked for 45 mins then burnt out. I wrote to Creality and asked for help. This was ignored and Creality here in the UK also would offer no support. I think its disgusting how I am treated . You should offer support and I was prepared to send this to you for testing.
if you buy a Ford dont complain to GM if it breaks. What part of you bought a BLTouch from Banggood dont you understand when complaining to Creality?
Creality does not make BL touch...
absolute useless tutorial for me... Nothing worked as explained, wirings are different and the speaker doesn't seem to have any clue... Go and get some external tutorial, you'll have more from it... sadly
thank you for your feedback, do you have problem? contact our professional tech support: cs@creality.com, we are happy to help.
Thanks for responding but after hours of trying on my own I've already managed to got it working. Just not with the video because of the points I mentioned before. The wires where different for me, Imy BLTouch kit haven't got the same connector (it had a splitted one) and following the instructions in the video didn't lead to a working solution...