Great video. Little tip for getting handlebar grips off - poke the straw from a can of WD40 or similar underneath and squirt a bit down there, should twist right off. Just remember to clean it off if you're replacing with new grips.
Yo, andy i got the same bike same color. I did the same thing, change the handlebars. But i also put a rear bafang 750w wheel hub with a 35 amp controller and a CSC front 1500w hub wheel with a 35amp controller too. Got a motorcycle signal switch and i installed front and rear signal lights front headlights, rear tail lights a horn. Change the gearing on it, hydraulic brakes. All i need is another big battery im saving to get one. Dude I done a lot of stuff to it and it fun and fast. Wish i could send you a pic. Well cant wait to see what you going to do to your fat bike. I know it going to be fast really fast Good luck mate!
Just ordered parts to do this on my Rad Mini 4 in the States. Using a Jones H-Loop bar now and it's just awkward. Feel like I'm flapping my arms like a dodo bird. Upgraded the controller and display last year with the stock 500w motor. A 750 arrives in a few days. Thanks for the handlebar tip !! Been looking forward to the change.
Dude I work in Central Park ny and living in Brooklyn , I ordered this bike and waiting for shipping, my home to work it’s like 5 miles and I’ll go to work with this , and can’t wait to upgrade to bmx handler thank u
I have an engine x which I'm happy with. I was thinking of fitting a bigger toothed crank though as the 7 speed tourney is a bit short on the gearing. don't particularly like the idea of ghost peddaling. it would be a cheaper and less aggro option to fit a 52+ tooth ring. what do you think?
I have the same caliper with the cover that falls off. If you lost the cover just put a 25 cent LR44 battery in it and a layer of electrical or rubber tape to hold the battery in.
That looks sweet, get thee sen a nice big head lamp on it pal ! .... great video, i have just ordered the Fiido M1 pro and i am going to do what you have done ... sweeeeeet !
I have a barracuda rogue 20x4 fat bike (36v 250w). I've changed the controller for a 1000w version and added a 52 volt battery ,it runs great with the stock 250w motor .Great acceleration and a top speed of around 25mph
@@choppedminx don't over juice it on takeoff, start off with lower throttle and build up as speed picks up, I've seen tram and train drivers pull the stick back gradually, couple notches at a time
Ah yeeeah, Andy that intro music just lit me up 😎. 1. The old school BMX steerer expander is good but if your arms are jacked they tend to fail loosing their grip. But this is usually doing crazy stuff on them and I know your not that inclined hehe. 2. The new handlebars are ace, they really transformed the look for the better with more confidence and control. Looking forward to the next upgrade !
This mod is a bit of a waste on the Engwe, because the adjustable handlebars are a really good feature that can give you a really comfortable riding position. A much better mod for the Engwe is just using a riser bar to give you a wider handle bar. The BMX mod is however a great mod for the Fiido M1 or M1 Pro which has a ridiculously stumpy fixed stem, and a really uncomfortable riding position if you're average height or over. In either case removing the stem is a totally unnecessary solution to the problems posed by either bike.
I have put a 52T in front, now it`s more relaxed. Now i`m looking if it would be possible to put a torque censor on it. So the power is more controllable.
i never found a video for doing this mod on my vitilan v3 ebike. This wa the only video that helped mje since it looked to be the same mechanism. This mod is perfect and I highly reccomend it to anybody wanting to do the same. For me I just had one person holding the bike while i was twisting the grip off slowly with two hands. This let me preserve the grips to reuse instead of ruining them.
you have made me buy the EP-2 :). been looking for an e-bike for going out and about and this one seems to fit the bill and isnt really expensive. and im a new sub.
I like the look but that +- button should be within reach without letting go of the handlebars. I am constantly switching pedal assist modes where I ride to get around tight obstacles blocking trails etc, too bad it couldn't reach the left top bar position.
Big up Andy its your number one fan, bike looking good, I've got the A20f. I'll like to show you my external upgrades some how if you like, however I'm very interested in your engine mods.
I got one yesterday but they seem to have changed the software it won't unlock. I've seen a few comments from others with the same problem. I think it is only models sold in the last month or so. Does anyone know a workaround or of other options.
I don't know about you, but the more that I Google looking for a new bike as a doner for some big power mods, the 20" fat bike is where its at, a lot look exciting. Especially if a 8kw motor paired with a 200a controller, it will either be hours of high power fun or 5 minutes of dangerous hair raising fun...
Im intrigued by what you're going to do to this bike. I have a barracuda rogue 20" fat bike. I do find the 250w motor is lacking. May look at possibly d Putting a 1000w conversation kit on it and seeing how that goes. I shall be watching this.
Dig what you are doing Andy. You know your stuff. A few companies make this style bike...maybe the same frame for all different brands Lectric XP 2.0 I believe is similar as an example.. I would like to hotrod one of these also. Put an aftermarket big amp controller inside the top tube and have a high amp 72V 20 amp-hr + battery made or make one yourself with bluetooth BMS in a shark type battery case with 21700 high discharge cells and screw it to the top tube which is square-ish and would be very solid. I want one of these for fooling around on as well. Cheers from the other side of the pond which is still the wild west for ebikes.
@@andykirby Thanks for getting back to me. I've checked the description and it's not there. You've mentioned the stem but not the handlebar and the part that grips the handlebar to the stem. Many thanks
Great vidros andy just got a question you had a engwe ep2 pro im gonna/ want to be putting 12 bike headlamps on my ep2 pro any idea were or how i get a live from the battery cheers Pete
Andy,great video and looks so much better with the mods.Dont know if you've already seen it but an American youtuber @DavidBrandNew did the same but he also modded to be folding BMX handlebars and it looks cool👍👍Is the Engwe EP-2 better than the ADO a20f?
WARNING: !!!! Bought an EP-2 in 2020 so I didn't have to use public transport in London (Covid). I rode it almost every day, a round trip of about 5 miles, and I would fold it and keep it in my house when not in use.. Today (08/03/23) , as I was about to head home, the frame snapped just behind the hinge. The bike is now in two pieces and nothing more than a pile of junk.
Hi Andy.. I have the 500watt model ..is it possible to add a front 500 watt motor ..making it a 2x wheel drive for off roading ( bush crafting) ?.. if so can you supply the necessary kit ?..Alan
Another fab video. Bike does look awesomeHappy new year to you. what was power and top speed before and after the mod. can this do normal peddling, cruise and pedal assist?
What about making contact with the guys who make the Electric Racing Bikes that are raced in the IOM TT and see if they will send you a kit of parts to build a faster bike.
I have a mammoth fat tyre and love it untill the chain come off and done my sensor in. Still got throttle but the milage has halved 18 miles top speed is 20mph with me on it around 18. The sensor is solderd to the control panel. Would you recommend i cut the sensor wires and attach a new one or will that be useless. Be great if you could get back to me will make a short video to show you what i mean thanks Bert&Smokey. 👌👍
Like the way you've modded the bike, although is the display a bit too low? Especially in bright sunlight? As you did this a year ago, have you done any more mods on it?
Andy, a link to stem & bars would be handy. Thanks
Whatever happened to the 40 mph video with the upgraded battery and motor for the Engwe?
The handlebars really change the look and handling of the whole bike. Best upgrade.
Great video. Little tip for getting handlebar grips off - poke the straw from a can of WD40 or similar underneath and squirt a bit down there, should twist right off. Just remember to clean it off if you're replacing with new grips.
Or compressed air
Useful info! Thank you!
Yeah this trick works a treat, takes a couple of seconds as opposed to fighting to twist the grips off
BMX bar is the best upgrade on my fatty (20") e-bike too. Night and day difference. Stability at its finest.
I bought a similar stem and it came with little spacer things to fill in the gap under your new handlebar setup
Yo, andy i got the same bike same color. I did the same thing, change the handlebars. But i also put a rear bafang 750w wheel hub with a 35 amp controller and a CSC front 1500w hub wheel with a 35amp controller too. Got a motorcycle signal switch and i installed front and rear signal lights front headlights, rear tail lights a horn. Change the gearing on it, hydraulic brakes. All i need is another big battery im saving to get one. Dude I done a lot of stuff to it and it fun and fast. Wish i could send you a pic. Well cant wait to see what you going to do to your fat bike. I know it going to be fast really fast Good luck mate!
Hi Andy can't wait to see what u doing with this one butty as I'm going to be doing the same on my ep2 500w
Cheers
The measurements for the stem were really useful, thank you!
Hi Andy" luv you're vids buddy, is this the engwe ep2 pro upgraded version, if so, what is the largest ah battery that will fit inside this frame,
I have to say those handlebars really did make that bike look a lot better
Just ordered parts to do this on my Rad Mini 4 in the States. Using a Jones H-Loop bar now and it's just awkward. Feel like I'm flapping my arms like a dodo bird. Upgraded the controller and display last year with the stock 500w motor. A 750 arrives in a few days. Thanks for the handlebar tip !! Been looking forward to the change.
i'm totally changing my Engwe p2.
Dude I work in Central Park ny and living in Brooklyn , I ordered this bike and waiting for shipping, my home to work it’s like 5 miles and I’ll go to work with this , and can’t wait to upgrade to bmx handler thank u
I have an engine x which I'm happy with. I was thinking of fitting a bigger toothed crank though as the 7 speed tourney is a bit short on the gearing. don't particularly like the idea of ghost peddaling. it would be a cheaper and less aggro option to fit a 52+ tooth ring. what do you think?
52T is the way to go, my first bike came with 52, the next 2 come with 48T, I upgraded the 750w bike to 52
I have the same caliper with the cover that falls off. If you lost the cover just put a 25 cent LR44 battery in it and a layer of electrical or rubber tape to hold the battery in.
Brilliant video, can’t believe that you are doing the conversion, that’s what I want to do, I have sent you an email . Great work!
Andy is your kirbebike website down, I can’t get on it.
Informative and interesting. Love watching the videos. Bike looks brilliant
Great video Andy. I love the mod. Can't wait to see the big motor mod!
With those BMX handlebars she looks fantastic. I need to put it on my Engine Pro 2.0 😍
That looks sweet, get thee sen a nice big head lamp on it pal ! .... great video, i have just ordered the Fiido M1 pro and i am going to do what you have done ... sweeeeeet !
Can you let me know how it goes with the handlebar mod on the M1 pro. As I have that bike too. And would like to do the same.
@@fender1000100 FB groups for Fiido mate, plenty of them I post on.
@@troyboy4345
Okay thanks.
website is down mate, getting a 502
Me too
It reminds me of the old Raleigh Grifter.
Very cool
I’ve got the engine pro and the bars are definitely getting swapped out.
Thanks for the links, bought the parts to do this too!
Really great video, i'm looking to do the same to my Engwe 'clone' from china 😀Thanks for sucha a great vid!
I have a barracuda rogue 20x4 fat bike (36v 250w). I've changed the controller for a 1000w version and added a 52 volt battery ,it runs great with the stock 250w motor .Great acceleration and a top speed of around 25mph
Nice it didn't fry the motor or Anything?
@@A1Bokeh no problems at all at the moment, and I abuse it 😉
@@choppedminx freakin awesome
@@choppedminx don't over juice it on takeoff, start off with lower throttle and build up as speed picks up, I've seen tram and train drivers pull the stick back gradually, couple notches at a time
Still running at 1000w+ I don't hold back, just open her up! No probs at all, after about 3 years@@manFromPeterborough
Hi, did you buy the 25.4 stem or the other one?
I know im late but dang! That looks better than i would have thought! Reminds me of the Raliegh BMX i loved as a teen.
This is the type of bike Halford should be selling, better than the boring 20" ones they have for sale.
Good video Andy👍
You need to get into 3D printing, very handy for making Mount's for controller's and stuff
Ah yeeeah, Andy that intro music just lit me up 😎.
1. The old school BMX steerer expander is good but if your arms are jacked they tend to fail loosing their grip. But this is usually doing crazy stuff on them and I know your not that inclined hehe.
2. The new handlebars are ace, they really transformed the look for the better with more confidence and control.
Looking forward to the next upgrade !
What are the measurements on the bars?
This mod is a bit of a waste on the Engwe, because the adjustable handlebars are a really good feature that can give you a really comfortable riding position. A much better mod for the Engwe is just using a riser bar to give you a wider handle bar. The BMX mod is however a great mod for the Fiido M1 or M1 Pro which has a ridiculously stumpy fixed stem, and a really uncomfortable riding position if you're average height or over. In either case removing the stem is a totally unnecessary solution to the problems posed by either bike.
I just got my ENGWE ep2 pro … excited to jump on this
Andy, any links or info re swapping the brakes around? Cheers.
I have put a 52T in front, now it`s more relaxed.
Now i`m looking if it would be possible to put a torque censor on it. So the power is more controllable.
Is there any way you can put those handlebars with the folding mechanism? Get both of both worlds?
Could you put some links to the parts for the conversion please ? Thank you .
Andy mate, you can get spacers to fill that gap under the stem. Any bmx shop should sell them.
FINALLY and ENGWE bike mod, i like the bike visually so much
Nice job. Better than others that I've seen.
What's the rise on the handlebars? The link opens the size front page.
Starting to see why you didn't show taking the stem off, I can't get mine of the bolt is stuck it's driving me nuts.
Hi could you please provide me with the parts that you mentioned you sell to upgrade the power please
i never found a video for doing this mod on my vitilan v3 ebike. This wa the only video that helped mje since it looked to be the same mechanism. This mod is perfect and I highly reccomend it to anybody wanting to do the same. For me I just had one person holding the bike while i was twisting the grip off slowly with two hands. This let me preserve the grips to reuse instead of ruining them.
Nice. How did you mounted the rear light? I want to remove the rack on the back to
Looks great with those bars. Real hooligan style. Could definitely get up to some trouble on it now.
Omg SO THATS WHY THE STEM WOBBLES LIKE f**k ! Ridiculous design! Great video 🎉
Whatever happened the big motor mod on this bike ?
you have made me buy the EP-2 :). been looking for an e-bike for going out and about and this one seems to fit the bill and isnt really expensive. and im a new sub.
I like the look but that +- button should be within reach without letting go of the handlebars. I am constantly switching pedal assist modes where I ride to get around tight obstacles blocking trails etc, too bad it couldn't reach the left top bar position.
Big up Andy its your number one fan, bike looking good, I've got the A20f. I'll like to show you my external upgrades some how if you like, however I'm very interested in your engine mods.
Get some 1 1/8 spacers for the stem
Is there a cheap battery mod for the super 73 s2 as the chi system is £1000 just want more range thanks
Much much nicer! Congratulations.
I got one yesterday but they seem to have changed the software it won't unlock. I've seen a few comments from others with the same problem. I think it is only models sold in the last month or so. Does anyone know a workaround or of other options.
How does it look like folded? thanks
I don't know about you, but the more that I Google looking for a new bike as a doner for some big power mods, the 20" fat bike is where its at, a lot look exciting. Especially if a 8kw motor paired with a 200a controller, it will either be hours of high power fun or 5 minutes of dangerous hair raising fun...
Im intrigued by what you're going to do to this bike. I have a barracuda rogue 20" fat bike. I do find the 250w motor is lacking. May look at possibly d
Putting a 1000w conversation kit on it and seeing how that goes. I shall be watching this.
Isnt it a 750w from the start?
You an get carbon fibre headset spacers to fit that gap
Yeah good idea!
Is there any other fat tire bikes, same size but with more power, around 50+ to 60 kph top speed?
Good looking bike, the Carrera model looks simular to the one I own
Dig what you are doing Andy. You know your stuff. A few companies make this style bike...maybe the same frame for all different brands Lectric XP 2.0 I believe is similar as an example.. I would like to hotrod one of these also. Put an aftermarket big amp controller inside the top tube and have a high amp 72V 20 amp-hr + battery made or make one yourself with bluetooth BMS in a shark type battery case with 21700 high discharge cells and screw it to the top tube which is square-ish and would be very solid. I want one of these for fooling around on as well. Cheers from the other side of the pond which is still the wild west for ebikes.
You can get some spacers to go in that gap at any bike shop
Amazing! I will do the exact same. Dude I'm 5"10 how is it with the handler bar is it not too low?
Whoa 😳 great job 👏
Whats the width of the bars 6.75inch or 8inch?
I just came flying off my Engwe because the stock handlebars came loose. Can you please share which handlebars and socket you purchased?
It's all in the description 👍🏼
@@andykirby Thanks for getting back to me. I've checked the description and it's not there. You've mentioned the stem but not the handlebar and the part that grips the handlebar to the stem.
Many thanks
Just need a few MTB stem spacers for under the stem?
Great vidros andy just got a question you had a engwe ep2 pro im gonna/ want to be putting 12 bike headlamps on my ep2 pro any idea were or how i get a live from the battery cheers
Pete
Do u need the quill stem or could u just use the silver bit that you see when you take off the folding bars
Brilliant new subscriber enjoying your videos ..
Good to see the Town Park 👍
i wanted to replace just the handlebar but doing this makes it look zo much more awesome, i'm gonna do this too
Get some black 1 1/8" mtb spacers for your stem to tidy it up 🤙🏻🤙🏻
Came here to say this. No need to cut down the stem
Great vid. How in the heck do you remove the throttle from the og handlebar??? All the other bits are simple
There's usually a tiny little hex screw underneath somewhere.
Andy,great video and looks so much better with the mods.Dont know if you've already seen it but an American youtuber @DavidBrandNew did the same but he also modded to be folding BMX handlebars and it looks cool👍👍Is the Engwe EP-2 better than the ADO a20f?
Stem spacers?
hey m8. Any idea of where i can get a set of fenders like those? thanks
WARNING: !!!! Bought an EP-2 in 2020 so I didn't have to use public transport in London (Covid). I rode it almost every day, a round trip of about 5 miles, and I would fold it and keep it in my house when not in use.. Today (08/03/23) , as I was about to head home, the frame snapped just behind the hinge. The bike is now in two pieces and nothing more than a pile of junk.
DID you contact Engwe then ?
What's wrong with the 48V 1000W motor? Seems to be the industry standard.
What's the difference between these and the Engwe engine Pro?
Hi Andy.. I have the 500watt model ..is it possible to add a front 500 watt motor ..making it a 2x wheel drive for off roading ( bush crafting) ?.. if so can you supply the necessary kit ?..Alan
Don't like folding bikes but I like that 👌
How were you able to stick the rear light without the rear rack? I can't figure out where to mount the rear ligh
What size your stem pork and handlebar thank you
The future reference you can get scaling rings which are used for tall people that would fill in the gaps
Where can I get one?
Intro was a banger
Hi sir, what size of your bike handle bar that you modify in the engwe? Thanks
Another fab video. Bike does look awesomeHappy new year to you.
what was power and top speed before and after the mod. can this do normal peddling, cruise and pedal assist?
Your website is not loading.
What about making contact with the guys who make the Electric Racing Bikes that are raced in the IOM TT and see if they will send you a kit of parts to build a faster bike.
Hi which bike would you recommend for commuting to work (5miles) and back Fiido m1 or the engwe ep-2
put spacers under the bars to get the stack height correct.
I have a mammoth fat tyre and love it untill the chain come off and done my sensor in. Still got throttle but the milage has halved 18 miles top speed is 20mph with me on it around 18. The sensor is solderd to the control panel. Would you recommend i cut the sensor wires and attach a new one or will that be useless. Be great if you could get back to me will make a short video to show you what i mean thanks Bert&Smokey. 👌👍
WHERE IS EPIDODE 3 OR THE VIDEO WHEN YOU ACTUALLUY UPGRADE IT, IM LOOKING TO BUY THIS KIT
Like the way you've modded the bike, although is the display a bit too low? Especially in bright sunlight? As you did this a year ago, have you done any more mods on it?
Cool mods Andy. I've got a Hitway BK6, and I really dislike that long folding stem. I'm fitting BMX handlebars this coming week.
750 nominal or peak?