Yamaha Single Intake Manifold review.. BiP vs. KJS

แชร์
ฝัง
  • เผยแพร่เมื่อ 17 ต.ค. 2024

ความคิดเห็น • 27

  • @CustomMax1
    @CustomMax1 3 ปีที่แล้ว

    Hi @ all, I ride this KJS System on my XV1000 56v since now 8 Years. I can only say, it´like a new Bike. It run´s well makes no Problems in all that Time. Thx Ken Staples for that piece. Keep on Riding

    • @ozzztrich
      @ozzztrich 2 ปีที่แล้ว +1

      where can i buy single carb kit for my xv1100?

  • @Khemore
    @Khemore 8 ปีที่แล้ว

    what yamaha are the manifolds for the xv535? or is it another model? and where did u buy also what carps are u using? :) Sry for the many questions.
    Regards
    Khemore

  • @idobertotorres-blockbirdsm7453
    @idobertotorres-blockbirdsm7453 3 ปีที่แล้ว +3

    Puedes decirme como bajo el consumo de combustible con el single carb..?

  • @sonofoleg
    @sonofoleg 4 ปีที่แล้ว

    good day sir! could you tell me if you are aware of the carb jetting?? thank you in advance

  • @eflanagan1921
    @eflanagan1921 9 ปีที่แล้ว +2

    Fuel is falling out of suspension with bip . Also the drilled main probably won't meter and pass fuel into atomization as precisely .

    • @nunyabizniss6934
      @nunyabizniss6934 8 ปีที่แล้ว +2

      +E Flanagan I'm not an advocate of drilling jets. Ever. Go buy a bigger size for $2.

  • @idobertotorres-blockbirdsm7453
    @idobertotorres-blockbirdsm7453 3 ปีที่แล้ว +1

    Saludos desde Maracaibo City, Venezuela, podrias darme las dimensiones y diametros fr losbdos manifold el gris y el negro, tengo un XV1100cc y el carburador Mikuni BST40

  • @hrbestalkinme3690
    @hrbestalkinme3690 6 ปีที่แล้ว

    That FCR is the best carb on the market. It alao has an accelerator pump that kicks ass. Throttle response will be 10x better going from idle to WOT quickly

  • @larryzimmerling3900
    @larryzimmerling3900 9 ปีที่แล้ว

    Could you tell me the model of Mikuni carb you went with and if there was any modifications done to it ( bigger jets etc )

    • @lorcorpskyline
      @lorcorpskyline 5 ปีที่แล้ว

      It's a Tm40-6 .. he probably just got rejetted to accommodate the extra flow.

  • @nbgaf1040
    @nbgaf1040 5 ปีที่แล้ว

    Did you have any problems getting your order the only reviews I gave seen of that company all complain of no tracking/ shipping info

  • @dennisharrison4744
    @dennisharrison4744 6 ปีที่แล้ว +1

    I tried every thing on mine it just fouled plugs like crazy espesaily the front used so much gas when you use one carb you got twice the vacuum pulling on it I leaned mine way down I tried difrent carb still suck gas i have bosh platinum plugs in it hotter ones they been in it 4 years and havnt fouled my carb I got on mine the Hitachi carb one runs the best on it kehine 110 main jet some one says its to small but plugs are a perfict tan been running on it long time I helped another guy fix his its been running long time to

  • @sylvestrepalacios7530
    @sylvestrepalacios7530 4 ปีที่แล้ว

    Hi I know its years late but you happend to be selling your first manifold thinking of doing a single carb conversion on my 94 xv750

  • @josh.t24
    @josh.t24 6 ปีที่แล้ว

    did you rejet the carbs?

  • @raimundorodriguesdealencar3237
    @raimundorodriguesdealencar3237 2 หลายเดือนก่อน

    I'd like tô buy your old carburador.

  • @dennisharrison4744
    @dennisharrison4744 6 ปีที่แล้ว

    Some one bored my jet out the same I put a 150cc scooter jet in it and it's a 110 main jet I get 35mpg was geting 8 mpg I unhook the boost sensor vacuum line runs awesome tan plugs unhook your vacuum line to the boost if you got one mines been runnig awesome 6 years mines a kjs intake

  • @dennisharrison3114
    @dennisharrison3114 8 ปีที่แล้ว

    IV got a jks on my 1000 it suck gas IV got a 105 kehin jet in it now for last 4 years came out of a China 150cc scooter carb got the boost sensor vacum line caped off to it was fouling plugs like crazy plugs in it now 4 years old bosh platinum 2s runs great 40 miles a gallon

  • @thadmandin3796
    @thadmandin3796  6 ปีที่แล้ว

    I used the stock cable.

  • @guillermofernandez2586
    @guillermofernandez2586 2 ปีที่แล้ว

    Necesito para mi vulcan vn 750 una adaptación así

  • @victorwest8041
    @victorwest8041 2 ปีที่แล้ว

    sportster

  • @carlosalbertocamodeca7941
    @carlosalbertocamodeca7941 2 ปีที่แล้ว

    En castellano

  • @tommyknox7496
    @tommyknox7496 5 ปีที่แล้ว

    kjs is junk....buy a metal manifold, plastic is for toys

    • @JohnGarcia-mm2ej
      @JohnGarcia-mm2ej 4 ปีที่แล้ว

      What manifold do you recomend for the 2 into 1 conversion?

    • @danieleross8776
      @danieleross8776 3 ปีที่แล้ว

      Kjs plastic? It's alloy