In the process of putting Vintage Air in my 69 Camaro... Its not bad at all. But I can tell you this is THE Best Installation Video on TH-cam. Vintage Airs Installation Videos aren't this good. Great job Sir.
This video was not only a perfect tutorial but was easy to watch. A lot of people on TH-cam spend too much time with the chit-chat. I was honestly thinking that our '81 Camaro would never have A/C but after watching your video I'm not even stressing about installing the system. If fact, I'm about to order the kit now. Thanks for breaking it down and showing us all how it's done. Good job!
I posted a year ago that I was ordering my Vintage Air system... well, the transmission went out in my truck, so that took priority. I have now ordered it, and it will be here around the middle of January! I just rewatched this video, and I am pumped to finally get this done. Man, thanks again for the video! I'll have it playing throughout the entire install!! Great tutorial! 👍
Best video I've seen yet on installing the Vintage Air system. I started the install today on my 1985 Winnebago motorhome with the universal kit. I'll be watching this tutorial multiple times as I go through the install process. Great job and and Thanks!
I am in the process of installing vintage air in my 1970 Camaro. A lot of the same steps. They did change the bracket that you notched for the heater hose that no longer needs to be fabricated.
You probably dont give a shit but does someone know of a method to log back into an Instagram account..? I was dumb forgot my password. I would appreciate any help you can offer me.
My challengers install seems difficult but in different ways. Great video. I think any of these installs takes some balls, but then again thats part of owning these cars.
Excellent videos Klowny! I just completed putting Vintage Air, electric fan, and a Holley Sniper on an 81 Camaro and I continued to come back to your videos for reference since it’s basically the same car.....Thanks man!!!
Thanks for the video. It’s still relevant. We are restoring a 1980 Firebird and used your video for the removal of the old system. The camaro and Firebird are close but not exact. Again thanks for the video.
Awsome job and so far the best and most complete video on how to do "a job"...!!! Now my turn, waiting for the kit for my 1979 Corvette (using a 1976 one since they do not make one for the 79. Wish me luck!). :D
About to buy the sure fit for my 74 Corvette. Looks like installing its going to take awhile, great video, this is the best info Ive seen for vintage air as far as installing goes
Nice very nice clean install, I've only had my engine and trans rebuilt so far can't wait for wiring and suspension then I can at least drive it as I do this and that 70 RS. good inspiration thanks.
Agreed, very detailed and QUALITY video shots. Better than most manufactures ! Why not paint the compressor brackets 100% ? Also, how much better is this complete system vs. the factory A/C set up when it was working ? Lots of folks do away with the R4 compressor replacing it with the SD-508 and get good results in just that.
Thanks Clown ! Im about to make a run at this on my 1980 Chevy truck this weekend and your video was pretty in depth and I’m pretty sure it’s going to be useful.
Cheers Klowny, great video, having seen this I am going to hold off until I am ready to recover the dash, and install a Dakota digital dash, then respray the wheel arches, and do the lot in one go. Great help, keep um coming
I have used that compressor in my 95 chevy 2500 when the pancake R4 went out it blows 35F!!! I want to do something like this but with an underdash ac evaporator from back when.
Great video! I want to do this system on my 81 z28. The only thing i dont like ( no fault of yours) is the way the ac lines run across the engine. I wish they designed it with the condensor lines on the other side so the lines could easily be routed on the driver side of the inner fender and down to the condenser. It would be a much neater install. But your video is great! Thanks for the guidence
I wish you were here in Western Australia. I would love to get you to install my vintage air! I got the compact 2 kit and it's universal.. but because of that you pretty much have no info on anything besides your excellent tutorial. Thanks.
Please consider making a video of you installing a vintage system in your third gen as no one else has. There is no dedicated kit but it would be nice to see a system modded to work in a third gen.
Hey Klowny awesome video! You covered everything in awesome detail. One question, did you have to install a throttle stop solenoid on that carb to kick it up at idle when the compressor engages? I’m doing a similar install on a truck that had AC but the carb is aftermarket.
Absolutely awesome video! I am in process of building my 72 Camaro dash by 3d modelling and printing and AC would be nice addition.. the old AC has still some parts, but most is gone when former owned did a LS1 swap. Also the fans have now no power and so on.. so new AC would be great.. I am so happy I saw this video, because answered so many questions I had! Only problem I might have is the new engine and how to fit the new AC to it. If yo have any tips or info on that, please share!
Solid video. I’ll probably be doing the same shortly to avoid trying to make the old stuff work. Only question is how loud is the blower fan since it’s now inside the car?
I've removed my ac box before and never once have I had to cut the box to remove it. If your not going to use it ever again ok I don't see a problem with it but I just think it can be a waste though because it still looks usable.
I had a battery jump out of it's cradle into the Power wires to the compressor and after I fixed the cut wires that the battery cut the compressor wont turn on and I can't see a in line fuse anywhere to the light blue wire that go to the dry, could you give me a good guess what may have shorted out ? I had a man install it and he went out of business. PS... I did how ever run a power wire to the compressor via a toggle switch, is that a bad idea ?
This video is so helpful. Almost got my system completely installed baby! One question...is a two groove power steering pulley required or can you make it work with one groove and just route the compressor belt straight to the crank and bypass the PS puley? My PS setup just has a single groove - already ordered the 3-groove crankshaft pulley.
Job done...blowing ice cold baby! Thanks again for this...never would have tried on my own without this video. Took me a couple of months solo ops. Learned a lot in the process. Two groove PS pulley is 100% needed in addition to 3 groove crank pulley for any of those wondering.
Great video man! I have a 1975 Camaro and the guy that I bought it from removed everything for the AC away from under the hood. I was wondering would it be cheaper to just buy the compressor and condenser from autozone since I still have the ac switches on the inside of the car?
Personally I like vintage air because it cleans up the firewall alot..as far as price, you will have to price out the parts u need vs the vintage air unit..thanks for watching
What a great video. Intuitive and to the point. Liked and new subscribe from me. I’ll be wanting to do this in near future when I start my interior work on my 1980 z28 Camaro. Thanks bro!
Great video. Having just installed a vintage air unit in a Factory5 Daytona coupe, I recognized a lot of the bits and pieces... but how did you keep your hands so clean?
Great Video!!!!! I have not watched any of your other videos, but I'd have to guess you do a great job on all of them by this one. What did the entire system cost?
Hey my brother I'm doing the same install right now. I know it's been awhile but can you tell me about how many feet of heater hose you needed to do this install. Thank you very much
Notice you have nice headers on that thing. How is it for ground clearance since you lowered it 2 inches? I remember mine was pretty low with a stock suspension back in the day, I couldn't imagine it lower.
klowny1969 I would imagine... I think I’d have to go with the hooker shorties if I dropped it. How much of a difference is the drop on that thing as far as handling and performance?
Jay0321 car does handle better..the suspension geometry is a little off..u can tell when u make a turn and it doesn't return to the straight position by itself..drop spindles would be better..other than that it handles nicely
In the process of putting Vintage Air in my 69 Camaro... Its not bad at all. But I can tell you this is THE Best Installation Video on TH-cam. Vintage Airs Installation Videos aren't this good. Great job Sir.
1969Scooch thank u
Agreed💯
Klowny! Thinking about vintage air for my old truck!
Thanks!
This video was not only a perfect tutorial but was easy to watch. A lot of people on TH-cam spend too much time with the chit-chat. I was honestly thinking that our '81 Camaro would never have A/C but after watching your video I'm not even stressing about installing the system. If fact, I'm about to order the kit now. Thanks for breaking it down and showing us all how it's done. Good job!
Awesome! Glad I was able to help you out and don't forget to subscribe
I posted a year ago that I was ordering my Vintage Air system... well, the transmission went out in my truck, so that took priority. I have now ordered it, and it will be here around the middle of January! I just rewatched this video, and I am pumped to finally get this done. Man, thanks again for the video! I'll have it playing throughout the entire install!! Great tutorial! 👍
Did anyone else have a problem with the power steering pump bracket?
I'm not a comment type of guy but feel that I should here. This video was as great as it was thorough. Nice job, many of us appreciate it!
Thank you for taking the time to comment
THE Best Installation Video on TH-cam. Vintage Airs Installation Videos aren't this good. Great job Sir.
Thank you!!! Don't forget to subscribe
Best video I've seen yet on installing the Vintage Air system. I started the install today on my 1985 Winnebago motorhome with the universal kit. I'll be watching this tutorial multiple times as I go through the install process. Great job and and Thanks!
Awesome..good luck with the install and thanks for watching..please don't forget to subscribe
Fantastic job to show how easy it actually can be done by the average person . Cheers buddy.
thank u steve ! that's exactly what i was aiming for with the vid..to target the DIY'er..Always a pleasure to hear from you!
Vintage Air should pay you for this video.
Super Duty 455 lol thanks
yeah, good point
@@klowny1969 hey klown what's your email I want to contact you about installing this kit on my 3rd gen
I am in the process of installing vintage air in my 1970 Camaro. A lot of the same steps. They did change the bracket that you notched for the heater hose that no longer needs to be fabricated.
Hello John ,Yes I used their products on my C-7 Z06 . I Reccomend the products that you installed on your C-7 Corvette. Great Video as Always !!!
Dude, this video is awesome! However, it's helped me come to the conclusion that I should just hire someone to do this for me. haha! Thanks!
dafontenot lol thanks for watching and commenting
It's done the opposite for me! Instead of paying $1500 for someone to do it, I'm now sure I can do it myself!!
Same here- I’m more of a red green mechanic with duct tape. I don’t think it would work on this project
What's a good number for install cost?
You probably dont give a shit but does someone know of a method to log back into an Instagram account..?
I was dumb forgot my password. I would appreciate any help you can offer me.
You have no idea how much this video helped me, I was looking everywhere to see how to instal the brackets
Awesome..dont forget to subscribe!
That's what we all need a Master Klowny Mechanic !!
Great job and video man, thanks for teaching us kids!
Thanks for watching and commenting
You make it look deceptively easy! I'll bet that this job took several days!!
It wasn't too bad lol took couple days due to filming..thanks for watching and don't forget to subscribe 😉
Honestly most complete video I've seen on TH-cam. Great job..
thank you..dont forget to subscribe
Fabulous Vid for Vintage Air, I'm putting in my 1972 El Camino right now! Great Job
RicK Wells thanks for stopping by
RicK Wells show the video for the el Camino please
My challengers install seems difficult but in different ways. Great video. I think any of these installs takes some balls, but then again thats part of owning these cars.
this video is exactly what i needed, a step by step process. No fluff, no watching the camera swing from here to there. Thank you Sir!!!!
Thanks for watching..also check out the link in my description for my apparel
Excellent videos Klowny! I just completed putting Vintage Air, electric fan, and a Holley Sniper on an 81 Camaro and I continued to come back to your videos for reference since it’s basically the same car.....Thanks man!!!
Awesome! Yes it's the same build! Dont forget to susbscribe
Thanks for the video. It’s still relevant. We are restoring a 1980 Firebird and used your video for the removal of the old system. The camaro and Firebird are close but not exact. Again thanks for the video.
glad i was able to help you out..dont forget to subscribe
Really good video. Its about time someone has put an in depth instructional video on.
tamiya frog thanks for watching and commenting
Awsome job and so far the best and most complete video on how to do "a job"...!!! Now my turn, waiting for the kit for my 1979 Corvette (using a 1976 one since they do not make one for the 79. Wish me luck!). :D
Enrico Dubaiese thank u..good luck with your install!
About to buy the sure fit for my 74 Corvette. Looks like installing its going to take awhile, great video, this is the best info Ive seen for vintage air as far as installing goes
Sir you really must to have manual dexterity to be able to do so many of the exacting procedures you did here. You are a wizard a true star!!
Thank you for the kind comments..don't forget to subscribe :)
Nice very nice clean install, I've only had my engine and trans rebuilt so far can't wait for wiring and suspension then I can at least drive it as I do this and that 70 RS. good inspiration thanks.
Awesome..good luck with the 70!! Also dont forget to subscribe..thanks!!
Agreed, very detailed and QUALITY video shots. Better than most manufactures ! Why not paint the compressor brackets 100% ? Also, how much better is this complete system vs. the factory A/C set up when it was working ? Lots of folks do away with the R4 compressor replacing it with the SD-508 and get good results in just that.
Thanks Clown ! Im about to make a run at this on my 1980 Chevy truck this weekend and your video was pretty in depth and I’m pretty sure it’s going to be useful.
Glad I was able to help!
The blower and evaporator housing is so easy to remove amd replace! wow. i love the american car designs!
Buda Bunda yes..it wasnt too bad..thanks for watching and commenting
Absolutely love this video, getting ready to do this on a 73 Firebird, thanks man...ALOT!
Thanks for watching and good luck! Dont forget to subscribe and hit that bell :)
Great job brother, has to be one of the best and most in depth videos on doing this.
Michael Johnson thank you sir
*I am hoping to install one of these kits in my 1976 Camaro one day.*
I have a 1975
What does this cost if I wanted it done by a mechanic?
Cheers Klowny, great video, having seen this I am going to hold off until I am ready to recover the dash, and install a Dakota digital dash, then respray the wheel arches, and do the lot in one go. Great help, keep um coming
thank you sir! good luck with your ride..dont forget to subscribe
im getting ready to do vintage air in my 1980 camaro and im happy to do it because louisiana has brutal summers
Lane Blount good luck
Great Job!!! Awesome detail. Thank for taking the time to film this incredible project. :D
Thanks for watching..don't forget to subscribe
This video helped me more than vintage air video
thank you..dont forget to mention that to vintage air lol
Good Video and very well done. Your voice reminded me of one of my favorite comedians
Father Guido Sarducci
Thanks..you aren't the first one to say that lol..don't forget to subscribe
That is one hell of an involved project! Great work!
Giuseppe Verdi thank u
I have used that compressor in my 95 chevy 2500 when the pancake R4 went out it blows 35F!!! I want to do something like this but with an underdash ac evaporator from back when.
Beautiful install Manny. Looked just like a factory job when done. That kit you used was really nice!
Fireship1 thank you..vintage is air is the best kit in the business..they make awesome stuff..thanks for stopping by
Amazing how-to. Great Job, Klowny!!!
thank you sir..dont forget to subscribe
Great video! I want to do this system on my 81 z28. The only thing i dont like ( no fault of yours) is the way the ac lines run across the engine. I wish they designed it with the condensor lines on the other side so the lines could easily be routed on the driver side of the inner fender and down to the condenser. It would be a much neater install. But your video is great! Thanks for the guidence
Thanks for watching and commenting! Don't forget to subscribe 😉
IFOLLOWED YOUR INSRUCTIONS FOR VINTAGE AIR INSTALL IT WORKS PERFECT THANK YOU SO MUCH YOU ARE THE MAN
Awesome..glad I was able to help you out..don't forget to subscribe
I'm glad the Klown straps up for Bryana
she knows da deal
Thanks for the info, pretty in-depth on hooking up the Trenary switch
Thank you for watching and commenting..don't forget to subscribe
Another great video , learned a bit by watching them .
awesome..thanks for watching
Great video man! I got a lot of info from your video I was needing. Job well done sir!
TypeLT76 thanks for watching
O yeah that's nice love seeing the old school camero with Ac
Yes its a beautiful thing..thanks for watching and commenting
thanks for sharing, very informational video, even only the dash removal part alone is very useful.
Tamas Kalman thanks for watching
Thanks for this video. I have factory air but it isn't working right now. This looks totally doable in my driveway.
yes it does..thanks for watching..dont forget to subscribe and hit that bell
I wish you were here in Western Australia. I would love to get you to install my vintage air! I got the compact 2 kit and it's universal.. but because of that you pretty much have no info on anything besides your excellent tutorial. Thanks.
Lol..sorry kind of too far haha..thanks for watching..dont forget to subscribe
Please consider making a video of you installing a vintage system in your third gen as no one else has. There is no dedicated kit but it would be nice to see a system modded to work in a third gen.
That is something that I might do..I need to contact vintage air
Great video. "She knows the deal"
Lol thank you! Don't forget to subscribe
@@klowny1969 ok you twisted my arm
Excellent demonstration video, thank you for sharing!!!
Jeff G thanks for watching
Great detailed job i watched the whole video and I dont even have a camaro
Thank you..don't forget to subscribe
Hey Klowny awesome video! You covered everything in awesome detail. One question, did you have to install a throttle stop solenoid on that carb to kick it up at idle when the compressor engages? I’m doing a similar install on a truck that had AC but the carb is aftermarket.
Excellent... You're detail oriented like I am.
Thank u..thanks for watching
I needed that Evaporator box!! :(
Great job of the presentation
Thank you..don't forget to subscribe 😉
great videos! Please keep them coming!
Luis Rebolledo will do..thanks for watching and commenting
Great video. Thanks for putting in all the time.
Moletastic69 thank u
Outstanding Job!!!!!!!! This video was a great help.... Thanks
VERNON SLATER JR thanks for watching and commenting
Good job klowny...forgot to take out the engine and trans too....lol
I know right lol thanks for watching and commenting and don't forget to subscribe
Absolutely awesome video! I am in process of building my 72 Camaro dash by 3d modelling and printing and AC would be nice addition.. the old AC has still some parts, but most is gone when former owned did a LS1 swap. Also the fans have now no power and so on.. so new AC would be great.. I am so happy I saw this video, because answered so many questions I had! Only problem I might have is the new engine and how to fit the new AC to it. If yo have any tips or info on that, please share!
Solid video. I’ll probably be doing the same shortly to avoid trying to make the old stuff work. Only question is how loud is the blower fan since it’s now inside the car?
Not loud at all..dont forget to subscribe..thanks
Great job brother I've done three they are a nice system 👍🏻👍🏻 Cheers 🍺🍺
thanks man..i love these systems!!
On your radiator what did you use to plug the port that's not being used? I have a champion radiator on the way.
Great video! Really helped me get my system installed. One question though, do you know the part number for that top radiator hose? Thanks!
I've removed my ac box before and never once have I had to cut the box to remove it. If your not going to use it ever again ok I don't see a problem with it but I just think it can be a waste though because it still looks usable.
Steve The Man thanks for watching and commenting
klowny1969 I'm being a hatter but good luck with your project and hope it turned out the way you wanted it to.
Steve The Man its all good..it was a customers car..check out my channel for a ton more 2nd gen vids
Klowney ur a beast my man!
Thank u sir
Really enjoyed this thanks
Glad i was able to help..dont forget to subscribe
This an excellent video!!!! 🙌🏾
Thank u..don't forget to subscribe 😉
Thanks for this vid- nice job- helped me out alot-cheers!!
Thank u..dont forget to subscribe 😉
Very awesome video thanks for your time
nice video..did you get the kit for factory AC camaro? did the kit come with the lap vents or was that extra?
wow that's great ty sir you and your videos r great u have a lot of knowledge
Bobby Salazar thank u
Where did you get that PS pump bracket? Mine is factory and interferes with the vintage air compressor bracket.
Great video!
you are the man manny great work you sir rock
lol thank you
I had a battery jump out of it's cradle into the Power wires to the compressor and after I fixed the cut wires that the battery cut the compressor wont turn on and I can't see a in line fuse anywhere to the light blue wire that go to the dry, could you give me a good guess what may have shorted out ? I had a man install it and he went out of business. PS... I did how ever run a power wire to the compressor via a toggle switch, is that a bad idea ?
This video is so helpful. Almost got my system completely installed baby! One question...is a two groove power steering pulley required or can you make it work with one groove and just route the compressor belt straight to the crank and bypass the PS puley? My PS setup just has a single groove - already ordered the 3-groove crankshaft pulley.
Job done...blowing ice cold baby! Thanks again for this...never would have tried on my own without this video. Took me a couple of months solo ops. Learned a lot in the process. Two groove PS pulley is 100% needed in addition to 3 groove crank pulley for any of those wondering.
Great video man! I have a 1975 Camaro and the guy that I bought it from removed everything for the AC away from under the hood. I was wondering would it be cheaper to just buy the compressor and condenser from autozone since I still have the ac switches on the inside of the car?
Personally I like vintage air because it cleans up the firewall alot..as far as price, you will have to price out the parts u need vs the vintage air unit..thanks for watching
klowny1969 thanks man
Outstanding video
Thanks for watching and commenting
What a great video. Intuitive and to the point. Liked and new subscribe from me. I’ll be wanting to do this in near future when I start my interior work on my 1980 z28 Camaro. Thanks bro!
Thank you so much!
Great Video just a little curious about how much silicone was used? I like 3M Strip Caulk personally
dont remember..just make sure u put a good size bead around it thats all
Has anyone restored the original AC on a 2nd gen camaro? I won't try to do the dash work, but think your video is great.
Great video. Having just installed a vintage air unit in a Factory5 Daytona coupe, I recognized a lot of the bits and pieces... but how did you keep your hands so clean?
im a pre-madonna :)
Ur an amazing car guy i thank you for the info.. Klown.
thank you
Great Video!!!!! I have not watched any of your other videos, but I'd have to guess you do a great job on all of them by this one. What did the entire system cost?
Thank you sir..i don't remember this was a while back for a customer..prices should be on vintageair.com
Nice work! just in time
Thanks for watching..dont forget to subscribe and hit that bell
GREAT VIDEO THANK YOU BRO!!!! YOU DO GREAT WORK!!!!!!
Thank you..dont forget to subscribe 😉
Was just considering this system, did the lap vents come with the kit? Good job!
Paul Bouchier thanks..no the customer bought them himself
nice work want to put one of these systems in my 68 Chevelle but it wasnt a AC car is that ok
yeah thats fine
Hey my brother I'm doing the same install right now. I know it's been awhile but can you tell me about how many feet of heater hose you needed to do this install. Thank you very much
Hey..I really dont remember..I just take a measuring tape and estimate..thanks for watching
18 feet for this install he says ..
How has it worked so far? Any issues with it? Thanks for showing the install you got great vids.
Thanks..it's a great system
fantastic video bro.
chris lawrence thank u
Notice you have nice headers on that thing. How is it for ground clearance since you lowered it 2 inches? I remember mine was pretty low with a stock suspension back in the day, I couldn't imagine it lower.
Not my car. .but i think it had long tubes and he swaped them for shorties
klowny1969 I would imagine... I think I’d have to go with the hooker shorties if I dropped it. How much of a difference is the drop on that thing as far as handling and performance?
Jay0321 car does handle better..the suspension geometry is a little off..u can tell when u make a turn and it doesn't return to the straight position by itself..drop spindles would be better..other than that it handles nicely
Sweet, thinking of a hotchkiss suspension and subframe or equivalent for a better price.
Jay0321 hotchkis is good
What kit did you buy? I’m not sure which one I need. I have the same exact Camaro
I think I mentioned in the video..you can also ask vintage air themselves for the kit that fits your car..don't forget to subscribe
What a bad ass video! Thanks
Mike Morgan thanks for watching and commenting
Mike Morgan what's the typical cost of this job
Great Video!
Peter Egger thank u
Dam that inner fender well came off easy. You must have let those bolts soak in wd40 cause always at least one j-nut ends up breaking! Lol
Classic Ride Society nope..no soaking lol
Then you got lucky. I'm never that lucky 😟
Very nicelly done...
thank you
Nice, I like it. Question, why not just leave the stock ac?
Rockwell Berber it cleans up the firewall nicely..and its newer, less likely to leak and stuff
Where do you buy the kit?