3D Printed RC TANK - Will This SURVIVE?
ฝัง
- เผยแพร่เมื่อ 18 มี.ค. 2021
- Building RC tank was a bigger project when I was first thinking of but all the effort pays off, it turns out amazing. If u wanna build this on your own, u can use this video for step by step tutorial. All files for 3D printing u find at Thangs.com (link below).
CHAIN VIDEO: • 3D Printed CHAIN - PLA...
________________________________________________________________________________________
MY PATREON PAGE: / letsprintyt
________________________________________________________________________________________
Files for 3D printing: thangs.com/Lets-Print/RC-TANK...
Stuff to buy:
775 DC motor: ali.ski/D-fmz
Square nuts (M4x8x2): ali.ski/A1Sym
M4 setscrews: ali.ski/WMx6dL
Flysky transmitter + reciver: www.banggood.com/custlink/vKG...
Battery: www.banggood.com/custlink/mm3...
________________________________________________________________________________________
Music & Templates from Motionarray.com
________________________________________________________________________________________
Storage box on my table: cults3d.com/en/3d-model/gadge...
Name sign on my table: • 3D Printed Name Sign W...
Facebook: www. letsprintyoutube
Instagram: / letsprintyoutube
Thank u for sponsoring this video, Thangs.com - วิทยาศาสตร์และเทคโนโลยี
Excellent work. Keep up the comedy, it's the best part.
I replaced shit, with shit. 🤣
Next week: how to print a clutch
Good idea
Indeed
Next year: how to print a tesla
„Ichanged that sh*t to this sh*t“ - hilarious...and so much me! 😂
The amount of testing, research and patience in this video is insane!
One thing I've noticed about tanks is they are longer than they are wide and their center of mass is generally set between the upper travel of the tracks. Something to consider for a potential future attempt.
For a snowtank you need wide Tracks and gaps between each link
I also recommend to Lock at Tracks from Snowcats
Best 3D print channel on YT.
Maybe time to get the CR-30 PrintMill !
That's really cool
Great project!
Great job!
excellent work, keep up the good work. This was obviously a big project
Great project! Congrats!
I would love to see the tank V2 ! Maybe you can try to put the mechanism and the gearbox under the tank so the center of gravity is lower and maybe try to make it a bit faster ! Great video btw thanks :)
Great ingenuity !
It is realy too cool
and good 👍👍
Good to know about the PETG and the cold.
Mr.Tank approved
I wonder if some sort of suspension would have helped with the track breakage? In all fairness, tracks are also the most failure-prone and maintenance-intensive part of real tanks.
I'm really very impressed by your gear boxes. I just built a large rc boat(85cm) and am really wanting to build a tank. Very inspiring channel
Great job!!!!!! Great video!!
"I changed this shit to the same shit and now we can do some shit" 😂😂😂😂😂
Good. Looks like monsters
Oh, I can relate to those feelings when see my tank move for the first time🙃
That was cool, keep doing your videos, i really like them, greetings from mexico
Nice job! Greetings from Latvia!
Nice work
Would you consider channel mixing for steering ? Then you could have gas on left stick and steering on right. A bit more controllable.
worth printing the tracks with flexible filament?
All this needs is an auto-loading 7.62x39mm cannon ;)
Just a few improvement ideas - enlongate your tank and make it thinner.
It means redesigning your gear box, but this will make working over terrain alot easier... I'm sure lining the gearbox with the skirt will be pretty compact and look very nice.
Also try to limit how many items you have underneath the tank. With an elongated body you should be able to support a platform about 2/3rds of the way up the wheel and encase everything to protect it but also add a bit of weight to give it better traction... Just try not to make it too tall... Slim is always better.
Perhaps putting both motors back to back on the rear of the tank and an encased lateral gearbox alongside the tank treads would be best.
me encantan tu canal, saludos desde argentina.
See oli täiesti hämmastav, pidin tegema ühe, et oma väike lennuk angaari sisse ja välja lükata
I love your passion for 3d printing. I wiuld go another step and try to 3dprint the shafts as well, and screws, and motors 😂 It doesnt work... Excellent job as always!! 😂👍
9:48 - highlight of the video
Nice
Are the esc senored or senor less because senorless dont like to be used for crawling they burn up that way used crawler esc and motors good job....
Homemade fun. 😎🚲
Love how you burn an esc in every single video ;)
Thats a nice project, i made one too on my channel, my suggestion is, make the gearbox to turn the tracks directly, without the chain, and make the track longer
If you want insane torque out of a 775 you should check the planetary drive out of openrc Trial truck :)
But! Nicely done.
👍
nice
You could scale that up and use it as some kinda funky hoverboard haha
What you call siudeskirt is not present on tanks.
As tanks have suspension holding their wheels, they are not rigidly attached to the chassis of the tank.
One improvement would be to make the gearbox in such a way that you don't need the printed chains, instead use gears to transmit torque to the tracks. Second would be to make the tracks wider as said by somebody in the comments. And to improve stability (a little bit maybe cuz it's still plastic after all) is to make the track sprockets heavier, instead of attaching extra weight to the body itself. But in the end this is still good because I know how time consuming and mental consuming stuff like this can get.
What size are the bearings for the gears?
Every time i hear "SpAaaaaaacers" i think of Ivan Miranda :D
V2 ..next
For the V2, tank designers figured out that the tank should be about 2 to 1.75 times longer than the width of the vehicle. The more wide the tank is, the easier it is to turn. But less stable it is, both in the forward direction (flipping end over end like yours) and less stable in the yaw direction (the vehicle would tend to wander to one side or the other while trying to drive in a straight line). If you make it more narrow, there's better grip with the ground and theoretically better speed, but it will turn like a pig.
Poggies
I like your idea , i think the tqank needs to be longer so it cannot tip over.
Love to estonia from turkey
Why not print tracks in tpu?
where are you from? that uniq mix with russian and indian acsen. never herd it before/
Hi, try to make air pump for car's tires
😁
your inglish is very good
Can you please give a run through of your settings on your controller, I’m trying to do this and my controller won’t work
Is 3d print filament cheap in Estonia?
Well, 1kg PLA and ABS are usually around 15-25euro. Yeah, cheap.
The lubrication should be on teeth itself, for shafts you should use bearings. Also please don't hit the bearings with hammer like this. Use rubber mallet with larger surface area or some kind of block. You are going to fuck up those bearings sooner or later.
would you be interested in doing a collaborative project, if we combined forces in fusion i think we could make something really cool.
if your interested i would love to model a working rc ussr SU-5-1
Just going by your channel name and how well stuff on this channel has traditionally worked... Would the combination have stuff working better or even worse? :)
@@Qwarzz no idea, he has more experience with mechanical printed gears, and although i bet their not the best representation of what he can do, i do have a lot of experience in designing wacky vehicles. the su-5-1 has very thin tracks maybe best use another as a template.
ps: look better fail better
9:49 life in a nutshell :)
It seems a bit too short for this height and width.
Yes, this is the reason why this tank doesn't wanna stay up.
Have you got a Patreon account? This is great stuff and I would sponsor.
Not yet, but the near future probably will! ;) Thanks!!
You funny 🤣
I think your tank is a bit out of balance. The center of mass should be much lower. But then again maybe it was a little better with the weight container.
Reminds me of a Russian tank...particularly when it was on fire...
come on i thought you will do it as a snow blower that would be great
i love how over complicated it is.
You need to make it a bit longer and a bit more rugged... and add a lawnchair to the top.
Tangi raam on liiga lühike.
NN lumekassidel on laiad roomikud.
soovitan 3x laiemad roomikud ja 2x pikem kere . siis peaks su lume tank toimima lumel.
Where are the SPACERS????
Changed this shit with the same shit 😂😂😂😂👌....
It is ok if your bad at english, we understand you clearly.
Hei, kas said Ryobi sponsoriks?
Kahjuks ei ole veel! :D
10:41 accidental face reveal
needs a wheelie bar it seems
There are reasons why tanks are taller than wider :)
@03:00 That Layer Line orientation looks _horrible_ for what you're using the part for... With the Screws acting as reinforcing Pins anyway you'd have fared better 3D printing them standing upright so each layer would have formed a continuous loop around both screws in each link - If you then add some sacrificial 45° geometry below the overhangs acting as built-in support you could have 3D printed them without Slicer generated Support and would have had an easier time snipping those built-in Supports away with sharp Side Cutters. Also print time is highly Printer specific.
@04:00 Side Skirts are more of a protection thing - Not a structural part like in your tank so a more appropriate description would either be a Running Gear Assembly or Running Gear Pod akin to how the *Milrem **_THeMIS_* System works - Which I'm _highly_ suspecting to be the inspiration for this project 🤔
@06:10 I don't want to _split_ hairs but man... I think those 3D printed Parts look like they would have benefitted from either being made out of wood like the top or 3D printed flat 😏
@06:31 A bit more complicated but doing a tank with just one Motor driving both the actual driving axles _and_ an input shaft for a differential steering gearbox controlled by a Servo switching it either into either one or the other direction via Slip Rings would also be possible 😁
Да сколько можно бить молотком по подшипникам!? Нет болванки алюминия, распечатай брусок для забивания подшипников!
threw body screw holes
belt fed sling gun, like a coil gun
i see no canon
For God's sake, do not strike the nuts into the plastic! Heat them lightly and they will lodge themselves naturally (I pronounce this in spanish accent: NATURRALLYY) into the part 😂
Everyone who hate a buzzing sound of ESC's like this comment
I've been trying hard for more than a week to contact you
Please enable me to communicate with you ....I left a message for you on your Facebook account.....Thank you very much
Man, please never hit bearings with a hammer again, especially the inner ring, it's basically cutting the live time of it by at least 80%
Small russian kids hands)))
Estonian
Какой же поганый английский.
Great job!