I saved so much money on the widows operating system on my new PC build. You inspired me to build it myself and I just got everything activated and ready to go. Got the code within minutes. Thank you Ed, a man of the people
Hey Edgar, your videos are awesome and super helpful, not only that they're entertaining also! Thanks legend! wishing you all the best and keep up with the amazing content!
The challenge with fans in the bottom is the dust and/or the clearance for exhaust. Though many people place their computers on the desk or side table, there are still users that place them on a carpet surface and not think twice about that consequence.
Ive been talking to my mom about your youtube channel and how your videos helped me build my first pc and uhhh.... This is the first video i watched with her and the intro was.... Something else
with a reg psu u could have put the cables in the front of the power supply ran them right to the managment channel and put an exhaust fan above the psu to pull some heat off the back of the motherboard. i tried that with this case and it works like a charm
Just a tip for screws. Why not using proper magnetic bit holders (and bits) from company like Wera? They magnets are so strong you will never drop screw no matter what you are doing... Simple and faster solution than always using screw holder...
Love the build. Glad I can finally start watching your videos again especially after being in bootcamp. Gives me inspiration for my next build once I gather enough money or have a place to live by myself.
No, its actually very bad for the AIO. The pump should always be below the top of the tubes. Otherwise air bubbles can travel up to your pump and ruin its life.
im currently watching u on my intel celeron laptop haha u give me so much ideas for pc builds if i ever get the money im trying to save lol. Love your videos edgar please keep uploading :)
Very informative video, Lian Li did a great job with the case/AIO (program), great job on the build man, hope you're having a great week, great video....... 😎
Damn another nice build and it would look good in white as well. I built my all white build with a gigabyte aero oc 4090/ 7800x3d/ 4 white sticks of 16 gigs of corsair vengeance ddr5 ram for a total of 64 gigs of ddr5 and the phanteks nv7 case. The pc is gorgeous and I cant wait to see how much of an improvement the 5090 and the next x3d amd chips are going to be once they release.
the cable of the aio coolercan can be put mid going to the right of the motherboard. it would be much cleaner can be on the same way with the 24 pin. it would be much cleaner.
Dude, you could have pulled the whole motherboard tray out with two screws instead of undoing 9. Also, when you moved the motherboard tray into the low position, you didn't add the extra grommets.
Would love to see you do an ALL black stealthy ATX build (with minor complementary rgb) in the Lian Li o11 AIR MINI case. I'm kind of thinking about a build like this, since im having to move my setup to the living room, since i've just had a son who will be moving into my current office, to use as a bedroom. I'm also redoing my whole setup to be more of a minimal setup, with a 15,6'' portable monitor as my second display. Already bought another desk, that matches the tones more in the living room. (sorry for, if any grammar mistakes. English is not my first language)
Maybe you change it before the video ends, but if you're going exhaust on the AIO on the vertical spot, why not make the rear fans intake as well. I get it they are higher, not lower. but wouldn't a cross breeze be better than negative pressure, no matter which direction it's pushing it. you'd match the flow of the other side of the case and create positive pressure.
That's a very good build,,, I watched it fully and everyday you just give me new ideas,,, i currently don't have a pc but I'll surely get one for myself soon
A bit skeptical with the three way glass case, but this build slowly wining me over, was worried for the temps but its actually good, another dope build not gonna lie.... Would have loved to see the gpu in vertical mode but horizontal is also good.
Video idea: pc build only with parts that have Black Friday deals. Love your vids!
ปีที่แล้ว
If you lead those cables from CPU cooler to the side instead (below ram) then it won't be that visible as it will be mostly hidden by pipes and MB power cables. That will allow you to put motherboard down again and keep a good look.
It's a shame you mounted the radiator flipped, the tubes at the top will give problems. Here's my major point for this good looking case, can you mount a liquid cooler so the tubes are at the bottom? The GPU seems to be in the way. Can you for instance go around the GPU, is the tube long enough or can you fit a 2 radiator at the rear with tubes at the bottom? Thank you for looking into this!
Thank you for the video, this is what i neded. and ive decided, for my first gaming pc, im going to go with Liam-Li Fans/Cooling and their Case. this look very chill. except im going to go with the infinity fans. The GA II is awesome too. Im going to buy my new PC VERRRRRY soon! currently looking at the RTX 4070 Super.
6 หลายเดือนก่อน +1
This man has won in life, work with something he really loves, all job is fun, and sudenly his life partner just come from nowhere just to kiss him.
My next build, just gonna buy a 15 gallon aquarium to build in, only need to add some cheap stamped steel trim and I'll have a case all the kids will want. 😂😮
i Love your build Ed is just looks" կատարյալ "Perfect,,, The case look really good i thinking of getting that beauty case for my AM5 AMD build that am going to build,, hope soon by next year january but yeah men GGs god bless you and family
Slick case, btw isn't that "latch" thing been on Asus motherboard for a good while now? I seen Lian Li recommendation with 2 exhausted at the back, intake on side and bottom.
Gorgeous case and build as always. One concern I have is that you said in the previous video is that you hate RAM slots that are not filled...so why leave RAM slots open in the most stunning case ever? IK you said it was for a stable overclock, but im still confused. Would love to have you reply on this comment to tell my why. Love the vids and looking forward to the next❤❤😊
Because 4-Slot boards are far worse on memory stability. You answered yourself already. Its basically luck on getting XMP to run with 4 slots filled because of the memory controller. XMP is an overclock, thats why.
i have a good suggestion i know your channel is based on tech but you like to game i think you should either make a gaming channel or just record on your main one i would love to see that😁
i totally do that shit too with the screws and how many times i've lost the damn screw to the ssd thing. we both geeked out when it snapped into place lol
Sweet build! Love the look of it and the differences from the O11D Evo
I saved so much money on the widows operating system on my new PC build. You inspired me to build it myself and I just got everything activated and ready to go. Got the code within minutes. Thank you Ed, a man of the people
I feel homeless after watching this
I feel so confident buying this case because of this video, very clear and in depth
Did you build it?
I have one and I highly recommend.
I don't have the money to build my own PC but just watching you build a gaming PC make me happy enough. It is my dream to have my own gaming PC setup
Hope you get one soon 🙏
Epic build video!
I really enjoy black builds more than the white, so I appreciate you going black again
You needa make another Black Friday deals video like last year
Yes, and fast. I just got another month's pay and it's shuddering with anticipation of which store it's gonna belong to next.
I’m sure he will. Not all companies have came out with their deals yet though
Its not black friday yet bro
I concur
@@ultramasterultra5724 In the EU it's not uncommon to have some bullshit called Black Week, or Black Month. It's bullshit, but it's the same shit.
Thank you for providing the chart at 15:14 , Very useful.
Hey Edgar, your videos are awesome and super helpful, not only that they're entertaining also!
Thanks legend! wishing you all the best and keep up with the amazing content!
the glaze is crazy
Lian Li Hit it out the park again. Awesome build
The challenge with fans in the bottom is the dust and/or the clearance for exhaust. Though many people place their computers on the desk or side table, there are still users that place them on a carpet surface and not think twice about that consequence.
Carpet is a killer … at least some hard base underneath the case …
The wifey kiss was the best part of this video 😊
1:45 best moment of the video no cap
Bruh
Ive been talking to my mom about your youtube channel and how your videos helped me build my first pc and uhhh.... This is the first video i watched with her and the intro was.... Something else
😂😂
I got mine this month and it is incredible. I highly recommend it for those trying to make a beast of a PC.
How is the airflow for you? And how many Fans u got?
Im looking to do my first build and fell inlove with this. just ordered everything. wish me luck.
have u built it yet bro? how is itt
Was getting ready to watch someone else do a build with this case, then bam. My man comes through with the ménage à trois of cases. Great vid
Looks great! Just can't wait for the O11D Evo RGB.
Sharp case from Lian Li. Loving all these new dual chamber options.
Those sliding holding bits have been around for like 20years or more. Handy little things.
I can only imagine having such a beauty of a pc
Just a tip: Start those screws with your fingers or normal magnetic screwdriver to minimize the chance of cross threading or stripping the threads.
with a reg psu u could have put the cables in the front of the power supply ran them right to the managment channel and put an exhaust fan above the psu to pull some heat off the back of the motherboard. i tried that with this case and it works like a charm
Was that your sister
Wife😂
You did not lol..
Bro what the fuckkkkk
Sweet home Alabama
Wtf
Just a tip for screws. Why not using proper magnetic bit holders (and bits) from company like Wera? They magnets are so strong you will never drop screw no matter what you are doing... Simple and faster solution than always using screw holder...
having a regular O11 and built in it, one of the best looking PC cases and crazy easy to build in, the amount you can customize them too is crazy
Definitely came together in the end. Bravo!
Finally someone did the perfect fan orientation
positive pressure is GOOD. Less dust intake on non filtered entries.
Ed really getting freaky with his builds now
best intro ever😍😍
LOL love his excitement on the tool bit holder that has been around for like 20 years.
Love your videos man i been watching you for over 4 years now i remember when you visited my friend to give him a PC, Keep it up!
Love the build. Glad I can finally start watching your videos again especially after being in bootcamp. Gives me inspiration for my next build once I gather enough money or have a place to live by myself.
Always been a dream of mine to build a custom PC , continuing to work hard! As for now i enjoy window shopping your channel 💪💪💪
I can’t wait for mine to arrive and rest of my pieces 7800x3d 7900xtx liability vision first full build no more shifty prebuilts gl me
In liquid cooling, smoother operation will be achieved if the pump is at the bottom and the radiator is at the top.
13:21 i was one of those who comented about the fans and u replied to me😊🔥💪🏻
I’m going to build my first pc soon and maybe i‘ll go with this case thank you for the vid
Damn that's an amazing build. I'm excited to see more
Would it be possible to put an aio pump radiator at the back where you put the two fans??
Hey Edgar! Your fan here from Nigeria!! I love u mehn… ur tech vids are so cool
Hmmm, I am not a pro, but shouldnt be AIO radiator other way around?(I mean hoses at botoom)
No, its actually very bad for the AIO. The pump should always be below the top of the tubes. Otherwise air bubbles can travel up to your pump and ruin its life.
@@roarbahamut9866as long as any part of the radiator is above the pump it will not get destroyed by air bubbles.
I just got the same motherboard...The no screw, latch system is by far the coolest thing about this Mobo.
Another amazing build great efforts Ed 🌹
This is my dream case at this point
i enjoy watching your videos and i really enjoy learning about computers. keep doing what your doing. your teaching young minds to do great things!!!!
I just finished my first pc build and it was the o11 vision! Amazing!! Thanks for the great info!
I would love to see your build!! I just did mine too last week
@@HannahVillarin-vf7rt I’ll post it up on my yt page.
How did you orient your fans? Did you do it the same as he did in the vid? I’m just worried there isn’t enough intake.
@@stank4950 how you did it?
im currently watching u on my intel celeron laptop haha u give me so much ideas for pc builds if i ever get the money im trying to save lol. Love your videos edgar please keep uploading :)
Very informative video, Lian Li did a great job with the case/AIO (program), great job on the build man, hope you're having a great week, great video....... 😎
your wife and you are so adorable!
My favorite part in this video is the Motherboard❤
i can only wish i had a build as clean as this
I do love dragon flutes!
Damn another nice build and it would look good in white as well. I built my all white build with a gigabyte aero oc 4090/ 7800x3d/ 4 white sticks of 16 gigs of corsair vengeance ddr5 ram for a total of 64 gigs of ddr5 and the phanteks nv7 case. The pc is gorgeous and I cant wait to see how much of an improvement the 5090 and the next x3d amd chips are going to be once they release.
I’m building a Ryzen 9 5900x build I know it’s kinda old at this point but it’s more affordable now and still a beast
Ed is stuffing it into our faces that he´s happily married AND has a 4090 T.T bro have some mercy please.
Many were happily married till they purchased the 4090! 😂
incredible job man as always!
let's go amazing build keep the videos coming.
Finally. Someone answered the 4090 question. I know the dynamic doesn’t fit.
the cable of the aio coolercan can be put mid going to the right of the motherboard. it would be much cleaner can be on the same way with the 24 pin. it would be much cleaner.
Dude, you could have pulled the whole motherboard tray out with two screws instead of undoing 9.
Also, when you moved the motherboard tray into the low position, you didn't add the extra grommets.
This build is sick. I'm still a console caveman. But this gave me some good inspiration for my build!
Would love to see you do an ALL black stealthy ATX build (with minor complementary rgb) in the Lian Li o11 AIR MINI case. I'm kind of thinking about a build like this, since im having to move my setup to the living room, since i've just had a son who will be moving into my current office, to use as a bedroom. I'm also redoing my whole setup to be more of a minimal setup, with a 15,6'' portable monitor as my second display. Already bought another desk, that matches the tones more in the living room. (sorry for, if any grammar mistakes. English is not my first language)
Maybe you change it before the video ends, but if you're going exhaust on the AIO on the vertical spot, why not make the rear fans intake as well. I get it they are higher, not lower. but wouldn't a cross breeze be better than negative pressure, no matter which direction it's pushing it. you'd match the flow of the other side of the case and create positive pressure.
Bro I literally started crying the way this PC is a beauty
This is a crazy build!! thanks for doing these reviews and making everyone happy. i hope at some point i can get a case like this. have a good day!
That's a very good build,,, I watched it fully and everyday you just give me new ideas,,, i currently don't have a pc but I'll surely get one for myself soon
A bit skeptical with the three way glass case, but this build slowly wining me over, was worried for the temps but its actually good, another dope build not gonna lie.... Would have loved to see the gpu in vertical mode but horizontal is also good.
I wish for Christmas all of us can get a powerful pc that can play any game or whatever you do
Lian Li suggests 6 intake and 1 exhaust (or 2 exhaust if you use the lower setup)
Wonderful build and excellent case! Keep it up!
Video idea: pc build only with parts that have Black Friday deals. Love your vids!
If you lead those cables from CPU cooler to the side instead (below ram) then it won't be that visible as it will be mostly hidden by pipes and MB power cables. That will allow you to put motherboard down again and keep a good look.
I would absolutely love to get this build done. looks like i need to save some pennies and start buying bit by bit
Whatching your vids just makes it's feels like a have a PC when ever am watching you I hallucinate bout what am Gon do with the PC when I get it 😂😂😂😂
Sweeeet build thanks to you i bought the case and built a pc bec it looked soo good
Love it. Super clean
Awesome case just subbed! What was that banging tune called when you showed of the pc?
I pretty much copied this build. Thank you for the inspiration my dude
It's a shame you mounted the radiator flipped, the tubes at the top will give problems. Here's my major point for this good looking case, can you mount a liquid cooler so the tubes are at the bottom? The GPU seems to be in the way. Can you for instance go around the GPU, is the tube long enough or can you fit a 2 radiator at the rear with tubes at the bottom? Thank you for looking into this!
Tubes at the top last 3+ yrs. No issues...🤷🏽♂️
@roelgarcia2894 sound issues I mean
lian li seriously awesome with those face blow fan. that kinda fan design been delayed for too long
Thank you for the video, this is what i neded. and ive decided, for my first gaming pc, im going to go with Liam-Li Fans/Cooling and their Case. this look very chill. except im going to go with the infinity fans. The GA II is awesome too. Im going to buy my new PC VERRRRRY soon! currently looking at the RTX 4070 Super.
This man has won in life, work with something he really loves, all job is fun, and sudenly his life partner just come from nowhere just to kiss him.
Yo tech source I have really been needing a new set up because my current set up is only a Nintendo Switch.
I love your content btw🎉🎉🎉
My next build, just gonna buy a 15 gallon aquarium to build in, only need to add some cheap stamped steel trim and I'll have a case all the kids will want. 😂😮
Love the video! keep up the good work Edgar
that intro was crazy 😂
Edit: I do that with screws too sometimes, not even gonna lie
Nah Edgar your a freak with these intros my man love your videos keep making awesome content 😂
love the videos!!
Why didn't you put links to other parts? I really like this build and I am trying to build it myself
shouldn't your AIO technically be flipped to avoid air bubble building up getting sucked into the pump?
That's a beautiful build...
i Love your build Ed is just looks" կատարյալ "Perfect,,, The case look really good i thinking of getting that beauty case for my AM5 AMD build that am going to build,, hope soon by next year january but yeah men GGs god bless you and family
Slick case, btw isn't that "latch" thing been on Asus motherboard for a good while now? I seen Lian Li recommendation with 2 exhausted at the back, intake on side and bottom.
Awesome build!
Gorgeous case and build as always. One concern I have is that you said in the previous video is that you hate RAM slots that are not filled...so why leave RAM slots open in the most stunning case ever?
IK you said it was for a stable overclock, but im still confused.
Would love to have you reply on this comment to tell my why.
Love the vids and looking forward to the next❤❤😊
Because 4-Slot boards are far worse on memory stability. You answered yourself already. Its basically luck on getting XMP to run with 4 slots filled because of the memory controller. XMP is an overclock, thats why.
@@PDXCustomPCSthanks for the responce and help
@@raynhardpalmer8571 No problem! 😁
15:13 killed me, wasn't expecting that 😂😂
i have a good suggestion i know your channel is based on tech but you like to game i think you should either make a gaming channel or just record on your main one i would love to see that😁
imagine watercooling this case that would be🔥
i totally do that shit too with the screws and how many times i've lost the damn screw to the ssd thing. we both geeked out when it snapped into place lol