Brake Pad Renewal - Nissan Micra K12

Step by step guide on how to remove and replace the front brake pads in a 2003 to 2010 Nissan Micra K12. Check out these other Micra K12 brake service videos:
Brake Disc Renewal - • Brake Disc Renewal - N...
Caliper Pin Lubrication - • Brake Caliper Slide Pi...
Thanks for watching. Please comment, like and subscribe !.
~~~~ Part Links ~~~~
As an Amazon Associate I earn from qualifying purchases.
🛠️ Brake Pads - amzn.to/3cHLgW7
🛠️ Spanner Set - amzn.to/3RhQR4a
🛠️ Ryobi Impact Wrench - amzn.to/3RgR6wB
🛠️ Socket Set - amzn.to/3TEvZWt
🛠️ Trolley Jack - amzn.to/3Q9QmIl
🛠️ Axle Stands - amzn.to/3B9douy
🛠️ Wire Brushes - amzn.to/3qt14PP
🛠️ Work Gloves - amzn.to/3wROsW0
🛠️ Copper Grease - amzn.to/3eiYdG8
🛠️ Brake Cleaning Spray - amzn.to/3QgRFVU
🛠️ Nylon Sleeved Impact Sockets - amzn.to/3QhCFqJ
🛠️ Thread Locker - amzn.to/3Rz0HOX
🛠️ S-Hooks - amzn.to/3CVXRzq
🛠️ Piston Reset Tool - amzn.to/3AJJVpH
Disclaimer: Screwsnutsandbolts is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.co.uk
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2022
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.

[@rc4211]

A very nicely done video! Very good camera angles and lighting; it was very easy to see what do were doing and to follow along. I have found that it's often easier to clean the rust and debris from the caliper mounting brackets if you remove them from the steering knuckle first. The rotor is out of the way, and it's easy to use a square file or caliper file to remove the rust. Applying a good brake parts grease to the mounting bracket under the abutment clips will also help to slow the accumulation of new rust. Lastly, it's also a good idea to always remove, clean, inspect, and relubricate the caliper slide pins with a silicone-based grease during a brake job. Sticky or frozen slide pins are a primary reason for uneven brake wear and reduced brake pad life.

[@screwsnutsandbolts]

Thanks for the comments. I'm doing the slide pin lubrication as a separate video.

[@roreesk]

i love that there’s no music on this video

[@philsimpson3556]

Nice video. Would like to have seen how the discs are replaced as well.

[@Majima487]

i did my mums pads on her 2009 micra an i wish i saw this video first :) i know how to change pads and rotors but i hadnt for many years so this would of been a fantastic refresher :), this guy reminds me of the channel Odd Tinkering, no speech just getting on with it :) (Y)

[@darrylbeddington533]

Very informative and easy to follow video. I shall crack on replacing mine tomorrow.

[@screwsnutsandbolts]

Thanks for watching !

[@de51gnz]

Nice step by step guide. Thanks this one is in my saved playlists!!!

[@screwsnutsandbolts]

Thanks for watching ! 👍

[@footballpopak]

very clear, good video to understand the brake system

[@screwsnutsandbolts]

Thank you !

[@chandrakantindapurkar8738]

Good video to watch for beginners
Thanks a lot

[@screwsnutsandbolts]

You're very welcome :)

[@markwilliams2830]

Brilliant ! One of the best guides I've viewed and a good refresher.I recently changed the pads and CV boots om my K11 with the help of one of your older videos.

[@screwsnutsandbolts]

Thank you very much 👍👍

[@MrRon148]

Very well explained . Keep it up .

[@screwsnutsandbolts]

Thank you !

[@antoniosocorro6841]

Awesome. Thank you so much.

[@screwsnutsandbolts]

You're very welcome! 👍

[@aatonhernandez3561]

Thank you so much,

[@screwsnutsandbolts]

You are welcome!

[@Oh-Jay52]

Ive got a large old warn pad reset screwdriver to just pry the pads apart before removal , suitably adorned in copious anounts of duct tape for disc protection ,
I'm a Northern tight arse and hate fiddly tools but hey , thats me, Nice to see the K12 getting more love !!!
Is it a project car as it seems to have been sat a while with those Spidey Webs ?
Thanks for this , Loving the series of service videos @ScrewsNutsAndBolts ! 👍

[@screwsnutsandbolts]

Thank you !. Yes the car was sitting up for about 3 years before I bought it 👍

[@mrBdoesntshare]

Tnx.

[@screwsnutsandbolts]

You're welcome !

[@abidmaqbool8834]

Great video will you be doing one on how to change the break fluid on the micra.

[@screwsnutsandbolts]

Thanks, I might be in the future

[@SPEXWISE]

Nice. I think I'll just do it myself although I haven't got one of those tools that presses the piston back in. Is there something else that can do the job?

[@screwsnutsandbolts]

Thanks. If it's the front brakes you could use this method: th-cam.com/video/E6iso9mVi8g/w-d-xo.html

[@screwsnutsandbolts]

If it's the rear brakes, the pistons need to be rotated as they're pushed in

[@SPEXWISE]

@@screwsnutsandbolts yeah already watched a few of your vids cos I have a micra with a couple interior issues as well as the front brakes need replacing. Thank you they've been super helpful

[@tonymessiha]

Are you able to advise on how to inspect front and rear pads and when they require replacement, please?

[@carlberg6918]

good vid ... as i mainly work on motorcycle, i always use brake cleaner on the pistons ,and give them a good clean also is this advisable in this situation on a car

[@screwsnutsandbolts]

Thanks. I would certainly advise that if the brakes are very dirty

[@limamantapachitas]

Lubrication of the pins of the calipier with silicone also

[@dcdc128]

hi, put new brake pads in, its touch the brake disc? but it should not touch, it grinds always.

[@screwsnutsandbolts]

Is the backing plate rubbing off the disc ?. It could have been bent slightly when you were taking the wheel off. Check this video: th-cam.com/video/uwIZTwFoI0U/w-d-xo.html

[@Rezasoltani-yf9ii]

🎉🎉

[@screwsnutsandbolts]

Thank you !

[@Rezasoltani-yf9ii]

👌👌🙏

[@screwsnutsandbolts]

Thanks !

[@TinoMiller]

Where did you buy the brake pads from ?? Can't find them on Amazon

[@screwsnutsandbolts]

There's a link in the video description

[@shantanusingh8535]

🙂

[@screwsnutsandbolts]

Thanks

[@philsimpson3556]

Nice video. Would like to have seen how the discs are replaced as well.

[@screwsnutsandbolts]

I did those in a separate video: th-cam.com/video/VcryLHkgVeQ/w-d-xo.html