Waterbox Tank Build Part 4

แชร์
ฝัง
  • เผยแพร่เมื่อ 17 เม.ย. 2024
  • Surprised to find the included plumbing on a tank this expensive to be so noisy. How I silenced my loud Waterbox 190.5 overflow.
    #saltyroots #saltwater #saltwateraquarium #reef #reefing #reefkeeping #coral #fish #fishtank #aquarium #DIY #waterbox #waterboxaquariums

ความคิดเห็น • 15

  • @allennewland9749
    @allennewland9749 6 วันที่ผ่านมา

    Excellent video!! I'm going to do the exact same thing on my WB 150.4 just to remove the "tricking" from the OF teeth. I also just noticed something else, the e-drain is a bit too close to these OF teeth letting some water "spray" up into the top of the e-drain. Your HACK will solve both problems and allow a trickle of the e-drain to not drop so far (due to the 45's) and decrease those sounds too. Well done :)

    • @Saltyrootsjax
      @Saltyrootsjax  6 วันที่ผ่านมา +1

      Thank you and good luck!

  • @queencityreefs
    @queencityreefs 19 วันที่ผ่านมา +1

    👏👏👏👏👌✌️

  • @cesarsreef5156
    @cesarsreef5156 17 วันที่ผ่านมา +1

    Where did you find the extenders?? If you don't mind sharing the source

    • @Saltyrootsjax
      @Saltyrootsjax  16 วันที่ผ่านมา

      These are the pieces I used: a.co/d/iITq322

  • @CJSAQUARIUMS
    @CJSAQUARIUMS 21 วันที่ผ่านมา +1

    May still wanna let water trickle down that emergency drain.. otherwise you will get surface scrim buildup on the overflow.. a trickle shouldn’t make too much noise. Nice work stuff like this are lessons worth sharing for people starting their build off 🫡🤝🏾

  • @MikeLemming
    @MikeLemming 22 วันที่ผ่านมา

    I wish my tank was silent like this! I plumbed it myself and with a slightly older mp40’s, there’s quite a bit of noise..

  • @philbert3866
    @philbert3866 6 วันที่ผ่านมา +1

    Is it still skimming surface good?

    • @Saltyrootsjax
      @Saltyrootsjax  6 วันที่ผ่านมา

      So far so good. No oil slick look at the surface.

  • @martinkester3501
    @martinkester3501 22 วันที่ผ่านมา

    Those are 40mm 45’s right?

    • @Saltyrootsjax
      @Saltyrootsjax  21 วันที่ผ่านมา +1

      Correct. These - a.co/d/9SNIs7m

    • @martinkester3501
      @martinkester3501 21 วันที่ผ่านมา

      What return pump are you using? I have same tank but peninsula the 6025 and I have been trying to quiet things down and have 3 areas creating noise 1 the return overflow weirs which after watching your video I ordered the fittings, so that will resolve that #2 the weirs in sump going from refugium to protein skimmer chamber, they water fall slightly at 600gph making a trickle noise, and 3 return pump sicce sdc 9 makes a pretty noticeable hum? Wondering if you have sump noise and what return pump are you using and how loud is it?

    • @Saltyrootsjax
      @Saltyrootsjax  21 วันที่ผ่านมา

      @@martinkester3501 I run the Maxspect Jump series on this tank. It’s turned way down but it’s virtually silent. Here is a link to them: www.maxspect.com/en/jump-series/602-mj-dc-pump.html
      I also use these pads under pumps, skimmers, etc and they definitely help with the humming noise: a.co/d/38C7Fsz

    • @philbert3866
      @philbert3866 6 วันที่ผ่านมา

      Is it still skimming surface ok?