Build A Smart Dolly Vehicle Combine Mini Crane | Tips to Build Rotate Crane
ฝัง
- เผยแพร่เมื่อ 24 มิ.ย. 2021
- Dear Everybody,
Today I would like to introduce How to Build A Dolly Vehicle Combine Mini Crane.
It could rotate 360 degree and lifts up to 200 kgs.
About my welder, you can refer this one: bit.ly/3zRuNUY
They have many sale of at here: bit.ly/3h4Abh2
Hot Seller Rankings 2021 bit.ly/3jxvLkn
Tools & Electronics bit.ly/3AfGi9Z
VIP Exclusive Zone bit.ly/365SQTr
I hope you feel interested in my video.
Please like, share and subscribe my channel to see more videos.
Thank you so much!
Fawa Bros.
#fawabros #dolly #crane #forklift
I think that is good enough to win the Noble peace prize for fabrication
Many thanks for your compliment!
Va
VERY NICE BUILD!
You could add one or two fold out outriggers with feet you could lower on the side where the crane mounts. This way you can prevent the cart from tipping over if the load is too much for the crane side and if you have to unload on the crane side. Love the locking brake on the front wheel, excellent idea!
Many thanks for your advise!
U⁷788i
Ç
Lp
Sfj
Very interesting build, I would have put Akerman geometry on the steering so the wheels turn correctly relative to each other, the rest I would build as you did. One thing in your use of the crane, never choke your lifting wire, always use a strop, (you could make a box to sit underneath to hold strops and chains), choking the wire damages it and can cause it to fail eventually, stay safe so we can watch your future builds.
Many thanks for your useful opinions!
Agree about the steering. I didn't know about the wire, thanks for the advice I'll keep that in mind. Cheers.
Э
Хэхэ
De fajin lett.
Obriga Fawa Bros, idéia genial e excelente demonstração. Mas, por favor, me diga que aparelho de solda você utilizou?
Огонь. Шикарная работа. Мастеру браво и респект. 🔥🔥🔥👍👍👍👋👋👋🤝🤝🤝
Thank you so much!
@@fawabros 1111
Эта перемычка 100 кг не весит , всегда такие руками ставили в проём , а эти поднять не хотят . И как он собрался на этой телеге по стройки ездить . Тот кто не строил - тому шикарно . На стройке когда перемычки ставят - ровных стяжек ещё нет , а все перемычки лежат на улице рядом с плитами перекрытия , их надо в здание по ступеням занести , на ровный пол положить( которого ещё нет ) , потом на улицу вынести , и краном положить , ну или как всегда руками , лучше верёвкой и вчетвером , по 50 кг на человека нормально , значит перемычку на 200 кг ложат руками.
скок епли чтоб жб столбик погрузить. я бы уже его давно сам унес в одиночку )))
You are really an expert.
Thank you!
Вдвоем перенесли бы этот столбик без тележки. А тележка мощная.
You're too strong!
Excelente trabajo muy útil gracias por compartirlo 💯💯💪🏽💪🏽 saludos desde Argentina 🇦🇷
Welcome and thank you!
ZARZA
Hola me gustan sus ideas para poner a trabajar el cerebro un saludo desde Iztacalco cd de México felicidades
Thank you and welcome!
I want one of these, for absolutely no reason!
I don't sell. Sorry!
Ótimo carrinho para levantar e transportar cargas. Um desses iria bem na minha oficina, quando eu montá-la.
Abraços!
Thank you!
Op pp klllllpo99oo7. Iiiiii
Muito top sua fabricação parabéns
Thank you so much!
Looks great. One small point... Ackerman angles on your tie rod ends. Will make the cart steer better.
Many thanks for your advise!
Absolutely brilliant build! Very impressed with the final result!
Thank you so much!
Manteppppp mas bro sangat bermanfaat sekali....
Semangat dan sukses selalu mas bro
Salam sukses dari kalbar mas bro
My grandson would love that, nice job..
Thank you!
Тачка огонь получилась!
Maravilhoso!
I'd like to know what the 486 people know that I don't know. This is brilliant. Thanks for sharing.
Thank you so much!
Gostei, Muito bom esse pequeno guincho!
Thank bro!
78à1
thông minh và sáng tạo,cảm ơn anh
Thanks!
just three words... center of gravity
It's very useful to lift and transfer heavy things like hard metallic in the corner
Yes, sir!
It lacks some extendable supports to avoid tipping due to displacement of the center of gravity. The cranes have four extendable arms that increase the safe surface of the load movement. I would have put the crane in the middle just above the front axle.
You could have designed the same car without so much height to the ground (it is not necessary to lift the load so much to move it). For the rest, this is very good. Congratulations for being so creative.
Many thanks for your opinions!
So what gives a given vehicle its strength? Is it the gwv or the materials used as the reinforcements to support such a load?
Lets say we have a typical car, say panda @ 3,800. 4banger 220hp, 200pf, how much could this said vehicle pull or lift with a prefabed harden steel bracket modified at some point where the unibody frame is structurally sound?
I ask because you seem to be knowledgeable about crane tolerances, booms, lifts, ECT.
Im trying to understand these tolerances that are sometimes given for safety, but can probably exceed there limits if reinforced by fabricated brackets like a winch plate or something chemically engineered to flex, bushings/ spring loads that withstand major forces & remain intact.
👍
👍
Күшті
Buena idea y bonito trabajo gracias por enceñarlos estos bonitos trabajos e ideas gracias 🇨🇱👍👍👍👍
You are welcome!
Measurements would be great
you have wonderful hands and brains, creating useful products, looking forward to interacting with you, thanks
Thank you so much!
Thank you so much!
Very nice❤🙏
Thanks!
Классный манипулятор получился.🔥🔥🔥🔥🔥
I don't understnad your opinions!
Rất thích,Hoàn toàn tuyệt vời xây dựng! Rất ấn tượng với kết quả cuối cùng!👍
Thanks!
tài nghệ của anh thật là tuyệt vời
สุดยอดเลยครับ
the woo wow song is driving me insane
Sorry!
tôi học được ở anh rất nhiều,cảm ơn Anh
Thanks!
Хороший подъёмный кран
Thank you so much!
Que excelente trabajo !!!!! mis saludos desde Argentina 👏👏👏
Thank you and welcome!
Você é um Gênio!!!
Thank you!
Great build. I would suggest you change the direction of the cable clamps on your winch cable. "never saddle a dead horse" Edit: That said, the way they were installed will certainly hold the amount of weight your rig can lift. It's just good practice in general.
Many thanks for your suggestions!
Never saddle a dead horse. Your the 3rd person I've heard say that in all my life. Milwright? That's how I was taught by my uncle when I was young.
@@mikeznel6048 Hi Mike, It's a great saying, isn't it? I just got my 40-year pin as a Union Ironworker.
Very creative idea thanks for sharing this new friend
Thank you so much!
Exelente presentación felicitaciones y gracias por la enseñanza.
You are welcome!
Love this build. Very satisfying to watch it being created. Wondering if there could be an issue with the wagon tipping up onto 2 side wheels?
Thank you!
Of course, look at 27:20 and see him hold the crane side down with a foot on the brace. Next "improvement" would be outriggers.
Тю блин,я такую бордюру вручную вдвоём с бабкой на кравчучку погрузил и вёз по ушатаной грунтовке😂
Muito bom projeto, caprichado, útil. Valeu pela postagem, parabéns! Saúde, paz e sucesso, Deus o abençoe!!!!!
Thank you so much!
Awesome work 👍, I wish I could be that inventive.
You can do better than me. Come on!
Nice build
Детям поиграться во дворе пойдет. Для стройки вещь непрактичная. Очень медленная. Можно гидравлику дополнить каким нибудь насосом высокого давления, что бы спуск и подъем стрелы был без резких скачков, плавным.
Да получилось круто.
Отличный ролик.
Авторы на славу заморочились
лайкос за сторания
😎👍
Thanks!
Very great one, i wish you could show us one that is powered with an engine and a driver's seat
Many thanks for your suggestions! Let’s me think and improve it!
Brilliant work!
Many thanks!
Parabéns pelo vídeo
Tu tem disponibilidade desse projeto detalhado? Goistei muito
Thank you so much! I show all materials list and measurements in video.
Great video. Really appreciate it when you speed up the repetitive work. Great idea and I'll bet you will wear it out from using it so much.
Many thanks for your advise!
Super brother 💪 I make in try.please square pipe inches
Me asombra la técnica y la facilidad con que aplica la soldadura de argón tig hojala y diera una cátedra en la aplicación de sueldar un abrazo fuerte de su amigo saludos de Iztacalco Cd de México gracias
Solo escondo el polo negativo del soldador. Puede consultar los parámetros de esta máquina de soldar: bit.ly/3zRuNUY
Show de bola Parabéns.
Thank you so much!
That was a way to build I just built a little ATV cart for my thing but I tried to use as much scrap as possible I didn't have to buy the hubs and tires so but using mostly bed frames from habitat store the angle iron it's not the strongest but you can weld it into channel and all kinds of stuff
Great job! Guys th-cam.com/video/dNG0R6cOJ9o/w-d-xo.html
Nice idea!
Я тоже хочу такую тележку на дачу 😭
❤Thank you❤❤❤❤❤❤❤
If you build one it will drive you insane for falling over. You don’t need a rear axel bar, so make it so you back it around the load, like an engine hoist. You lift the weight up within the wheelbase, throw a couple of planks under and lower it back down. I know this because my home made mobile garden crane is an unstable beast. Useful, very useful, well worth the building, so make one like the one in this vid with a mod so that it is stable :o)
Many thanks for your opinions!
٠٠٠٠٠
Pretty neat invention.
Thank you so much!
Congratulações ❤😊🎉 Brasil 💚 💛
great work have you thought of putting a stand each side that can raise ansd lower like your mini crane boom, just to take any chance of it tipping with a heavy weight and extended jib, looking could fit on that middle brace strut , as said great work
Thanks for your opinions!
@@fawabros 👏
]
❤Super❤❤❤❤❤❤
Great job!
Thank you!
Nice job, it would be good to have a better turning circle.
Many thanks for your opinions!
Как тележка для хозяйства годится молодец.
с таким же успехом можно создать станок для чесания уха ))) эти 2 орла с лёгкостью могли не то, что погрузить ...донести эту балку до места или залить её в опалубку по месту.
@@alexgamp5364 А что вы хотели ? Слова "крутящий момент" не переводятся на местное наречие :)
Excelente.
Thank you so much!
I need one of these that I could pull behind my electric wheelchair. LOL 😆
:)
Two suggestions, add counterweight to the opposite side from the crane and add a u shared pieces in front of the main roller to keep the cable from jumping off. Otherwise an awesome build
Many thanks for your suggestions!
@@fawabros go u do ucuu FYI u UGC cut ouch uu cup uu CT
@@fawabros uuu TX ucu
@@fawabros Cu UGC uuu cuff you vhf uucu go uucucuuc u up uuuu UGC UFO ucuu FYI uucc uucc u UGC
MUITO BOM. VALEU.
Thank you. 150$ for it.
Wow
Very nice
Thank for shearing
You are welcome!
Hola "Genio". Excelente tu creación, y sobre todo para los que hacemos movimientos de cosas y nos tenemos que arreglar solos. Saludos de 🇦🇷. 👏👏👏👌👌👍😉
Muchas gracias por tu cumplido!
ü
Jhhnf
Meu amigo está de parabéns falo de São Paulo Brasil
Thank you so much! I love Brasil too.
This was a nice introduction video for making just about everything. The possibilities become endless when you have the acquired skills used in this video. I see it for more than it's worth👍 when I'm just getting into cutting, drilling, grinding, welding and painting.
Many thanks for your supporting!
super technique
Thanks!
Invenção iteligenti eu do valor.0brigado meu irmão.
الله غربله على هالفضاوه
Thank you!
Great job 2 T up , can you put wheel char motor to run by battery ? and brace bar support leg not to collab when you lift heavy stuff ,
ah good use of bandwidth, all that machine noise adds the essential dimension of reality that would otherwise deprive us of information... gee thanks.
Excellent 👍👍👍. Thanks for sharing
You are welcome!
Yes me
thanks you mate👋🇮🇩from indonesia
You should use nylock nuts to hold the pivot bolts. Nice work. You want to make one for me for say $50 ? Will you throw in shipping to Australia ? hehehe . . . just kidding :-)
Thank you!
Nice, a few little changes would make it great
Thank you!
كم انت رائع يامبدع..
Thank you so much!
Nice, but a cheap hand truck would work as well.
Many thanks for your compliment!
nice work well done. thanks
you are welcome!
If possible, give the size and details so that the audience can implement it
Gostei Fawa muito bom ,um abraço.
Thank you so much!
if you take a pipe with an inner diameter the same as the jack, and cut it in half and magnetize it, you can make stops for the jack at pre set heights.
Many thanks for your suggestions!
Great video congratulations
Thank you so much!
Looks amazing love this
Thank you so much!
Welcom 🌹❤
now can we add an electric drive, and an electric wince, and an actuator for extension?
Круто!!!,👏👏👏
Thank you!
Genial. Felicdades
Thank you so much!
MANTAP 👍👍👍
Thank you!
Muito bom! Inscrito aqui no Brasil... Very good!
Great job! Ingenious!
Thank you so much!
Buen diseño Felipe y gracias
You are welcome!