Nice video. This is probably the most popular modification out there. I recently did it to my 76 Sporty. It would be great to see a video demonstrating proper soldering technique on the wires you installed. This is an important step towards the reliability of the intsall, and many people could benefit from seeing it done properly. I know I could. Thanks
i just got your kit and a set of 12 inch z bar mini apes. i'm ganna have them put on this week. can't wait to see how the bike turns out when it's done!!!
Great video, I ordered a set of Burly 14" bars and cables everything went on fine except I installed the throttle cables and it seems like the return cable is on the wrong side of the switch housing and the throttle rolls toward the front. I did install the correct cable(s) to the right diameter of cable housing. Any info would be helpful Thanks
Question, I enstalled 16'' apes on an 04 sportster 1200 using same burly kit, matched all the wires back up kept everything neat and heat shrinked. but when i hooked it all back up and tried to test my lights nothing is working correctly? any thoughts? tips? Thanks,
Pull the face of the plug off to reveal the steel connectors inside. Each connector has a tab on it. A paperclip or other pointed tool can be used to push on the tab, this will release the connector and it can then be pulled out of the back of the plug (each wire has a connector and each has to be done individually). That help? If not, drop us a line using the contact info on our site TH-cam does not allow links within their comments) and we'll walk you though it.
about to put my order in at the end of the week. I got 10 inch Harley factory mini-apes. You guy's seem to have every componant needed for an full install where other brands miss this and that. I fucks with Burly though. oh also this weekend installing the slammer shocks for my 2003 883r. Fucking Burly!
I'm begging you start making kits with ABS brake lines for sportsters! I'm stuck with my work, was always dreaming about set of apes. cannot do anything!
Nice video. This is probably the most popular modification out there. I recently did it to my 76 Sporty. It would be great to see a video demonstrating proper soldering technique on the wires you installed. This is an important step towards the reliability of the intsall, and many people could benefit from seeing it done properly. I know I could. Thanks
i just got your kit and a set of 12 inch z bar mini apes. i'm ganna have them put on this week. can't wait to see how the bike turns out when it's done!!!
the bars look good just ordered a set of narrow bottom 16s for a dyna cant wait to get my shirt the dyna is gonna look kick ass
Loved the video thx. You guys need more videos
Great video, I ordered a set of Burly 14" bars and cables everything went on fine except I installed the throttle cables and it seems like the return cable is on the wrong side of the switch housing and the throttle rolls toward the front. I did install the correct cable(s) to the right diameter of cable housing. Any info would be helpful Thanks
Thanks! This video helped me out so much!!!
Do you need new handles or you can use the original one not sure I think you used the same but just want to be sure !
Thanks for the video !
Great video! Really helped!
Question, I enstalled 16'' apes on an 04 sportster 1200 using same burly kit, matched all the wires back up kept everything neat and heat shrinked. but when i hooked it all back up and tried to test my lights nothing is working correctly? any thoughts? tips? Thanks,
How did he get to the wiring and how did take it off??
is there a video on the riding position?
how do you pull out the wires from the wire connectors? Is there a special tool?
A small flat head or paper clip works.
Pull the face of the plug off to reveal the steel connectors inside. Each connector has a tab on it. A paperclip or other pointed tool can be used to push on the tab, this will release the connector and it can then be pulled out of the back of the plug (each wire has a connector and each has to be done individually). That help? If not, drop us a line using the contact info on our site TH-cam does not allow links within their comments) and we'll walk you though it.
Wish you made a cable kit for 1994 Softail Custom.
about to put my order in at the end of the week. I got 10 inch Harley factory mini-apes. You guy's seem to have every componant needed for an full install where other brands miss this and that. I fucks with Burly though. oh also this weekend installing the slammer shocks for my 2003 883r. Fucking Burly!
Apologize for the delay, just caught this question... The bars in the video are 12" Narrow Bottom Apes.
I'm begging you start making kits with ABS brake lines for sportsters! I'm stuck with my work, was always dreaming about set of apes. cannot do anything!
Thanks!
This video is lacking he just explains it like a stoner
cause he is
If you can't do this you shouldn't be riding
Lowlifebiker666 if you ride a sportser you should have your man card pulled
If you think riding a sportster requires your man card to be pulled, then you should have your man card pulled.