jason, just stumbled across your video, thanks so much for info, didn't have to deal with crappy background music,or 30min vid with a bunch of nonsense, thanks brother, happy riding
You just saved tons of people from headaches, broke parts, and god knows whatever else will happen when trying to figure out what you have done. Thank you!!
Thankyou for your video explaining how to remove those wires. Like yourself I couldn't find any video how to do this and have spent 2 days scratching my head on how it comes apart. Thankyou again.
Well you saved my husband a ton of headaches and myself cause it’s my bike he is working on. He would rather be doing anything else than putting on my new handlebars. Thank you very much
You are the only one out of thousands of videos that actually explained and showed this. I Did It!!!! I could give you a big smooch right now. Thank you thank you sir! 😘👏👏🙌🤘
1:58 into your video is what I wasn't aware of. I've been screwing with a similar under seat plug for over a week. Once you showed how the bottom of that connector comes apart, I was finally able to get the wire out of the plug. Thank you very much.
Thanks for this video Jason. I have 14” ape hangers and an extension kit for my sportster 1200 on the way to me so I will definitely be using your method here!
Holy crap man! I spent like 4 hours trying to figure out how that works I had my tank off handle bars off everything and I could not figure out how those wires pop off and I couldn’t find anything on that. Until I finally found your vid! I’m going to try again and replace my handle bars!
Legend mate. Im doing the exact same thing and i thought there is no way no one will have a video on youtube. I was wrong. Thank you mate saves me cutting wires 😂
Holy shit bro bless your soul. These connectors had me STRESSED trying to swap my T bars. Thank you so much brother I appreciate it more than you know! 🍻
I want to try and extend the wires on my new Rebel 1100 for the same reason; higher bars. Your video will help me a lot if I run into the same type of connections. Thanks a bunch.
I am so glad that I found your video I’ve been trying to get my wires out of these similar plugs in your video for probably an hour now did not find anything telling me about that white piece inside being a locking mechanism. Lol I watched your video watched it again as I did it on my plug wire came right out. I just wanted to tell you thank you so much for making the video because who knows how long it would’ve taken me to figure that out. Lol definitely gonna share this knowledge with other people
This was so helpful. I thought they wanted me to stick the extension in the plug it’s self. I was so confused as to why they would do that because it was so bulky. Never crossed my mind to take it apart lol
@jason byers -- You are my freakin` HERO! I have been dealing with faulty wiring on my 08 FXSTC. This video is a troubleshooting masterpiece. THANK YOU for sharing your knowledge with the rest of the two wheeled world. Amen, brother.
And off course I’ve found your video right at the moment I bolted and screwed my fucking Dyna back together after fiddling with this Deutsch connector for two evenings in a row. Lol! Thanks buddy. Gonna try it again soon and finally change my handlebars.
SHIT! I got so frustrated I took my harness to harley. They wouldnt show or tell me how to do it but were more than happy to charge me $70.00 to do it. That was 2 days ago before I found your video. Now im trying to get my harness though my new 12" meat hook apes.
There is a tool for removal of the wire connector pins from Molex connectors but they are rather expensive. I use a #1 paper clip in the small hole just above the connector pin. Then you will hear a click and the pin will come right out. Nice video. Thanks.
It's in the repair manual. There is actually special tool called "molex pin release tool" that you stick in that little hole on top of the pin hole in the front. But tiny screwdriver works too, or paper clip.
Excellent, but you don't need to disassemble the back of the connector, just lift the latch and insert a thin paper clip into the corresponding hole, and that's it, the wire is free. We have an extension brand in Brazil called Pandilla Cables, their kits include a tool and an instruction manual.
Dude. THANK YOU! Swapping bars on a 95 Dyna.. Same height and sweep, but going from Beach to Drag bars. (Wires Through the bars). Not rocket science, ...but brain surgery. Lol.. I swear, ...They almost engineer this stuff to drive one batshit. Anyway Cheers! Thanks again and Stay well out there!
There is a video that does show this exact thing but my problem is I can't get my plug to fasten back in all the way .. idk if my contacts are sticking out to far or what I did wrong but this was a pain in the ass .. its do able but it's a pain .. the best I can tell you is draw a diagram and take pictures of the wires and the plug
This is a Deutsch connector, there is specific tooling to assemble and disassemble one of them. Of course a small pick or flat blade driver will get the job done.
So putting the cables back on to it, do they just snap in? And do they have to be in the same order you took them out? I’m replacing my bars on my sportster cause someone hit it in a parking lot and it’s my first time ever doing bars with internal wiring.
Sorry for the late reply! Yes, be sure to take pictures of where the wires are...they need to be put back in the same order. Test it BEFORE you tie everything back up and screw the cover plates on. It's a hassle when you get two wires in the wrong spot! And yes, the wire heads snap back into the plastic piece inside the harness. Hope this helps, man!
jason, just stumbled across your video, thanks so much for info, didn't have to deal with crappy background music,or 30min vid with a bunch of nonsense, thanks brother, happy riding
You just saved tons of people from headaches, broke parts, and god knows whatever else will happen when trying to figure out what you have done. Thank you!!
You are an American hero buddy! Out here doing the Lord’s work!
DUDE! Thanks for doing this video. I needed a video like this because, as. you said, no one has done a vid like this. Great work man!
Thankyou for your video explaining how to remove those wires. Like yourself I couldn't find any video how to do this and have spent 2 days scratching my head on how it comes apart. Thankyou again.
I'm gonna try thanks. I've been looking all over for help and you're the only one I saw explaining this
Well you saved my husband a ton of headaches and myself cause it’s my bike he is working on. He would rather be doing anything else than putting on my new handlebars. Thank you very much
2 years later, man, THANK YOU!
You are the only one out of thousands of videos that actually explained and showed this. I Did It!!!! I could give you a big smooch right now. Thank you thank you sir! 😘👏👏🙌🤘
I also looked and looked and never found anything like this. Glad to help!!
I’ve been looking for this exact info for over 8 hours today. Great work !
Bro this is awesome still can’t find this anywhere else thank you!
1:58 into your video is what I wasn't aware of. I've been screwing with a similar under seat plug for over a week. Once you showed how the bottom of that connector comes apart, I was finally able to get the wire out of the plug. Thank you very much.
I'm HONORED that you commented!!! My friends and I swear by your safety vids. Thank you, sir!
Thanks for this video Jason. I have 14” ape hangers and an extension kit for my sportster 1200 on the way to me so I will definitely be using your method here!
you my friend are a legend i never would’ve figured this out
THANK YOU! I struggled for hours before I found your video.
I'm really surprised there's still not another video that explains this!!!
Duuuuude I’ve done my bars before and this was the worst part. I’m currently doing them again and this tip, my god, you are awesome. Thank you!
Holy crap man! I spent like 4 hours trying to figure out how that works I had my tank off handle bars off everything and I could not figure out how those wires pop off and I couldn’t find anything on that. Until I finally found your vid! I’m going to try again and replace my handle bars!
I tried this for 3 hours the other way with the holes. Your video is the only way that worked for me. Thank you so much
Legend mate. Im doing the exact same thing and i thought there is no way no one will have a video on youtube. I was wrong. Thank you mate saves me cutting wires 😂
OMG, this video is so helpful. I'm trying to make internal wiring for my sportster, and this info is just what I need. Thanks a lot, friend!
Thanks from Australia , I have the same extention kit and was lost until i saw this .
Been tryin to figure this out for two days! Thank you!!!
Best explanation on this i have seen yet...thanks.
You sir are the MAN! thanks
Thank you, you saved me a ton of time and explained it very well..
Holy shit bro bless your soul. These connectors had me STRESSED trying to swap my T bars. Thank you so much brother I appreciate it more than you know! 🍻
Great video thanks. Take a couple of photos of the wires and their locations before unplugging and disconnecting them.
You learn new things everyday, thank you for sharing 🤙🏼👍🏼
Thank you, your video saved me money and time. Great help.
I want to try and extend the wires on my new Rebel 1100 for the same reason; higher bars.
Your video will help me a lot if I run into the same type of connections.
Thanks a bunch.
Great job man and thanks for showing that on film!
You are the man. Thank you for this video. Just helped me big time.
I am so glad that I found your video I’ve been trying to get my wires out of these similar plugs in your video for probably an hour now did not find anything telling me about that white piece inside being a locking mechanism. Lol I watched your video watched it again as I did it on my plug wire came right out. I just wanted to tell you thank you so much for making the video because who knows how long it would’ve taken me to figure that out. Lol definitely gonna share this knowledge with other people
Hey brother. just want to give you big ups on the video very well done and very useful! Thanks!
My guy, you just saved me so much time and so many headaches. Thank you so much!
This was so helpful. I thought they wanted me to stick the extension in the plug it’s self. I was so confused as to why they would do that because it was so bulky. Never crossed my mind to take it apart lol
I know others who have cut the wires and that would have been disastrous for me! Glad it helped.
Thanks for that my friend that's really helped me out for one. UK Sportster owner.
This is The stuff youtube was made for thank you, and ride safe.
Fantastic video Jason, it was exactly the connector I have been working on, saved me a lot of headaches!
Just what I was lookin for. Thanks man
This helped me today!!!! Thanks, from High Plains Moto - Kansas
Glad it's still helping folks!!
Thank you soooo much. Nobody shows it like you!!
Thanks you!
I'm Japanese！
Thanks to you, I was able to remove the coupler!!!
Thank you so much！！！
@jason byers -- You are my freakin` HERO! I have been dealing with faulty wiring on my 08 FXSTC. This video is a troubleshooting masterpiece. THANK YOU for sharing your knowledge with the rest of the two wheeled world. Amen, brother.
I appreciate you...I've been doing a handlebar swap on my 2008 Nightster and couldn't figure it out. thanks!
Thank you so much man , exactly what I needed
Well that was just perfect, seen many videos doh this was the info I needed, thank you Sir !
Glad I could help!! Ride safe!
Thank you so friggin much man! This helped me big time!
Thank you brother! Absolute Legend!
Thank you, figuring those connections out without ruining them is a pain, thanks for sharing
Great video simple, detailed, and right to the point.
Thank for taking the time to put this together man. Big help.
Thank you, thank you I was going crazy trying to figure it out life saver.
This video is gold. Thanks man. Just the information I needed.
And off course I’ve found your video right at the moment I bolted and screwed my fucking Dyna back together after fiddling with this Deutsch connector for two evenings in a row. Lol! Thanks buddy. Gonna try it again soon and finally change my handlebars.
This was exactly what I needed. Thank you brother.
Genius!
Thanks for making this video.
SHIT! I got so frustrated I took my harness to harley. They wouldnt show or tell me how to do it but were more than happy to charge me $70.00 to do
it. That was 2 days ago before I found your video. Now im trying to get my harness though my new 12" meat hook apes.
That was me, bro...hopefully we can all keep learning together!!
Definitely helping me! Appreciate it! 🤜🏻🤛🏻
Thanks brother, great video helped out a ton.
There is a tool for removal of the wire connector pins from Molex connectors but they are rather expensive. I use a #1 paper clip in the small hole just above the connector pin. Then you will hear a click and the pin will come right out. Nice video. Thanks.
Thanks you for this. Was not familiar with this plug type. God Bless!
Thanks a ton buddy, God bless you!
Yes! Thanks! No idea how I would have figured this out alone.
thanks bro de-wiring is the most frustration thing
It's in the repair manual. There is actually special tool called "molex pin release tool" that you stick in that little hole on top of the pin hole in the front. But tiny screwdriver works too, or paper clip.
I hope we cross paths someday because I owe you a beer!
You just helped me on my 08 electraglide
Literally a life saver
Excellent, but you don't need to disassemble the back of the connector, just lift the latch and insert a thin paper clip into the corresponding hole, and that's it, the wire is free. We have an extension brand in Brazil called Pandilla Cables, their kits include a tool and an instruction manual.
Thanks for the tip!!
Not all heroes wear capes!
god bless ya Jason.
Dude god bless brother. Thank you so much.
You are the man! Thanks!
What a great video😀
big help bra thanks for the very helpful info
Really big help thank you !
God bless you man!
Badaboom badabang COME ON!!!! is right .. finally got those dam wires out
Unreal! Thanks so much!
Dude. THANK YOU! Swapping bars on a 95 Dyna.. Same height and sweep, but going from Beach to Drag bars. (Wires Through the bars). Not rocket science, ...but brain surgery. Lol.. I swear, ...They almost engineer this stuff to drive one batshit. Anyway Cheers! Thanks again and Stay well out there!
you mentioned the top with the little hole. well if you stick something in that small hole, it will release the wire
Greatly appreciate the info....
The best ! Thank you very very much!
Glad I could help!!
Solid vid!! Thanks
Your the man thanks a ton!!!
Absolutely awesome
Thank you my friend.
There is a video that does show this exact thing but my problem is I can't get my plug to fasten back in all the way .. idk if my contacts are sticking out to far or what I did wrong but this was a pain in the ass .. its do able but it's a pain .. the best I can tell you is draw a diagram and take pictures of the wires and the plug
Thank you. I’ve been struggling with mine
Thank you Jason
Thank you for the info
Thanks that helped a ton.
Thank you great presentation
Very nice! Thanks
This is a Deutsch connector, there is specific tooling to assemble and disassemble one of them. Of course a small pick or flat blade driver will get the job done.
So putting the cables back on to it, do they just snap in? And do they have to be in the same order you took them out? I’m replacing my bars on my sportster cause someone hit it in a parking lot and it’s my first time ever doing bars with internal wiring.
Sorry for the late reply! Yes, be sure to take pictures of where the wires are...they need to be put back in the same order. Test it BEFORE you tie everything back up and screw the cover plates on. It's a hassle when you get two wires in the wrong spot! And yes, the wire heads snap back into the plastic piece inside the harness. Hope this helps, man!
Good job bro
Thank you so much!
Damn right it help thanks!