Volvo xc90 t6 stuck door How to open a rear door that will not open
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- Quick how to on opening the rear doors of a Volvo XC90 when the lock fails to unlock and the door won't open at all.
I think I failed to mention to unhook the window from the regulator, pull the rubber plug in the center of the panel. Then move the window till you can see the clip that holds it onto the regulator. Push the clip and pull the window up.
The rear door panel has 2 screws in the center pull (remove the cover) and 3 7mm bolts behind the wood grain panel. To remove the panel, start on the large end with a plastic trim tool and pry the panel of the clips. The rear of the panel slides out once all clips are pulled out. Then the panel pulls straight up and off.
Thank you for watching my video. I hope you found it helpful and informative. If you did, please show your support by liking, subscribing, hitting the bell, and leaving a comment. Your feedback is very important to me and it helps me improve my content. If you want to support me even more, you can also donate to me through these links: ko-fi.com/diam...
paypal.me/DSMRevival
venmo.com/u/Fr...
Every donation is greatly appreciated and it allows me to continue making videos for you. Thank you for your generosity and kindness. Have a wonderful day!
Thanks for the video! I was able to unjam the deadlock through the speaker hole without taking out the whole assembly (only remove the panel and the speaker); try to use the other door’s deadlock location for reference and poke away
Good Info. Thanks. Same two back doors will not open.
I had the same issue on my 2017 XC90 but after been priced €850 from Volvo for a replacement door actuator I decided to investigate it myself. My rear door was completely dead locked from both inside and outside of the car but when I checked it out I found that the dead lock mechanism had become stuck and by using a small rod I could release it without completely dismantling the door panelling. After I released the dead lock mechanism I then greased it up and haven't had a issue since and that was over 1 year ago.
Same here, I didn't actually have to replace the latch after I got it unstuck it kept working ever since.
Hi!
How did you first get it to open when it was stuck from both inside and outside? I have the same problem with V90 rear door, if I get it to melt a little then it opens, but even with small freezing degrees I can't open the door.. I would like to try the same thing as you, would rather not open the whole door panel :D
Hey Thomas, can you confirm how/where you inserted the rod? Through the speaker? And were you using the rod to jiggle the white thing that is adjusted in this video? Thanks so much.
@@WillSmart-yr5ez Hi Will. The best way to access the dead lock mechanism is through the hole were the cable from the internal door hand cable runs through. With that said if you remove the internal speaker you can use the opening to put a light/torch in to light up the area around the door lock actuator so it's easier to see the moving parts. If you want to give me a email address I could send you pictures of the part of the actuator that needs to be released with the rod.
@@thomascullen1634hi! I’m also having the same issue, would you be able to send me the pictures too please😄
Great video, keep it up 🤝🏼
I’m having a similar issue one one of them(2017), but in my case the right, rear window and lock don’t work(checked the #33 20 amp. fuse, but is good).
Thanks for posting this. I just did this process last night. It was a BEAST. Took out speaker to get to those screws. How did you NOT have the window come down when you took they vertical bar/window raiser deal out? Do you have the window taped? How easy is the replacement of the mech? Just those three screws?
Thanks for posting this!
I had masking tape on it. I believe it's just those three screws, that's all I need to do to get it off the glass. If you need the procedure lmk, I can send a pdf.
@@DiamondStarWerks
Thank you for sharing this. I've just had the same issue. Should Volvo not recall and replace latch?
Not really as it's mainly an issue with trying to open the door while trying to unlock it. It's not a safety failure so it'll never hit recall
We were able to get rear drivers door open with your instruction. Doing passenger door but pushing on back of actuator and pulling door release is not working. Any thoughts on how to get lock to release?
I just did the passenger side rear based on this video and it worked.
Hey
I was looking into this and wondered if you could send me that pdf too
Thanks in advance
Do you know if the drivers front door panel will come off with the door closes?
Can you send me the pdf for the procedure? We were able to remove interior panel but now need to get the inner panel off but not sure how to tackle the window. Thank you!
Yes I'll get that for you soon
All the dent men praying he points the camera up in that door!
My sister is having the same issue with both rear doors in her XC90. After the fix, how do you prevent the same scenario from re-occuring? What is the cause? Does anybody know?
As far as I could tell it happens when someone (kids) tries to open the door at the same time someone is pressing the unlock button
Do you by a chance have a part number for the latch assembly that you needed to replace? I have everything off and the door open, but what to do next I don't know. If its super straightforward, I apologize, newbie here :)
Hy you finde the part ?I need to change asswell dor open but now I'm stuck in what to buy to make it back again
I actually didn't replace it. I was able to unstick and get it working without replacing anything. The latch just gets messed up normally when someone is trying to open the door at same time someone is trying to unlock it.
In this case kids trying to get out constantly pulling on the handle waiting for it to unlock.
@@simsauto I, unfortunately, had this replaced at the dealer. The p/n they used is 32310869. 2016 XC90 here.
@@DiamondStarWerks That is great! I haven't had a chance to get in there again, but last I was in there I was able to get the lock mechanism out but there was a cable it was stuck on (I think the exterior door handle) and I couldn't find the release for that to be able to take the part fully out and look for the jam or where to grease and what not. Did you take the lock mechanism out? Or did you grease/investigate with the part still in there?
I never took it out. There was a little white lever (I think I showed it somewhere in the video?) That I was able to move with my fingers that let the door unlock. I think it just gets stuck in the middle or something when someone tries to unlock the door at the same time someone pulls the handle.
After I got it to work by moving that piece it worked ever since and still is working today as far as I know. So I never had to remove it or replace it.
Got a 2018 here. Took of the outside handle for paint work.. Now the door wont open from in the inside or outside.. what can I do?
Just have to follow along the video and try to reach that latch. Normally the lock mechanism gets stuck like that. That's really the only way to access it when they door won't open
@@DiamondStarWerks I did Im pulling on the inside cable as well. Door wont open..
@@CrazyDuck4u have you tried to reach and move the little white lever I showed in the video? The cables aren't the issue, the lock is, moving that white tab was the only way I got it to open
Go to 2:15 in the video, press the white tab down and pull the cable
@@DiamondStarWerks this is where we are having issues, pushing on the white tab did not release while pulling the cable. Any thoughts?
After taking off 15 screws. I cant take off panel.
Pull the whole plastic panel downwards the glass window will slide down with it and the panel pops loose.