Pull behind mower

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 155

  • @vscolkitt
    @vscolkitt 4 หลายเดือนก่อน +1

    I have two Swisher 60” pull behind mowers (14.5 HP engines on each) and have been pulling them behind my 1026R John Deere (w/ 60 inch deck) for several years now. I overlap the Swisher Decks about 12 inches on either side of the J.D. deck for a 13 foot cut. I mow 13 acres in 2-1/2 hours, or 5.2 acre’s/hour. I’m using two ball hitches from the tractor to the trail mowers but cornering leaves uncut strips so I need to switch to a sleeve hitch’s so the trail mowers tongues can’t swivel. I have pulled the Swishers on either side of the tractor and also both to the right side of the tractor which does triple mulch the grass blades for much less grass remnants left behind. Great time savor! Great minds think alike! ha ha! I’ll have to upload my system to TH-cam!

    • @logboom2002
      @logboom2002  4 หลายเดือนก่อน

      @@vscolkitt
      Can wait to see it on TH-cam,please send me a notification when you do.

    • @logboom2002
      @logboom2002  4 หลายเดือนก่อน

      I mean cant wait

    • @vscolkitt
      @vscolkitt 4 หลายเดือนก่อน

      @@logboom2002
      I mowed 13 acres today with my two pull behind Swisher mowers. Two videos…. Titled….
      Two Pull Behind Swisher Mowers with John Deere tractor…Part One (and Part 2)

  • @MGszamanVlog
    @MGszamanVlog 5 ปีที่แล้ว

    Hi, can I use part of your video to my compilation homemade inventions and projects ?

    • @logboom2002
      @logboom2002  5 ปีที่แล้ว

      MGszaman Vlog
      No problem. Go ahead

    • @MGszamanVlog
      @MGszamanVlog 5 ปีที่แล้ว

      @@logboom2002 great Thank You

  • @kramnull8962
    @kramnull8962 6 ปีที่แล้ว +5

    Now you went and made me regret getting rid of my old mower, when I bought my new one. The only thing wrong with the old Troy-bilt was the trans-axle unit...

  • @SpynCycle57
    @SpynCycle57 4 ปีที่แล้ว +2

    Now that I have several acres to keep mowed, I'll start looking around for some old riding mowers to turn into pull behind mowers.

    • @logboom2002
      @logboom2002  4 ปีที่แล้ว +1

      Darrell Patton
      You wont regret it

  • @trreb1
    @trreb1 6 ปีที่แล้ว +1

    I've thought about doing this with push mowers but never with riders. That a great set up you have there Lucien. Well done.

  • @Bbendfender
    @Bbendfender 6 ปีที่แล้ว

    Great idea. My uncle used to pull an old push type lawn mower behind his rider.

    • @MC-hs4mf
      @MC-hs4mf 6 ปีที่แล้ว

      TeleWacker electric pto mowers cut so much better than push mowers and non electric pto mowers.

  • @Slugg-O
    @Slugg-O 6 ปีที่แล้ว +3

    I LIKE IT!
    What a great way to reuse old mowers and cut down on mowing time. Nice job.

  • @allenhunt3070
    @allenhunt3070 6 ปีที่แล้ว

    Fantastic idea and execution! I am now going to look for some used riding mowers!

  • @BuddingBassist93
    @BuddingBassist93 3 ปีที่แล้ว

    This video is a little nugget of gold, well done

  • @offical_noob8696
    @offical_noob8696 4 ปีที่แล้ว +1

    im late but, that diy pull behind is so sick!!! i really like how it has parts from other tractors (:

  • @rdaystrom4540
    @rdaystrom4540 6 ปีที่แล้ว +2

    Great job. Well done. Love your 🐕 dog.

  • @davidhenderson3400
    @davidhenderson3400 3 ปีที่แล้ว +1

    I know a man that has been mowing his yard for the last 3 years with a mower that has a bad transaxle.. He pulls it behind his ATV.

  • @petermulloy5740
    @petermulloy5740 9 หลายเดือนก่อน

    Great job!! But why don't you have the covers over the motors when they're running?

    • @logboom2002
      @logboom2002  9 หลายเดือนก่อน

      Petermullow.
      Why would i need to cover the moter? Dont have a spare hood

  • @MustangsTrainsMowers
    @MustangsTrainsMowers 5 ปีที่แล้ว

    I think it was the 1960’s that Cub Cadet sold a pull type mower along with a special rear hitch setup so you could pull two, just like your setup. Can you take another video showing the hitch system?
    About 14 years ago I got a free Snapper SPA520, 52” commercial walk behind mower minus the engine, plus I have three Snapper SPA360, 36” commercial walk behind mower decks and carrier frames. The SPA series have floating decks. The SPA520 I think I’m going to turn into a pull type mower.

    • @logboom2002
      @logboom2002  5 ปีที่แล้ว

      Boyd W
      Sorry Boyd but i took that hitch off. I am using just one pull behind mower now

    • @MustangsTrainsMowers
      @MustangsTrainsMowers 5 ปีที่แล้ว

      Ok.

  • @1ton4god
    @1ton4god 6 ปีที่แล้ว

    Lucien good job amazing. Love the fact that took somebody else's junk and created a product that is a huge blessing to you. It sounds like you're from another country. I am 3rd Generation polish and I can tell you this my grandfather my father with exact same way and I am too I'm hoping to pass it down to my child. There's too many people with too much money to waste on buying new things period and letting someone else do the thinking for them.

  • @Brandon68plus1
    @Brandon68plus1 4 ปีที่แล้ว +1

    Great job man I wish I had the skills and ingenuity to build something like that

  • @Peter-V_00
    @Peter-V_00 6 ปีที่แล้ว +1

    One word, BRILLIANT!

  • @had2galsinthebooth
    @had2galsinthebooth 6 ปีที่แล้ว +2

    A friend/neighbor did similar a while back using a gas push mower pulled behind his rider to mow about 2 acres. He just took the push handle off and built a bracket to keep it in position like you did only lighter duty. When I followed along on the 1.5 acre area adjacent to my place with my rider it was done very fast. I agree with mulching idea but not only for safety but also to make less work for the right side trailing mower. It has to cut it's own swathe plus recut the lead deck's discharge.

    • @logboom2002
      @logboom2002  6 ปีที่แล้ว

      oh just quit it
      I did tried it with 2 mower just that one time for the video. Usually i use just the lawn tractor plus the mower on
      the right so there is no problem of recutting the grass. But you got the right idea bout mukching
      I keep one pull mower as a spare
      thx for you comment

  • @paulc5790
    @paulc5790 6 ปีที่แล้ว +1

    This is awesome, I've been thinking about building one of these from a spare rider, and I really like this design. Great job!

    • @logboom2002
      @logboom2002  6 ปีที่แล้ว

      Paul C
      Thank,s Paul
      Work pretty good too.

  • @fred1382
    @fred1382 6 ปีที่แล้ว

    Why don't you have the discharge on opposite sides of the pull behinds?

  • @abwolfsto6039
    @abwolfsto6039 3 ปีที่แล้ว

    Nice job brotha that’s awesome

  • @jackburner8107
    @jackburner8107 6 ปีที่แล้ว +1

    Awesome rig.....nice skills you have

  • @jessedean2435
    @jessedean2435 ปีที่แล้ว

    That is an ingenious invention you should patent that idea!

  • @Mr5150Sarge
    @Mr5150Sarge 4 ปีที่แล้ว

    Great idea and great execution

  • @jessedean2435
    @jessedean2435 ปีที่แล้ว

    AWSOME WHERE ARE YOU LOCATED!

  • @lanksterprice
    @lanksterprice 6 ปีที่แล้ว

    I would put a guide bar on the front of the first of the driver so it will help with knowing where rear mower is at for your cut line or on on each side.

    • @logboom2002
      @logboom2002  6 ปีที่แล้ว

      Lankster Price
      I did think about that but i usually cut with only one “pull behind mower” so it cut to the left so i,m always all right i just align my lawn tractor on the last cut

  • @dvdsimp20
    @dvdsimp20 6 ปีที่แล้ว

    Some times people put the dummest stuff on TH-cam... sometimes you get gold like this video!! Absolutely awesome 👏🏻

  • @nickstosz6730
    @nickstosz6730 6 ปีที่แล้ว +1

    Wow, those look great. Well built too, I think you're on to something here.

  • @markw480
    @markw480 6 ปีที่แล้ว +1

    Brilliant I was thinking along the same lines !! Thanks for the video !!

    • @logboom2002
      @logboom2002  6 ปีที่แล้ว

      Mark W
      Thank,s Mark been using one for 3 or 4 yeas now so if it kunk out i have a spare one

  • @dannythetoesmasher
    @dannythetoesmasher 6 ปีที่แล้ว

    Any one of a video showing how to strip to an axle and replace with a straight shaft like he did?

  • @sarge27271
    @sarge27271 6 ปีที่แล้ว

    Lucien, tu petes le feu capitaine! Tu devais faire parti du "Club des debrouillards 50"! Felicitations. Belle machine. Lol
    Cheers

    • @logboom2002
      @logboom2002  6 ปีที่แล้ว

      sarge27271
      Merci Sarge

  • @danovido8946
    @danovido8946 6 ปีที่แล้ว +12

    Well done! Perhaps you can put a mulcher cover on the mower with the blades exposed for your safety! Just looking out for ya : )

    • @logboom2002
      @logboom2002  6 ปีที่แล้ว +3

      Dano Vido
      I could do that.Good idea Thank,s

    • @michaelmactavish1728
      @michaelmactavish1728 6 ปีที่แล้ว +1

      thats a huge lawn thats when i would need a 39hp kubota front mounted mower with 60'' or 72'' mower deck wich wouldnt take long mow it when it runs it's 28 miles anhour speed

    • @martianshoes
      @martianshoes 6 ปีที่แล้ว

      Not everyone, it other parts of the country...can, nor want to, "Mulch".
      Lawnmower's basic design is to cut and DISCHARGE grass...not make cole slaw out of fescue.

    • @danovido8946
      @danovido8946 6 ปีที่แล้ว

      martianshoes I was told to mulch to self fertilize the grass and it has made my lawn beautiful. It is a lot less messy and looks better than long clippings on the grass. I can also mow along curbs, borders, and cars without clippings all over the place. I have really loved it thus far!

    • @dbblackkaiser
      @dbblackkaiser 6 ปีที่แล้ว

      Dano Vido - I agree

  • @keya31gville
    @keya31gville 6 ปีที่แล้ว +3

    Where's the diy tutorial!! Wonderful work btw

  • @urja9
    @urja9 3 ปีที่แล้ว

    This is truely amazing my friend

  • @Chads6Strings
    @Chads6Strings 5 ปีที่แล้ว

    Sweet set up. Thanks for not putting any music in your video.

  • @deromealain
    @deromealain 6 ปีที่แล้ว

    Salut Lucien
    As tu trouve tes roues en avant

    • @logboom2002
      @logboom2002  6 ปีที่แล้ว

      Alain Derome
      Je ne comprend pas trop ta question
      Ce sont des roues de tracteur a gazon et si tu demandais pour les montures pivotantes je les ai construite moi meme
      J,espere que ça repond a ta question

    • @deromealain
      @deromealain 6 ปีที่แล้ว

      Ok Merci je pensais que tu avais acheter des roues swivel a part, j ai un vieux tracteur et j ai envie de faire pareil

  • @wpowerwagon
    @wpowerwagon 6 ปีที่แล้ว +1

    All 3 together cut very well good idea

  • @TDean-pu4hr
    @TDean-pu4hr 4 ปีที่แล้ว

    Great job!

  • @jamesedwards1528
    @jamesedwards1528 6 ปีที่แล้ว

    Wow what do you do with all that time you save

  • @jasonprashaw3916
    @jasonprashaw3916 ปีที่แล้ว

    That's a good idea to do with old lawn tractors

  • @charleswheatley3897
    @charleswheatley3897 6 ปีที่แล้ว

    Wonderful sir. Brings back fond memories.

  • @alanm3438
    @alanm3438 3 ปีที่แล้ว

    That is very creative. I guess you are serious about your grass cutting.

  • @MustangsTrainsMowers
    @MustangsTrainsMowers 4 ปีที่แล้ว

    Look for John Deere SST15 SST16 or SST18 zero turn tractors with a bad hydrostatic transmission. Remove seat, steering wheel and transaxles and sell those parts. Install axle and tires in the rear and build a hitch on the front. Bingo you have a pull type mower since they are made with front caster wheels.

  • @kansasadventure1831
    @kansasadventure1831 5 ปีที่แล้ว

    Awsome work!

  • @TheAussieincalgary
    @TheAussieincalgary 5 ปีที่แล้ว

    THAT IS BRILLIANT 😎

  • @johnperkins8895
    @johnperkins8895 5 ปีที่แล้ว

    Genius!
    Out of necessity comes invention

  • @johnchiurato7733
    @johnchiurato7733 5 ปีที่แล้ว +1

    Pure GENIUS!

  • @matthernandez43gunst86
    @matthernandez43gunst86 6 ปีที่แล้ว +2

    you need to attatch them to the right rear so you you blow the grass from one to the other to the other and leave a clean cut

    • @justinhendrickson1999
      @justinhendrickson1999 4 ปีที่แล้ว

      I thought about that too but then when youd go for your next pass youd have thrown down so much clippings on the uncut that i think it would either clog up or not cut right.

  • @yvesmorais4575
    @yvesmorais4575 7 ปีที่แล้ว +1

    Nice Job Brother!👍👍👍

  • @dalemasyk1583
    @dalemasyk1583 4 ปีที่แล้ว

    well..... im fckin speechless....this is the coolest , smartest thing you have created n woow how much you gain more ground...hmmm i guess its gonna be a millertime sooner then you think huh lolol

    • @logboom2002
      @logboom2002  4 ปีที่แล้ว

      Dale Masyk
      You,r right Dale
      I get to Miller much sooner with all the time i save

  • @MowersNBlowers
    @MowersNBlowers 6 ปีที่แล้ว +1

    That works really well!

  • @neolightproductions
    @neolightproductions 5 ปีที่แล้ว

    I’ve thought about this for behind my four wheeler. But I was just going to use a deck and weld a motor mount on top.

  • @Pro1er
    @Pro1er 6 ปีที่แล้ว

    Very nice but I would be concerned about burning out the transaxel on the towing mower.

    • @logboom2002
      @logboom2002  6 ปีที่แล้ว

      Pro1er
      on my 4 th year and nothing burn out yet

    • @Pro1er
      @Pro1er 6 ปีที่แล้ว

      Good to hear. Put some extra air pressure in the slave mowers to make them easier to roll.

  • @stevemcc4447
    @stevemcc4447 4 ปีที่แล้ว

    Awesome! Smart guy.

  • @jdjeep46
    @jdjeep46 4 ปีที่แล้ว

    Excellent job.

  • @davidstrickland6428
    @davidstrickland6428 5 ปีที่แล้ว

    Lucien, A great video, but moreso, great ingenuity (or is that engineuity ?) with the design, engineering, and fabrication. Just wondering, did you say you were going to "do something foolish" or you were going to "do something Polish?" haha Peace, j/k

  • @trinityacreshomestead4147
    @trinityacreshomestead4147 5 ปีที่แล้ว

    How has the transmission on the John Deere mower held up pulling the other mower? I worry about pulling mr DR 60” deck mower with a smaller yard mower like this?

    • @trinityacreshomestead4147
      @trinityacreshomestead4147 5 ปีที่แล้ว

      Pulling both mowers that is?

    • @logboom2002
      @logboom2002  5 ปีที่แล้ว +1

      JD Gray
      Usually i only pull one mower and no problem so far

    • @trinityacreshomestead4147
      @trinityacreshomestead4147 5 ปีที่แล้ว

      lucien morais Thanks...it would be nice to be able to add to my cutting width like you are. I’m currently pulling the mower offset with my Mule and it takes forever to mow 6 acres.

    • @trinityacreshomestead4147
      @trinityacreshomestead4147 5 ปีที่แล้ว

      What size engine is the john deere lead yard mower?

    • @logboom2002
      @logboom2002  5 ปีที่แล้ว

      I believe its a 12; HP

  • @JoshWeaverRC
    @JoshWeaverRC ปีที่แล้ว

    My hero!

  • @sneakapeek2577
    @sneakapeek2577 6 ปีที่แล้ว

    good job! ... why would anyone pick thumbs down? .. such achievement.

    • @logboom2002
      @logboom2002  6 ปีที่แล้ว

      sneak a peek
      Thank,s Man

  • @julies1ify
    @julies1ify 6 ปีที่แล้ว

    Great Job lucien morais ! Your doing all the work & your dog is panting, lol

  • @donaldswink6259
    @donaldswink6259 6 ปีที่แล้ว

    You my friend are one smart man, job well done.

  • @dudedrivesalac
    @dudedrivesalac 6 ปีที่แล้ว

    I love the invitation and the narration you have a great personality on video but a face for radio lol

  • @donaldwatson554
    @donaldwatson554 3 ปีที่แล้ว

    Well Done !

  • @scottrobello
    @scottrobello 6 ปีที่แล้ว

    Good idea but why not just get a mower with a larger cut width.

  • @Prometheus203
    @Prometheus203 6 ปีที่แล้ว

    Cool idea, all you need is a rod on each side of the front bumper so you can drive at the right distance without turning your head.

    • @logboom2002
      @logboom2002  6 ปีที่แล้ว

      Mark C.
      Very good idea Mark may be i could try it !It woul also give the right distance so you dont overlap your pass to much or too little

  • @circuscalipso
    @circuscalipso 3 ปีที่แล้ว

    Gute Idee!

  • @logboom2002
    @logboom2002  7 ปีที่แล้ว +1

    Thank,s Vince

  • @lowellmunz
    @lowellmunz 4 ปีที่แล้ว

    Very nice work, all my respect.

    • @logboom2002
      @logboom2002  4 ปีที่แล้ว

      Lowell Munz Thank,s Lowell

  • @TechDadOG
    @TechDadOG 4 ปีที่แล้ว

    @ 1:40 I was a little scared for those real G's only tan slide on's they almost got mulched up

  • @narlycat
    @narlycat 4 ปีที่แล้ว

    you think your yard would take too long to mow without the 2 extra mowers in tow? Imagine having to push mow a yard your size. I'd think a riding tractor alone would be heaven. And what is this your neighbor gives you a spare mower? This is the 2nd video today I've seen where neighbors give you free stuff. I'm lucky if my neighbors would give me the time of day.

  • @toyotacruzer7543
    @toyotacruzer7543 6 ปีที่แล้ว

    What if you need to raise deck

    • @logboom2002
      @logboom2002  6 ปีที่แล้ว

      Big Country
      I kept the same adjustment raising rod than before .On one mower you can even see the raisin arm

  • @jaredb6934
    @jaredb6934 6 ปีที่แล้ว

    That's awesome!!!!

  • @TheAirheaded1
    @TheAirheaded1 6 ปีที่แล้ว

    Great idea my friend...and I like you too! Cheers!

  • @saleemkader2126
    @saleemkader2126 2 ปีที่แล้ว

    What next i have seen them all man connecting 6 push mowers behind rideon. One video on youtube for someone to make that is pull behind behind wife with mower there will be millions of views.

  • @2naturesownplace
    @2naturesownplace 6 ปีที่แล้ว

    well done indeed!

  • @patrickbear7261
    @patrickbear7261 6 ปีที่แล้ว

    Great idea, i like it.

    • @logboom2002
      @logboom2002  6 ปีที่แล้ว +1

      Patric Bear
      Thank.s

  • @larrysnyder3475
    @larrysnyder3475 6 ปีที่แล้ว

    Very good job

  • @justruss6112
    @justruss6112 5 ปีที่แล้ว

    while heading to sturgis in 92, we was nearing the badlands and could see a big dust cloud far ahead....as we approached there was a ol timer and he had about 16 20 " inch mowers linked in a v pattern and was getting it done. maybe a cousin of yours , regardless a very smart man like yourself

  • @scottthomson700
    @scottthomson700 6 ปีที่แล้ว

    Nice work.

  • @Ozzypup1
    @Ozzypup1 6 ปีที่แล้ว

    Cool idea.

  • @FinanceMan
    @FinanceMan 4 ปีที่แล้ว

    You basically have a bush hog at that point haha

    • @logboom2002
      @logboom2002  4 ปีที่แล้ว

      N L
      You are right NL
      No chance to little tree to grow up lol

  • @inkelpascal7033
    @inkelpascal7033 6 ปีที่แล้ว

    sa coûte cher de gaz mieux le petit tracteur CUB CADET 382 CC comme j'ai plus économique= ?

  • @vincest.fabiano9909
    @vincest.fabiano9909 7 ปีที่แล้ว

    ...good work!!!!!!

  • @scottm101
    @scottm101 6 ปีที่แล้ว

    well done!

  • @robreyes8867
    @robreyes8867 6 ปีที่แล้ว

    Good job

    • @logboom2002
      @logboom2002  6 ปีที่แล้ว

      Rob Reyes
      Than,s Rob

  • @scottsoper
    @scottsoper 3 ปีที่แล้ว

    Absolutely fantastic!

  • @eman1757
    @eman1757 6 ปีที่แล้ว

    Cool dude.

  • @jcelldogs
    @jcelldogs 6 ปีที่แล้ว

    Da udder one lol

  • @tatopr23
    @tatopr23 ปีที่แล้ว

    Real nice

  • @jasperedwards3341
    @jasperedwards3341 6 ปีที่แล้ว

    big enough for sheeps

  • @juancbarahona7544
    @juancbarahona7544 ปีที่แล้ว

    Smart

  • @Vfh........y
    @Vfh........y 6 ปีที่แล้ว

    Great idea but I wonder how long the transmission will last in that mower. As they're not designed to pull any type of weight for an extended period of time. In my humble opinion

    • @logboom2002
      @logboom2002  6 ปีที่แล้ว

      Roger Lund
      Been using for at lest about 4 years if not 5 now and no problems
      but just one of them not pulling 2

    • @chrisreid5272
      @chrisreid5272 6 ปีที่แล้ว

      Where is this?

    • @logboom2002
      @logboom2002  6 ปีที่แล้ว

      Chris Reid
      Near Ottawa On.

    • @Ethan-ck6iz
      @Ethan-ck6iz 6 ปีที่แล้ว +2

      They do have hitches to I would say they are designed to take the stress of pulling a trailer of mulch or something

    • @Iamthathillbilly
      @Iamthathillbilly 6 ปีที่แล้ว

      Roger Lund my grandpa used his John Deere hydro matic or whatever it’s called as a tractor for many years, pulling a 28 foot tracker boat with it frequently, that was 8 years ago and the mower still drives now after a mountain of other abuses

  • @bmbott123
    @bmbott123 6 ปีที่แล้ว

    Great idea

  • @teddobosz7812
    @teddobosz7812 6 ปีที่แล้ว

    Don’t run over your dog!

  • @deznutz6986
    @deznutz6986 6 ปีที่แล้ว

    I just get a few guys on some atvs tell go make a track fuck that mowing

  • @ryanhamilton1188
    @ryanhamilton1188 6 ปีที่แล้ว

    beautiful

  • @0011clem
    @0011clem 6 ปีที่แล้ว

    its good. but all the time taken making up brackets and stuff , you could have been mowing the grass with the john deere .

  • @timr5174
    @timr5174 6 ปีที่แล้ว

    the money it would take for gas for 3 you could buy a belly mower and have a nice ass ride

  • @gateway8833
    @gateway8833 6 ปีที่แล้ว

    Great idea