Thank you for sharing, it really take POWER for professionals to admit when a mistake is done on the job. High 5 you went back to make it right⭐power move
I’ve been installing turf for 7 years now, I love it. Tbh with you there’s no need for an “S” seam when you know what you are doing and the quality of the turf is good. In my opinion, it’s just more waste of turf and labor. I don’t mean to tell you how to run your business but this is what I do for a living and I know that the faster you get these jobs out and the less you spend on labor the more money there is left in your pocket at the end of the day. You have 4 people doing one 12-13 ft seam. That could have easily be done by one or two persons while the other 2-3 stretch and nail the rest of the area. “S” seams maybe visible if not done correctly because you’re cutting through the fibers instead of in between them.Straight seams would be fine as long as you cut enough stitching off the sides first. If you look at the side ends of the turf when you first get it (the black ends you need to cut off in order to seam) the turf tends to go sideways because of how it’s made so you need to cut off at least 4-5 lines and then you can start seeing the fibers straightening up. Most of the time when you have a seam that “Mohawks” this is the reason why or it’s overlapped. I would also recommend using staples for the seam they allow you to spread or tighten up the seam as you do it. These are things not a lot of people know unless they do this right and everyday. I work all over Southern California let me know if you ever need some help my team can help yours grow.
i use the procutta seam tool. i have tried all ways. found out its much better and invisible seam 100% of the time. we use the procutta then handcut it in. it really quick once you master it. way faster and 100% of the time. sometime when you do straight seam, if the ground is not perfect flat you will have trouble. okay you guys know about zigzag seams? ill make video about that sometime.
@@enviouslawn1665 you’re correct about the leveling of the ground, if not leveled right straight seams maybe visible. If you’re good at what you do, you can get away with straight seams but in my opinion, the zig zag seams work the best, no expensive tool needed, no need to cut through fibers all straight cuts and less turf wasted. I try to minimize how much turf I waste as much as possible because those inches turn into sqft, sqft turn into dollars.
You don’t have to use that tool. As long as it’s cut in any wavy pattern, just cut the other side to it. Seams always hidden. Been doing that since 2018. I’m Jay Lopez in GOAT GANG 🐐🤟🏽
Oh man I've been there, unlike the one inch space you just mentioned on the gap we had the bottom touching exactly and the customer could see it slightly. I did the same thing, bought a new piece, cut the "S" line and the customer was happy. Total cost was only $1,600 thankfully and the guys got some work. Great result by the end but as mentioned yes it was costly.
The seam is very important, but you don't need the curvy tool. Cut the seam correcting straight works just as well. 3/8 is the separation you need between the 2 pieces of grass. It's not that hard! Biggest problem are the corrupt contractors out there. Sad part is there are more poor ones then good ones - they'll nickel and dime you to death.
I would also suggest getting some synlock and some seeming glue that way when you finish the seem and its done correctly that seem tape and glue will hold it in place guarantee
Am I understanding that is artificial grass over concrete? I ask cause I'm interested in same. But, how can it drain, so that materials of artificial grass is not siting in pools of water when it rains for days? Thank you
Let’s be realistic, the guys are not making $400😅. At most your only Spanish speakers are being paid $25 per hours and a full day of 8 hrs is $200 per guy. Cmon man😅
Great job i learn the most from my mistakes and keep growing thru failure. Not the best way for some seems to be working for me as I go mistake free for a few months at a time.
$400 charged to the customer. Thats with overhead markup. If he pays his guys $20/h and their working 10h+ days T is paying out $200 per guy per day off the bat.
More wave flies? 😭 So they used tetley nad and then used brain tangerine to cover the other nad to cover canada to deploy snoopy butt face plug to use on the bow altair to cover the terrible fan seep sea creature situation with the preganant witch situation then made the one sperm cell as ball tadpole frog chicken leg to cover the pregnant bump 😭
Blame it on the hands..smh I’m a landscape business owner. The difference between me and this guy is I’m out there cutting installing and getting dirty. If he cared that much about the job he would have been there and not just worried about his profit. I feel sorry for his clients and employees...
I watched another vid from a turf vendor. They say cut it straight and match the stitching gap so the seems don't show. Maybe that's harder said than done on long runs but those waves look like a bitch to seam.
Don't waste your time with it. Straight seems done correctly match the rest of the turf. Space the seam the same width as the stitch rows and they become invisible. My family runs an install company exclusively doing artificial turf. I've done over 50,000 sq ft and I can atest that the s seams are more visible and produce a lot of waste. Roll orientation and fluffing the turf after it's fully installed is the only way to do it!
Field Turf ZL-07. Hands down best lawn turf. My family runs a turf installation company and we've done over 80,000 square feet with ZL-07 this year alone. Everything from high-end homes to school playgrounds. The guys are literally installing 7000 sq ft at a daycare as I type this out.
I noticed that you didn't show how they did there butt seam of if they checkered it. Another thing to ask those ppl taking shit about s seams no matter how perfect you cut the straight seams it will always be more visible than the s seam regardless of you remove factory defects and cut tight along the stitching along both turf pieces and have it gapped properly we never let our gaps exceed 1/4" even then it's to much 1/8 GAP is perfect
@@TigranGertz okay, I really want to start my own turf company I got everything I need but my problem is finding employees you have any advice ? Probably a dumb question but everyone starts somewhere.
@@TigranGertz Tee, l remember 4 years ago l was working for $15.00 an hour. It was for Kramers Masonry in Upland. That was my boss since 2000. I got my Masonry license in 2006 but the recession did hurt me. I'm back in business as of 2018 cause Steve Kramer my boss died. I'm learning from you even though pm much older. Hope to one day meet you
you pay $400 dollars a day for each guy?????????? lol i dont believe that. If you do, all the profit is going to your guys then. Maximum pay guys get paid labor $200 or crew leaders $250 day. But $400 a day per guy? Are you hiring? lol. I dont need that zig zag tool thing for perfect seams.
Mister t your all video I witch many landscape design no Belsen menu concrete and interlock person I no see Flower tree and tree , neutral bebal thise day all please concrete forts it is no good in future I think many many tree growing home in said I am English knowledge bad ti good future
You don’t pay your men 400 a day 😂😂 behave haha. Second point, I can’t see the benefit of the stencil s joint you do? It you do a straight joint and it’s cut on the correct part of the seam you don’t see if anyway. Literally just wasting time
You don’t have to use that tool. As long as it’s cut in any wavy pattern, just cut the other side to it. Seams always hidden. Been doing that since 2018. I’m Jay Lopez in GOAT GANG 🐐🤟🏽
![[DRIP] ‘Woke Up In Tokyo (RUKA & ASA)’ PREVIEW](http://i.ytimg.com/vi/QN44lcR_VkI/mqdefault.jpg)
Thank you for sharing, it really take POWER for professionals to admit when a mistake is done on the job. High 5 you went back to make it right⭐power move
I’ve been installing turf for 7 years now, I love it. Tbh with you there’s no need for an “S” seam when you know what you are doing and the quality of the turf is good. In my opinion, it’s just more waste of turf and labor. I don’t mean to tell you how to run your business but this is what I do for a living and I know that the faster you get these jobs out and the less you spend on labor the more money there is left in your pocket at the end of the day. You have 4 people doing one 12-13 ft seam. That could have easily be done by one or two persons while the other 2-3 stretch and nail the rest of the area. “S” seams maybe visible if not done correctly because you’re cutting through the fibers instead of in between them.Straight seams would be fine as long as you cut enough stitching off the sides first. If you look at the side ends of the turf when you first get it (the black ends you need to cut off in order to seam) the turf tends to go sideways because of how it’s made so you need to cut off at least 4-5 lines and then you can start seeing the fibers straightening up. Most of the time when you have a seam that “Mohawks” this is the reason why or it’s overlapped. I would also recommend using staples for the seam they allow you to spread or tighten up the seam as you do it. These are things not a lot of people know unless they do this right and everyday. I work all over Southern California let me know if you ever need some help my team can help yours grow.
Do you know a site were i can see this work done
You hit the nail on the head, agree 100 percent.
i use the procutta seam tool. i have tried all ways. found out its much better and invisible seam 100% of the time.
we use the procutta then handcut it in. it really quick once you master it. way faster and 100% of the time.
sometime when you do straight seam, if the ground is not perfect flat you will have trouble.
okay you guys know about zigzag seams? ill make video about that sometime.
@@enviouslawn1665 you’re correct about the leveling of the ground, if not leveled right straight seams maybe visible. If you’re good at what you do, you can get away with straight seams but in my opinion, the zig zag seams work the best, no expensive tool needed, no need to cut through fibers all straight cuts and less turf wasted. I try to minimize how much turf I waste as much as possible because those inches turn into sqft, sqft turn into dollars.
How might one inquire your services
its taken me and my company some time to perfect artificial turf. Its harder then most people think. thank you for sharing this.
Yeah man, going through something similar.
The more videos I see from you the more I want to join goat gang ! Lol.
I have my very first big job this upcoming month and your video really helped me out. Keep up the good work bro
Hopefully you didn't do anything shown here!!
Crazy to see this. Like, "wth" are they doing???
Stop watching your videos for a while but always been subscribed, very happy for your success keep it up man
Thanks for your comment 👍
𝘞𝘳𝘪𝘵𝘦 𝘮𝘺 𝘣𝘳𝘰𝘬𝘦𝘳 𝘈𝘳𝘵𝘩𝘶𝘳 𝘙𝘢𝘧𝘢𝘦𝘭 𝘈𝘺𝘣𝘢𝘳 𝘰𝘯 𝘞𝘩𝘢𝘵𝘴𝘈𝘱𝘱 𝘵𝘰 𝘦𝘢𝘳𝘯 𝘩𝘶𝘨𝘦 𝘪𝘯 𝘣𝘪𝘵𝘤𝘰𝘪𝘯 𝘵𝘳𝘢𝘥𝘪𝘯𝘨 𝘧𝘰𝘳,𝘩𝘪𝘴 𝘴𝘵𝘳𝘢𝘵𝘦𝘨𝘪𝘦𝘴 𝘢𝘳𝘦 𝘵𝘰𝘱 𝘯𝘰𝘵𝘤𝘩,𝘩𝘦'𝘴 𝘳𝘦𝘢𝘭𝘭𝘺 𝘮𝘢𝘬𝘪𝘯𝘨 𝘮𝘦 𝘩𝘶𝘨𝘦 𝘨𝘢𝘪𝘯𝘴 𝘸𝘪𝘵𝘩 𝘩𝘪𝘴 𝘴𝘵𝘳𝘢𝘵𝘦𝘨𝘪𝘦𝘴 𝘪𝘯 𝘵𝘳𝘢𝘥𝘪𝘯𝘨.
⬇️⬇️
*+1 8 3 2 4 2 0 0 4 8 7*
Respect in fixing a mistake! This is craftsmanship building on your work even work that has errors.
Thats what im talking about tigran as time goes you learn and perfect your craft something you gotta take a hit but its bidness
You don’t have to use that tool. As long as it’s cut in any wavy pattern, just cut the other side to it. Seams always hidden. Been doing that since 2018. I’m Jay Lopez in GOAT GANG 🐐🤟🏽
brilliant open and honest
Oh man I've been there, unlike the one inch space you just mentioned on the gap we had the bottom touching exactly and the customer could see it slightly. I did the same thing, bought a new piece, cut the "S" line and the customer was happy. Total cost was only $1,600 thankfully and the guys got some work. Great result by the end but as mentioned yes it was costly.
The seam is very important, but you don't need the curvy tool. Cut the seam correcting straight works just as well. 3/8 is the separation you need between the 2 pieces of grass. It's not that hard! Biggest problem are the corrupt contractors out there. Sad part is there are more poor ones then good ones - they'll nickel and dime you to death.
I would also suggest getting some synlock and some seeming glue that way when you finish the seem and its done correctly that seem tape and glue will hold it in place guarantee
Don't forget the pay back for the wife faint which had nothing to do with me 😴😭
If the scene doesn’t meet for only a half inch or an inch can’t you use a carpet kicker and stretch it in both ways would that work?
Am I understanding that is artificial grass over concrete?
I ask cause I'm interested in same. But, how can it drain, so that materials of artificial grass is not siting in pools of water when it rains for days?
Thank you
People just think we make money. Sometimes it cost us to do projects. Great looking video!
Hi Tigran, why don't you use glue in the joints but only the nails?
When the workers seen this video, they all had the same question. Who the F is making 50 bucks a hr? 🤣🤣
Exactly!
Add workers comp ins etc it’s more than 50$ per hour for the employer
$400 a day fuck that. If I’m paying $400 a day for some guys to do it right they better fix that for free
@@CarlosGonzalez-oi6zv I agree. This guy just throws senseless money away.
My workers
Like always my Mexican brothers doing the hard labor. Mexican power. I appreciate my people
Mexican power
Let’s be realistic, the guys are not making $400😅. At most your only Spanish speakers are being paid $25 per hours and a full day of 8 hrs is $200 per guy. Cmon man😅
Where did you get the curve tool for tracing the cuts.?
You should of have them more 🥧 🥧 🥧 🥧 🥧 🥧 🥧 for thanksgiving
Great job i learn the most from my mistakes and keep growing thru failure.
Not the best way for some seems to be working for me as I go mistake free for a few months at a time.
Thank for take your time to share it
I want to work at this job but don’t know how to start
Where do you buy the tool for seems? Thanks for the video
Enjoy the content. Admire your work ethic
Thanks for your comment 👍
𝘞𝘳𝘪𝘵𝘦 𝘮𝘺 𝘣𝘳𝘰𝘬𝘦𝘳 𝘈𝘳𝘵𝘩𝘶𝘳 𝘙𝘢𝘧𝘢𝘦𝘭 𝘈𝘺𝘣𝘢𝘳 𝘰𝘯 𝘞𝘩𝘢𝘵𝘴𝘈𝘱𝘱 𝘵𝘰 𝘦𝘢𝘳𝘯 𝘩𝘶𝘨𝘦 𝘪𝘯 𝘣𝘪𝘵𝘤𝘰𝘪𝘯 𝘵𝘳𝘢𝘥𝘪𝘯𝘨 𝘧𝘰𝘳,𝘩𝘪𝘴 𝘴𝘵𝘳𝘢𝘵𝘦𝘨𝘪𝘦𝘴 𝘢𝘳𝘦 𝘵𝘰𝘱 𝘯𝘰𝘵𝘤𝘩,𝘩𝘦'𝘴 𝘳𝘦𝘢𝘭𝘭𝘺 𝘮𝘢𝘬𝘪𝘯𝘨 𝘮𝘦 𝘩𝘶𝘨𝘦 𝘨𝘢𝘪𝘯𝘴 𝘸𝘪𝘵𝘩 𝘩𝘪𝘴 𝘴𝘵𝘳𝘢𝘵𝘦𝘨𝘪𝘦𝘴 𝘪𝘯 𝘵𝘳𝘢𝘥𝘪𝘯𝘨
⬇️⬇️⬇️
*+1 8 3 2 4 2 0 0 4 8 7*
$400/day 😯 I'm coming to work for you!
$400 charged to the customer. Thats with overhead markup. If he pays his guys $20/h and their working 10h+ days T is paying out $200 per guy per day off the bat.
Yeah this stuff is basically like carpet, we call that tool a snake bar
Seams are challenging because to much gap and you can see it but if your to close with the seam you have the "mohawk" effect.
I learned as a general contractor that integrity is hard. And sometimes it is hard on the wallet.
Do you use seam Tape , I did not see it on that video? thanks
More wave flies? 😭
So they used tetley nad and then used brain tangerine to cover the other nad to cover canada to deploy snoopy butt face plug to use on the bow altair to cover the terrible fan seep sea creature situation with the preganant witch situation then made the one sperm cell as ball tadpole frog chicken leg to cover the pregnant bump 😭
Wouldve been better to see the finished product instead of the speaker so much.
I love your videos man big inspiration thanks
Thanks for your comment 👍
𝘞𝘳𝘪𝘵𝘦 𝘮𝘺 𝘣𝘳𝘰𝘬𝘦𝘳 𝘈𝘳𝘵𝘩𝘶𝘳 𝘙𝘢𝘧𝘢𝘦𝘭 𝘈𝘺𝘣𝘢𝘳 𝘰𝘯 𝘞𝘩𝘢𝘵𝘴𝘈𝘱𝘱 𝘵𝘰 𝘦𝘢𝘳𝘯 𝘩𝘶𝘨𝘦 𝘪𝘯 𝘣𝘪𝘵𝘤𝘰𝘪𝘯 𝘵𝘳𝘢𝘥𝘪𝘯𝘨 𝘧𝘰𝘳,𝘩𝘪𝘴 𝘴𝘵𝘳𝘢𝘵𝘦𝘨𝘪𝘦𝘴 𝘢𝘳𝘦 𝘵𝘰𝘱 𝘯𝘰𝘵𝘤𝘩,𝘩𝘦'𝘴 𝘳𝘦𝘢𝘭𝘭𝘺 𝘮𝘢𝘬𝘪𝘯𝘨 𝘮𝘦 𝘩𝘶𝘨𝘦 𝘨𝘢𝘪𝘯𝘴 𝘸𝘪𝘵𝘩 𝘩𝘪𝘴 𝘴𝘵𝘳𝘢𝘵𝘦𝘨𝘪𝘦𝘴 𝘪𝘯 𝘵𝘳𝘢𝘥𝘪𝘯𝘨.
⬇️⬇️
*+1 8 3 2 4 2 0 0 4 8 7*
You have turned into an outdoor carpet installer
I live in MN and I bought a house in the winter and the home owner did the Turf it is such a shitty job. I'll have to redo it in a few years.
Tigran, What’s the brand of that wavy tool pattern?
This is where I call BS.
1/2 inch seam? There is no way! No installer could ever miss that big of a gap.
Welp, they did haha
Right,it’d be like me a carpenter and putting in subfloor sheathing and it run out a half inch and not see it,you’d have to be blind or just not GAF
8th gap for expansion
Blame it on the hands..smh I’m a landscape business owner. The difference between me and this guy is I’m out there cutting installing and getting dirty. If he cared that much about the job he would have been there and not just worried about his profit. I feel sorry for his clients and employees...
So do it right the first time, got it.
Thanks for your comment 👍
𝘞𝘳𝘪𝘵𝘦 𝘮𝘺 𝘣𝘳𝘰𝘬𝘦𝘳 𝘈𝘳𝘵𝘩𝘶𝘳 𝘙𝘢𝘧𝘢𝘦𝘭 𝘈𝘺𝘣𝘢𝘳 𝘰𝘯 𝘞𝘩𝘢𝘵𝘴𝘈𝘱𝘱 𝘵𝘰 𝘦𝘢𝘳𝘯 𝘩𝘶𝘨𝘦 𝘪𝘯 𝘣𝘪𝘵𝘤𝘰𝘪𝘯 𝘵𝘳𝘢𝘥𝘪𝘯𝘨 𝘧𝘰𝘳,𝘩𝘪𝘴 𝘴𝘵𝘳𝘢𝘵𝘦𝘨𝘪𝘦𝘴 𝘢𝘳𝘦 𝘵𝘰𝘱 𝘯𝘰𝘵𝘤𝘩,𝘩𝘦'𝘴 𝘳𝘦𝘢𝘭𝘭𝘺 𝘮𝘢𝘬𝘪𝘯𝘨 𝘮𝘦 𝘩𝘶𝘨𝘦 𝘨𝘢𝘪𝘯𝘴 𝘸𝘪𝘵𝘩 𝘩𝘪𝘴 𝘴𝘵𝘳𝘢𝘵𝘦𝘨𝘪𝘦𝘴 𝘪𝘯 𝘵𝘳𝘢𝘥𝘪𝘯𝘨.
⬇️⬇️
*+1 8 3 2 4 2 0 0 4 8 7*
Excuse me! Weren’t you there to supervise the work? You took the order so, u are responsible for fixing it!
Running a company takes a lot of off-site work too, getting materials, meeting other clients, appointments at banks, etc.
Nothing beats the smell of fresh cut grass
Asphalt in the morning
Is it me or they put the other side with the wrong orientation? Cause the light is hitting it different. lels
I could save you even more money! You don’t need that tool just need a guy with the right mind set!
You make mistakes you just got to fix them and take the L. Reputation is the key to success for a contractor.
What is the name of that tool ?
Bring back the peoples champ!
Haha. He’s coming back
I make a spray that smells like fresh cut grass
hey everyone watch that ditch witch video see if you think that's how your supposed to treat your best friends
Thanks for your comment 👍
𝘞𝘳𝘪𝘵𝘦 𝘮𝘺 𝘣𝘳𝘰𝘬𝘦𝘳 𝘈𝘳𝘵𝘩𝘶𝘳 𝘙𝘢𝘧𝘢𝘦𝘭 𝘈𝘺𝘣𝘢𝘳 𝘰𝘯 𝘞𝘩𝘢𝘵𝘴𝘈𝘱𝘱 𝘵𝘰 𝘦𝘢𝘳𝘯 𝘩𝘶𝘨𝘦 𝘪𝘯 𝘣𝘪𝘵𝘤𝘰𝘪𝘯 𝘵𝘳𝘢𝘥𝘪𝘯𝘨 𝘧𝘰𝘳,𝘩𝘪𝘴 𝘴𝘵𝘳𝘢𝘵𝘦𝘨𝘪𝘦𝘴 𝘢𝘳𝘦 𝘵𝘰𝘱 𝘯𝘰𝘵𝘤𝘩,𝘩𝘦'𝘴 𝘳𝘦𝘢𝘭𝘭𝘺 𝘮𝘢𝘬𝘪𝘯𝘨 𝘮𝘦 𝘩𝘶𝘨𝘦 𝘨𝘢𝘪𝘯𝘴 𝘸𝘪𝘵𝘩 𝘩𝘪𝘴 𝘴𝘵𝘳𝘢𝘵𝘦𝘨𝘪𝘦𝘴 𝘪𝘯 𝘵𝘳𝘢𝘥𝘪𝘯𝘨.
⬇️⬇️
*+1 8 3 2 4 2 0 0 4 8 7*
The person who was in charge of that turf job should of never left without fixing the seam. Bad seams is a Hard NO. Cool tool tho
Wow how much do you pay your installers? 400?
the world may never know....
I watched another vid from a turf vendor. They say cut it straight and match the stitching gap so the seems don't show. Maybe that's harder said than done on long runs but those waves look like a bitch to seam.
Thats dumb cut just cut it straight...
Was wondering where you got that seam pattern tool.
I don't remember, probably like home depot or something
Don't waste your time with it. Straight seems done correctly match the rest of the turf. Space the seam the same width as the stitch rows and they become invisible. My family runs an install company exclusively doing artificial turf. I've done over 50,000 sq ft and I can atest that the s seams are more visible and produce a lot of waste. Roll orientation and fluffing the turf after it's fully installed is the only way to do it!
I need to get in the goat gang
Thanks for your comment 👍
𝘞𝘳𝘪𝘵𝘦 𝘮𝘺 𝘣𝘳𝘰𝘬𝘦𝘳 𝘈𝘳𝘵𝘩𝘶𝘳 𝘙𝘢𝘧𝘢𝘦𝘭 𝘈𝘺𝘣𝘢𝘳 𝘰𝘯 𝘞𝘩𝘢𝘵𝘴𝘈𝘱𝘱 𝘵𝘰 𝘦𝘢𝘳𝘯 𝘩𝘶𝘨𝘦 𝘪𝘯 𝘣𝘪𝘵𝘤𝘰𝘪𝘯 𝘵𝘳𝘢𝘥𝘪𝘯𝘨 𝘧𝘰𝘳,𝘩𝘪𝘴 𝘴𝘵𝘳𝘢𝘵𝘦𝘨𝘪𝘦𝘴 𝘢𝘳𝘦 𝘵𝘰𝘱 𝘯𝘰𝘵𝘤𝘩,𝘩𝘦'𝘴 𝘳𝘦𝘢𝘭𝘭𝘺 𝘮𝘢𝘬𝘪𝘯𝘨 𝘮𝘦 𝘩𝘶𝘨𝘦 𝘨𝘢𝘪𝘯𝘴 𝘸𝘪𝘵𝘩 𝘩𝘪𝘴 𝘴𝘵𝘳𝘢𝘵𝘦𝘨𝘪𝘦𝘴 𝘪𝘯 𝘵𝘳𝘢𝘥𝘪𝘯𝘨
⬇️⬇️⬇️
*+1 8 3 2 4 2 0 0 4 8 7*
Great video very informative. Hope you don't mind if I share it with our online shoppers.
Go for it!
hi! Can anyone tell me what is the best artificial turf in the market? thanks
Field Turf ZL-07. Hands down best lawn turf. My family runs a turf installation company and we've done over 80,000 square feet with ZL-07 this year alone. Everything from high-end homes to school playgrounds. The guys are literally installing 7000 sq ft at a daycare as I type this out.
I noticed that you didn't show how they did there butt seam of if they checkered it. Another thing to ask those ppl taking shit about s seams no matter how perfect you cut the straight seams it will always be more visible than the s seam regardless of you remove factory defects and cut tight along the stitching along both turf pieces and have it gapped properly we never let our gaps exceed 1/4" even then it's to much 1/8 GAP is perfect
Are those your employees? Or are they guys that you contracted for that job
Employees
@@TigranGertz okay, I really want to start my own turf company I got everything I need but my problem is finding employees you have any advice ? Probably a dumb question but everyone starts somewhere.
Lol I have the same percentage on my TH-cam channel 😂😂😂 for my subscribers 😂
By the way good tips 🔥🔥🔥
What do you do to anchor the turf to the concrete?
It’s baserock.
Nails
You're paying each guy $400 a day?!?!
This installing thing doesnt look fun. I think ill go into the artifical grass cleaning business instsead...
Could just change the design
Show us finished product!? Que pasa??
Maybe one day
400 a day and he's me and n 100 a day I need a new boss
Thats for lazy city slickers. I actually enjoy mowing.
Why don’t yo
T, I want to be successful like you. You told me to unsubscribe I unsubscribed whatever you tell me i will do.
Haha. Join goat gang first. Goatgang.Net
400$ a day no way
🐐
How to enter in goat gang
Goatgang.Net
"The ghetto way"?
Yeah I've been doing turf for 6 years and that tool is useless
Haha
400 a day??? You hiring? Lol
His cost not what they actually make lol
Correct. W overhead
So an employee costs your business 2x what you pay them? Assuming $20/hr.
That’s $200 in overhead cost per employee per day?
So what to you bill out a day for a guy that costs you $400?
I'm going to unsubscribe to subscribe again lol
Hahaha
Hard to hear
$400 a day yea ok
Looks great
Your over paying your labor guys
You're workers really make 400 a day?
some do, some make more, and others make less, depends on the worker
Each guy $400.00 a day
yea
@@TigranGertz Tee, l remember 4 years ago l was working for $15.00 an hour. It was for Kramers Masonry in Upland. That was my boss since 2000.
I got my Masonry license in 2006 but the recession did hurt me.
I'm back in business as of 2018 cause Steve Kramer my boss died.
I'm learning from you even though pm much older. Hope to one day meet you
you pay $400 dollars a day for each guy?????????? lol i dont believe that. If you do, all the profit is going to your guys then. Maximum pay guys get paid labor $200 or crew leaders $250 day. But $400 a day per guy? Are you hiring? lol. I dont need that zig zag tool thing for perfect seams.
Noiceeeeeeeeeeeeeeeeeee
Thanks for your comment 👍
𝘞𝘳𝘪𝘵𝘦 𝘮𝘺 𝘣𝘳𝘰𝘬𝘦𝘳 𝘈𝘳𝘵𝘩𝘶𝘳 𝘙𝘢𝘧𝘢𝘦𝘭 𝘈𝘺𝘣𝘢𝘳 𝘰𝘯 𝘞𝘩𝘢𝘵𝘴𝘈𝘱𝘱 𝘵𝘰 𝘦𝘢𝘳𝘯 𝘩𝘶𝘨𝘦 𝘪𝘯 𝘣𝘪𝘵𝘤𝘰𝘪𝘯 𝘵𝘳𝘢𝘥𝘪𝘯𝘨 𝘧𝘰𝘳,𝘩𝘪𝘴 𝘴𝘵𝘳𝘢𝘵𝘦𝘨𝘪𝘦𝘴 𝘢𝘳𝘦 𝘵𝘰𝘱 𝘯𝘰𝘵𝘤𝘩,𝘩𝘦'𝘴 𝘳𝘦𝘢𝘭𝘭𝘺 𝘮𝘢𝘬𝘪𝘯𝘨 𝘮𝘦 𝘩𝘶𝘨𝘦 𝘨𝘢𝘪𝘯𝘴 𝘸𝘪𝘵𝘩 𝘩𝘪𝘴 𝘴𝘵𝘳𝘢𝘵𝘦𝘨𝘪𝘦𝘴 𝘪𝘯 𝘵𝘳𝘢𝘥𝘪𝘯𝘨.
⬇️⬇️
*+1 8 3 2 4 2 0 0 4 8 7*
Mister t your all video I witch many landscape design no Belsen menu concrete and interlock person I no see Flower tree and tree , neutral bebal thise day all please concrete forts it is no good in future I think many many tree growing home in said I am English knowledge bad ti good future
Thanks for your comment 👍
𝘞𝘳𝘪𝘵𝘦 𝘮𝘺 𝘣𝘳𝘰𝘬𝘦𝘳 𝘈𝘳𝘵𝘩𝘶𝘳 𝘙𝘢𝘧𝘢𝘦𝘭 𝘈𝘺𝘣𝘢𝘳 𝘰𝘯 𝘞𝘩𝘢𝘵𝘴𝘈𝘱𝘱 𝘵𝘰 𝘦𝘢𝘳𝘯 𝘩𝘶𝘨𝘦 𝘪𝘯 𝘣𝘪𝘵𝘤𝘰𝘪𝘯 𝘵𝘳𝘢𝘥𝘪𝘯𝘨 𝘧𝘰𝘳,𝘩𝘪𝘴 𝘴𝘵𝘳𝘢𝘵𝘦𝘨𝘪𝘦𝘴 𝘢𝘳𝘦 𝘵𝘰𝘱 𝘯𝘰𝘵𝘤𝘩,𝘩𝘦'𝘴 𝘳𝘦𝘢𝘭𝘭𝘺 𝘮𝘢𝘬𝘪𝘯𝘨 𝘮𝘦 𝘩𝘶𝘨𝘦 𝘨𝘢𝘪𝘯𝘴 𝘸𝘪𝘵𝘩 𝘩𝘪𝘴 𝘴𝘵𝘳𝘢𝘵𝘦𝘨𝘪𝘦𝘴 𝘪𝘯 𝘵𝘳𝘢𝘥𝘪𝘯𝘨.
Second one !
The mistake was installing fake turf. Your too good for fakeness Tigran keep it real!
Homeowners decision
You make more money installing fake turf!
@@havanaday9981landscapers are the experts not homeowners. Homeowners need to be educated.
@@user-kn1rg2br4h not true. Check out my Kurapia videos. Much more profit and better for the planet.
@@MonarchSustainableLandscaping You make landscaping videos? Why haven’t I heard of you?
You don’t pay your men 400 a day 😂😂 behave haha. Second point, I can’t see the benefit of the stencil s joint you do? It you do a straight joint and it’s cut on the correct part of the seam you don’t see if anyway. Literally just wasting time
400 a day !!
Sounds good for camera 😉
@@Putt4fun what do you mean by camera
@@Putt4fun ohhh I see 🙃
First
Frist
First! Let’s gooo
I unsubscribed 👍
Why
U should join goat gang
@@seanreville1668 Dude! He told me to do it.
Perfect!
@@TigranGertz
TV
4000 dollars error and still no frabic
You don’t have to use that tool. As long as it’s cut in any wavy pattern, just cut the other side to it. Seams always hidden. Been doing that since 2018. I’m Jay Lopez in GOAT GANG 🐐🤟🏽
Thanks for your comment 👍
𝘞𝘳𝘪𝘵𝘦 𝘮𝘺 𝘣𝘳𝘰𝘬𝘦𝘳 𝘈𝘳𝘵𝘩𝘶𝘳 𝘙𝘢𝘧𝘢𝘦𝘭 𝘈𝘺𝘣𝘢𝘳 𝘰𝘯 𝘞𝘩𝘢𝘵𝘴𝘈𝘱𝘱 𝘵𝘰 𝘦𝘢𝘳𝘯 𝘩𝘶𝘨𝘦 𝘪𝘯 𝘣𝘪𝘵𝘤𝘰𝘪𝘯 𝘵𝘳𝘢𝘥𝘪𝘯𝘨 𝘧𝘰𝘳,𝘩𝘪𝘴 𝘴𝘵𝘳𝘢𝘵𝘦𝘨𝘪𝘦𝘴 𝘢𝘳𝘦 𝘵𝘰𝘱 𝘯𝘰𝘵𝘤𝘩,𝘩𝘦'𝘴 𝘳𝘦𝘢𝘭𝘭𝘺 𝘮𝘢𝘬𝘪𝘯𝘨 𝘮𝘦 𝘩𝘶𝘨𝘦 𝘨𝘢𝘪𝘯𝘴 𝘸𝘪𝘵𝘩 𝘩𝘪𝘴 𝘴𝘵𝘳𝘢𝘵𝘦𝘨𝘪𝘦𝘴 𝘪𝘯 𝘵𝘳𝘢𝘥𝘪𝘯𝘨
⬇️⬇️⬇️
*+1 8 3 2 4 2 0 0 4 8 7*