Me too! Got a titan x maxwell for 150$ from my boss, stole an i5 8400 and a 500 gb m2 ssd from a prebuilt hp. Still spent about 750$ at micro center but couldn’t be happier. This case is super nice just kinda small. Also I did spring for an rgb mouse, decent rgb keyboard and dropped 60$ on an XL rgb mousepad...all well worth it
Thanks for this..was going to fit my corsair vengeance RGB ram..luckily I'm building another pc so the corsair RAM can be used for that...purchased the crucial ballistics RGB ram...not cheap but I want this build to work...thanks again
@@CloroxBleach-dq8mr you can front mount the radiator, but obviously this can cause problems with keeping the pump below the radiator...I purchased some Ballistix low profile RAM this allowed me to mount the radiator at the top. Hope you get it sorted 👍
Very nice build it is like mine. improve from the previous video I saw it! This is very well Explained did a very nice job also in building it and placing the aio on top was wise 😉. I have the same case and I’m wondering if I it can vertical stand the gpu.
Hello ! I have no fan on back in my New 220t : its problematic ? If i wich add one, how much câble ? Just one to node plug? And, i have a cpu fan with rgb but no aio or water , its enhoug ? Or my i7 last gen need a better CPU fan ? Thanks for your help and sorry for my english 🙏☺️
Whould crosair veangance rgb pro work if i used a diffrent cooler? I want to get a ryzen 5 5600x cpu and it comes with a cooler. So whould veangance rgb pro work with that?
I'm building in the corsair 220t airflow rgb I got an arctic 240 ARGB aio which can't be front-mounted because of my gpu and im wondering would the Corsair Vengeance RGB Pro SL 32GB fit with a top-mounted aio?
I got the case, there will be a pcb-controller on the back of the case and u can just simply plug every fan into the controller for the rgb effects. For the power supply, u can buy a fan-hub for like 8€/$ if u dont want to plug everyone on a sys_fan on the mainboard.
@@LAVDIMRECORDZ yes, the Controller is only for the colors / RGB, the cable from each fan is labeled with "RGB Hub", this goes into the Controller. The Other cable from every Fan is the Power supply that makea them rotate. U Need to plug them into fan ports on your mainboard, should be 4 pin ports labeled anything with Fan. If U dont have enough ports, U can Buy a fan hub which splits one power port into 5 for the fans
@@fahrinraez9547 the ballistix are 39.17 mm and the vengeance sl 44mm and if you go at 2:58 you can see the ballistix are at the limit so logically the corsair can’t be use here 😥
Does anyone knows what is the exact model of the fan used in H100i?i was thinking if it can be replaced with another low profile corasir rgb fan so it can accomodate other taller RAM...
Hey Alex, I see you used the ballistix ram and it fits, I see you mentioned the RGB variant of this ram will work too, but by looking at the size of the gap at the end, I really don’t think it would fit because that gap is absolutely tiny, are you sure the RGB version will fit? Thanks.
im pretty sure its physically impossible to fit a radiator in with a asus tuf 3070 oc edition for the front because it goes all the way to the end and with corsair vengeance ram for the top because they are very tall, idk what to do..
Hey Alex, I have an msi b550 gaming edge WiFi motherboard and patriot viper rgb ram. Could I fit an aio at the top? Probably going to use a Corsair aio or msi core liquid cpu cooler
you could just get the 275r if you wanted the full size. i dont think they will have it in this model mainly because corsair already have good cases for full sizes.
Hi. I am interested in buying one but i dont know if a push pull mounted in front, at the top is worth, i saw you have said that it’s imposible and i dont know why xD Thanks in advance
I had problems getting my GPU in the case not a clearance problem rather it just didn't reach far in enough to actually get into the pcie slot on the mb all the way. Eventually got it but is it a problem anyone else dealt with? Mb Asus X570 GPU XfX Rx 5500xt
Bro can u help me out? The gpu I wanna get for a all white build is the asus rog rtx 3070 white which is 318mm. The case only supports 300mm, I figured out that a sp120mm is 25mm and if i remove one from the front the gpu would fit. Do you think this will work out?
Had the same problem...so purchased the low profile crucial ballistics...side mounting the cooler can cause problems pump noise etc...only became aware after I bought the icue 220T case...
Got the same question , the gpu is 318mm and the max gpu size is 300mm, but if u remove a fan(sp120 which comes with the case) which is 25mm it should fit, but I'm not sure
I'm trying to figure out if the evga rtx 3070 xc3 ultra will fit with my aio up front, I did some measurements and it's like exactly the length of the gpu away from the back panel
Well its not really necessary since the AiO takes the air which is inside the case but i would recommend it for better airflow. If u stay with SP-Serious fans which will come with the case (3 pieces) then another extra one would cost u only 20€/$
I don't think that the solution to radiators not fitting at the top of the case when using an ATX motherboard should be solved/avoided by choosing different ram. I have the exact same issue on my build with the 220T (also I watched your previous guide, very helpful), Im using Viper RGB ram, and there's no way it would fit at the top. It could very well work, but you might aswell choose a bigger case, smaller mother board, or just mount it to the side. Anyways thanks for your videos, they are very helpful!
I have experience overclocking this processor to 5Ghz and it boasts very good performance for under 200 dollars specifically for gaming, especially paired with a 3070. Easily hit 165hz on a 2k Monitor in COD Warzone with high quality textures.
@@Alexkrastev yeah I'm not saying it's a bad choice personally I have an i7, but it seems that most people think AMD is king right now in the lower ranges right?
@@mads4059 I haven't done enough research on AMD's lower end processors specifically in the gaming sector, the i5 9600k is just one i'm comfortable with when building for friends knowing it will be great performance for not too high price when overclocked. I use a Threadripper 3960x for my main PC though.
Ok but 10400f exist. On budget side 10100f and 10400f are really only great offerings from intel and amd have 3100 and 3300x which are again somewhat expensive than 10100f and 10400f and mostly un available..so budget side intel wins ! Otherwise its Amd! And i assume that you made this built which laying around parts. So the build is okay otherwise you shouldn't but it
Yeah I only reference him here because everyone was so anal about it in my last video on this case which was intentionally done wrong to show you how to not build a pc in the 220T.
Solid processor, strictly for gaming, especially when overclocked to 5Ghz. Got this one for only 160ish and that’s a killer price to performance. And best of all, it’s actually in stock. Lol
why dont you just get coolermaster or noctua cpu cooler, i do not think you need to have aio with 3600. and it is much easier to just look the dimensions.
Nice job Alex, I mirrored tinted my old 220t case, switched to the 4000x with all glass because I wanted the AIO top mounted with the Veageance pro
I am using the Corsair 220T for my first build
Me too! Got a titan x maxwell for 150$ from my boss, stole an i5 8400 and a 500 gb m2 ssd from a prebuilt hp. Still spent about 750$ at micro center but couldn’t be happier. This case is super nice just kinda small. Also I did spring for an rgb mouse, decent rgb keyboard and dropped 60$ on an XL rgb mousepad...all well worth it
Me too
Where does the usb a come from? Does it come from the Gpu or motherboard or what? But good vid. I will follow this guide when I get my pc
Thanks for this..was going to fit my corsair vengeance RGB ram..luckily I'm building another pc so the corsair RAM can be used for that...purchased the crucial ballistics RGB ram...not cheap but I want this build to work...thanks again
just made that mistake man, not sure as to what i should do now.
@@CloroxBleach-dq8mr you can front mount the radiator, but obviously this can cause problems with keeping the pump below the radiator...I purchased some Ballistix low profile RAM this allowed me to mount the radiator at the top. Hope you get it sorted 👍
Pls tell me if the corsair vengeance pro sl can go into it
Any other RGB low profile ram that will fit in this configuration that is good? Also will the hydro 100i platinum SE fit in this configuration?
Should do
The vengeance LPX should fit. Not rgb but good ram none the less
What about replacing the AIO fans with slim-low profile fans? Would that make the clearance a non-issue?
Very nice build it is like mine. improve from the previous video I saw it! This is very well Explained did a very nice job also in building it and placing the aio on top was wise 😉. I have the same case and I’m wondering if I it can vertical stand the gpu.
Hello ! I have no fan on back in my New 220t : its problematic ?
If i wich add one, how much câble ? Just one to node plug?
And, i have a cpu fan with rgb but no aio or water , its enhoug ?
Or my i7 last gen need a better CPU fan ?
Thanks for your help and sorry for my english 🙏☺️
Here is my build list:
Case - Corsair iCUE 220T RGB Airflow ATX Mid Tower Case
Motherboard - MSI MPG B550 GAMING CARBON WIFI ATX AM4
CPU - AMD Ryzen 5 3600 3.6 GHz 6
CPU Cooler - Corsair iCUE H100i RGB PRO XT 75 CFM Liquid CPU Cooler
Memory - #4 Crucial Ballistix 16 GB (2 x 8 GB) DDR4
Graphics Card - ASUS TUF Gaming NVIDIA GeForce GTX 1650 OC
Storage - Western Digital Blue SN550 and Seagate Barracuda 2 TB
Power Supply - Corsair RMx (2021) 850 W 80+ Gold
Will this case fit a gigabyte z390-d motherboard or would I have to go for micro atx?
Whould crosair veangance rgb pro work if i used a diffrent cooler? I want to get a ryzen 5 5600x cpu and it comes with a cooler. So whould veangance rgb pro work with that?
I'm building in the corsair 220t airflow rgb I got an arctic 240 ARGB aio which can't be front-mounted because of my gpu and im wondering would the Corsair Vengeance RGB Pro SL 32GB fit with a top-mounted aio?
Hi buddy, do you plug each case fan to the motherboard individually or do you use some soft of hub / splitter ? Thanks and love the video!
I guess they get plugged into the controler in the back...
I got the case, there will be a pcb-controller on the back of the case and u can just simply plug every fan into the controller for the rgb effects. For the power supply, u can buy a fan-hub for like 8€/$ if u dont want to plug everyone on a sys_fan on the mainboard.
@@jazurka896 so the controller in back its just for Lighting bcs my fans do not work right now and i cant plug all my fans in my motherboard
@@LAVDIMRECORDZ yes, the Controller is only for the colors / RGB, the cable from each fan is labeled with "RGB Hub", this goes into the Controller. The Other cable from every Fan is the Power supply that makea them rotate. U Need to plug them into fan ports on your mainboard, should be 4 pin ports labeled anything with Fan. If U dont have enough ports, U can Buy a fan hub which splits one power port into 5 for the fans
@@LAVDIMRECORDZ every fan has one cable for color and one for power (Talking about Corsair)
would the corsair H100i Elite Capellix be able to work with the Vengeance pro
Corsair LPX ram would be i think! the only downside to it though is there is no RGB
I want to know that too
what about the sl version of it. Will it fit?
@@fahrinraez9547 the ballistix are 39.17 mm and the vengeance sl 44mm and if you go at 2:58 you can see the ballistix are at the limit so logically the corsair can’t be use here 😥
No, i Build it and it dont get into it with the corsair ram
Can a NZXT X63 RGB be mounted at the top with low profile RAM? I am really worried it doesn’t fit
Does anyone knows what is the exact model of the fan used in H100i?i was thinking if it can be replaced with another low profile corasir rgb fan so it can accomodate other taller RAM...
If balistix is 390mm would it fit vengeance pro rgb sl? Which is like 440mm
How to connect and power the 4 fans of the box plz!?
will the g.skill trident z royal fit ?? the ballistix are 3.92 cm and the g.skill ones are 4.4 cm
oh mann i got the same problem too, i would be too happy to know if its fits or not.... can someone help
If I use the Vengence PRO Memory will It fit?
Will the Kingston fury ram fit?
So this mean I can put say the nzxt x53 in this case with the vengeance rgb bro with a bit of squeeze
Hey Alex,
I see you used the ballistix ram and it fits, I see you mentioned the RGB variant of this ram will work too, but by looking at the size of the gap at the end, I really don’t think it would fit because that gap is absolutely tiny, are you sure the RGB version will fit? Thanks.
Yes im sure
Thanks bro 👍
Would you say I should keep the three stock fans at the front or move one to the back? I don’t have any other fans just those three
is it ok if your aio tubes touches the backplate of the gpu?, i mean does the heat from gpu transfer to the tubes??
no its ok
How do u change the color, or can u not
does this vary with the motherboard selected or will it work will all motherboards
im pretty sure its physically impossible to fit a radiator in with a asus tuf 3070 oc edition for the front because it goes all the way to the end and with corsair vengeance ram for the top because they are very tall, idk what to do..
Hey Alex, I have an msi b550 gaming edge WiFi motherboard and patriot viper rgb ram. Could I fit an aio at the top? Probably going to use a Corsair aio or msi core liquid cpu cooler
Hey! I’m planning on using the same motherboard as you and was debating between the same 2 aios, were you able to top mount it with that motherboard?
will tridentZ work?
do you think my h100i elite capellix would fit top mount? I have crucial ballistix ram
Did it fit?
Can a 3080 trio fit on that
is the ram 2 2x8gb sets?
I have patriot viper rgb ram. Would I be able to fit an 240mm aio in ?
I wish they made a full size version of this tower
No reason why they haven’t yet
Is there a full size one that looks like this?
you could just get the 275r if you wanted the full size. i dont think they will have it in this model mainly because corsair already have good cases for full sizes.
Love u for this vid i needed to know how to top mount my rad this helped so mu h
Hi. I am interested in buying one but i dont know if a push pull mounted in front, at the top is worth, i saw you have said that it’s imposible and i dont know why xD Thanks in advance
The way its done in this video is honestly the best way for this case. Avoid push pull in this case at all costs in my honest opinion.
I had problems getting my GPU in the case not a clearance problem rather it just didn't reach far in enough to actually get into the pcie slot on the mb all the way. Eventually got it but is it a problem anyone else dealt with?
Mb Asus X570
GPU XfX Rx 5500xt
y’all think trident ram would work?
Bro can u help me out?
The gpu I wanna get for a all white build is the asus rog rtx 3070 white which is 318mm.
The case only supports 300mm, I figured out that a sp120mm is 25mm and if i remove one from the front the gpu would fit. Do you think this will work out?
@Andy Aech thanks, I hope I can get any gpu in this time
Any chance u could a build using a the h115i and some gskill ripjaw ram? I have been heavily considering building is ths case withe the above parts.
The question is how do you Jerry rig it with the dominator platinum, that’s the conundrum I have right now 😆😆
i have the same case an radiator, ur saying i cant fit corsair vengeance ram sticks with it?
Had the same problem...so purchased the low profile crucial ballistics...side mounting the cooler can cause problems pump noise etc...only became aware after I bought the icue 220T case...
Would a 3080 strix fit in this case?
Got the same question , the gpu is 318mm and the max gpu size is 300mm, but if u remove a fan(sp120 which comes with the case) which is 25mm it should fit, but I'm not sure
Does the ram ballistix rgb pass with corsair h100i rgb platinium?
Yes it will fit
will gskill tridentz rgb sticks fit in this config?
How long can your GPU be with the front fans mounted?
Wouldn’t go above 290mm
@@joshresalsingh7016 My GPU is actually 290 mm, so if you have the case, are you sure theres space?
@@hans-christian712 Yes, but there will be a limit on airflow. I'd get a 4000X case if I were you.
@@joshresalsingh7016 Okay, thanks for your answers!
Is there any good corsair rgb fans to replace the radiator fans with?
LL120 RBG
@@jossedwards4099 thanks
Hi, can i fit this rtx 3070 asus ko with an h100i platinum front size mounted? on the same 220t case,
yes, the KO 3070 is 276 mm, the space free with a radiator mounted in front is above 283 mm
I'm trying to figure out if the evga rtx 3070 xc3 ultra will fit with my aio up front, I did some measurements and it's like exactly the length of the gpu away from the back panel
No way, my 3070 ti won’t fit with rog strix aio 240mm unfortunately
@@rugbyyy7714 you were right, I sold my 220t and got a 465x, fits no problem
my fans doesnt light up what should i do
Does it work with gskill trident z ?
would the tridentz fit with the h100i 240mm?
I found the R 650 also fits well
Cable video? :)
i got this same case a while back and my front fans never light up.
Do only sp120 fans work for the lighting node core?
Any Corsair RGB fans
isnt the power supply backwards?
Fan always goes down if you can. Best to pull fresh air from the bottom instead of hot air from the case. Logo ends up upside down with this psu.
Will corsair vengeance or hyperx fury work
Corsair vengeance (not the pro or por sl version) fits in this case
@@xmqxii5287 thanks
@@xmqxii5287 with a top mounted aio?
@@yt_chickenman7949 yes because u need ca. 3,9cm space and the vengeance is 3,5cm tall
Do you think it would be possible to have the aio on the top if I had vengeance lpx?
Currently running LPX ram, with a h100i capellix top mounted and I can confirm it'll fit. Barely
@@Toyotale. thanks!
Hey I currently have a 3080 FE in this case and it fits no problem, just can’t have a radiator on the front fans
Do we need a fan on the back?
Well its not really necessary since the AiO takes the air which is inside the case but i would recommend it for better airflow. If u stay with SP-Serious fans which will come with the case (3 pieces) then another extra one would cost u only 20€/$
*SP-Series
just got this case today 79.99 best buy
Its so nice
can a 320mm card fit in this case with front fan installed?
Maximum would be 310mm and that would most likely be touching the fan
@@joshresalsingh7016 aight thankies =(
@@yawakas1991 try the 4000x?
Or the 465
@@joshresalsingh7016 yee thankies sir, those two's awesome cases. 4000d looks nice btw XD
Oh no... at 2:39 they use the long screw to mount the radiator without fans in between the case...
My fans do not light up!! The ones that came with the case. Help!!
Mine does lol
Can u fit a aio on top using vengeance pro ram ?
If you’re using anything bigger than a 240mm radiator then no unless you take the fan off that goes above the dimm slots
Bro could you tell me where you connected the fans?
To the lightning node
@@Tootie27 Nah thats for the rgb whatever i mean on the mainboard or psu
following... how do you connect the 3 fans to power? (3 pin cable)
@@amir0ff read your mobo manual
I don't think that the solution to radiators not fitting at the top of the case when using an ATX motherboard should be solved/avoided by choosing different ram. I have the exact same issue on my build with the 220T (also I watched your previous guide, very helpful), Im using Viper RGB ram, and there's no way it would fit at the top. It could very well work, but you might aswell choose a bigger case, smaller mother board, or just mount it to the side. Anyways thanks for your videos, they are very helpful!
I have this case and fitted icue 240mm aio on top with hyperx ddr4 rgb ram. Guess i got lucky and chose the right ram
@P1 Noy yeah you must have, because there was no way mine was fitting 😂
(using the h100i pro xt with Viper RGB ram btw)
does anyone know if Gskill trident z will fit with a rad on the top? I have it in my 220t tempered glass version and want to put the rad on the top
no, i simply just have one aio fan screwed in with one screw since I don't want to drill into the fan housing.
can i put my vengenace ram in it
fr
Does a 3080 fit in the case ?
It should.
the gloves lol
🤣
What should I do?
Black: pcpartpicker.com/list/DGn2cT
or
White: pcpartpicker.com/list/DZTYF8
Has anyone tried this?
I get my capelix Thursday I will let you know how it goes
@@ItzzSwaggy sooo?
@@lildeepo7098 well I got it but forgot about this comment lol, yes it worked I mounted it to the top and it keeps it very very cool.
interesting that you chose the core i5 and not AMD
I have experience overclocking this processor to 5Ghz and it boasts very good performance for under 200 dollars specifically for gaming, especially paired with a 3070. Easily hit 165hz on a 2k Monitor in COD Warzone with high quality textures.
@@Alexkrastev yeah I'm not saying it's a bad choice personally I have an i7, but it seems that most people think AMD is king right now in the lower ranges right?
@@mads4059 I haven't done enough research on AMD's lower end processors specifically in the gaming sector, the i5 9600k is just one i'm comfortable with when building for friends knowing it will be great performance for not too high price when overclocked. I use a Threadripper 3960x for my main PC though.
@@Alexkrastev makes sense also helps that you don't need to worry about bending pins. Great vid btw
Ok but 10400f exist.
On budget side 10100f and 10400f are really only great offerings from intel and amd have 3100 and 3300x which are again somewhat expensive than 10100f and 10400f and mostly un available..so budget side intel wins !
Otherwise its Amd!
And i assume that you made this built which laying around parts.
So the build is okay otherwise you shouldn't but it
Man, people are really treating that GN AIO orientation video like that gospel, huh? Guess that’s why they call him Jesus
Yeah I only reference him here because everyone was so anal about it in my last video on this case which was intentionally done wrong to show you how to not build a pc in the 220T.
@@Alexkrastev fair enough, great vid
9600k bruh
Very good processor for gaming for the price especially when overclocked to 5Ghz
@@Alexkrastev Yea I agree with you
wtf 9600k bruh
Solid processor, strictly for gaming, especially when overclocked to 5Ghz. Got this one for only 160ish and that’s a killer price to performance. And best of all, it’s actually in stock. Lol
What is the maximum RAM height to install in this Corsair H100i case? Whether to put the A-Data XPG Spectrix D60G RGB ? Thanks !
It's 34mm with this case
The RAM he used in this video is 39mm so anything shorter than that should do
Use this ram but i want to use RGB version can do this
Will I be able to put H100X with vengeance LPX ram and MSI tomohawk b450 max motherboard?
I need to upgrade stock cooler with amd 3600 as it's noisy.
why dont you just get coolermaster or noctua cpu cooler, i do not think you need to have aio with 3600. and it is much easier to just look the dimensions.
Will my RAM fit if I wanna use the H115i? I'm using Corsair Vengeance RGB.
No, you might have clearance issues doing a top mount.
@@Alexkrastev ahh dang it. What about Corsair 4000x? Will it fit?
@@qotsafreak89 maybe a 4000d will work?
Does the ram Trident z rgb pass with corsair h100i rgb platinium?