Hi, may I ask you please what size of truss rod key for epiphone ej200sce do I need to buy? Any link? Thanks a lot for your lovely video, very helpful indeed!
Hello! I just got a new acoustic (A Seagull Entourage Rustic CW QI) and the top is starting to make some cracks. Is there any way I can get rid of the cracks? Or any advice? Thanks!
I think the guitar is getting too dry. What is the humidity in your place? If it is too dry, I would recommend you put in a case with humidifier inside. Cheers. Let me know how it goes.
_.erxcsn that shouldn't happen. Humidify the guitar right away! Always use a humidifier and keep it in a case. If you need to (like in your case) in an emergency where it is cracking, put some damp sponges (just lightly damp) and seal it I a plastic garbage bag for a few days. Just be careful to keep the sponges in the bag, but not directly touching the guitar. If you let it dry out too much, the bridge can snap off and destroy the top, frett board, etc.
Sir naka epiphone ej200 po ako.naka elixir gauge 12 yung gamit ko string,medyo matigas sya masakit s kamay.dapat po ba mag palit ako ng gauge or pa adjust ko po yung trussrod??
First thing, check mo muna kung ok ang setup. Check neck relief and action on 1st fret and 12th fret. Pag ok na setup, means, hindi mo kaya yung gauge 12, pwede ka bumaba sa gauge 11 (custom light). If I am not mistaken, medyo mataas frets ng Epiphone, kaya medyo masakit sa daliri.
Luthier na kailangan dyan. Minsan they separate fretboard para ma-straighten neck. Yung iba naman, iniinitan yung buong neck while under pressure. Pero mahal na gawin ito, minsan hindi na worth it.
Far too many turns. Turn only a half turn at a time and wait several hours for it to form and take it's shape before you can even measure out any difference. He probably later walked in on a broken guitar. I know as I once made the same mistake when I was uneducated. I would watch more videos if this is your first. Sorry buddy but I give a thumbs down
Thanks for your opinion. I agree with you. Yeah I suggest that viewers watch many other videos as I am not a guitar technician. Although, I have adjusted hundreds of guitars and no one got broken so far. How many have you done by the way?
@@Edwin-E I would have to locate my tally Wacker sheet.... The only thing I retract is saying half turns at a time as it should be even less and rather quarter turns. This message Edwin was for the viewers to your video in hopes that they don't learn from it I don't want to debate with you and let you try to convince people it's correct in any way. Far too many turns edwin. Again I was once uneducated also over this matter and turned even more. No hard feeling Edwin... Rock on
Hi, may I ask you please what size of truss rod key for epiphone ej200sce do I need to buy? Any link? Thanks a lot for your lovely video, very helpful indeed!
I am not sure for EJ200, I assume it would be same 4mm, but again, not sure. There are many online stores selling 4mm truss rod wrench. Good luck!
That was nice and simple. Thanks!
You're welcome!
Высота над 12 ладом достигается путем стачивания нижнего порожка.Анкер крутят, для прогиб грифа
How about if it’s a double truss rod like pro-1?
same procedure for double-action truss rod.
Thank you friend! I appreciate ❤
welcome. Thanks for watching.
does it have a sound if the rod accidentally snap?
yes.
Great explanation. Thank you very much.
You are welcome!
What is it a Takamine or an Epiphone AJ220SCE ?
Epiphone. I just made mistake saying Takamine in the video but I put text saying it is Epiphone.
Wow that's alot of turns tho.... I'm having problems with mine .. I'll try it thanks so if it's high.. turn right...low turn left? .. Thanks
if string is high, means neck bow inwards, then need to tighten truss rod, turn clock-wise.
thank you
You're welcome
thank you so much !
you're welcome
Hello! I just got a new acoustic (A Seagull Entourage Rustic CW QI) and the top is starting to make some cracks. Is there any way I can get rid of the cracks? Or any advice? Thanks!
I think the guitar is getting too dry. What is the humidity in your place? If it is too dry, I would recommend you put in a case with humidifier inside. Cheers. Let me know how it goes.
_.erxcsn that shouldn't happen. Humidify the guitar right away! Always use a humidifier and keep it in a case. If you need to (like in your case) in an emergency where it is cracking, put some damp sponges (just lightly damp) and seal it I a plastic garbage bag for a few days. Just be careful to keep the sponges in the bag, but not directly touching the guitar. If you let it dry out too much, the bridge can snap off and destroy the top, frett board, etc.
I have aj100ce.. will the method be same?
Some models have truss adjustment inside the sound hole. But the principle is the same, turn clock-wise to tighten, anti-clockwise to loosen.
Sir naka epiphone ej200 po ako.naka elixir gauge 12 yung gamit ko string,medyo matigas sya masakit s kamay.dapat po ba mag palit ako ng gauge or pa adjust ko po yung trussrod??
First thing, check mo muna kung ok ang setup. Check neck relief and action on 1st fret and 12th fret. Pag ok na setup, means, hindi mo kaya yung gauge 12, pwede ka bumaba sa gauge 11 (custom light). If I am not mistaken, medyo mataas frets ng Epiphone, kaya medyo masakit sa daliri.
saludos desde perú...yo tengo este modelo de guitarra...debo ajustar la guitarra...es nueva?
If the neck is bowed then you may need to adjust even if it is new.
Gracias lo tendré en cuenta...pero cómo saber eso?
No problem. Follow my steps in the video to check if the neck is straight. Cheers!
Pareho lang po ba sa epiphone pr 4e?
di ako sure. Although may cover sa headstock din ang PR 4E, most likely, same din.
Sir, ano po size ng string ang gamit nyo dito? Nka gauge 10 po kc ako n elixir. Ok lng po ba un? Thanks.
I cannot remember yung string na gamit ko. But usually, gauge 12. Minsan 11.
Paano po kapag sagad na yung pag ikot sa truss pero di parin straigth yung neck? Epiphone casino po
Luthier na kailangan dyan. Minsan they separate fretboard para ma-straighten neck. Yung iba naman, iniinitan yung buong neck while under pressure. Pero mahal na gawin ito, minsan hindi na worth it.
Edwin-E nakakalungkot naman paborito ko kasi casino ko
kapag iaadjust po ba ung truss rod dapat naka loosen po ba ung string o naka tune padn po??. thaks po :)
Before adjusting dapat naka tune ang guitar para tama ang tension ng strings.
Ahh ganun po ba. thank you po :)
Retune in between is more accurate
thanks for your recommendation.
kuya edwin magkano po yang guitar nyo?
This guitar retails around NZ$500 - 600.
Far too many turns. Turn only a half turn at a time and wait several hours for it to form and take it's shape before you can even measure out any difference. He probably later walked in on a broken guitar. I know as I once made the same mistake when I was uneducated. I would watch more videos if this is your first. Sorry buddy but I give a thumbs down
Thanks for your opinion. I agree with you. Yeah I suggest that viewers watch many other videos as I am not a guitar technician. Although, I have adjusted hundreds of guitars and no one got broken so far. How many have you done by the way?
@@Edwin-E I would have to locate my tally Wacker sheet.... The only thing I retract is saying half turns at a time as it should be even less and rather quarter turns. This message Edwin was for the viewers to your video in hopes that they don't learn from it I don't want to debate with you and let you try to convince people it's correct in any way. Far too many turns edwin. Again I was once uneducated also over this matter and turned even more. No hard feeling Edwin... Rock on
No worries. Thanks for our feedback anyways.
Thanks for your feedback I mean.
Dan Erliwine unstrings, clamps neck and then tightens the rod rather than using the rod to reset the neck thus not stressing the rod
Sir meron po ako neto regalo sakin. Dapat ko n di. Bang i adjust?
depende kung hindi straight ang neck, need to adjust.
thanks so much !
Welcome. Thanks too for watching. 😊👍