I began to notice after driving for a while My ABS and DSC lights come on till i remove my keys and start again on my E53 X5. This Video has been Helpful to show what the Problem can Be. I will try get my ABS sensors Checked and Replaced. I pray it Fixes the Error as it doesn't show any difference in my driving. I just don't like the Lights Coming On. Much Love from Nigeria
Clever lad. My 540i is mucking about ABS and DSC lights. I'll try this. It's at 128K miles and stuff is going wrong. FSU needs replacing, too. Still, I love the roar and acceleration. Thanks for clear video.
Appreciate the video, my 1998 E39 528i Abs is working and no lights or codes for it, the DSC light is on and I don't have traction control. Bmw couldn't give me a straight answer accept for maybe getting a whole new ECU. Any ideas?
Start with the simple check. Dsc has a fuse in the pannel, check that out, battery if is low will throw dsc error, abs sensor defect, hold dsc button at least 5 sec and after that press once or use inpa select dsc module and check for errors. Good luck 👍
You all probably dont give a damn but does anyone know of a trick to log back into an instagram account? I somehow lost the account password. I love any tricks you can give me.
@Damon Reginald I really appreciate your reply. I got to the site thru google and im trying it out now. Takes quite some time so I will reply here later when my account password hopefully is recovered.
not really! when u change the sensor and the error persist check the bearing surface that this sensor is using to read the wheel speed. that also can be a serious issue if the surface is not clean and plain. it’s not automatically necessary that the pump is dead
My E38 750 -97 just got ABS and DSC lights. Lights turned of after i shut down the car and lights up once i start driving over 30-40kmh. Speedometer and all the other gauges work. Cruise control doesn't work properly, it accelerates on it's own when I set the speed at let's say 90kmh. Any tips??
That might be just a bad abs sensor. The one in the rear left is giving you the speed so that one is working. You can scan the car to see exactly witch one. It might be a bad battery as well. If battery is low bmw will throw abs error first
@@WarpDriveM battery and alternator are fairly new. INPA showed " 15 pump error" as a stored fault code. The DSC compressor pump next to the brake booster spins when apply 12v directly. I haven't got any DSC and ABS lights on since it first came on a couple of days ago, the lights disappeared once I shut down the car and restarted. Cruise control only fails when the lights appeard.I have no idea if it's some bad wheel sensor or the unit behind the glove box. This makes my hair turn grey
The most fault is ABS module there is no cover for heat and module dead and need to be repair. In my bmw e39 abs module gone so if that not help you need to repair module
When I drive I get the traction control light flash and car judders dropping speed, when turn traction control of the car is fine but sometimes the two other lights come on, the abs and handbrake warning lights come on..When tried diagnostic nothing appears and the lights disappear when car is restarted... what could this be? Same issue as described in vid?
This is normal. Every time when your car loses traction while driving, abs kicks in and light comes on and is cutting power to the wheels. That's why when you turn it off the car won't judge's. Abs tries to keep it straight on the road. If your lights are on when the car is standing then you have an error. And it's normal to have abs light and brake light on. Is the same system.
I have almost same problem now suddenly, first the abs brakelight and the parkingbrakelight and the dsc light went on. Then after 1 day only dsc light is on and abs and speedo is working fine all the time. Any clue what mitht be the problem?
In your case might be the abs pump or the abs module. You have to test it with a scanner to be sure. Anyway I'm pretty sure that your abs module is toast....
qUantUmpants run an diagnostic. Often enough it's an sensor. More rarely the module, likely cause it's cooked by heat. If it light comes on when the engine id hot, your module is possibly defect
Usually the e39 has a problem with the abs pump itself because of the location near the exhaust it starts throwing codes. You have to check it with a scanner
That means that your abs pump is bad. Check first the fuse. If not you can send it to repair and you don't have to code it anymore. If you install a new or used one you have to code it or calibrate it
@@WarpDriveM everything else works fine speedo fuel guage temp guage ... when i start up the abs light doesnt go on than of it just stays of.... but the abs is working ..... strange thing ...when we read the codes and erase it the abs light stays on...than goes of but the asc always is on...also the handbrake loght is on and the hand brake isnt working at all at this moment
Sal. Am obs ca ai nr de AZ. lasmasina. Eu sunt din WI si de asemenea am un E39´97. as dori sa pot lua leg, cu tine ca se te intreb cate una alta. cum as putea lua leg cu tine?
i have the same problem. i changed all the wheel sensors. but the lights are there. and also bought a module from ebay used. and nothing has changed the lights still. what can i do? . its number can be wrong not for the moudule of my car. how can i know the basic number/.because when i bought my car the problem was . please if you can help me to take my ways. my car is e39 2001 525i mpaket
If the abs module fits your car it doesn't matter the number....it can be newer no problem but it has to be vin coded for your car that's way you still have the lights on.
@@WarpDriveM i make al things . when i try ing to coding the vin on the abs its coming problem . i am using INPA NCS . and still . my car is ASC system and the module maybe DSC sytem is there a different . ?
To find out which one is not working you have to test the car. The rear left one is the one that sends the speed to the computer. Most likely that's the one
Hello I have a BMW E46 318i and my ABS / DSC lights are on. I tried your method by replacing both of the front ABS sensors but afterwards these two lights remain on even I drive for some distance. All the other gauges are working fine, just the ABS & DSC lights are on. Any clues how i can further fix this?
First you have to check which one is bad wit a scanner. The rear left one is sending the speed to computer and in most o the cases that one goes bad. If you replaced the sensors and the lights are still there then probably your problem is the abs pump
Warp Drive Thanks for your reply. My speedometer is working fine, instant fuel consumption gauge also working fine, basically everything is working well except the DSC & ABS lights are on. This is why I tried to change the front abs sensors to see if it works, The scanner did say it’s the DSC pump that had problem. But I just figure changing that would cost much more money and with your video and many other comments saying replacing the abs sensors would most probably have the problem fixed. Would you suggest I do another replacement on rear abs sensors or would you suggest I go ahead to target the abs pump? Any idea what might went wrong with the abs pump and is replacing a new abs pump the only solution?
In cazul tau e modulul de pe pompa de abs. Dacă de obicei se aprinde cand e cald motorul 100% e modulul. Oricum trebuie testată sau poți schimba senzorul de la roata stângă spate si in cazul in care se reaprinde atunci e clar modulul.
Posibil sa nu ai nici un defect. Dsc se aprinde de fiecare dată când roțile din spate patineaza/alunecă. Dacă pleci cu patinare de roți o sa vezi ca dsc luminează indiferent daca e vara sau iarna. Dacă se aprind mai multe becuri galbene decât dsc atunci e o problemă cu modulul abs.
@@WarpDriveM How do I know the right wheel? The steering angle sensor error in my car showed. I replaced the steering angle sensor. but the fault has not changed. ??? only my DSC lamp is on in my car.
@@VadininHayaletleri you have to reset the steering angle sensor. With engine on go full lock left and full lock right and this will reset the steering sensor. For dsc error you have to scan the car. It might be a sensor, it might be low battery, a fuse even the pump...
That's the main problem on this cars. Because of the heat from the manifold it starts to melt the connection inside. If you have an earlier model you can repair it yourself (search on Google or TH-cam) if you have the facelift model you can't repair it at home because it isn't with solder anymore
I began to notice after driving for a while My ABS and DSC lights come on till i remove my keys and start again on my E53 X5. This Video has been Helpful to show what the Problem can Be. I will try get my ABS sensors Checked and Replaced. I pray it Fixes the Error as it doesn't show any difference in my driving. I just don't like the Lights Coming On. Much Love from Nigeria
I have the same problem what was the Problem?
@@serhaterdem5355 I changed the sensor and everything was fine.
@@oloruntosinkinyomi9562 what sensor
Clever lad. My 540i is mucking about ABS and DSC lights. I'll try this. It's at 128K miles and stuff is going wrong. FSU needs replacing, too. Still, I love the roar and acceleration. Thanks for clear video.
wat happened
What the tool box
Appreciate the video, my 1998 E39 528i Abs is working and no lights or codes for it, the DSC light is on and I don't have traction control. Bmw couldn't give me a straight answer accept for maybe getting a whole new ECU. Any ideas?
Start with the simple check. Dsc has a fuse in the pannel, check that out, battery if is low will throw dsc error, abs sensor defect, hold dsc button at least 5 sec and after that press once or use inpa select dsc module and check for errors. Good luck 👍
Easy 👍. Two variant . Cable sensor or ABS block chip.
You all probably dont give a damn but does anyone know of a trick to log back into an instagram account?
I somehow lost the account password. I love any tricks you can give me.
@Marcelo Jamari Instablaster :)
@Damon Reginald I really appreciate your reply. I got to the site thru google and im trying it out now.
Takes quite some time so I will reply here later when my account password hopefully is recovered.
@Damon Reginald it worked and I now got access to my account again. Im so happy!
Thank you so much, you saved my account!
@Marcelo Jamari you are welcome :)
What about the speedometer? Is it back to normaly?
Hello, out of curiosity, I know, maybe what should be the resistance on the ABS sensor?
It probably just the speed sensor. I just swapped my abs speed sensor in the back and now boom! No error code
عمل رائع ..لغتك الانجليزيه واضحة ومفهومة...شكرا لك... من العراق
Thanks from France ! ^^
not really! when u change the sensor and the error persist check the bearing surface that this sensor is using to read the wheel speed. that also can be a serious issue if the surface is not clean and plain. it’s not automatically necessary that the pump is dead
Did you scan it first to know which one of the abs sensor was defective?
I think I've scanned it but the rear left one on this model is always the one that send speed info to abs and cluster
Thanks, how you know if that wheel or other wheel have that problem?
Becase the left wheel in the back sensor sends the speed signal on this car. Or you can scan it with a scanner
My E38 750 -97 just got ABS and DSC lights. Lights turned of after i shut down the car and lights up once i start driving over 30-40kmh. Speedometer and all the other gauges work. Cruise control doesn't work properly, it accelerates on it's own when I set the speed at let's say 90kmh. Any tips??
That might be just a bad abs sensor. The one in the rear left is giving you the speed so that one is working. You can scan the car to see exactly witch one. It might be a bad battery as well. If battery is low bmw will throw abs error first
@@WarpDriveM battery and alternator are fairly new. INPA showed " 15 pump error" as a stored fault code. The DSC compressor pump next to the brake booster spins when apply 12v directly. I haven't got any DSC and ABS lights on since it first came on a couple of days ago, the lights disappeared once I shut down the car and restarted. Cruise control only fails when the lights appeard.I have no idea if it's some bad wheel sensor or the unit behind the glove box. This makes my hair turn grey
The most fault is ABS module there is no cover for heat and module dead and need to be repair. In my bmw e39 abs module gone so if that not help you need to repair module
Did that issue cause your car to stall after heating to proper temp? I hear that module burns out now my 525 keeps stalling in traffic
Abs sensor, yea? Love your accent 😂
Hello, does dtc prevent the transmission from changing gears and staying in first gear?
Sorry dsc light
No it doesnt, even the cruise control will work
It will prevent it to change gears if is always on and off (blinks on the dash)
When I drive I get the traction control light flash and car judders dropping speed, when turn traction control of the car is fine but sometimes the two other lights come on, the abs and handbrake warning lights come on..When tried diagnostic nothing appears and the lights disappear when car is restarted... what could this be? Same issue as described in vid?
This is normal. Every time when your car loses traction while driving, abs kicks in and light comes on and is cutting power to the wheels. That's why when you turn it off the car won't judge's. Abs tries to keep it straight on the road. If your lights are on when the car is standing then you have an error. And it's normal to have abs light and brake light on. Is the same system.
I have almost same problem now suddenly, first the abs brakelight and the parkingbrakelight and the dsc light went on. Then after 1 day only dsc light is on and abs and speedo is working fine all the time. Any clue what mitht be the problem?
In your case might be the abs pump or the abs module. You have to test it with a scanner to be sure. Anyway I'm pretty sure that your abs module is toast....
Warp Drive M okay i will do that. Thanks for answer:)
qUantUmpants run an diagnostic. Often enough it's an sensor. More rarely the module, likely cause it's cooked by heat. If it light comes on when the engine id hot, your module is possibly defect
Good job dude.
I replaced all 4 sensors new and light Stays off for a few minutes and then it randomly comes on and stays on. Anything else I should check forv
Usually the e39 has a problem with the abs pump itself because of the location near the exhaust it starts throwing codes. You have to check it with a scanner
Warp Drive M I understand. Thanks for you help mate! Great video. I will have that checked.
My friend .... i have e39 520i 1996... asc isnt working ..... abs is working ....on scan it says the abs module not saying any sensor
That means that your abs pump is bad. Check first the fuse. If not you can send it to repair and you don't have to code it anymore. If you install a new or used one you have to code it or calibrate it
@@WarpDriveM everything else works fine speedo fuel guage temp guage ... when i start up the abs light doesnt go on than of it just stays of.... but the abs is working ..... strange thing ...when we read the codes and erase it the abs light stays on...than goes of but the asc always is on...also the handbrake loght is on and the hand brake isnt working at all at this moment
hello i have a question
Sal. Am obs ca ai nr de AZ. lasmasina. Eu sunt din WI si de asemenea am un E39´97. as dori sa pot lua leg, cu tine ca se te intreb cate una alta. cum as putea lua leg cu tine?
Thanks a lot.
Thank you brother!
Thank you for this video
thank you for the video brother, thumbs up
Hi . the baq left abs sensors problems
😉
i have the same problem. i changed all the wheel sensors. but the lights are there. and also bought a module from ebay used. and nothing has changed the lights still. what can i do? . its number can be wrong not for the moudule of my car. how can i know the basic number/.because when i bought my car the problem was . please if you can help me to take my ways.
my car is e39 2001 525i mpaket
If the abs module fits your car it doesn't matter the number....it can be newer no problem but it has to be vin coded for your car that's way you still have the lights on.
@@WarpDriveM i make al things . when i try ing to coding the vin on the abs its coming problem . i am using INPA NCS . and still . my car is ASC system and the module maybe DSC sytem is there a different . ?
thank you man
Thank You
Who can you know which one is no working?
To find out which one is not working you have to test the car. The rear left one is the one that sends the speed to the computer. Most likely that's the one
Hello
I have a BMW E46 318i and my ABS / DSC lights are on. I tried your method by replacing both of the front ABS sensors but afterwards these two lights remain on even I drive for some distance.
All the other gauges are working fine, just the ABS & DSC lights are on.
Any clues how i can further fix this?
First you have to check which one is bad wit a scanner. The rear left one is sending the speed to computer and in most o the cases that one goes bad. If you replaced the sensors and the lights are still there then probably your problem is the abs pump
Warp Drive Thanks for your reply. My speedometer is working fine, instant fuel consumption gauge also working fine, basically everything is working well except the DSC & ABS lights are on. This is why I tried to change the front abs sensors to see if it works, The scanner did say it’s the DSC pump that had problem. But I just figure changing that would cost much more money and with your video and many other comments saying replacing the abs sensors would most probably have the problem fixed. Would you suggest I do another replacement on rear abs sensors or would you suggest I go ahead to target the abs pump? Any idea what might went wrong with the abs pump and is replacing a new abs pump the only solution?
@@40912philip I did all this in video and I changed the pump,,, the lights remain on
@@WarpDriveM I did all this in video and I changed the pump,,, the lights remain on
Perfekt!👍👌
Si la mine se aprinde câteodată și după ceva timp se stinge ce poate sa fie?🤔
In cazul tau e modulul de pe pompa de abs. Dacă de obicei se aprinde cand e cald motorul 100% e modulul. Oricum trebuie testată sau poți schimba senzorul de la roata stângă spate si in cazul in care se reaprinde atunci e clar modulul.
Se aprinde doar când motorul rece
De când an început frigul aici a și nins
Posibil sa nu ai nici un defect. Dsc se aprinde de fiecare dată când roțile din spate patineaza/alunecă. Dacă pleci cu patinare de roți o sa vezi ca dsc luminează indiferent daca e vara sau iarna. Dacă se aprind mai multe becuri galbene decât dsc atunci e o problemă cu modulul abs.
Good bro ..thanks..
What size engine?
It has a 2.5 l engine M54
Cable ? What name cable? DSC?
Abs sensor this is the name of the piece. It came with cable. You just have to order for the right wheel
@@WarpDriveM
How do I know the right wheel? The steering angle sensor error in my car showed. I replaced the steering angle sensor. but the fault has not changed. ???
only my DSC lamp is on in my car.
?????
@@VadininHayaletleri you have to reset the steering angle sensor. With engine on go full lock left and full lock right and this will reset the steering sensor. For dsc error you have to scan the car. It might be a sensor, it might be low battery, a fuse even the pump...
Didnt work for me. ABS light is still on
This means that the abs pump is bad....
Job Done!!
on Diesel the is no bolt
price .. thank y ,,, LIBYA 🇱🇾
18 pluse gears e39 525i
abs gels with girma marks
Yes turkey
You never drive the car to us if the speedo is working
My abs module becomes nuclear hot....then the lights trip....
That's the main problem on this cars. Because of the heat from the manifold it starts to melt the connection inside. If you have an earlier model you can repair it yourself (search on Google or TH-cam) if you have the facelift model you can't repair it at home because it isn't with solder anymore
Yeah.....a LOT of heat....I did notice that the whole engine bay was wayyyyy hotter than it has since i bought the car new in 03.
Io chelo qosto problema
Nici nu ești roman 😂🇷🇴🇹🇩