Lol, you stood clear of the oxygen regulator valve when u opened the cylinder valve but when u opened the acetylene cylinder valve the regulator valve was pointing straight at your face. Nice safety video.
My torches ride in my service truck and the back isn’t heated. Never had any issues with them not working. Toughest thing is in cold weather it’s just takes a little longer to warm the metal up you’re working on.
I’m getting ready to buy one of these rigs from eBay or Amazon to melt gold and silver. When I go fill up these tanks will the company take them away from me and give me their crappy ones or will they just fill them up for me?
I can never get this to work. My flame is either too big/long to fit in tight spaces or too cold to braze copper or too hot and cuts holes in the copper.. i have the Bromic brazing kit. A work mate of mine was able to make a TINY flame which was able to perfectly melt and seal solder to copper in under 20 seconds
Just saying, your picture that comes up on TH-cam advertising this episode shows the flame from the torch pointing right at the tank and regulator assemblies. Not a good look. I'd change it.
If you read the manual for that victor set it says 5 psi for oxygen and 5 psi for acetylene. Maybe follow the manufacturer instead of some jackass on youtube. No way in hell you need 7/10 on a baby brazing tip
Ran 7/10 for years with no issue on this set as well as many others. The important thing is getting to a neutral flame. 5/5 probably would work just fine. I’m usually running a triple tip when doing work, so you are pushing a little more fuel than this 0 currently on this setup.
If cylinders are tipped more than 15 degrees the acetone can be drawn out with the acetylene and the flame will sputter. Without the acetone creating a composition in the tank, acetylene will explode at over 15 psi. Here is a link to an article discussing the specific of acetylene storage and usage. ehrs.upenn.edu/sites/default/files/2018-02/Acetylene%20Fact%20Sheet.pdf
Best video on TH-cam explaining oxy acetylene correct practice steps
Thank you for the kind words!
Great vid. Easy instructions. And detailed
Good job! Thanks
Good video thanks
Nice! What is the chain actually for?
Lol, you stood clear of the oxygen regulator valve when u opened the cylinder valve but when u opened the acetylene cylinder valve the regulator valve was pointing straight at your face. Nice safety video.
Acetylene is low pressure
Enjoyed video.
Glad to hear it!
Question do you know if i can leave my torch setup in my shed without insulation or is that to cold
My torches ride in my service truck and the back isn’t heated. Never had any issues with them not working. Toughest thing is in cold weather it’s just takes a little longer to warm the metal up you’re working on.
@@dunhamservice literally a thanks man!
@@dunhamservice I'm happy got my torch running
I’m getting ready to buy one of these rigs from eBay or Amazon to melt gold and silver. When I go fill up these tanks will the company take them away from me and give me their crappy ones or will they just fill them up for me?
They take the tank and whatever is in your pockets. They will also need your ccv number and social security number.
Please inform how many prices in this
Got a link to brazing video?
th-cam.com/video/5FEhaceHhWI/w-d-xo.htmlsi=VclNRXSr1x6mqk5w
I can never get this to work. My flame is either too big/long to fit in tight spaces or too cold to braze copper or too hot and cuts holes in the copper.. i have the Bromic brazing kit. A work mate of mine was able to make a TINY flame which was able to perfectly melt and seal solder to copper in under 20 seconds
How much
Just saying, your picture that comes up on TH-cam advertising this episode shows the flame from the torch pointing right at the tank and regulator assemblies. Not a good look. I'd change it.
That is a great catch, TH-cam just grabbed an image from the video. This was one of our first videos before we knew about custom thumbnails.
@11:48, it looks like hes trying to make a tictoc video titled, "we torch an oxygen tank for likes".
👍🏾👍🏾✌🏾
@7:51 exuse me not 10 lbs of pressure!!!! This guy!
If you read the manual for that victor set it says 5 psi for oxygen and 5 psi for acetylene.
Maybe follow the manufacturer instead of some jackass on youtube. No way in hell you need 7/10 on a baby brazing tip
Ran 7/10 for years with no issue on this set as well as many others. The important thing is getting to a neutral flame. 5/5 probably would work just fine. I’m usually running a triple tip when doing work, so you are pushing a little more fuel than this 0 currently on this setup.
If it’s over 15 it’s not gonna blow up it will start drawing out that acetone and it will come out of the tip
If cylinders are tipped more than 15 degrees the acetone can be drawn out with the acetylene and the flame will sputter. Without the acetone creating a composition in the tank, acetylene will explode at over 15 psi. Here is a link to an article discussing the specific of acetylene storage and usage. ehrs.upenn.edu/sites/default/files/2018-02/Acetylene%20Fact%20Sheet.pdf