Mitsubishi lancer CE 4g93 fuel filter replacement.

แชร์
ฝัง
  • เผยแพร่เมื่อ 1 ม.ค. 2025
  • Hello everyone. This video involves the replacement of the fuel filter on a 99 model CE Lancer. This might also help the owners of MR Lancers and Mirages or other makes and models with similar fuel filter setups. Enjoy and please let me know if i have missed something.
    Thank you.

ความคิดเห็น •

  • @morgs8563
    @morgs8563 5 ปีที่แล้ว +5

    Thanks for the awesome video mate. I did come across one problem though, I could not get the bottom bolt off without A LOT of hard work.
    Some tips who are experiencing the same problem.
    BEFORE REMOVING BOTTOM BOLT
    -Lubricate the bolt with some break fluid
    -loosen the 12mm bolts on the housing bracket (done at 7:35) in this video
    -Use two wrenches in the "V-formation" to crack the bolt.
    -Dont get too carried away. Fuel lines will break. So care!

  • @worghal
    @worghal 6 ปีที่แล้ว +9

    you are my hero! i recently got a 99 lancer and there is absolutely nothing about it online!

    • @cheetahgaming3642
      @cheetahgaming3642 5 ปีที่แล้ว +1

      just go to auslancer...

    • @ScottyHugefellow
      @ScottyHugefellow 3 ปีที่แล้ว

      Check out the encap safety crash tests on youtube. These cars are dangerous

    • @1967KID
      @1967KID ปีที่แล้ว

      My wife got a 2004 lancer es i just put a new fuel pump and filter it's under the back seat and it was easy, fuse 15a last from front and disconnect the battery.

  • @scottmordecai482
    @scottmordecai482 3 ปีที่แล้ว

    As a newbie mechanic, videos like this are really helpful. Thanks for making it. Cheers 👍

  • @zoehutchison4708
    @zoehutchison4708 4 ปีที่แล้ว +1

    Very similar to my '94 Toyota Corolla..identical fuel filter. I found the bottom inlet line was much easier to line the threads up before the jacket housing was attached to the vehicle. The inlet line is made of metal and can crimp easily..much easier to move the filter so that it lines up to the position of bottom housing nut then fix the assembly to vehicle body. I would recommend the way you did it from beneath as less chance of damaging the line.

  • @DCamach
    @DCamach 5 ปีที่แล้ว +2

    thank you so much for sharing that.. I've a 98 Colt GLX and theres nothing on the web for our old cars..

  • @ThingsThatIDo
    @ThingsThatIDo ปีที่แล้ว

    Before you even start I would highly recommend that you spray both of the bolts down with PB Blaster, liquid wrench, or something like that and let it set for a day or so. That should make the whole thing a little bit easier

  • @adamthorn3697
    @adamthorn3697 4 ปีที่แล้ว

    Great video with step by step instructions 👍 small project for me to do while NZ is on isolation hahah

  • @I_RacooN_I
    @I_RacooN_I 11 หลายเดือนก่อน

    your a bloody legend.

  • @ahliaolley7525
    @ahliaolley7525 2 ปีที่แล้ว

    Thank you so much for this!!!!!

  • @apple-on5pq
    @apple-on5pq 5 ปีที่แล้ว

    Crazy position to locate the fuel filter

  • @exedracs4029
    @exedracs4029 6 ปีที่แล้ว

    Nice video mate. Helped a lot.

  • @kevinmath007
    @kevinmath007 5 ปีที่แล้ว

    Very helpful video mate cheers

  • @sherylwickham8862
    @sherylwickham8862 5 ปีที่แล้ว

    Good video Benny

  • @rajvirhara9179
    @rajvirhara9179 4 ปีที่แล้ว +2

    what difference did you feel after changing fuel filter like fuel efficiency or power?

    • @ScottyHugefellow
      @ScottyHugefellow 3 ปีที่แล้ว

      Depends if there is rust or gooey shit in the system, you'll feel a difference from cleaning injectors

    • @ryanwalter757
      @ryanwalter757 3 ปีที่แล้ว

      If you've got a dirty fuel filter you would definitely notice a big difference the power will come come on a lot stronger and you won't be lagging up steep hills

  • @hohoming8
    @hohoming8 6 ปีที่แล้ว +2

    Bro, can you do an oil filter and fuel pump replacement video for Lancer CE as well???

    • @Isdersumfinwong
      @Isdersumfinwong  6 ปีที่แล้ว

      I think i have recorded one but if not next change I'll have one for ya.

    • @Isdersumfinwong
      @Isdersumfinwong  6 ปีที่แล้ว +2

      Found it mate.
      th-cam.com/video/8Jv86wmNgGI/w-d-xo.html

  • @chamilpsr
    @chamilpsr 3 ปีที่แล้ว

    Tried my lancer CE GLI coupe. New one was Silverline ff51SL from Repco. Leaked from the bottom again and again. There were 3 washers 3 rd one was smaller. But all were very flimsy. Any way because of the leaking hastily put the old one again without the housing. Going for the garage tomorrow. Why leaking from the bottom. I fastened the bottom nut as much as it put a mark on the new fuel filter bottom.

    • @TEKOSTUFF
      @TEKOSTUFF 3 ปีที่แล้ว

      Hi, Exact same thing happened to me... Used Silverline fuel filter and it is leaking. One mechanic suggested to use Ryco filter and try again...

  • @MB-xb8ef
    @MB-xb8ef 4 ปีที่แล้ว

    Hey man on the charcoal filter. That last air line is not meant to have a hose yeah? I just done some work on mine and figured I had a hose missing?

  • @JRM6Seinscrevanocanaljrm6
    @JRM6Seinscrevanocanaljrm6 4 ปีที่แล้ว

    Logo quando você tirou o aperto do primeiro parafuso que puxou a mangueira, caiu o anel de vedação. Esses aneis de cobre perde facil e o posicionamento desse filtro não ajuda muito.

  • @rohyau
    @rohyau 5 หลายเดือนก่อน

    hey where’s the fuel pump?

  • @newgetpopz81
    @newgetpopz81 5 ปีที่แล้ว

    Is it a flare nut by any chance? (2000 mirage) that bolt was way too Hard to get off

  • @albertogarita6644
    @albertogarita6644 3 ปีที่แล้ว +1

    que hace este video en inglés aqui

  • @adwegaming8882
    @adwegaming8882 4 ปีที่แล้ว

    tried changing the filter in my mates 93 lancer and the bottom line leaked again and again and again! even if i put the old one back in it still leaked and leaked so we gave up on it for today.

  • @madalynporter9053
    @madalynporter9053 5 ปีที่แล้ว

    Thank you!

  • @marteneqdt
    @marteneqdt 5 ปีที่แล้ว

    Hi,
    Was there something wrong with the car, and if there was, what was the problem.
    Or was this just a routine service procedure?
    M

    • @kiyoponnn
      @kiyoponnn 5 ปีที่แล้ว

      Probably poor acceleration, fuel filters generally last quite a while

  • @lewisbrown1052
    @lewisbrown1052 4 ปีที่แล้ว

    Just tried mine tonight but it keeps on leaking. Any ideas?

    • @JRM6Seinscrevanocanaljrm6
      @JRM6Seinscrevanocanaljrm6 4 ปีที่แล้ว

      Vazando aonde ? no parafuso ? veja se não é o anel de cobre de vedação

  • @HAMLETM3
    @HAMLETM3 6 ปีที่แล้ว

    very good!

  • @amitupadhye836
    @amitupadhye836 4 ปีที่แล้ว

    Pls send link petrol filter 2001 model

  • @ruudramlogan9325
    @ruudramlogan9325 5 ปีที่แล้ว

    Where could I find fuel pump

    • @cheetahgaming3642
      @cheetahgaming3642 5 ปีที่แล้ว

      under the backseat... theres a small cover that pops off under there and your fuel pump assembely is in there... or you can just drop the tank

    • @franketas
      @franketas 5 ปีที่แล้ว

      CheetahSpeed That cover is for fuel assembly only you need to drop the gas tank to see another cover by side and there the gas pump.

  • @avocadomangos
    @avocadomangos 6 ปีที่แล้ว

    Why would you change it?

    • @cheetahgaming3642
      @cheetahgaming3642 5 ปีที่แล้ว

      they get dirty and clogged after a long time... and fuel doesnt flow through it especially at high rpms

  • @summerchiang9355
    @summerchiang9355 6 ปีที่แล้ว

    Hi, I just change my proton wira fuel filter (Malaysia), the fuel filter is same with your Mitsubishi Lanser. The fuel filter at my car not easy to be dismantle. Make this replacement spent 2hours.

    • @kiyoponnn
      @kiyoponnn 5 ปีที่แล้ว

      4G63 is a strong engine

  • @rampage3337
    @rampage3337 4 ปีที่แล้ว

    oh god why the fuck did they have to make that shit so complicated? not evem my bmw e46 had that kind of complicated filter that was placed in such a shity place

  • @stringz6554
    @stringz6554 6 ปีที่แล้ว

    i tried doing this by myself and have snapped the fuel line lol FML

    • @Isdersumfinwong
      @Isdersumfinwong  6 ปีที่แล้ว

      It is an absolute headache.. sorry to hear bro. Hopefully you had a win with it afterwards

    • @stringz6554
      @stringz6554 6 ปีที่แล้ว

      benny kimchi I got creative to fix the fuel line so my lancer still runs :) thanks for the video though man it was really informative. This would have been much easier if I had a hoist

    • @TEKOSTUFF
      @TEKOSTUFF 3 ปีที่แล้ว +1

      @@stringz6554 How did you fixed the fuel line?

    • @stringz6554
      @stringz6554 3 ปีที่แล้ว

      @@TEKOSTUFF had to flare the ends and used heavy duty rubber hosing to connect with 2 clamps on each end. A little dodgy, but it worked.