So I finally put together my PC. Found an EVGA 3080 at MSRP and had a hero VIIi motherboard. A few differences but I figured it out. This video got me through the build. Thanks again for posting this. Great job. My PC runs beautifully.
@@Graphics_Card the 7000D is a full-tower with a volume of around 80 liters... Definitely not what you see in almost every computer. Mid-towers are more common with around 40liters in volume. I personally own a Dan-A4, which is a SFF case with a volume of 7 liters, making this case absolutely gigantic in comparison.
Superb! I will be building my first new PC for 13 years this weekend in this very case! It seems a bit over designed with lots of steel that doesn't need to be there, but it is still glorious! :) I think that's the same motherboard I ordered too!
Nice build all the way around, Dark Hero is THE motherboard! Liked the cable extensions! Corsair stuff is great. Great job! AMD should give you a nice shirt to wear during your AMD builds, yeah?
Thank you, I completed my build, but my tuf rx 7900 xtx is massive to fit in tuf gt502 and vertically is causing heat to mb, so I got 7000d. Your video helped me a lot😊
This is the exact build I’m going for. Not the Dark hero but the hero viii. It’s like TH-cam read my mind, or maybe great minds think a like. Thanks for the vid.
Great build. Your next upgrade should be a custom Water loop for it. Cooling GPU and CPU. I'm going to build one in this case soon. Probably when the new RTX GPU release
for those who want the full front io capability, NZXT's motherboard has a usb-c plug in and 2 usb 2.0 ports at right angles to be able to use all 4 front usb's
I just picked up the 7000X and built a really good pc for my older sister it packs an i5 12600K, RTx 3070 TI Gigabyte OC, 16gb 4800MHZ DDR5 a stunning z690-A,
It can get a bit hairy, especially first time. But a bit of planning and making sure you have all the right parts that are supported by each other will make it go smoother. Expect the assembly to take several hours when you're new. Heck, I'm done it many times and I still take my time, never rush. Watch a lot of videos ahead and check for ones using your specific case, psu, mobo whatever. Measure twice, cut once, is the best rule of thumb for most anything in life, especially tech.
Amazing work as always, I think I will change my rog helios strix case in the future for either the 5000d or the 7000d because my airflow is not good thanks to the design of the helios strix case I mean my temps are okay but they could be better with a top tier mesh case like this one. Keep up the good work man 👍🏼
Thanks very much mate, late comment but I was mainly looking at the case and then you showed the MOBO I’m getting and I was worried it didn’t have a m.2 but after seeing it does I’ll be buying it
Great video. I was looking for someone who has built my same build I'm getting to do or very close to it and this is the closest I've found. I'm using same case (also black) and same CPU cooler. MSI mobo, i9 CPU, also using 4 sticks of RAM (4x32gb for 128 total), and an MSI 4090 RTX. Super excited to build it and this video will go a long way in helping guide me along.
Just got one, the wiring is a little confusing for me...so trying to find a really good wiring video.. but the case is great so far temps on my CPU dropped by 7-10 degrees.
Hi, very clean job first of all, i want to ask something, are you able to use usb hub top of the case cause you connect commander node's usb and rgb hub's usb, as far as i know there is one usb 2.0 connection for the case usb ports but there is only 2 usb 2.0 9pin port on the motherboard, how did you manage this problem? By not to connecting case usb 2.0 or what? I hope i could explain what i mean clearly.
Would also really like to know. Corsair says only 4x more 120mm fans on side but I read someone managed to put 3 more 140mm. Guess maby also depends on radiator size
Thought you need only one control... Panel? For corsair fans. Sorry, I'm still new to the pc world. And trying to keep my mind fresh when it comes to building pc.
El aparato donde empieza a conectar en el 7:12,¿es el que ya viene en el case cierto? Pienso escoger el CORSAIR 7000D por un video que vi pero en este tenia los fan de 120mm, 2 kit de 4 de 120mm y 1 de 120 o 140mm en la parte trasera, revisando el precio salia algo mas de lo que pensaba, pero creo que con los 140mm quedaria bien, se ve bien en este video y al verlo me anime a armarla yo mismo.
Volviendolo a ver, estoy confundido en la parte donde conecta las entradas de los FAN, son 7 en total no? En el 1ro conecta 4, en el 2do 4 y en el 3ro 7
Love this vid, i've brought a similar build to this just the 5000 series version. I can see that you didn't put the top dust filter back on, is that due to the fans being an exhaust or...
Another great build from one of my favorite TH-cam PC builders. I have learned so much watching you. Looking forward to the next one.
Wow thank you I really appreciate it
Totally gonna upgrade to this case for a upcoming alderlake hopefully HOPEFULLY rtx 3070 next spring. :)
the time has arrived child. have you got the 3070
😂😂😂@@saab409
It's not just the build itself is clean but also the way you built it. Excellent job as always.
So I finally put together my PC. Found an EVGA 3080 at MSRP and had a hero VIIi motherboard. A few differences but I figured it out. This video got me through the build. Thanks again for posting this. Great job. My PC runs beautifully.
Man I really enjoyed watching this video! The closeup slider shots and flow is really satisfying to watch. Keep it up.
I don't like those big towers but you've done an extremly good job
Uhh, those are what you see in almost every computer
@@Graphics_Card uhm no
@@unknown81360 so no atx mid towers are available in your country? That’s literally a normal sized computer
@@Graphics_Card dude the 7000 is a very large case lol
@@Graphics_Card the 7000D is a full-tower with a volume of around 80 liters... Definitely not what you see in almost every computer.
Mid-towers are more common with around 40liters in volume.
I personally own a Dan-A4, which is a SFF case with a volume of 7 liters, making this case absolutely gigantic in comparison.
Probably the best PC build which I can refer to while building my own. Kudos!!!
Superb! I will be building my first new PC for 13 years this weekend in this very case! It seems a bit over designed with lots of steel that doesn't need to be there, but it is still glorious! :) I think that's the same motherboard I ordered too!
how did it go?
Your story is similar to mine - I built one about 2yrs ago which was my first since the late '00s! PCs have changed a lot, haven't they :)
@@Shadowguy456234 Haven't they just!
u sir have the art of making pc
Nice build all the way around, Dark Hero is THE motherboard! Liked the cable extensions! Corsair stuff is great. Great job! AMD should give you a nice shirt to wear during your AMD builds, yeah?
this is what im actually getting and the install video on the parts are clean and dope! Great build!
I didn't know about the Universal GPU holder until I saw this video. Thank you.
I was trying to decide on what case and set up to build next and this has helped a lot. Now to tweak my selection.
I did the same, moving the front fans all the way up in my 7000X build! :)
Smashed it yet again, could watch you build rigs all day
Absolutly stunning! It's really meditating watching thesr kinds of videos, great job!
This is pretty much identical to the build I just specd out for my next pc. haha awesome to see it built.
I love this video. Based on that, I built my dream PC. Many thanks for this video.
You made that look so easy lol. I have the 5000D and I thought that was big, the 7000D looks huge!
Thank you, I completed my build, but my tuf rx 7900 xtx is massive to fit in tuf gt502 and vertically is causing heat to mb, so I got 7000d. Your video helped me a lot😊
Came across your channel and it is so satisfying to watch. It makes me want to start gaming.
Nice build, I´m waiting for my 7000D to arrive! This case is a monster! 👽👽
I'm never gonna get used to itx builds without bays for optical goodness... I need my 3 blu-ray writers!
this huge GPU looks tiny in this case, amazing!
Yes mom, I need this for school 👀
he is doing my cable management now.
Yay another montage, gonna take a seat, and enjoy the whole vid
Great photography. Great music. Clean building. 👍🏾
Satisfação de assistir viu.. ta de parabéns 👏🏼
Amazing mate, in love with this build 🤍🤍🤍
This is the exact build I’m going for. Not the Dark hero but the hero viii. It’s like TH-cam read my mind, or maybe great minds think a like. Thanks for the vid.
Great build. Your next upgrade should be a custom Water loop for it. Cooling GPU and CPU. I'm going to build one in this case soon. Probably when the new RTX GPU release
I love to watch these videos, and I wish I would build PCs for a living
you speak out of my mind
Yeah sounds like the life
I just built my new PC using the case! I used RX 7900 XTX 24 GIG GPU with the Ryzen 7 7800X3D CPU!
love watching the sick builds man
I am building my PC which has the similar components same as yours. This video helps me a lots. Thanks.
for those who want the full front io capability, NZXT's motherboard has a usb-c plug in and 2 usb 2.0 ports at right angles to be able to use all 4 front usb's
NZXT is a scam don’t buy them.
wow, what a build. Only in a dream does this happen
Great video, nice build, like the telescopic GPU support (thumb up)
Great stuff man, clean build as always.
I just picked up the 7000X and built a really good pc for my older sister it packs an i5 12600K, RTx 3070 TI Gigabyte OC, 16gb 4800MHZ DDR5 a stunning z690-A,
sick build
🔥🔥🔥
Made it look so easy! I’m thinking about building my very first computer but the wiring seems complicated. Im scared to screw it up.
It can get a bit hairy, especially first time. But a bit of planning and making sure you have all the right parts that are supported by each other will make it go smoother.
Expect the assembly to take several hours when you're new. Heck, I'm done it many times and I still take my time, never rush.
Watch a lot of videos ahead and check for ones using your specific case, psu, mobo whatever. Measure twice, cut once, is the best rule of thumb for most anything in life, especially tech.
@@dubbleplusgood built it about 6 months ago. This video among many was what I used to prepare. Went perfectly fine on the first try.
Amazing work as always, I think I will change my rog helios strix case in the future for either the 5000d or the 7000d because my airflow is not good thanks to the design of the helios strix case I mean my temps are okay but they could be better with a top tier mesh case like this one.
Keep up the good work man 👍🏼
와 7000D 케이스 진짜 잘나왔네.. 메인보드 위아래로 케이블 구멍 뚫어놓은거며.. 등등
전체적으로 올 커세어 시스템 감성 아주 좋습니다. 최고.
감사합니다. 실제보면 겁나크고 무거워서 큰 케이스 좋아하시는분께는 좋을듯 합니다.
Wears an Intel t-shirt to build an AMD system.
Intel: Am I a joke to you?
Thanks very much mate, late comment but I was mainly looking at the case and then you showed the MOBO I’m getting and I was worried it didn’t have a m.2 but after seeing it does I’ll be buying it
It was really joyful to watch u videos .
Okay that's kinda funny... An AMD build and an intel shirt at 2:00 LMFAO. 🤣🤣🤣
Great video. I was looking for someone who has built my same build I'm getting to do or very close to it and this is the closest I've found. I'm using same case (also black) and same CPU cooler. MSI mobo, i9 CPU, also using 4 sticks of RAM (4x32gb for 128 total), and an MSI 4090 RTX. Super excited to build it and this video will go a long way in helping guide me along.
Fascinating. Please show highlighting specs beside each individual parts while individual presentation.
now this is a great casing...very very improved. i like the top radiator holding frame. good, so you no need to flex muscle holding radiator anymore
Beautiful build as always
This looks really nice! Could you possibly do a Rezension APU build with the duzen 7 5700g?
Capellix Leds looks very nice an great build!
Love what you did to hold the gpu up from sagging
5:27 Hello! Please tell me, is it possible to put fans on top, from the outside? Will the lid close?
Underrated
Now that is a bueatiful case. mind you , I already have the 5000D
hey is that a no-thermal-compound-CPU that I'm seeing at 6:24...?
AIO comes with pre-applied thermal paste.
It's just amazing !!! Love it !!
Have the same case and cooler, the h170i is quiet loud but it keeps my 13900k under 70c while gaming 😊
Would love a detailed video of how to connect the argb lighting for a newbie
Cable management for the argb fans was a struggle for me it took almost 2 hours
And all of that was without an aio as I'm using a tower air cooler
wanna build this thing when all the prices total drop down to 3k, nice video
Live your vids man
Just got one, the wiring is a little confusing for me...so trying to find a really good wiring video.. but the case is great so far temps on my CPU dropped by 7-10 degrees.
great video keep it man
Just purchased a new custom build:
Asus GeForce RTX 3090 TUF 24GB
-I9 12900K Intel Processor
-Team T-Force Delta RGB 32GB (2x16) 6400MHz DDR5 Ram
-Team Cardea A440 M.2 PCIe Gen4 NVMe SSD 2TB
-Asus ROG Maximus Z690 Apex D5 Motherboard
-Corsair iCUE H170i Elite 420mm LCD Display liquid CPU cooler
-Asus ROG Thor Platinum Modular 1200W power supply
-Asus XG349C UWQHD 180Hz FreeSync HDR IPS Curved 34in Monitor (G-Sync compatible)
Went with this case for the better airflow.
Asm Build man came out pretty clean
do another no rgb pls
Great Job! 🙌💯
awesome build!
never clicked so fast to watch a pic build before lol
Great tunes man
Beautiful build. Thank you for the great content!
Hi, very clean job first of all, i want to ask something, are you able to use usb hub top of the case cause you connect commander node's usb and rgb hub's usb, as far as i know there is one usb 2.0 connection for the case usb ports but there is only 2 usb 2.0 9pin port on the motherboard, how did you manage this problem? By not to connecting case usb 2.0 or what? I hope i could explain what i mean clearly.
There is only USB 3.0 on top of the case. I'm only using two USB 3.0 out of four on top.
"wears intel shirt and builds amd"
Brand loyalty is a virus that stunts development
Amd is king
@@lucasschroeder3474 😂😂😂
🤣🤣🤣🤣🤣🤣🤣🤣🤣
water-cool is the new standard
Beautiful pc!!
now i thinking how i gonna explain my mom i need this for my microsoft teams calls
Can you actually install 3 more 140mm fans on the side or only max 4 more 120mm fans?
Would also really like to know. Corsair says only 4x more 120mm fans on side but I read someone managed to put 3 more 140mm. Guess maby also depends on radiator size
According to Corsair, you can only put 4 120mm fans. Unfortunately I longer own this PC and haven't tried the 140mm
Beautiful build.
sublime combination
great build :))) good components.
Thought you need only one control... Panel? For corsair fans. Sorry, I'm still new to the pc world. And trying to keep my mind fresh when it comes to building pc.
You need 2 controllers for 7 RGB connections.
@@PCTechnician oooh! I didn't notice the 7th fan. Whoops. If it's just 5 or 6 fans then it's only one?
Yes
5:23 Why is there a dust filter on the top cover? So that the dust doesn't blow out of the case?
Because not everyone is going to put the fans on the top. If you are going to put exhaust fans on the top, you should remove the dust filter
Should've spaced out front fans evenly to cover the whole bracket
If you use a different cable for each 8 pin GPU input, you will not experience drops or stuttering in games.
my future best friend .....
Awesome thank you!
Wow love your video so satisfying
This is hands down the best build I have seen for the 7000D. What are these black polygonal things on the walls and where can I get them?
Art3d Textures 3D Wall Panels White amzn.to/36fhkNh
와.. 이번 빌드 진짜 아름답네요..
오 감사합니다.
Que sonho de computador 👏🏼👌 Parabéns, from Brazil.
Please, more air cooled builds :D
El aparato donde empieza a conectar en el 7:12,¿es el que ya viene en el case cierto?
Pienso escoger el CORSAIR 7000D por un video que vi pero en este tenia los fan de 120mm, 2 kit de 4 de 120mm y 1 de 120 o 140mm en la parte trasera, revisando el precio salia algo mas de lo que pensaba, pero creo que con los 140mm quedaria bien, se ve bien en este video y al verlo me anime a armarla yo mismo.
Volviendolo a ver, estoy confundido en la parte donde conecta las entradas de los FAN, son 7 en total no? En el 1ro conecta 4, en el 2do 4 y en el 3ro 7
Front(3) and rear(1) are connected to the case fan hub and top three(AIO) fans are connected to Corsair RGB hub.
Love this vid, i've brought a similar build to this just the 5000 series version. I can see that you didn't put the top dust filter back on, is that due to the fans being an exhaust or...
Correct
this case llooks amazing to build in
i like this build very much because it is very non-rgb and very coool
Very nice video! To the point and delivers solid info. What was your intake/exhaust fan setup?
Front fans are always intake, top & rear fans are exhaust