Never Buy These Aftermarket Car Parts
ฝัง
- เผยแพร่เมื่อ 30 มิ.ย. 2019
- Car parts. Never Buy These Aftermarket Car Parts, DIY and car repair with Scotty Kilmer. Aftermarket parts vs OEM parts, which is better? Where to buy car parts. Buying car parts online. Buying car parts from ebay. Buying car parts from Amazon. Is it best to buy car parts from a local auto store or online? Auto parts near me. Car parts explained and where to buy them. Car Advice. DIY car repair with Scotty Kilmer, an auto mechanic for the last 51 years.
Thanks for watching!
⬇️ Things used in this video:
1. New Headlight Bulbs: amzn.to/2XR4xHj
2. Common Sense
3. 4k Camera: amzn.to/2HkjavH
4. Camera Microphone: amzn.to/2Evn167
5. Camera Tripod: amzn.to/2Jwog8S
6. My computer for editing / uploading: amzn.to/2uUZ3lo
Mechanic Monday Official Rules:
1. The Mechanic Monday Giveaway will begin July 1st at 7 am CST and run for six days, ending on July 7th at 9 am CST.
2. There will be one winner of a headlight bulb kit valued at $150.
3. To enter, simply leave one non-offensive comment in the video below.
4. Only one comment per entrant is allowed and more than one comment will not increase your odds of winning.
5. Must be 18 years or old at the time of entering this giveaway OR have your parents’ permission.
6. This giveaway is open worldwide.
7. Any offensive, obscene, or lewd comments will be ineligible to win the giveaway.
8. The odds of winning are based on how many people enter the giveaway.
9. The winner will be chosen at random.
10. The winner will receive a reply to their originally posted comment in the video by Scotty around Sunday 9 am CST. The winner will be required to respond to Scotty’s comment within 24 hours or their win will become void and a new winner will be chosen at random.
11. The winner will be required to give Scotty their full name and mailing address to receive the prize.
12. Entrants that use computers, programs, or any other means of cheating by adding additional comments through more than one account, will be ineligible to win the giveaway.
13. Standard mailing time from the win date and the date received, will depend on the winner’s geographic location.
14. This giveaway complies with all applicable federal, state, and local laws, rules, and regulations, including U.S. sanctions.
15. Entrants that do not comply with TH-cam’s Community Guidelines will be disqualified: th-cam.com/users/ytabout/poli...
16. This giveaway is in no way sponsored, administered, or associated with TH-cam. Entrants are required to release TH-cam from any and all liability related to this giveaway.
17. Privacy notice: any and all personal data collected from the entrants and winner will only be used to announce the giveaway winner. The winner’s full name and address will only be used to mail the giveaway prize to the winner and nothing else. If you do not agree to these terms, then do not enter the giveaway.
⬇️Scotty’s Top DIY Tools:
1. Bluetooth Scan Tool: amzn.to/2nfvmaD
2. Cheap Scan Tool: amzn.to/2D8Tvae
3. Basic Mechanic Tool Set: amzn.to/2tEr6Ce
4. Professional Socket Set: amzn.to/2Bzmccg
5. Ratcheting Wrench Set: amzn.to/2BQjj8A
6. No Charging Required Car Jump Starter: amzn.to/2CthnUU
7. Battery Pack Car Jump Starter: amzn.to/2nrc6qR
🛠Check out my Garage to see what I use every day and highly recommend:
www.amazon.com/shop/scottykilmer
► Subscribe and hit the notification bell for all new videos: / scottykilmer
Scotty on Social:
Facebook ► / scottymechanic
Instagram ► / scotty_the_mechanic
Twitter ► Scottymechanic?la...
This is the people's automotive channel! Learn how to fix your car and how it works. Get a chance to show off your own car on Sundays. Or show off your own car mod on Wednesdays. Tool giveaways every Monday to help you with your own car projects. Or enter your own DIY car fix to compete in the best fix of the week contest every Thursday. We have a new video every day! I've been an auto mechanic for the past 50 years and I'm here to share my knowledge with you.
Here's our weekly video schedule:
Monday: Tool giveaway
Tuesday: Auto repair video
Wednesday: Viewers car mod show off
Thursday: The Best Fix of the Week Contest AND Live podcast, car question and answer
Friday: Auto repair video
Saturday: Second Live podcast, car question and answer
Sunday: Viewers car show off
A big thanks to Jimi for making the new intro, check out his TH-cam Channel:
/ @jimimoso
Scotty Kilmer is a participant in the Amazon Influencer Program.
#savagescotty - ยานยนต์และพาหนะ
⬇️ Things used in this video:
1. New Headlight Bulbs: amzn.to/2XR4xHj
2. Common Sense
3. 4k Camera: amzn.to/2HkjavH
4. Camera Microphone: amzn.to/2Evn167
5. Camera Tripod: amzn.to/2Jwog8S
6. My computer for editing / uploading: amzn.to/2uUZ3lo
⬇️Scotty’s Top DIY Tools:
1. Bluetooth Scan Tool: amzn.to/2nfvmaD
2. Cheap Scan Tool: amzn.to/2D8Tvae
3. Basic Mechanic Tool Set: amzn.to/2tEr6Ce
4. Professional Socket Set: amzn.to/2Bzmccg
5. Ratcheting Wrench Set: amzn.to/2BQjj8A
6. No Charging Required Car Jump Starter: amzn.to/2CthnUU
7. Battery Pack Car Jump Starter: amzn.to/2nrc6qR
🛠Check out the tools I use and highly recommend ► goo.gl/rwYt2y
🔥Scotty Shirts and Merch ► goo.gl/pTAeca
Subscribe and hit the notification bell! ► goo.gl/CFismN
Scotty on Social:
Facebook ► facebook.com/scottymechanic/
Instagram ► instagram.com/scotty_the_mechanic/
Twitter ► twitter.com/Scottymechanic?lang=en
Scotty have quick question i have 1988 Monte Carlo SS, cant get my car to go over 60mph and very slow acceleration. engine rpm goes full throttle at times also boggs down but wont speed up sounds like engine isnt breathing at times almost dies in reverse but not drive
Good video on CEM parts!
Totally inspired by this guy, he makes me want to be the best mechanic i can be. Its hard to find honest car guys these days, glad to see he is one of them.
Great video!! Looking for a cooling solution for my 96 cherokee 4.0, aftermarket radiator it is!
Scotty tells like it is!
Scotty, I believe your cat is trying to steal your Toyota. Beware of the crafty felines.
The cat is actually Scotty's unpaid intern. Somebody needs to carry on the Kilmer legacy.
Is that a "cat" burglar?
If that cat trusts Scott so can we .
I can haz Toyota?
LOL! That cat needs to find his couch pillow.
I bought and changed my own side miror for like $40. The dealer ship wanted 300-400. I love youtube DIY car repair videos.
I think you meant Stealership
One professional to another, I just came across one of your videos and loved their content. I'm retired now after 49 years as a technician only doing small light repairs for friends and neighbors. The information you give to the public is priceless in the truth of things. It is very hard to get a truthful answer in any service related repairs.
Ive had over 60 cars of my own and SCOTTY amazes me evertime with his sincerety for his viewers.
Thanks scotty u da man.
What do you steal cars?
Some O.E.M. prices are beyond ridiculous. Having worked as a PM in the Automotive aftermarket, I know firsthand the games each play with pricing.
I just don't understand why their prices are so high.
@@doodletechnologies3189 I think a lot of them don't want to be in the business of supplying parts for vehicles not in production. I've heard people argue about whether or not there really is a law saying they have to supply parts for some length of time, but I can imagine them pricing them really high to discourage people, yet be compliant with the law.
I can't believe the FWD axles Honda sells (600+ dollars each) are 6x better than those I see for around 100.
@@doodletechnologies3189 I'm assuming it's a mixture of people who only will buy oem as well as insurance that has to buy oem. They charge it cause they can and really it's simple price gouging.
my question is how many of those OEM parts made in the same factory as the after market parts. Seems to me there is probably only so many companies actually building alternators for example.
David Kearns Well, they could use different tolerances and specifications to get a cheaper price even if it’s the exact same factory, but with that being said a lot of parts have to pass certain standards and safety minimums, so it’s probably very similar if not the same.
I like how Scotty jumps when he tries to emphasize a point lol 🤣
I like when he laughs he has the pics of the animals laughing
@@davidadams6992 I'm not sure if he's watching the edited and published version of his videos lol. Maybe he just gives the tapes to neighbors 15 years old kid to edit
Scotty, I absolutely love your videos and can’t wait until the next one comes out. They are so informative and helpful. Keep up the good work my friend.
Love your channel, Scotty! I've got a 2005 Civic EX, and have been doing all of the work on it myself without a whole lot of prior knowledge. I'm about to replace the much of the front and rear suspension with new parts (coilovers, bushings, ball joints, end links, rack ends, etc). Took the last 6 months or so buying the needed tools and parts so I can do this kind of work myself, and it really feels good to have the tools I need for the job and be able to get the work done for a fraction of the price that I'd pay someone else to do it.
Oh wow. Look at that, a BMW needed a radiator replacement. BMWs need radiator replacements almost as often as they need oil changes.
My '03 X5 still has it's original radiator.
My 06 3 Series has 290,000 miles. Reliability is excellent. My BMW is Made in Germany.
Avoid BMW's built in South Carolina.
LOL
did you know you should put a racing safty locking wire nut on a bmw or any car so the oil pump nut does,nt come off while your driving
Behr brand is the best aftermarket radiator for bmws
Your images on the background make me laugh everytime, I appreciate your sense of humour with your informative videos. Keep it up Scotty!
Yeah when he says something "thick" like heavy oil..his pic of a THICK BLACK WOMAN IS PERFECT!!💙
That's gotta be somebody else doing that - maybe a son or his wife or somethin... lol
He outdid himself on this one! 👌
And he does in fact do it himself, apparently. 👏
That pic of the "Local Supplier" @ 6:55, had me rollin' 🤣
As usual, you are right on target Scotty. But here is what you missed.... When you go to the dealer for a repair, they don't always use the OEM part you expect them to use. Most of the time they order the part from the local Auto Parts store as you would, but they charge you the OEM list price for that part. I have seen this happen a lot of times when the local parts delivery truck comes into their lot. You don't get what you pay for, there is no way you can be assured you are getting OEM parts unless you are standing right there with the mechanic when he opens the OEM box and displays the part for you. Been there and have seen it happen!
True
Part of their business scam
Yeah I deliver parts to Lexus for NAPA and I own a 2013 RX Lexus that needs new cv axles fwd and they said 3000 just for the axles not labor . I said shame. And hung up
Who goes to the dealership for repairs?
What aftermarket company do u use
WOW man, you make some really really good logical points about part manufacturing that is probably going to save me thousands over my lifetime. Thank you so very much Scotty! I just watched another one of yours about the quality of different fluids and how you can check the label for the rating it is tested to and not think about the price as what determines its quality. actually I've been watching your videos for more than a year and they are always informative and I can't thank you enough.
I can’t keep up with Scotty’s videos 😩 how he does it it’s beyond me, u have crazy energy Scotty 😀
David Findle 🤣🤣🤣
There are two Scotty s, ONE that you can see AND the 4in the morning vidio recording Scotty? :-)
Admire the man is a dooer!!
I tried mimicking Scotty's hand gestures while watching, my arms got tired after a couple minutes. I don't know how he does it. Love ya Scotty! # Oldmanstrength. 😂😂
😂😂😂😂😂
Watch at 2 times speed, he looks like a conductor
A ton of different takes. That's the only humanly possible way.😅
It's a bad sign. Old communication technique used mostly by politicians and those who rule the world. It's a brainwashing method. One particular tribe of people always use the hand gestures when they talk, those people have put themselves in charge of everything. I don't trust this bastard.
Excellent videos!! I can't stop watching... Your experience is a great asset... Thanks for posting these and can't wait to watch more..
Thanks for the tip Scotty !! Cheers from Bolton Ontario Canada !!
The more technology advances... The more I want to refurbish a 1970s vw beetle for my daily driver!
Good news....you won’t need an aftermarket radiator.
There is a huge aftermarket for old VW's. They are relatively inexpensive to build. Join a club and ask about the best and worst aftermarket parts.
I miss my '67 beetle. :( it was an awesome car!! I changed the intake manifold and installed a dual port carb. The thing worked great and had Great pickup! Loved that pinging sound of the exhaust!
I drive a 74 MGB for 6-8 months out to the year. There is nothing I wouldn't tackle for repairs. And parts are cheap. Just have to plan for purchase on the internet.
karl28560 100%!!!!! Restore !!!
Just replaced my dead fuel pump with aftermarket on my Lincoln Towncar 2 weeks ago.
First thing Scotty mentions : Fuel pump
I’m screwed 😂
Keep your fingers crossed
My dad replaced the fuel pump in his 2004 Ram 1500 Hemi 5.7 with a aftermarket one and it died in like 3 years :/
GM wanted $842 (Plus taxes) For my van fuel pump. I put in an aftermarket one, which was still working when I sold the van 5 yrs later.
@@drewthompson7457 Not saying all of them are bad. I'm sure their not but alot tend to be hit or miss.
I've seen pumps for the GMC truck I owned selling from 39$ to 300$ ...I did find a company that had one for $139 plus shipping. Do your research...
Your Town Car pump might be ok. Depending on year and manufacturer. If you just went with the cheapest, least expensive ....well.
Thanks Scotty, you're passed along knowledge has saved me hundreds of dollars over the years. You are great
As always, Thanks a lot, Scotty!
P.S.: You're insert photos are brilliant!
In addition to your humorous videos, I love the “Live Free or Die” plaque and that scene stealing cat! Lol.
Cat is gone. He made it vanish.
Late 90s Corolla door handles, inside and outside, always broke for me. Even the aftermarkets broke but they were cheaper to replace. LOL
little tiny $2 vice grips work good - seen a few folks use these and just leave 'em on there.
I go to u pull our parts
probably the same company that makes the camry door handles, every outside one on my car is broken. I can still open them but its a PITA. Decent theft deterrent but the fact that its a 98 Camry should be enough of a deterrent anyway.
I had '98 fixed permanently when a Grand Prix cut in front of me. LOL I have a 2005 now, a better built car I think. My girlfriends '99 got fixed by trading it in.
Scotty I love your videos they're incredibly helpful and increase the chances of me successfully fixing my car or not getting scammed by certain big chain mechanics. Keep up the great work.
Thank you for reassuring my replacement car part choices. Keep up the awesome work Scotty! You are the best!
Bmw wanted 800+ for a cooling fan for a 1999 E46 i thought they were joking but no. So i went to the junkyard and bought one for 50.
Junkyard says it all for a BMW.
No better way to start the day than watching a new vid from Scotty!
End of the day for my country 😂
Looks like Scotty starts his day with scotch!
I REALLY LOVE YOUR TH-cam SERIES. LOTS OF GOOD INFORMATION. THANK YOU
Thanks for the tips and common sense Scotty. Your videos have helped me fix problems or avoid costly mistakes on my car repairs. I’m now a subscriber and look forward to more of your knowledge and off beat humor...
I normally use after market parts but i read reviews and compare 5 or 6 different ones before making a choice
I agree the radiator aftermarket are great and I have had zero issues! Same with the headlights. Great video
I think you’re on of the best mechanics I’ve watched! Cheers, Ralph.
Nothing like a rainy sunday gives me time to watch scotty vid's keep um coming Scotty
I can remmeber when my brother was rebuilding his old civic engine, the OEM rings where $600 where the aftermarket ones where $150. They where the same rings, made in the same place. Just one had Honda stamped on the cardboard packaging!
Never buy OEM cabin filters, total ripoffs.
Or wiper blades!
My Peugeot OEM wiper blades are actually cheaper than aftermarket ones, and they show. They're the worst, last at most 6 months
Parts like filters, wiper blades, and sometimes even suspension components are rarely made in house and are usually outsourced to aftermarket manufacturers.
I got mine off eBay for 5 bucks and change. 2 minute fix!
I went to the Toyota dealership in my country and asked for a cabin filter. They said it'd cost 100 USD for a replacement cabin filter then I went outside to a shop just opposite of the dealership and they wanted 10 bucks for the same quality one.
Thank you Scotty!!! Always love your videos
Thank you scotty I learn alot from your videos and you definitely are exciting to watch love when you come out with new ones keep up good work !!!!!
I love this channel, learned so much about fixing cars and the industry. Thank you!
Exactly. The same with me. After watching for six month I've decided to open my on Repair Shop. Only problem I must fill my garage with all that junk Scotty have, and this is no easy.
Sometimes I have to rewind and listen again because the pics you put in the corner of the screen having me laughing and I miss what you said.
Me too ✌️
@Sandy Lee 🤣🤣🤣
Love the info. I’ll keep this in mind when looking for parts.
Just replaced a/c evaporator for just 10 percent of cost from stealership. Lifetime warranty too.
Some people are good with junk quality. Over time you spend more when you dont buy quality. Its the same mindset as those who are rent-a-center or money tree payday loan regulars. In a pinch, you gota do what you gota do. But living life with the aspect of driving on the spare vs using the spare as a very temporary emergency ALWAYS costs far more down the road.
My neighbor buys used tires. He has to, because he takes corners on 2 wheels all the time. He’s lucky if he gets 2 months out of a tire. Sometimes you have to buy cheap or used...
Not true car breaks. fix it . sell it . buy another you will always win
Erin James Well said! Totally correct!
Great insight Scotty. I try to use the same logic. And see the pros and cons of any oem or aftermarket part I need. Unfortunately, where I live I don't always have the possibility of buying parts locally.
You always have good info and great insight. Thanks for sharing your experiences and knowledge of 50plus years. Been a fan of your page for couple years now.
Great video Scotty as always, love to have those headlight bulbs..
Monday mornings are better with a cup of coffee and Scotty!
flyphotoguy 100%!!! 😆👍😉
I enjoy learning new stuff from you Scotty.
with the cup saying ..."live free or die"
I'm glad I discovered your channel. You're always interesting and informative. Keep up the excellent job Scotty.
Who would've thought that someone could be successful delivering a good product line?
Great info Scotty God bless and keep up the great videos
Hi Scotty. I came across your channel several months ago and just LOVE it!! Being an old shade tree mechanic myself I thought I knew pretty much all about the basics of car maintenance. Wow was I wrong. You have given me even more knowledge than I could dream of getting on my own! I also love the way you tell it like it is. I would like more information about the variable output head lamps you spoke of. What make and where I can get them. Thanks again and keep up the good work!!
Found the information on the lights in your description! Probably should have looked there first...Duh. Thanks again!!
Love how you modernized your older cars to have some of the features in cars today!
Brent Isidro I changed my points to electric and it took me about 5 minutes... I’m not a mechanic and know very little about cars
Great video again Scotty! Some OEM and after market parts are sometimes priced similar, like air filters. I always find going with a good brand backed by customer reviews are always the way to go. Not the price tag!
That's True Scotty... My cousin is a licensed mechanic... Back in 2013 I had a job riding on me getting transportation... I knew to get a 3800 engine because I was low on cash & I know those engines run forever as long as you take pretty good care of them. By the Grace of God, one of my old student's dad knew someone who was selling an '03 Impala for $2500... The only. It was a private seller. He was driving an Impala & had a 3rd on sitting in his yard. The only thing wrong was the tie rod & struts because he said he hit a guard rail from almost falling asleep at the wheel. My cousin test drove it & said, "If you don't get this car, you're crazy!" He said that because he knows how OCD I am. He was focused on how it ran. I got the car. The first thing we did was go to the salvage yard. He found two practically brand new struts with the original tags still on there... I only paid $50. It's also true about OEM vs aftermarket... Back home I would always go to this one parts place because they would always price point & tell me the risk of the OEM vs. the aftermarket. I needed a fuel pump for my '03 Impala & they told me to buy the OEM. They close at 5:30 pm on weekdays, 2 pm on Saturday, & closed on Sunday... But I loved how knowledgeable they are. They are always cheaper than Auto Zone & these other places. If they don't have it, they will order it for me! 😊
Great information Scotty thanks for all the help
Love the Scotty approach to mods: purposeful, tasteful, and don't destroy what's already good about the car.
I've been watching your videos daily trying to keep up! I'm always learning something new, Probably the best repair channel we've got.
What repairs
Thanks for the info. Moog is another good aftermarket manufacturer that has not let me down in the last 20 years of working on my own vehicles.
This is why I browse the comments. I was looking into Moog for a wheel hub assembly. Thanks for the info!
Thanks for all the good info Scotty, I love your channel
Hey scotty, everytime I watch your videos I learn a lot. Thanks for being honest and truthful to all your videos. God bless :)
Always enjoy the pictures that come up, specially the horse when he laughs 😂😂
Always great info.
And thanks for your sacrifice!
Great video thanks for all the wonderfully useful info
The laughing horse meme is funny everytime
Indeed it is
Sometimes the OEM brand is a 3rd party part in an different box.
I saved money working on my '92 Astro by buying a Delphi fuel pump and NGK platinum plugs. Delphi makes the AC Delco pump and NGK makes the AC Delco plugs.
kloroformd AC Delco is s rebrander. Like you said, NGK makes the spark plugs, and AC Delco slaps their name on it.
3:24 Talking about fuel pumps and shows a breast pump. LOL
Michael Cowan trump 2020
breast pump lolololol
🤣
titty fuel for the soul
I was just gonna say this. LOL
Thanks Scotty for so many great videos. You've saved me lots of time and money. Much appreciated
I swear Scotty you kill it with the picture references on all your videos 😂😂😂
LoL 🤣 🤣
I like them too. When horse or hyena is laughing
The Breast Pump today was a riot!
Hi Scotty it's good the see your still doing well. Like the new intro but i do miss rev up your engines
Thanks for the info. Your comments on stuff has been insightful.
Thank you for another great video. It was very helpful.
specialheavy hey Scotty, I need new speakers. How about it.
Gene Mateja
7917 W Courtland AV.
Norridge Il 60706
I am glad you said that about air cond compressors as I just bought one a UAC for my 02 Elantra and a guy at work kept saying you should have got OEM
Yes, Also check and make sure the ohms on the new fuel sending unit are the same as the old one ..... if not the same your fuel level gauge will be off ...
"Comes and works" tinder pops up LMAO
Scotty, I greatly appreciate your common sense and humor! Thank you for the videos!
Scotty is really pimping out that 94 Celica! Stay away from spinners, Scotty! 🤣🤣🤣🤣🤣
That’s not offensive is it?
Nope
someone will be offended somewhere, dont worry they will be happy to reeeeee at ya for it haha
Scotty you're the best. Digging the truck pic with the plywood and 2×4 front end. Spatula rearview mirror. LMAO 😂🤣 Hulk, door knob for a house, and a window unit AC.😂😆
Hey Scott. I followed your advice and bought some Akebono pads for my 2016 Tacoma. They work awesome. Thanks a bunch!
Thanks Scotty for all your very helpful tips and advise, I am always watching your videos...
Put a dollar /pound/shekel in a jar when Scotty mentions “my Celica”. Then retire 10 years early.
Now there’s a savings plan💰😁
Or anytime he mentions cheap parts, Chinese parts, or poor quality. :P
I have a 2006 Honda accord 6-speed manual. The clutch went out at 180k. A mechanic put a new clutch in it. It started slipping at 11,000 miles. The mechaninc said "it's just an OEM clutch" as if I shouldn't expect it to last. If the first clutch lastes 180k anything labeled "OEM" should last just as long. OEM should mean as good as the original equipment, but it dosen't and I think it should be law.
Did you resurface the flywheel? Because i think even if it's non OEM clutch, 11k is too fast to slip.
Whenever I replace a clutch in anything always put a high performance clutch in and resurface the flywheel it became a habit after messing with AutoZone's parts
Great stuff. Really enjoy your videos
Nice video Scotty! I look forward to watching your entertaining and informative videos. Thanks for the information :)
Yes OEM all the way that's what I use on my 09 Corolla. Thanks Scotty
+1 for OEM. The scrapyard is my friend! The only time I deviate is when I'm very confident that a newer aftermarket part exceeds the original quality.
The key to buying OEM is understand that your dealership can still mark it up 200%. (Not everything, but some things.) If you can find the actual Nippon Denso or NGK or whatever part number, sometimes you can buy it locally or online MUCH cheaper.
@@BikeHelmetMk2 hey if that's what you like go for it not me I can get OEM parts very reasonable online
Always love mechanic Monday!! Led light bulbs get in my mailbox 😉👍
Always such great advice, thank you!
Just found your channel yesterday! Great advice every time I watch your video's Thanks.
I agree, just don't cheap out on stuff like brake pads, rotors, or any front end work. Use quality aftermarket and you should be fine
I hear this all the time, but seriously, how do you know? Saved thousands replacing brakes and rotors and can't tell the difference by price. If they fit, work, stop when you want them to and don't wear out too fast, are you just paying extra for peace of mind or out of fear. I Do a lot of research buying tires and it pays off (really notice differences) Brakes and rotors? not so sure.
@@mikepantaleo2360 Agree. I am constantly astounded by the low price of brake pads. I usually try to find reasonably 'expensive' ones - like $60 instead of $25, but for my '88 F150 I really only find $25-30 ones (rear set of 4 $28 - I don't even know how they ship them for that) and they always work just fine, no squeaking, seem to last (10 years on my front ones, don't drive it much). Rotors, meh, after having an Audi that when through rotors dater than pads, I just get the cheapest ones. I can't tell the difference.
My MOOG greased end links made of Steel are better than Ford part. Zerk fittings.
$16 each from RockAuto 😄
Buff Barnaby - for gm trucks/suv's these moog joints are the best for steering and suspension. These are light years better quality than OEM. I won't even change them unless I use these!
My friend bought some "aftermarket" control arms for his Ford. (I can't remember the brand) You could see where someone half-assed ground off the Ford logo. They were really OEM parts.
I’m a big TRW fan. I think they are Taiwan now. Long gone are the days of USA parts. Even most factory parts are sourced overseas.
OEM ball joints will last much longer than your moogs. Guranteed
Thanks for the tips, it's been very useful 👍
Scotty's videos are great! Not only entertaining, but full of knowledge!
1994 Toyota Celica seems too good to be true! Yup indeed.
XD
Huh, didn't know they made LED headlight bulbs that can change brightness like that... Thanks for enLIGHTening me, Scotty!
As always, excellent notes and enjoyable video, thanks, Scotty.
One of the finest videos you've made in recent months. Thank you, thank you.
Great stuff, OEM fuel pump for sure, hate to drop a tank twice.
Cut the floor
Take out the back seat and open the access cover lol
Daniel S. no access hole in a chevy avalanche or my f150. Its drop the tank or move the bed or cut a hole
Luis Gonzalez not cutting the floor
I agree with you about OEM products some of them can be good some of them can be bad in neighborhoods to shop around thanks for the info buddy
Great channel, with straight-talking advice.Thank you, Scotty.
Thanks for the great video, Mr. Kilmer! I second your enthusiasm for certain aftermarket and second-hand parts. There is something comforting about buying OEM parts though. When the originals last a long time before needing to be replaced, I’m compelled to buy the same exact part again.
OEM or equal fuel pumps for sure! I've had two aftermarket pumps fail in the past, brand new! No more of that.
I had a mechanic that had gotten burned so many times he no longer used the aftermarket fuel pumps, said when one failed before the customer got out of the parking lot that was the last straw.
@@Adiscretefirm yeah man they are reaallly sketch. I have one in my Jimmy right now, but I also added some solder and a different sock when I put it in. It has lasted for a few years, but you shouldnt have to be a self taught electrician for a product to last.
@@elidames6889 I bought an old Chevy one time with the original pump in it that sent fuel but didn't register fuel level, lived with it for a while and made the mistake of replacing it with aftermarket for $300 instead of the $700 OEM. Lasted 13 months (just out of warranty) replaced it with OEM (would have been cheaper to do it once with labor added in) that one was still going strong 5 years later when I sold the truck.
@@Adiscretefirm i hear that. The ONLY reason why I still have this Jimmy is because I rebuilt the 4.3 myself. It was my "if I learn, it runs. If I dont, thats not a choice" vehicle. Glad I did because the experience was invaluable. My pride wont let it go. Who needs a fuel meter when we have odometers, ami"right? Lol
@@elidames6889 luckily I was keeping a fuel log with gps based mileage to see just how bad the mpg was going to be with that 350 ci under the hood (around 12, lol) so I never ran out, but it was too stress inducing for the trips way back in the woods I wanted a truck for.
Thanks for the information, really helps alot especially when we buy parts for our vehicles.
God Bless, Florida Usa
do you have in Florida high tech jobs?
Thank you Scotty for helping me keep my older cars running great !