I have never pressed restore myself as it should reboot with the new settings once you have switched it off and back on again. I have never had a problem. What problems did you have?
@@mfloutdoors Prior to hitting the restore button the mag range was not showing the new range of gradations, it was going 3.5, 7.5, 8,5 etc . What fooled me was the green and yellow screens were available.
Looks like a good ballistics calculator within the HIK scope. A couple of questions - where do you get the BC for the ammo you use ? And does that BC value need to be very accurate - or is a ball-park value usually good enough ?
The ballistic coefficient for the ammo I get from the ammo manufacturers. Things like the muzzle velocity I chronograph myself. All data needs to be as accurate as possible when putting the figures into the ballistics calculator for it to work correctly. You may have to tweak some settings just to bring it spot on. Hope that helps.
@@mfloutdoors Cheers Karl - I keep finding I'm often high or low unless I input BC values that are wildly different from published values. And then the calculator is often only accurate over limited ranges... 😕
Try doing a test profile if you don't want to alter the one you have set up, instead put in all the figures as they should be into the BC and then try altering the scope hight value up or down slightly. I have done this before to bring the POI into line at different distance. It may work for you.
I have the 4K LRF too Karl and not done any updates, as I'm an " If it ain't broke, don't fix it" kinda guy. Liking the green filter though, so my give it a go when I switch it to the rimfire ?.
I'm an update freak 😂 It's easy to do and I have had no problems with any of the updates to be honest, I think it went well over the top last time, really all people didn't like was the change in the way it zoomed. I had no problem with poi or BC at all. 👍🏻
Evening Karl. I’m not touching mine😂. It works well enough for me the way it is,but it is only months old. Just actually came home after looking for a buck and I’m still amazed at the clarity in near pitch darkness without any ir source…. But I’m not a tech wizard so I don’t even know how to fully use the menu as it is now.
@@mfloutdoors to scared Karl 😂.. I haven’t got time to get out for deer at the moment but I had a meeting with Forestry and they’ve waved their finger at me to get my cull numbers up… It ain’t going to happen 😂
Yes I fully understand Steve its really hard juggling time coming up to and during the season, hope its all going well for you mate, good luck with the rest of the season.
I haven’t updated at all since the scope was purchased. Watching your video the poa seems quite sensitive to angle. Can the adjustment with angle be turned off? The image looks much improved in night mode from what I can see from your video, not as pixelated at high mag. Is that your impression looking through the scope compared to earlier firmware?
Hi Paul, no you cannot turn off the BC from calculating angle. Yes the picture is improved from what I can remember from the original firmware. The picture is also helped by a good quality IR. Hope that helps. Thanks for commenting and hope you enjoyed the video.
Done all the updates, never had an issue. I think most are user error.... 😅 Same with any product, there is literally 10s of thousands of these units in circulation. It's inevitable that a few will go wrong. That's just life. But Hik has been quick to "rectify" the issues sometimes users where having.
Someone sent a message to be published on this video and for some reason when I passed it for publishing it disappeared, if your message has not shown up on here please send it again so I can publish it, apologies to whoever it was, not sure what happened.
Good shooting Karl look forward to next video.
Cheers Keith, pleased you enjoyed it !
Well done again Karl mate.
Great footage and good shooting.
Look forward to the next vid already.
Keep em coming Karl-love em mate
Mark 🏴🤙
Glad you enjoyed it Mark, hopefully next week's will be a longer one, weather permitting. Thanks for the support mate.
Well done Karl a good mixed content.
Cheers Stephen, hopefully have a longer video next week, all going well Ill be back out dancing around the fell with my foxy friend 😂
Well done
Cheers Steve 👍
Thanks for the video, I would say just remember to press restore after the update, speaking from experience lol.
I have never pressed restore myself as it should reboot with the new settings once you have switched it off and back on again. I have never had a problem. What problems did you have?
@@mfloutdoors Prior to hitting the restore button the mag range was not showing the new range of gradations, it was going 3.5, 7.5, 8,5 etc . What fooled me was the green and yellow screens were available.
Strange wonder why it did that, mine was fine, but as long as yours is working correctly after a restore that's all that matters.
Looks like a good ballistics calculator within the HIK scope.
A couple of questions - where do you get the BC for the ammo you use ?
And does that BC value need to be very accurate - or is a ball-park value usually good enough ?
The ballistic coefficient for the ammo I get from the ammo manufacturers. Things like the muzzle velocity I chronograph myself. All data needs to be as accurate as possible when putting the figures into the ballistics calculator for it to work correctly. You may have to tweak some settings just to bring it spot on. Hope that helps.
@@mfloutdoors Cheers Karl - I keep finding I'm often high or low unless I input BC values that are wildly different from published values. And then the calculator is often only accurate over limited ranges... 😕
Try doing a test profile if you don't want to alter the one you have set up, instead put in all the figures as they should be into the BC and then try altering the scope hight value up or down slightly. I have done this before to bring the POI into line at different distance. It may work for you.
I have the 4K LRF too Karl and not done any updates, as I'm an " If it ain't broke, don't fix it" kinda guy. Liking the green filter though, so my give it a go when I switch it to the rimfire ?.
I'm an update freak 😂 It's easy to do and I have had no problems with any of the updates to be honest, I think it went well over the top last time, really all people didn't like was the change in the way it zoomed. I had no problem with poi or BC at all. 👍🏻
Evening Karl. I’m not touching mine😂. It works well enough for me the way it is,but it is only months old. Just actually came home after looking for a buck and I’m still amazed at the clarity in near pitch darkness without any ir source…. But I’m not a tech wizard so I don’t even know how to fully use the menu as it is now.
Go on Steve you know you want too 😂Yes they capture any small amount of light really well, hope you got that buck you were looking for 👍
@@mfloutdoors to scared Karl 😂.. I haven’t got time to get out for deer at the moment but I had a meeting with Forestry and they’ve waved their finger at me to get my cull numbers up… It ain’t going to happen 😂
Yes I fully understand Steve its really hard juggling time coming up to and during the season, hope its all going well for you mate, good luck with the rest of the season.
I haven’t updated at all since the scope was purchased. Watching your video the poa seems quite sensitive to angle. Can the adjustment with angle be turned off?
The image looks much improved in night mode from what I can see from your video, not as pixelated at high mag. Is that your impression looking through the scope compared to earlier firmware?
Hi Paul, no you cannot turn off the BC from calculating angle. Yes the picture is improved from what I can remember from the original firmware. The picture is also helped by a good quality IR. Hope that helps. Thanks for commenting and hope you enjoyed the video.
Done all the updates, never had an issue. I think most are user error.... 😅 Same with any product, there is literally 10s of thousands of these units in circulation. It's inevitable that a few will go wrong. That's just life. But Hik has been quick to "rectify" the issues sometimes users where having.
I totally agree with you. It's exactly what I thought. Hope you enjoyed the video 👍🏻
99% is user error lol
Someone sent a message to be published on this video and for some reason when I passed it for publishing it disappeared, if your message has not shown up on here please send it again so I can publish it, apologies to whoever it was, not sure what happened.