Please navigate through video using the time stamps. Time stamps ------------------------------------------------------------------------------------------------------- 00:00 - Intro 01:08 - Step 1: Creation of the Virtual Domain of Syntactic Foam 04:48 - Step 2: Apply Boundary Conditions, Loads and Kinematic Constraints in ABAQUS 10:12 - Creating Kinematic constraints and ABAQUS *EQUATIONs 14:37 - Review of ABAQUS Simulation Results 15:31 - Step 3: How to generate stress-strain plots from ABAQUS simulation 21:25 - Outro
Dear professor Could you please also show how an initial crack grows in a porous media under uniaxial compression, especially in 3D models Thanks in advance
@@MichaelOkereke Crack growth in porous media under uniaxial compression is not limited to a specific field. Many engineering sciences need to know about it. For example in Petroleum Engineering, it is the main component in the hydraulic fracture modeling. In Mining Engineering its usage is in the blasting processes. In Mechanical Engineering, scientists use it to discover how crack grows in the human bone and how they can control this phenomenon and this goes on in other fields like Civil Engineering . Therefore, crack growth by uniaxial compression is needed for a wide range of science and your effort by answering this question will be hailed by many scientists and students. For further verification my name is "Mohammed Rezanezhad" (you can find me in the Google scholar) and recently I have been admitted to CWRU - USA. Best regards
You are making good contents. Just my two cents: 1. slow down your pace 2. give a nice transitional words while you are explaining. The inclusion of these two things will make your video content more attractive. Thank you again for your nice creation.
Please navigate through video using the time stamps.
Time stamps
-------------------------------------------------------------------------------------------------------
00:00 - Intro
01:08 - Step 1: Creation of the Virtual Domain of Syntactic Foam
04:48 - Step 2: Apply Boundary Conditions, Loads and Kinematic Constraints in ABAQUS
10:12 - Creating Kinematic constraints and ABAQUS *EQUATIONs
14:37 - Review of ABAQUS Simulation Results
15:31 - Step 3: How to generate stress-strain plots from ABAQUS simulation
21:25 - Outro
Could you please make a video for predicting thermal properties like thermal conductivity using Abaqus RVE?
Sir could you please upload video on randomly distributed fibers in cylinder
Good suggestion. I will bear this in mind but not what I am working on right now. Good luck with the research.
Dear professor
Could you please also show how an initial crack grows in a porous media under uniaxial compression, especially in 3D models
Thanks in advance
Hello, thanks for this comment. I have not done this sort of study before so unsure how to help you immediately. Good luck with the work.
@@MichaelOkereke Crack growth in porous media under uniaxial compression is not limited to a specific field. Many engineering sciences need to know about it. For example in Petroleum Engineering, it is the main component in the hydraulic fracture modeling. In Mining Engineering its usage is in the blasting processes. In Mechanical Engineering, scientists use it to discover how crack grows in the human bone and how they can control this phenomenon and this goes on in other fields like Civil Engineering . Therefore, crack growth by uniaxial compression is needed for a wide range of science and your effort by answering this question will be hailed by many scientists and students.
For further verification my name is "Mohammed Rezanezhad" (you can find me in the Google scholar) and recently I have been admitted to CWRU - USA.
Best regards
You are making good contents. Just my two cents: 1. slow down your pace 2. give a nice transitional words while you are explaining. The inclusion of these two things will make your video content more attractive. Thank you again for your nice creation.
Thanks for the feedback!