Just noticed I'm subscribed to 158 channels on TH-cam. I don't skip on maybe 5 of them. RPM is one of them cause of the interactions. Corvettes have always been my favorite cars and seeing these builds are the best. Thanks guys.
Steve, explain the trans tuning...or get Captain Sarcasm to do it. He took the ZL1 slowly through the gears to 4th then mashed it. He lifted as soon as it shifted into 7th. I'm curious about the process.
That's exactly what I'm planning on doing when I find me a c6 ls3. I'm not familiar with running anything other then pump gas lol. How much more do you think it could make on a fuel system
Those A&A blowers are pretty impressive I must say with the little 6 rib belt setup. I tuned one on 10psi and super low timing and it made damn near identical power think it made 680whp with the restricter plate installed still. Took the plate/ring out and picked up 4 psi and made damn near 800whp lol Customer said 680whp was enough and reinstalled the plate after
I run that same setup on my Supercgarged S550 305/19 square Nitto NT01.... great content!!!. Im debating on a ZL1 1LE, or a GT350 with a gen 5 whipple..if I went Chevy it would be to Fran for tuning for sure!!! Keep it up great stuff hopefully Cecil opens soon..
Fram let you know a you're a good tuner bro I need a best out there I appreciate what you do is a businessman in a tuner I watch a lot of other tuners on TH-cam they're not as good as you are bro and you have some good mechanics and how many puts out the videos for you I appreciate what you guys do look up the good work are you guys there even your brother it works in the front office stay safe and keep working hard see you guys on the next video
I absolutely love a 6 gen Camaro ZL1 1LE. It looks so menacing. I am interested in what the black SS puts down with that F1-A. Did the grey C6 Z06 break numbers. I can't remember what's the highest one. Since ya'll are always breaking the internet.
I need cammed LS3 for my 73 TA 💪🏼Won’t happen though so my mild 455 goes high 12 low 13 and will do for now. Ran even with LS2 vette 60-110 Edit: I would love to see the ZL1 and blown LS3 vette in this video race. Would be a great one. From a dig and then from 60 or so. 👌🤘 I saw a procharged LS3 on north Texas street racing I think it’s called that walked from many fast cars. I bet this one runs like that.
Wonder how much harder you could squeeze the ls3 if you threw a meth kit on it. My ls3 vette is getting her Novi kit and meth put on very soon i'm hoping to be in the 730-750whp range.
The kit comes with a Kenne Bell Boost-A-Pump and Larger Fuel Injectors. Great Question. Its a great kit. A&A as well as ECS do a great job and both worked with Vortec/Paxtib engineering to get it right. Intercoolers are both different however.
@@plexidust5101 yeah I have the same kit I know what it comes with. I wouldn’t consider 60 lb injectors and a boost a pump a fuel system. I was referring too if they add a dual or Triple pump fuel system.
Another great question from me as usual lol. Are the valve covers just for looks or do they serve in some form of performance i.e cooling effects, more clearance or more fittings? I know the inserts are for looks but I don't know about the covers themselves. Thanks again and as you'll know y'all fuccin Rocc 💯💪🏾🦍
Just noticed I'm subscribed to 158 channels on TH-cam. I don't skip on maybe 5 of them. RPM is one of them cause of the interactions. Corvettes have always been my favorite cars and seeing these builds are the best. Thanks guys.
I’m just here for the Trans Tuning. Thanks for the video!
GM engines put out a lot of torque! Stock or modded. Nice numbers on the ZL-1 new cam install and the idle lope sounds great!
Matt knows his stuff for sure. He is right, the JSB Z06 has had a motor swap already 😉
What does JSB mean?
Thanks
@@frankdatank7751 Jetstream Blue - one of the color options on the C6.
The big lebowski john goodman " am i wrong, " killed me 💀💀💀
"cam bearings are fine as long as you dont look at them" -Sloppy Mechanics
I wouldn’t trust no mechanic anywhere to work on my cars
I thought the same thing. How do they know that the cam bearings in the block are ok before throwing in a new one?
I love this channel! Keep it up guys, you guys are badass!
13:30🇺🇸American power always i loved that Corvette pretty loudly V8 sounding as so addictive,lovely and amaizing
I got my rear fenders, side skirts, spoiler, painted from RPI designs. And shipped to Hawaii in a crate
Steve, explain the trans tuning...or get Captain Sarcasm to do it. He took the ZL1 slowly through the gears to 4th then mashed it. He lifted as soon as it shifted into 7th. I'm curious about the process.
The lower gears are real short then 7th if I am correct is the 1:1 ratio, above that is like ODs
Is there a certain mileage camshaft bearings or bottom end components should be considered when just doing only a top end build🤔
They are smart , my g8 got cammed at around 135k miles and ended up blowing up at 160k 😂
Awesome builds and awesome content ! Keep it up guys
That's exactly what I'm planning on doing when I find me a c6 ls3. I'm not familiar with running anything other then pump gas lol. How much more do you think it could make on a fuel system
Those A&A blowers are pretty impressive I must say with the little 6 rib belt setup. I tuned one on 10psi and super low timing and it made damn near identical power think it made 680whp with the restricter plate installed still. Took the plate/ring out and picked up 4 psi and made damn near 800whp lol Customer said 680whp was enough and reinstalled the plate after
Was that on pump gas only?
Thanks
@@frankdatank7751 pump 93/meth
Great video guys. Hope you have another Sunday video.
Nice chop on the silver C-6!!
I run that same setup on my Supercgarged S550 305/19 square Nitto NT01.... great content!!!. Im debating on a ZL1 1LE, or a GT350 with a gen 5 whipple..if I went Chevy it would be to Fran for tuning for sure!!! Keep it up great stuff hopefully Cecil opens soon..
Gt350 all the way
I`ve been digging on Fran`s watch lately....what brand/model is that, Sir ?
Finally ! 🤘
Seems like Matt lubes the most shafts
Yo what kind of camera are you running, shit is beautiful
I love watching this channel you guys are doing a great job
Did that C6 with the A&A make all that power with a 6 rib belt?
Yes. They will do that pretty easily on a 6 rib
@@RaceProvenMotorsports truely impressive
@@RaceProvenMotorsports what 60-130 time do you think that setup should run? For the a&a ls3 vette.
Ah another great episode from rpm
Fram let you know a you're a good tuner bro I need a best out there I appreciate what you do is a businessman in a tuner I watch a lot of other tuners on TH-cam they're not as good as you are bro and you have some good mechanics and how many puts out the videos for you I appreciate what you guys do look up the good work are you guys there even your brother it works in the front office stay safe and keep working hard see you guys on the next video
What's a safe power limit for boosting these ls3's and using as a daily
10 lbs
I was just on the bring a trailer site and Paul’ Teutul seniors car is for sale . They say that he wasn’t happy with the 701 HP
Well we did nothing performance wise to it, we fixed the issues on it and that’s all we were told to do.
Where are guys finding the rear fenders for these 6s??
haha was the "throttle body" shot at CSP lol
So what would the expected 60-130 time be for the 691/619 ls3 vette? Mid 5s?
I absolutely love a 6 gen Camaro ZL1 1LE. It looks so menacing. I am interested in what the black SS puts down with that F1-A. Did the grey C6 Z06 break numbers. I can't remember what's the highest one. Since ya'll are always breaking the internet.
I need cammed LS3 for my 73 TA 💪🏼Won’t happen though so my mild 455 goes high 12 low 13 and will do for now. Ran even with LS2 vette 60-110
Edit: I would love to see the ZL1 and blown LS3 vette in this video race. Would be a great one. From a dig and then from 60 or so. 👌🤘 I saw a procharged LS3 on north Texas street racing I think it’s called that walked from many fast cars. I bet this one runs like that.
i got a cammed ls3 im getting ready to pull out if your interested
Question gentleman..... What's the stuff flying out exhaust on Dyno? I've seen other cars doin it. Black grey white.
Great show guy's😎👍
I still wanna see that forklift cam install...
Was the ls3 cam specd for Na or fi? Or something in between like on a 114?
When do we get to see Mat's car ?
Excellence always👍
I had a thought hit me like a ton of bricks. Where do all the old cams and parts go? hahahahahaha
Wonder how much harder you could squeeze the ls3 if you threw a meth kit on it. My ls3 vette is getting her Novi kit and meth put on very soon i'm hoping to be in the 730-750whp range.
Pardon my ignorance, but why does the dyno graph always have MPH for the horizontal axis rather than RPM? Seems like RPM would much better.
We prefer it in speed, but will put in whatever the customer wants if requested.
the cameraman has watched the mechanic do that so many times I think they should switch places for a cam swap one day and see how they both do.
Can the lifters fall in if the cam isn’t put in quickly enough?
There are no lifters in the block when the cam is going in...
Sorry I meant when cam only and heads stay on. My bad 🙃
@@wesleybeeson1818 if I rember right there's a slot to put a dowel that holds the lifters while installing with the heads on
Im coppin a vette and bringin it here. Dont yall think it would be good to block out the license plates or take them off while recording video?
Why?
If people request it we can and have before, But 99% of people do not care.
Anyone can see your plates on the road....what’s the point?
Aaron Fisher specified interest when you watch a video
do you have your cams custom ground to spec for you ??
Not sure the question. How else would we get a custom cam?
@@RaceProvenMotorsports
Love the sarcasm. 👍
Does the supercharged C6 LS3 Corvette have a fuel system ?
The kit comes with a Kenne Bell Boost-A-Pump and Larger Fuel Injectors. Great Question. Its a great kit. A&A as well as ECS do a great job and both worked with Vortec/Paxtib engineering to get it right. Intercoolers are both different however.
@@plexidust5101 yeah I have the same kit I know what it comes with. I wouldn’t consider 60 lb injectors and a boost a pump a fuel system. I was referring too if they add a dual or Triple pump fuel system.
you guys have power packages for 01-04 zo6;s??
We only work on 2006 and newer vehicles
Another great question from me as usual lol. Are the valve covers just for looks or do they serve in some form of performance i.e cooling effects, more clearance or more fittings? I know the inserts are for looks but I don't know about the covers themselves. Thanks again and as you'll know y'all fuccin Rocc 💯💪🏾🦍
Purely cosmetic
@@RaceProvenMotorsports . Thank you as always and also for your timely response 💯
Still no reveal on the bad tuner from last episode.........🤔
Owner already said it’s only Been to tune time and ecs.
@@zenithskull Yes understood...still don't know who was the last to tune it. Also RPM seems to know who it is.
@@horsepowerdriven They have never bashed other tuners and they get plenty of hacked tunes.... at least not on camera.
It’s not our job to say who it is. It’s our job to make it right
Yeah I get it, not asking you to bash anyone. Just be nice to know. Keep up on the Sunday episodes
Damn whats the z06 record 😦 that mustve been so close
658whp & 564 tq in a recent video
That awkward silence as Matt lubed the cam got weird man.
Why do you guys have such a giant shop with only 2 techs ? Seems like you have plenty work to support more techs .
We do just fine with. 2. That’s how we prefer it
Is he pushing the limitations of the LS3 stock bottom end with 690RWHP?
No ls3 is fine at that level
Awesome
Lamborghini doors on a z06 🤦🏾♂️
At least he didn’t paint it purple and put it on 24’s.....
I love it my guys rpm keep up the work and I love the video and I love c6 zr1k lot 💯💯💯💯💯💯💯💯
Bro i needa see more of that purple sedan ss!
My g8 has 136k with heads/cam
No C5s, but 148k mile Pontiacs that leak rain water are cool? 🤔
A true behind the scenes...shutting the forklift off and closing the tank valve...what did we do to deserve that type of content?
Y’all don’t make nearly enough inappropriate noises when Matt’s sliding cams in
Imagine buying a ls2 and ls3 and dropping 20k in mods and blower just to loose to a c6z06 with cold air intake , msd manifold and headers leak
If you drop 20k into an ls2 or 3 that z06 doesn't stand a chance
This statement couldn’t be anymore false lol
Lmfao What
🤘🏻
Wario tuning 🤣
hi
lamb doors on a vett.... WTF....
Yaaaaaay another cookie cutter C6Z. They have got to be burned out on working on those cars by now.
Your a dick, just sayin. Dick.
first
Lambo doors kits, Im sure 16yr olds everywhere were excited. Turbo cringe
Do A&A/ECS intercoolers affect AC considering the location of the intercooler?