Testing the AOS Supernova by
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- The AOS Supernovas have finally arrived!
Took them out for a test flight and they are very smooth and cold enough to easily touch them after flying. So the efficiency claim seems valid and the power is really nice...
Also big thanks to RUSH for supporting me with the best antennas out there :))
This was a small practice run to test my drones for FAI WDRC 2023 in Korea next week.
Update: Ending up 51st overall and 32nd in qualifying :-) • FAI WDRC Korea 2023 51...
Also had luck and got floodlight flying thanks to SV Adelsried.
Some videos from past races to come soon.
Setup:
AOS Supernova 1980KV
RFPV SuperBrezn (our custom 6mm 56g frame)
MAMBA Reactor 66A
MAMBA MK4 F722 MINI FC
HDZero Race V3 VTX
ELRS EP1
Gemfan MCK V3
Tattu R-Line V5 1400mah 6S
Radiomaster Boxer ELRS
HDZero Goggles
Update from WDRC: the Supernovas have performed very well so far. Come out warm (not hot at all) from 3 laps on this monster full send track (place 32 in qualifying)… So thanks @ChrisRosser. I would consider the Supernova pretty competitive even for racing…
Trend here on Motors is actually not really obvious. There are also top pilots going for very light setups with smaller motors.
They sound sweet! Keep us posted on how well they hold up!💪👍
I will :)
Using them for my setup in the FAI WDRC in Korea.
That's awesome All the best to you!!!❤@@ArvinFPV
th-cam.com/video/-t6-kZ1PbuU/w-d-xo.html
Just saw the announcement video. Nice motors and good luck in Korea! Crossing fingers.
You keep improving Arvin!!
Can you take off a bell and measure the stator height and width? curious what size it actually is. if its not a 2207like chris says, it shouldnt be sold as such IMO
I think its more like an 2307.5 not measured and Chris asked not to provide detail figures. As weight its pretty comparable to a 2207 and performance is probably slightly better, I dont really care about the exact dimensions.
Pretty sure it's a 22.5x7.5
Half a millimeter wider and taller. That's kinda cheating calling it a 2207. Of course it has more power 😅
The physical dimensions don't matter. Thrust stand testing speaks for itself. I will be curious to hear results from other pilots that do proper thorough testing but the last thing i care about is the size of the motor
@@redacted1946 never heard such nonsence. They you might as well get a 2808 motor and it will have more thrust. If that is all that matters to you. A certain size and weight for a certain class is important for consistency and competition. Where are you going to draw the line? Ony guy will race 2207. Then the next one comes with a 2208 and is faster. Then comes the next with 2308 and beats them again.
Chris Rosser can make whatever eh wants, but dont call it a 2207 and say it is faster and more powerful, if it's just cheating with a bigger stator
@@chrisbee5481 the size does not determine if it's faster. and larger motor are typically lower in kv. he didn't say his motor was "fast". he provided data to prove it. Ofcourse it needs 3rd party validation but the size is irrelevant. it has no bearing on flight performance. if bigger motors are better why arent all top racers running huge motors? why has it taken years for the standard to shift from 2205 to 2306 to 2207? you can slap 2808's on a 5" right now so why not do it?
They look nice ;) Gg
im sure they fly great being rcinpower but how well do they crash?
So far not really easy to judge for me. For "normal" racing crashes I did not have any damage so far but also only low number of crashes. I killed two bells in a pretty nasty crash into concrete and rocks at full throttle though. But I do not think there are any motors around that would have survived this... In general the motors look very good quality and sturdy...
How bout the esc reactor does it good enough handle a few crash
Its probably the best ESC on the market right now ;-) So yes
Its probably the best ESC on the market right now ;-)
On the UK vendor websites this motor seems only to be rated up to 5s -is it ok for 6s?
On Chriss Rosser's website (one of the people that made this motor possible) it states that 5-6S can be used. Also, I'm sure that in this video 6S is used judged from the sound, video description and flight performance (sooo fast).
@@FlownByDjeden Thank you - I'll be picking up a set then!
Yes ;-)
The prop tip speed is a little too fast on 6s. (close to 700mph) that's why it can draw 60 amps per motor. You could scale the throttle back to 90% to get more efficient tip speeds of 620mph. Racers will want the extra top end torque. Freestylers may not use full throttle and would prefer more throttle feel at 90%.
Best motors on the world?
What is TOP speed?
103mph in speed trap at champs
@@ArvinFPV not so fast. I have rcinpower 2306 plus 1880kv. Top speed is 145-150km/h. Frame Roma F5, gps and vista
@@ArvinFPV I thought he was flying ~200km/h
No talking?
No
How is possible that you have them the same day they were anounced and nobody else do? Not even showing the actual drone, just a picture of the miniature... lying ?
He probably got them under the table from the first batch. He has many sponsors. Pro pilots generally get a lot of free gear from manufacturers directly. Not everyone is a consumer that just buys parts online. And clearly he didn't get them day 1 but had them for longer. He was probably under NDA and agreed to only show this video when the announcement was made. Like basically all fpv product launches
The Motors were announced in Chris Rossers Patreon a few months ago. I got some from the first production batch ;)
I see, sorry for my bad judgement :(