The throttle issue is not an issue. The scooter's program is set as push to start. Meaning you have to push off to ride the scooter then hit the throttle. This is a safety feature so the scooter doesn't take off by just pushing down on the throttle.
The connector in the upper neck portion is loose in neck causing a loose connector. Plug neck in, secure with hardware then remove small cover with power button and leave all wiring connected. Then look at the black 5 wire plug harness. It is probably crooked and too high causing either your power or motor to loose power connection. Use a plastic (not metal!) pry tool to push down on connector on sides and middle until rubber mold is flush with metal. This could very well be your problem, worked for me. If you ever have to remove the neck for any reason then obviously repeat this process to ensure a solid connection. Happy riding!
Please check on the top of the battery have 5 socket female connect to 5 pins male from the controller board then make sure it good contact and not burn, my scooter had 1 of the pins touch scooter chassis cause it melt to the sockets and create lost connection so I just clean up that connector & running fine.
This is my last alternative...wish me luck...my car in shop for a week...and damn I gotta get this scooter rolling again...hopefully that is the problem
I just saw that...and one of the male pins from controller board is melted in the plastic and sideways to a degree...the one on the end...if I fix that I am sure that's the reason why it's not running...EXCELLENT
OMG. Haven’t been able to start my GoTrax. I followed this video all the way to push start. Took things apart along with you. Head slap moment. Oops. As soon as I pushed it the throttle worked just fine. Thanks for the help.
You have to give it a little push and then hit the throttle it's the only way that these work. It's absolutely normal. They only move once you get them moving a little bit
I feel dumb, after watching this for just a couple minutes. It's called "Kick-To-Start" _or_ "Push-To-Start" most scooters will allow u to change that by going into the app. It's a safety feature so it don't take off right-away when you hit the Electric Go Button if you're unprepared.
That's not it dumb dumb if that was the case it would still at least turn on for you to do the push & throttle thing it's a power on problem not a riding problem
I was just about to scream at the video and then you just had to do that 1980’s pause and reflect moment then I was like okay now I have to watch this entire video lmao 🎉 great job man lol
when u first get on you have to push off then hit the throttle as far as taking the battery out i took mines out but i have the gotrax rival not sure if it's the same
From what I could see from your video, the magnets on the stater didn't look right. I think those should all be set in a nice even level and it looked like they were out of position. My guess is the seller had hit something and bent the axel and has those magnets out of position and binding up. I think that would explain why it worked once for you after you put them in place. Then once you put some weight on it that bent axel shifted out of position again and started binding up again. I also think that the nut that was lose or off is no coincident. It may or could have cause a bent axel or vise versa. Your thoughts? I liked your video dispite of no fix.
When you began separating the inside of wheel, you need to keep pulling and it will separate all the way and you can pull the whole middle out. Then you need to get all your magnets lined up straight ( may need to use adhesive on those 5). Reassemble and it will be nice and smooth.
This scooter works by rolling it first and then the accelerator is activated, this brand works that way for safety, there is nothing wrong with it, it will not start if it is completely stopped, you can ask the manufacturer.
I got my grandsons Gotrax dince my dsughter eas about to scrap it. I found that charger and the port was damaged and battery was drsibed. After replacing the port snd charge it with new charger, the battery was full but could not go. Im searching the info on you tube and your video came up. Perfect timing. Thanks
Wonder if one of the battery cells is dead/dying and causing the power to cut off? If you could charge them somehow and see if that makes it function again? Another possible thing to check are the voltages coming out of the controller and/or going to the motor when you turn the throttle (with the wheel spinning).
No it's the plastic harness on the 5 pin male connection at bottom of handle bars the harness is plastic and gives in and disconnects and will reconnects only to faulter again
Didn't You have a loose nut when you took it apart the first time? The weight of it could have warped the motor enough to ground out or touch the magnets where it can't spin I think that brushless motor is done
hola tengo un patinete gotrax bajé una pendiente con el freno motor y de repente dejo de frenar y ahora frena llaneando y poca bajada pero veces a velocidad ya bo frena el freno motor ,q se abrá roto ??? placa o motor o es facil arreglarlo yo o bá a ser nesesario comprar piezas
Take of your bars with Allen key,check the wiring hasn't separated. Then check nothings come loose between battery and controller in the bottom.,12 screws.
Can anyone here help my electric scooter works perfectly fine but once push off and throttle hits max speed it turns off and iv got to plug in charger again to get to work again and it repeats
el patinete no arranca solo ay que empujar un poco y luego aselerar y actua el motor , es un sistema de seguridad para q si tocas el aselerador estando parado no salga disparado el solo
So i was just given one of these as broke it would work intermittently I broke it down put electrical grease into all the connections and pins works great now
This scooter works by rolling it first and then the accelerator is activated, this brand works that way for safety, there is nothing wrong with it, it will not start if it is completely stopped, you can ask the manufacturer.
Found out there was a pin that had melted the plastic around it...once I pulled the pin out some...it reconnected...scooter runs perfect now....u MUST BE OBSERVANT when looking at ALL ur connections...if those pins are not touching what they are suppose to touch...IT WILL NOT RUN
can u help me? my scooter got a big bump bc it fell and now whenever I turn it on it goes into smth like cruise mode and it keeps moving at the same speed untill I brake or turn it off so I went to the app and tried to turn off cruise mode but it didn't work so I turned on start and zero speed so I pushed it but then it still doesn't work I tried pressing the button and it didn't work and I don't know how to open it
Also I've had a ebike and cut the hall wires completely off just left the power wires on and it worked. They r for taking off nice and easy. I think that it would work on the scooter as well. As a last resort I would do it.
Doesn't have that type of brake system. They work by pressing brake shoes against the inside of a drum attached to the wheel, creating friction and slowing or stopping the scooter
I picked up a gotrax g2 for free. All I needed was a battery charger. I found one on Amazon and now the battery is charged. However, the motor doesn’t work unless you spin the front wheel then hit the accelerator. After watching another TH-cam video that is how they work. The motor doesn’t go until you give it a push or hold it up and spin the front wheel. That is just how it is I guess.
My scooter runs and quits after a minute of riding the screen turns off , batteries individually voltage ok at 3.9 , battery indicator at 3/4 and not charging from wall , so possibly cells capacity problem, I will try to manually cycle the battery pack
Try switching the battery to a different one may be able to see as they replace them every few years so unfortunately if it's a few years old I definitely needs a new battery but they are designed that way
This is a kick to start btw. I am working on same one also. That’s why I came here. Probably the battery as I watched this I was taking mine apart the wires were split so shorting out connection
On mine, the purple wire going through the board lost its saulder connection, remove the 5 screws on the board and 1 holding the wires and check connectors on back of board
Pos for sure. Mine falls over unless I put down this springy lever thingy on the side. Just keeps falling over. I really shouldn't have to force that lever thingy down. Darn what could it be? Getting all banged up constantly falling over.😂
my frend if yu stand on a skewter and engage a moter yu will slide out on mud ice etc that it why it iz much safer to push yourself and the skewter forwerds ferst herby overcuming the initial inertia required to accelerate to a walking speed then press the throtle this will also reduce a lot of strees on the moter which will prolong the life of your moter
I have question on mine I can’t get it to charge more than 3bars and when I ride with 3 bars the battery dies in 5 min I’m assuming it’s a bad battery can anyone help with this
*All* *because* *of* *ignorant* _WoW_ this guy just destroyed a perfectly working scooter. It's a _safety_ _thing_ so the scooter knows you're underway first before applying energy. A scenario would be if ur standing on the side of the road and you accidentally hit the throttle the 🛵 just don't fly out from underneath of you and into the road. You should have looked up the terms Push-2-Start & Kick-2-Start. There's away to change it on almost all scooter apps. They come from the factory in the safety mode you have to manually change it through the app if your scooter has an app that has that option in the app now you know
No it's not it's a safety thing so the scooter knows you're underway first before applying energy. A scenario would be if ur standing on the side of the road and you accidentally hit the throttle the 🛵 just don't fly out from underneath of you and into the road.
I fixed it under battery cap bottom side the conection loose or broken stupid front motor hit curb too hard all the force on the battery pegs broke 2 difrent scooter this way
So we pretty much all have been through the embarrassing realization of learnthe meaning of kick scooter It sounds like the controller is overheating. Replace it and you should be good.
My son spent 2 hours on his bike following along with exactly what you did just to find out that he “broke his scooter beyond repair.” You should at least add a disclaimer so people know you messed up your bike.
I only came to this video so i could figure out how tf i get to the consle so i could my gotrax scooter to go above 15 mph and mod the battery anyways kick to start the scooter is not an issue but a safety function they legally have to do
The throttle issue is not an issue. The scooter's program is set as push to start. Meaning you have to push off to ride the scooter then hit the throttle. This is a safety feature so the scooter doesn't take off by just pushing down on the throttle.
My friend gave me a "broken" scooter, so I looked up how to fix. So yeah good comment!
Wdym by “broken” what was it doing
@@MontyMontero-fk6hv It was not broken. She just didn't know that you need to push off to ride and told me it's broken.
The connector in the upper neck portion is loose in neck causing a loose connector. Plug neck in, secure with hardware then remove small cover with power button and leave all wiring connected. Then look at the black 5 wire plug harness. It is probably crooked and too high causing either your power or motor to loose power connection. Use a plastic (not metal!) pry tool to push down on connector on sides and middle until rubber mold is flush with metal. This could very well be your problem, worked for me. If you ever have to remove the neck for any reason then obviously repeat this process to ensure a solid connection. Happy riding!
This dude did all this work for a functioning scooter! LOL
And you sat and watched it. Lol
Please check on the top of the battery have 5 socket female connect to 5 pins male from the controller board then make sure it good contact and not burn, my scooter had 1 of the pins touch scooter chassis cause it melt to the sockets and create lost connection so I just clean up that connector & running fine.
I will definitely check that when I get a chance!
This is my last alternative...wish me luck...my car in shop for a week...and damn I gotta get this scooter rolling again...hopefully that is the problem
I just saw that...and one of the male pins from controller board is melted in the plastic and sideways to a degree...the one on the end...if I fix that I am sure that's the reason why it's not running...EXCELLENT
OMG. Haven’t been able to start my GoTrax. I followed this video all the way to push start. Took things apart along with you. Head slap moment. Oops. As soon as I pushed it the throttle worked just fine. Thanks for the help.
You have to give it a little push and then hit the throttle it's the only way that these work. It's absolutely normal. They only move once you get them moving a little bit
I tried that and still not turning on and left it to charge and still nothing
I feel dumb, after watching this for just a couple minutes. It's called "Kick-To-Start" _or_ "Push-To-Start" most scooters will allow u to change that by going into the app. It's a safety feature so it don't take off right-away when you hit the Electric Go Button if you're unprepared.
They have safe mode and you have to push off. Then there is the mode that doesn't need a push off
on my Iscooter max.
This guy's a idiot or he'd of not made a video trying to fix something that's software addressable
That's not it dumb dumb if that was the case it would still at least turn on for you to do the push & throttle thing it's a power on problem not a riding problem
I was just about to scream at the video and then you just had to do that 1980’s pause and reflect moment then I was like okay now I have to watch this entire video lmao 🎉 great job man lol
Ssame 😂❤😂
“I gotta understand why it won’t start up from standing still”….. LMFAO!!!!😅😂😂🤣🥵😥😅🤣🤣
when u first get on you have to push off then hit the throttle as far as taking the battery out i took mines out but i have the gotrax rival not sure if it's the same
From what I could see from your video, the magnets on the stater didn't look right. I think those should all be set in a nice even level and it looked like they were out of position. My guess is the seller had hit something and bent the axel and has those magnets out of position and binding up. I think that would explain why it worked once for you after you put them in place. Then once you put some weight on it that bent axel shifted out of position again and started binding up again. I also think that the nut that was lose or off is no coincident. It may or could have cause a bent axel or vise versa. Your thoughts? I liked your video dispite of no fix.
He just demonstrates how to distroy a working scooter... Go straight to garbage bin! Bravo 👏
When you began separating the inside of wheel, you need to keep pulling and it will separate all the way and you can pull the whole middle out. Then you need to get all your magnets lined up straight ( may need to use adhesive on those 5). Reassemble and it will be nice and smooth.
Can u tell me what u think the problem. If the battery light stays on but it won't move?
This scooter works by rolling it first and then the accelerator is activated, this brand works that way for safety, there is nothing wrong with it, it will not start if it is completely stopped, you can ask the manufacturer.
its also for extending battery life- much less power required to start from a roll than a stop.
I got my grandsons Gotrax dince my dsughter eas about to scrap it. I found that charger and the port was damaged and battery was drsibed. After replacing the port snd charge it with new charger, the battery was full but could not go. Im searching the info on you tube and your video came up. Perfect timing. Thanks
Wonder if one of the battery cells is dead/dying and causing the power to cut off? If you could charge them somehow and see if that makes it function again? Another possible thing to check are the voltages coming out of the controller and/or going to the motor when you turn the throttle (with the wheel spinning).
No it's the plastic harness on the 5 pin male connection at bottom of handle bars the harness is plastic and gives in and disconnects and will reconnects only to faulter again
Didn't You have a loose nut when you took it apart the first time? The weight of it could have warped the motor enough to ground out or touch the magnets where it can't spin I think that brushless motor is done
hola tengo un patinete gotrax bajé una pendiente con el freno motor y de repente dejo de frenar y ahora frena llaneando y poca bajada pero veces a velocidad ya bo frena el freno motor ,q se abrá roto ??? placa o motor o es facil arreglarlo yo o bá a ser nesesario comprar piezas
When u push the throttle down it that connection that may not be touching maybe?
Just bought mine a hour ago and it cropped out already. I know you have to push off to get it to start. But it still doesn’t work
How do you take off brake sensors on it vecause im tryna drift better
My gotrax scooter has a E2 I believe error 2 what do I do?
is there fuses in gotrax apex electric scooters
Can you help? I can’t get our new scooter to even turn on? Under a year old. Says it’s charging but the screen will not turn on.
Take of your bars with Allen key,check the wiring hasn't separated. Then check nothings come loose between battery and controller in the bottom.,12 screws.
Can anyone here help my electric scooter works perfectly fine but once push off and throttle hits max speed it turns off and iv got to plug in charger again to get to work again and it repeats
I have the same problem too, very frustrating
That’s what happening to mine right now, it goes then stop and I have to turn it off and on again to make it start again
el patinete no arranca solo ay que empujar un poco y luego aselerar y actua el motor , es un sistema de seguridad para q si tocas el aselerador estando parado no salga disparado el solo
So i was just given one of these as broke it would work intermittently I broke it down put electrical grease into all the connections and pins works great now
gotrax -apex no power is there a fuse i can change
My gotrax scooter has a E2 on my screen what do I do please help
But if you don't think you can use it I need the up part of the shooter I need it for work😢
Having the same problem with mine and pulled it apart and find nothing. Maybe it's the board itself
This scooter works by rolling it first and then the accelerator is activated, this brand works that way for safety, there is nothing wrong with it, it will not start if it is completely stopped, you can ask the manufacturer.
I am going thru the same EXACT PROBLEM...HELP NEEDED HERE TO FIGURE THIS OUT
@@brianjordan3947 it’s supposed to do that it’s a safety feature
Found out there was a pin that had melted the plastic around it...once I pulled the pin out some...it reconnected...scooter runs perfect now....u MUST BE OBSERVANT when looking at ALL ur connections...if those pins are not touching what they are suppose to touch...IT WILL NOT RUN
@@brianjordan3947where is this pin located?
can u help me? my scooter got a big bump bc it fell and now whenever I turn it on it goes into smth like cruise mode and it keeps moving at the same speed untill I brake or turn it off so I went to the app and tried to turn off cruise mode but it didn't work so I turned on start and zero speed so I pushed it but then it still doesn't work I tried pressing the button and it didn't work and I don't know how to open it
Also I've had a ebike and cut the hall wires completely off just left the power wires on and it worked. They r for taking off nice and easy. I think that it would work on the scooter as well. As a last resort I would do it.
Your disk brake caliper is missing from the rear and the brake lever is not on handlebar
Doesn't have that type of brake system. They work by pressing brake shoes against the inside of a drum attached to the wheel, creating friction and slowing or stopping the scooter
I picked up a gotrax g2 for free. All I needed was a battery charger. I found one on Amazon and now the battery is charged. However, the motor doesn’t work unless you spin the front wheel then hit the accelerator. After watching another TH-cam video that is how they work. The motor doesn’t go until you give it a push or hold it up and spin the front wheel. That is just how it is I guess.
My scooter runs and quits after a minute of riding the screen turns off , batteries individually voltage ok at 3.9 , battery indicator at 3/4 and not charging from wall , so possibly cells capacity problem, I will try to manually cycle the battery pack
Try switching the battery to a different one may be able to see as they replace them every few years so unfortunately if it's a few years old I definitely needs a new battery but they are designed that way
Yes bt they aren't cheap A new battery for my gotrax cost $130
Operator valve is not working
This is a kick to start btw. I am working on same one also. That’s why I came here. Probably the battery as I watched this I was taking mine apart the wires were split so shorting out connection
Which wires were split?
On mine, the purple wire going through the board lost its saulder connection, remove the 5 screws on the board and 1 holding the wires and check connectors on back of board
Mine shows e2??
Mine wont turn on when plug it in the green light turns off and now it won't turn at all
Pos for sure. Mine falls over unless I put down this springy lever thingy on the side. Just keeps falling over. I really shouldn't have to force that lever thingy down. Darn what could it be? Getting all banged up constantly falling over.😂
my frend if yu stand on a skewter and engage a moter yu will slide out on mud ice etc that it why it iz much safer to push yourself and the skewter forwerds ferst herby overcuming the initial inertia required to accelerate to a walking speed then press the throtle this will also reduce a lot of strees on the moter which will prolong the life of your moter
I have question on mine I can’t get it to charge more than 3bars and when I ride with 3 bars the battery dies in 5 min I’m assuming it’s a bad battery can anyone help with this
Me puso lo mismo. Significa que tu batería ya no va para más. Tenes que sustituirla por otra, nueva o con poco uso. Saludos
I have this same model but mine doesn't turn on, battery is charge and all but it simply doesn't turn on doesn't show km/h, zero, just battery charge.
These scooters are made to not go when pushing the throttle. You have to push the scooter to get it going. That scooter is not broken!
Hey do you still have the scooter? Can you message me?
Why doesn't my headlight work
You have to give it a push to start it
Mine won't even come on anymore
*All* *because* *of* *ignorant*
_WoW_ this guy just destroyed a perfectly working scooter. It's a _safety_ _thing_ so the scooter knows you're underway first before applying energy. A scenario would be if ur standing on the side of the road and you accidentally hit the throttle the 🛵 just don't fly out from underneath of you and into the road.
You should have looked up the terms Push-2-Start & Kick-2-Start. There's away to change it on almost all scooter apps. They come from the factory in the safety mode you have to manually change it through the app if your scooter has an app that has that option in the app now you know
Reading the comment I push off for it to start but it won’t start it still at 0
Low load capacity on the battery. May need a new battery. Or a new motor.
Try the throttle the inside of the throttle
Mine just randomly shuts itself off when I’m riding it help?
You have to push off to get the. Scooter to go
its a safety thing so you dont overwork the motor
No it's not it's a safety thing so the scooter knows you're underway first before applying energy. A scenario would be if ur standing on the side of the road and you accidentally hit the throttle the 🛵 just don't fly out from underneath of you and into the road.
I fixed it under battery cap bottom side the conection loose or broken stupid front motor hit curb too hard all the force on the battery pegs broke 2 difrent scooter this way
If I were you I would change the wheel hub to the back position on the scooter
So we pretty much all have been through the embarrassing realization of learnthe meaning of kick scooter
It sounds like the controller is overheating. Replace it and you should be good.
My son spent 2 hours on his bike following along with exactly what you did just to find out that he “broke his scooter beyond repair.” You should at least add a disclaimer so people know you messed up your bike.
I just tried to charge ot with a battery jumper and made a loud pop sound I damn near shit myself
This guy's on a good one
It's a push start
Mine has defective handle bar board. No power either from battery or charger. $67 for new handlebar. Problem solved.
I only came to this video so i could figure out how tf i get to the consle so i could my gotrax scooter to go above 15 mph and mod the battery anyways kick to start the scooter is not an issue but a safety function they legally have to do
Anyways most likely the throttle switch is damaged, it has probably worn out from friction
I have the same one But mine is missing the battery and they want almost $350 just for battery new scooter is same price anyone selling used one
Used hub motor is 30-40 bucks
GOTRAX is a POS - rusty parts on arrival and electronics dont work on mine
Its a kick scooter bro it wont go till u give it a push start !! LMAO 🤣😂 omg
OMG, Is red button even turned on? Like it was mentioned, you need to give it a scoot to make it run smh
the reason why they are called kick start scooters
I got same scooter
Keep up the great work
why even post this?
You slow 😂😂
Moteure
You can get a replacement console for $60 fron gotrax You dont have to mess with any wires It plug and pay I had to buy one for mine