I'm am really impressed it drives my jvc car subwoofer that rated 150w RMS 1300w nicely at 100w and bass was nice. The power supply I used it is Lite-On 20v 4.5amps.
Why am I watching this? My AV receiver already has line-level subwoofer output. No matter how cool it is to have a proper, separate subwoofer amp, I can never get this to work with my receiver in surround sound mode. 😩 Love this handheld, tutorial kinda video when it comes to home audio stuff. It shows the real situation what, where and when to use certain equipments. Thanks man!
Got the Nobsound (lol) G2 pro last week to power my smaller 10" sub, the one that intergrates with the mains... Just enough power for the job, seems to be making a good job of it so far, and leaves the big boy 2x400w amp free for a 15" each channel. It's kinda exciting what china are making available at reasonable prices these days eh.
Hi there thanks for the nice comment. I got it from here www.caraudiocentre.co.uk/product_m-in-phase-car-audio-xt-8_p-31955.htm But it was cheaper when I bought it. Hope that helps
Will this work only with subs? I have a single speaker in my front yard and only get one channel from my stereo amp. Since this says it’s Mono. I want to know if I can music regularly from a non subwoofer for mono sound
If I remember right it accepts various voltages not sure about 24v 6a tho. In regards to the bass shakers it depends on your final ohm load, I think this is 4 ohm lowest it accepts I could be wrong tho
Can i connect a 300w rms sub with it ? Or to my amp which does 135 watt at 4ohms ? Will the bass be clean and deep ? Also will it be loud Speaker sensitivity is 94db
Just from the look of your subwoofer. I think you need at least a 200-watt amp & above to drive that subwoofer. ( you need to check the power handling of your sub) just out of curiosity. what was the price of that sub? I'm looking into buying an internal subwoofer amp. and most of the subwoofer amps on Amazon look the same way as yours. I was trying to figure out where exactly that 3.5 mm jack is hooked up to. I couldn't figure it out. now I know lol. I think I'm going to use a subwoofer plate. but thanks for the video. cheers.
Cheers for the comment dude, I got the sub when it was on sale for about 40 quid. Think it's about 80 now it's a good little woofy tho. It could handle way more than that little amp gives bit it did the job OK. I think the sub is 400rms if I remember right.
@@GoRY69R you got a really good deal on that sub. usually, a sub like yours is close to 200$ on Amazon. I try to stay away from eBay. for a number of reasons. I usually shop at Amazon. just a couple of days ago I ordered 3 spools of high-quality speaker wire. I ordered 3x100 foot wire. and one spool looked like it's half (50 foot) I called them up. they're sending me a free 100-foot spool. (even though I only asked for 50.) it's not to suggest that Amazon is perfect. they're not..... thanks for your heart...stay safe.
@@bradenclifton45 it's the inphase XT8 dude, it's a pretty solid little sub for the money. I heard somewhere that it uses the same parts as one of the DD audio subs
Reeeeaaally need to hear this in a box (yes I know through TH-cam (and even through my Technics A class amp and 4 good quality speakers) wont give the true effect, but, it'll give us a better idea... 🤔 😏 Plus, try out TH-cams - My Other mind (2nd channel to My Stoner Mind)s video "SPL (Subwoofer Piano Ligma) [BASS BOOSTED]" Sub test video.... 👍😏 😎🇬🇧
@@GoRY69R Oh and forget the 'needs to be in a box...' comment, coz nobhead here found your next one that did have the enclosure.. hahahaha sounds good though, and looks like a viable option for what I'm looking for in this size of room I'm using... But, yeah, I also have a chuckle at his sense of humour hahaha 👍😎🇬🇧
Hi... you need both the left and right channel input. Once the signal reaches the preamp it is merged into a mono signal. If you use only one channel You’ll miss some of the audio information. If you’re watching a movie and something happens on the right side but you only have the left side connected the subwoofer will not give you the sound of that door closing. Since you are redirecting the bass from your main speakers to the subwoofer you need to have both channels connected so that the bass responds correctly to both channels.
Mario Grillo it's a mono amplifier 🤦🏾♂️ watch the video again the part at 1:34 there isn't a stereo input. There is only a 3.5mm jack input and + & - terminals for the speaker wire. If it had a stereo input like a stereo amplifier it would have two RCA inputs for the left and right speakers. Plus a extra + & - terminals for the other speaker 👍🏾
Omg, that's 12 minutes of my life I'll never get back. It's 12 and not 18 because I was playing it back at 1.5x speed and I was still crawling out of my skin by the end. Never heard a damned thing from the speaker, but ok. You do you!
It is short for Route Means Square, and refers to the actual power a device is capable of of producing. When companies use the term "maximum power" it doesn't really mean anything it is just a figure that they use to make their product seem better than it is.
I'm am really impressed it drives my jvc car subwoofer that rated 150w RMS 1300w nicely at 100w and bass was nice.
The power supply I used it is Lite-On 20v 4.5amps.
What's impedance? You use the amp at max vol?
does this have a built in crossover?
Women love da wattz
Why am I watching this? My AV receiver already has line-level subwoofer output. No matter how cool it is to have a proper, separate subwoofer amp, I can never get this to work with my receiver in surround sound mode. 😩 Love this handheld, tutorial kinda video when it comes to home audio stuff. It shows the real situation what, where and when to use certain equipments. Thanks man!
i got one for my Skar audio IX8 D4. impressive little amp!
Not a bad little bit of kit
Got the Nobsound (lol) G2 pro last week to power my smaller 10" sub, the one that intergrates with the mains... Just enough power for the job, seems to be making a good job of it so far, and leaves the big boy 2x400w amp free for a 15" each channel. It's kinda exciting what china are making available at reasonable prices these days eh.
Sounds cool mate, it's incredible the stuff they send over here TBF
i guess I am kinda off topic but do anyone know a good place to watch new movies online ?
@Hayden Harley Flixportal :P
@Benton Harley thank you, I signed up and it seems to work =) I really appreciate it!
@Hayden Harley you are welcome xD
I think you connect mini amp with yamaha .. u need to up the volume also in yamaha...
So, do we need the Yamaha amplifier or can I use male to male 3.5 Aux for my computer's audio signal?
You can use your computer's signal but the nobsound only produces basssssssss
Hey man, awesome work with video, was hoping if you could tell me why you got the Subwoofer from, it'll really be a help to me...
Cheers
Hi there thanks for the nice comment. I got it from here
www.caraudiocentre.co.uk/product_m-in-phase-car-audio-xt-8_p-31955.htm
But it was cheaper when I bought it. Hope that helps
Will this work only with subs? I have a single speaker in my front yard and only get one channel from my stereo amp. Since this says it’s Mono. I want to know if I can music regularly from a non subwoofer for mono sound
Hiya this model is only for subwoofers
Can i use a 24v -6A power brick or it may damage the amplifier. Is it good to hook 2x100w bass shakers in paraller wiring?
If I remember right it accepts various voltages not sure about 24v 6a tho. In regards to the bass shakers it depends on your final ohm load, I think this is 4 ohm lowest it accepts I could be wrong tho
Can i connect a 300w rms sub with it ?
Or to my amp which does 135 watt at 4ohms ?
Will the bass be clean and deep ?
Also will it be loud
Speaker sensitivity is 94db
Yes mate you can, sorry took so long to reply I only just saw your comment mate
What are you using for a crossover? And why are you using a dual voice coil speaker with a mono amp?
Just from the look of your subwoofer. I think you need at least a 200-watt amp & above to drive that subwoofer. ( you need to check the power handling of your sub)
just out of curiosity. what was the price of that sub?
I'm looking into buying an internal subwoofer amp. and most of the subwoofer amps on Amazon look the same way as yours. I was trying to figure out where exactly that 3.5 mm jack is hooked up to. I couldn't figure it out. now I know lol.
I think I'm going to use a subwoofer plate. but thanks for the video. cheers.
Cheers for the comment dude, I got the sub when it was on sale for about 40 quid. Think it's about 80 now it's a good little woofy tho. It could handle way more than that little amp gives bit it did the job OK. I think the sub is 400rms if I remember right.
@@GoRY69R you got a really good deal on that sub. usually, a sub like yours is close to 200$ on Amazon. I try to stay away from eBay. for a number of reasons. I usually shop at Amazon. just a couple of days ago I ordered 3 spools of high-quality speaker wire. I ordered 3x100 foot wire. and one spool looked like it's half (50 foot) I called them up. they're sending me a free 100-foot spool. (even though I only asked for 50.) it's not to suggest that Amazon is perfect. they're not..... thanks for your heart...stay safe.
How much did you get it for I think it uses a cheap amp on the inside since the layout is the same you can get 3 of them for £10
It wasn't expensive dude maybe 15 quid
a question is connected in (Subwoofer PRE OUT) ??
Yes it is
Can i connect a 150w sub to it?
Yes you can
ok the sub barly moves need more power. but good job man not tying to hate
Cheers dude, I have moved it through to my music set up now and it likes it much more on there.
Mr Gory what sub is that
@@bradenclifton45 it's the inphase XT8 dude, it's a pretty solid little sub for the money. I heard somewhere that it uses the same parts as one of the DD audio subs
@@bradenclifton45 the video of it hooked up on my music set up is on my chanel if you want to check it out
Mr Gory dang i will look in to it
what is the source? it is the sub output from the yamaha amp
Indeed it is
Reeeeaaally need to hear this in a box (yes I know through TH-cam (and even through my Technics A class amp and 4 good quality speakers) wont give the true effect, but, it'll give us a better idea... 🤔 😏 Plus, try out TH-cams - My Other mind (2nd channel to My Stoner Mind)s video "SPL (Subwoofer Piano Ligma) [BASS BOOSTED]" Sub test video.... 👍😏 😎🇬🇧
Cheers dude, I like my stoner minds videos I got him on my subscription 😀 I'll check out the second chanel
@@GoRY69R Oh and forget the 'needs to be in a box...' comment, coz nobhead here found your next one that did have the enclosure.. hahahaha sounds good though, and looks like a viable option for what I'm looking for in this size of room I'm using...
But, yeah, I also have a chuckle at his sense of humour hahaha 👍😎🇬🇧
What is the ohms it can take?
Hi jess the lowest ohm load it takes is 2ohm
@@GoRY69R Last question what cables would I need to connect this amplifier to the AV receiver?
@@maincharacter2677 hi 3 mins in on the video I show the wires and how to do it
@@GoRY69R Life saver!
All
Why does it have a stereo input if it's a mono amp?
I suppose it needs both inputs to make the power. I dunno tbh, probably cos it's made in China
Hi... you need both the left and right channel input. Once the signal reaches the preamp it is merged into a mono signal. If you use only one channel You’ll miss some of the audio information. If you’re watching a movie and something happens on the right side but you only have the left side connected the subwoofer will not give you the sound of that door closing. Since you are redirecting the bass from your main speakers to the subwoofer you need to have both channels connected so that the bass responds correctly to both channels.
Mario Grillo it's a mono amplifier 🤦🏾♂️ watch the video again the part at 1:34 there isn't a stereo input. There is only a 3.5mm jack input and + & - terminals for the speaker wire.
If it had a stereo input like a stereo amplifier it would have two RCA inputs for the left and right speakers. Plus a extra + & - terminals for the other speaker 👍🏾
@@C--A it's a stereo INPUT. I made a special cable by connecting the 2 channels together.
What sub is that
Inphase xt8
Omg, that's 12 minutes of my life I'll never get back. It's 12 and not 18 because I was playing it back at 1.5x speed and I was still crawling out of my skin by the end. Never heard a damned thing from the speaker, but ok. You do you!
Go fuck yourself Keith
@@GoRY69R lol Haters gonna hate Because the haters don’t got what you got btw I like your house
@@leosvids1297 cheers dude, the funny thing is he looks old enough to know better lol
@@GoRY69R yeah he does look old enough to act like a kid Mr Gory just sub to you
@@leosvids1297 thanks very much dude, its appreciated. My channel is a bit of a mixed bag of stuff lol
lol Gamecube gang
what is RMS?
It is short for Route Means Square, and refers to the actual power a device is capable of of producing. When companies use the term "maximum power" it doesn't really mean anything it is just a figure that they use to make their product seem better than it is.
the running power is 400w = RMS .
Tooo much talking
Next time I'll make a silent movie about audio product just for you smh