BigTreeTech SKR 1.4 - Basics
ฝัง
- เผยแพร่เมื่อ 22 ธ.ค. 2019
- This is a basics tutorial showing how to setup the BigTreeTech SKR v1.4 with Marlin firmware and Vscode with PlatformIO extension.
SKR 1.4 Playlist:
• SKR 1.4 Tutorials
One Time Tips, You Can PayPal Me:
www.paypal.me/EBraiman
Discord:
/ discord
buymeacoffee:
www.buymeacoffee.com/ebraiman
Patreon:
/ edbraiman
Hardware:
1 - BigTreeTech SKR 1.4
1 - USB Serial cable
1 - SD/TF drive with adapter
Amazon Affiliate Links:
amzn.to/2NDH617 (SKR v1.4)
amzn.to/2ZqA0SU (Micro SD adapter)
amzn.to/2Y3cwRc (Acer Nitro 5 Laptop)
Software:
Marlin Firmware 2.1.x marlinfw.org/meta/download/
Vscode code.visualstudio.com/download#
Documentation:
github.com/bigtreetech/BIGTRE...
Pronterface:
www.pronterface.com/
Thingiverse:
www.thingiverse.com/thing:407... - วิทยาศาสตร์และเทคโนโลยี
![24 ชั่วโมง ซื้อของสีเดียว!! [Ver.2024]](http://i.ytimg.com/vi/TNPgzIMr_w8/mqdefault.jpg)
Very good tutorial and easy to learned. Thanks edward!
perfect timing, was upgrading a larger printer and I needed dual Z and an easier way of config auto bed leveling
Thanks.
Yeah ! Ordered mine this morning :D Thanks a lot, again :D
Merry christmas to all
Np.
I can't wait for mine to arrive 😱
just an additional Information, Marlin "Nightly" Builds - bugfix-2.0.x Version allready includes the SRK 1.4 board. IMHO it might be the better choice than 2.1 development version. Thank you for your detailed, informative videos.
You're correct. Yesterday on release build I didn't see. I jumped to 2.1.x build first without checking nightly.
Nice. Got a great introduction from this video, Now I just have to configure it for my setup, I think this has helped me at least understand the Platform IO software enough so i can proceed.
Thanks.
Great Job.! Very easy to follow. When you do a "search" in Visual Studio Code to locate the board it took me a while to realize I needed to use the find command. Edit>Find not View>Search.
Thanks. I normally use, cltr+f for find.
I couldn't connect to the V1.4 turbo card with the computer no matter what I tried. I saw you had a video on how to use just the card, I thought awesome. Compiled the firmware, sent it to the drive, it updated the firmware on the card. I installed it in the board, I have the board connected up to the printer already, but it still shows no printer attached on the screen. I sure hope they didn't sent out a bunch of Turbo cards that didn't work. Big Tree Tech is not responding to any emails I sent. Thanks for your instructional videos and your time involved in making them for us all.
you're welcome.
Did you get the TFT display to work?
@@EdwardBraiman I did, but the first one failed, the chip on the card would get over 200 F and the screen went black. The second one is working, but I only have the touch screen part, which is what I wanted any way. All the cables have to be connected or it won't work. I even tried it using the port 1 from the driver card to port 3 as BTT instructions say to do, but still no old school display using the knob. I went through 4 driver boards and finally the 4th driver board worked. The printer is so quiet now and the prints are outstanding. Thanks for your videos, they helped me out a lot.
Good to hear everything is working well.
Seems like a nice board. I just ordered the turbo 120hz version with the extra's and a 3.5"touch screen
Hey Doug, when you install it let me know if the motherboard BOARD_BIGTREE_SKR_V1_4 worked for the Turbo. BTT released a new version of the boards.h with an additional board called BOARD_BIGTREE_SKR_V1_4_Turbo. It's not in Marlin 2.1 yet and I'm unclear whether it makes a difference
@@omnomnomnivore2766 Will do. Hopefully I should have the board and stepper motors by sat 1-4-20 and have the board programmed and powered this weekend. I did see that biqu had updated there fw so I'll try that first.
@@omnomnomnivore2766 I was able to get the board up and running. it is the LPC1769 chipset. The firmware is listed under the 1.3 version. I don't yet have the board installed since I'm still building a DYI printer but the board works with the stepper motors on the bench. I also added the 3.5in v2 tft as well. With out videos like these, Thank you Edward Braiman" it wouldn't be possible.
You're welcome.
Hi and thanks for the effort you put into this. I want to add a controller fan but it wants a pin number assigned, can't find anything that deep. Can I use the touch probe pins (0.10) if not used?
Google, "btt GitHub SKR 1.4", go-to hardware for SKR 1.4 folder and look for file name with pins in it.
On a side note if I may. Is there any good/easy way or good practices to handle several different printers as well as making updates between versions?
I will use Marlin 2.x on a 8-bit Ender 3 (stock board) and a Ender 5 Plus (with SKR v1.4 & TMC2209's), those will be quite different.
Well practice and source control like Got or SVN. I normally test configurations in small units and then combine what works. It's very similar to the videos.
Hi Edward, thanks for this video. May I ask you some help please? I'm stuck with the wiring of this board in a Sapphire Plus V2 (dual Z with dual endstops). Where must I plug the 2nd Z endstop please? Thanks sooo much in advance!!
Over on my Discord in the description in general chat either myself or someone else can help, but remember you need to pass it on.
So I bought the skr 1.4 turbo with steppers combo from Amazon. However I was sent the the 1.4 non turbo. The label was wrong on the box and they offered me a discount for the mixup and cost was only 16 bucks from the 60 that it would have been. I technically had no reason to get the turbo as compared to the regular other than having the best version. I'm probably only gonna use the wifi and steppers and maybe at some point an auto bed leveler. I use all the time and is pretty much on and running constantly apart from readying the next print. But i use it for hobby and not commercial. And this is going on the ender 3 original and not pro. So my question is, is the turbo that much better that I should def get it. Or is the normal version all I'll need for my type of use. Cuz 15 bucks is hell of markdown from the 60 it would cost and I'd be dumb to switch it for very little improvement?
Nice tutorials! How about LPC1769 chip? Do I simply change default ends = LPC1769?
and copy all the BTT SKR.h files under lpc1769 folder?
Well I've yet to use a loc1769 in a video, so I would need a board. Granted I do not want to make videos overly complicated.
you won't need to copy the BTT SKR files, the latest marlin has a lpc1769 environmnent in place and will map to the correct pins based on the board you specify in configuration.h
Hey Edward i have a question if you could answer. After a short circuit of print cooling fan cable my board became unusable. q3 ligth is on and red ligth is not turning on. İs this a dead end or could it be saved. I changed the fuses by the way nothing works. Appriciate if you can help.
It's a hard question to answer. It depends on your knowledge of electronic and you ability to repair. If the cost in materials and your time are worth it try and repair. If it exceeds this then just replace board.
When ı try connect pronterface it is just say "connecting". port and baudrate is right. did you any install driver for that?
Does this board have integrated stepper motors or do you have to buy additional motors?
Also you mix the extrudes number up
Not sure I understand? The two components used with stepper on board. A stepper driver board and Nema17 stepper motors.
@@EdwardBraiman Everywhere I look they talk about adding additional stepper drivers, ie TMC2209. Are there any onboard drivers or do you have to make an additional purchace, Thanks
thank you soo much
You're welcome.
great video any chance you have a picture of how to set up the jumpers for running drv8825 stepper drivers please
There should be a link to the SKR 1.4 in description which should have a picture. If not let me know and I'll update description.
@@EdwardBraiman thanks for the quick reply I just watch your other video about the skr v1.4 with drv 8825 again great video
How about showing in VS assigning a drive letter when auto detect does not work?
hello and congratulations for the very instructive videos .... I would like to ask you one thing, I purchased an anycubic predator printer ... how can I modify the fw. for that car? ... thanks for the info ... 😊
You may have to provide a little detail. You referencing a type/brand of printer. I'm not sure what motherboard they use. My videos reference a type of mother that can go into multiple printer types. There is an example folder in Marlin that may provide a template for what you're doing.
@@Italian-design-4.0 Delta should be in examples folder of Marlin firmware.
@@EdwardBraiman thanks :-)
sorry but actually I had to write you to the video of the skr 1.4 turbo ... now I continue here
my printer
is not in the marlin 2 list unfortunately
the printer is called anycubic predator ... the card is the skr 1.4 turbo and the drivers are 2209
@@EdwardBraiman I would like to understand what parameters to put for that printer
@@Italian-design-4.0 the parameters/configuration are the same as the the other videos in the playlist with the exception of motherboard and defualt environment for the turbo settings in this video.
I want to use TMC5160 driver's on my SKR1.4 turbo board. Would the setup be similar to what you show?
Depends on if UART or SPI. I'm going to do a video in a couple of weeks.
Did you find any informations on those closed loop driver interface? BTT keeps beeing secret about it, seems interesting. Ordered myself a pair of their closed loop steppers with the control board (sensor and driver) attached to the back of the motor.
About all I know is how to connect, the wires. I'm trying to research what stepper to use in Marlin firmware, but it would be nice for BTT to publish anything.
Looks like it's a feature request 12496 on Marlin bug tracker.
Found some stuff in Marlin firmware 2.1.x in configuration advanced.h, search on external_closed_loop_controller. I'm still searching for more details.
It's also in 2.0.x
Looks like it's not ready yet.
your videos are great. Can you show in one video regarding putting TMC 2130 in spi mode and Bltouch with sensor-less homing in SKR 1.4. And please also how to attach the Bltouch. Like fitting of the bl touch.
Soon.
@@EdwardBraiman thanks man.
@@EdwardBraiman ?I understand that the error with bl touch has not been fixed yet ???
do you have a configuration for skr 1.4 and bltouch?
On my Discord channel there's a room for specifically asking questions about configuration for BLT. There are several people who can help.
Brand new to all of this. Was looking for an all in one tutorial to get my skr1.4 set up. Unfortunately I got lost in this one as soon as you said “I’m going to search for SKR” but you didn’t see how to search. I assume it’s a keyboard shortcut command. I tried shift control f like I saw someone say online but that didn’t work.
You can always read the file for boards.h like me. Let me know if you're still having issues.
It's Ctrl + f.
4:30 Although your Windows "recognises" the .CUR file as cursor file in *this* case the .CUR stands for *current* firmware on the board and has _nothing_ to do with cursor which would usually be an "icon" type for the mouse cursor appearance.
If you want some humor read the comments from my SKR 1.3 Basics when I said current.
@@EdwardBraiman I tried to find a comment about that but couldn't - however, don't let yourself be "corrected" _to the dark_ side when you were correct the first time already - otherwise you'll just get a clever-d... like myself jumping onto that _again_
Keep up the good work 👍
Hi Ed, i really could do with your help, my ex partner has unplugged some things on the board but i've not got a clue how it works, its for a co2 laser cutter, is there anyway i can send you some images please?
There's a playlist of tutorials and unfortunately I avoid showing people how to setup laser's. Most of the information with exception of laser is in playlist.
Hello Mr. @Edward Braiman
Is there a way to connect a 12 volt RGB LED to a Skr 1.4 board?
How can I set the pins for the three colors, given that the RGB LED output in this board is for the neopixel type, but I cannot get it, but I have the normal type, and I tried to search for a way to connect it on this board, but I failed to get an answer, it is related to specifying custom bins and so on and this is difficult for me ..
I can feed the stripe with 12 volts via a transistor and connect it to the board, but I hope to find a way to connect the data outputs on the SKR 1.4 ....
I hope you will help me as you helped me in the past, as you did in any case, and thank you
I'll need to research.
@@EdwardBraiman Thank U Sir ...
can i use Max end stops pins for this reason ?
Depends on how much modifying of Marlin firmware you're comfortable with.
Edward I seem to be getting this message every time I try to load Platformio: Installing PlatformIO Core...
Please do not close this window and do not open other folders until this process is completed.
Failed to install PlatformIO IDE.
any ideas?
Thanks
Checkout my new video I posted for installing VScode with Platformio and let me know if it works.
How different is it for the turbo boards will i be fine if i follow along?
Just the speed of the processor and a power bar which has almost no documentation. Yes they only difference if motherboard and processor in tutorial.
@@EdwardBraiman Did you cover the speed of the processor? I'm building a machine frame scratch and this is the hardest part.
In the second video tutorial in the playlist on SKR 1.4 turbo.
@@EdwardBraiman awesome thankyou!
You're welcome.
Hi. Could you show more about the ADD ONS modules: BTT WRITER; WIFI; DCDC. Thanks
Love too.
is this a plug and play board? Everything already installed?
Plug-in play relates to Windows operating system. The board is different, you need to manually configure Marlin firmware to operate per your needs. As for connecting to Windows 10, it should configure automatically.
Is it necessary or needed to put, say, a 2gb micro sd in there? If that's even possible?
You should limit the size of microsd card to 128gb of fat32 filing system.
@@EdwardBraiman The included SD is in fact 128MB, hah I haven't seen that size in ages. Is it going to be enough?
Do you have to use the 2.1 dev build and not the 2.0.x bugfix one?
Bugfix 2.0 has the fixes from the release. 2.1 is next year's release or in development terms the release for coming year.
@@EdwardBraiman Installing and looking at it now. Unfortunately there seems to be no configs for the printer I will build for (Ender 5 Plus with SKR v1.4/2209's)
Check the example files folder. You may need to modify configuration files to fit motherboard your working with.
I've tried multiple times to duplicate your video. When I compile I'm getting the lpc168 failed. Does the mainboard need to be connected for this to work? The only difference between your video and what I'm doing is I'm using the latest marlin build, Although I've tried with the development version as well with the same results. I've also tried to duplicate your video on the 1.3 board as well with the same results. The only thing I can think of is I don't have the main board connected. Hopefully you can be able to help. Thx.
In VScode are you clicking the check mark or the arrow? Also the default environment is LPC1768.
@@EdwardBraiman Apparent that is what it was. Thanks for the help. I am suppose to get the board/driver/stepper motors this week and so I wasn't sure if I needed the board connected or not. Do you know off hand if the 120hz 1.4 board will use the same chip set by chance?
Happy New Year to you!
@@dougw9224 unsure, but you'll know when you see it in the firmware.
Man, how'd you get it so quick? Ordered mine the day they were announced and it's still not shown up :(
Amazon.
Excellent videos. Thank you. Would you please do a video on how to setup dual Z steppers on a Turbo 1.4 using TMC2209 drivers. I've been trying to get mine working for days. The Z motors are not synchronized and they make a loud hum for a few seconds after manually moving the using the TFT35-E3 V3.0. Again, the videos you've done so far have been a great help.
Are you using one stepper or two. There maybe an active bug being addressed on Marlin. I've tried to get my TMC 2209 drivers working and I'm waiting on a possible Marlin firmware update.
@@EdwardBraiman Is this a known issue Edward? I've just finished the hardware setup of my board for my CR10s and I'm using one driver to power the dual z steppers. Would be good to know if I'm going to hit an issue ahead of time. Thanks for all your help!
I'm not sure if it's a know issue, but check on Marlin firmware bug tracker website. It doesn't work for me as well.
@@EdwardBraiman I'm using 2 TMC 2209 drivers in the Z and E0 stepper ports.
@@michaeljones3163 I'm a little confused, has anyone seen a tutorial created by me that involves a TMC 2209? When I do tutorials I make sure they work before posting. As your all having issues, myself included with my own TMC 2209, I would suggest contacting Marlin firmware bug database and asking questions as to why or how to get the stepper working.
Just tried following your steps for skr 1.4. turbo with LPC1769 and latest Marlin dev build fails to compile it. In latest marlin fw no pins defined for lpc1769 for a new turbo board.
Almost purchased a turbo, but the only difference is a couple of MHz. I'm guessing it loads fine on SKR 1.4? Maybe y you can open a bug on Marlins bug page.
same here, SKR v1.4 Turbo with LPC1769 fail to compile
Is the baud rate supposed to be 115200 for this board? There is no pin map for v1.4 turbo. Use 1728? Use V 1.4? Change board id? Missing library for 2209 drivers. VS Code won't compile because I have to update my includes. I have to do that instead of the seller? There may be some messages down there in the corner to include things, but we won't go into that now. Install a library installer with DOS commands to install the parts the seller couldn't bother with. The gd rubber duck doesn't work either. Not very happy.
Hit compile a second time. The board can do 500000.
Also this tutorial was recorded before SKR 1.4 turbo hit the market. So lpc1768, turbo lpc1769.
@@EdwardBraiman Thanks for the info and vids. This can be daunting for a mid-level user. I still need to learn how to install libraries for graphic display and tmc stepper drivers, but I got it to compile a couple times now and feel like a hero. I found that just putting the sd card in the pc and hitting upload in vs code, it finds the card automatically and installs the bin. Watching your tuto for graphic display on 1.4 turbo next.
You're welcome.
Can you confirm only one on the fans are controllable? From what I gather from the data sheet, all but one are linked to 12/24v and Gnd.
That would seem to be how they designed it. It's best to use 12v for all power.
I'll need to experiment, on if the fans are controllable, but a quick way to check is open the pins file and check if pins are assigned.
@@EdwardBraiman depends on the drivers. I tested 2130 on 12v, but they don't really work well.
@@EdwardBraiman yeah, I had a look at the pins and they look like direct to 12/24 and Gnd
@@alin116 you can always use another device to connect them to a signal pin.
I just installed the SKR 1.4 and the TMC 2209's and now my extruder motor isn't working. It locks the motor like it trying to turn. I swapped drivers and the problem stayed with e0. Do you know why this is happening?
Unsure, but I'll attempt tonight and see if I see the same thing. Who makes the steppers?
BigTreeTech TMC2209
Checkout my tutorial on SKR 1.3 for tmc2208 UART, the steps should be similar and ignore the previous comments.
We can connect mks tft35 in this board?
I'd have to check, because it doesn't have a TFT connection.
On work
NOTE: If you have a 1.4 turbo. you need lpc1769
Probably yes, but I'm not seeing pins file in Marlin firmware update yet.
@@EdwardBraiman indeed. But it Worked. Maybe 1.4 and 1.4 turbo are the same. Only 20mhz faster
They appear to be identical with exception t the processor and that might be easy to figure out by comparing similar pins files in Marlin. Keep in mind that there is an existing open bug in Marlins bug repository. It might save you time reinventing the wheel.
There is no X Y and Z MAX endstop pins on this board, the MAX pins you reffered to aint endstop pins, they are diag pins for filament runout, power diag etc.
Are you sure they cannot be made max pins? The pins can be modified to be anything as long as you understand how to modify the boards pins file. So yes, they can be x,y,z max endstops or runout detector.
@@EdwardBraiman well you can use two of them I think, but the one next to Z-min dont have any resistors connected to it, its for power detection.
Can I add a relay to this board?
I'm guessing yes.
Good evening, Why do ,not make, videos on SKR PRO v1.1 there is a problem with this motherboard ?more videos thanks
I've been working on it slowly. It's a very complicated tutorial board and I only have a two week vacation to get as much content created to buy me more time to focus on.
@@EdwardBraiman thank you sir, Good christmas eve"
I'm getting 9 or 10 errors every time I compile, on lines that I have made no mods whatsoever. What's going on? #error "TMC2208 or TMC2209 on X requires X_HARDWARE_SERIAL or X_SERIAL_(RX|TX)_PIN."
That maybe linked to a sanity check on other changes that occured.
@@EdwardBraiman As it turned out, I was trying to adapt firmware a kind soul had posted to Thingiverse and which was, by dint of successive Marlin upgrades, hopelessly out of date by the time I got hold of it. He was also using turbo, and the 1769 environment was activated in platform.ini, so nothing I had done was jiving with that. Once I got that corrected and updated to the latest bugfix, everything literally dropped into place and I was off and running.
@@EdwardBraiman On another topic, have you weighed in on the various Ender Xtender upgrades?
PlatformIO IDE doesn't show up on the search at all!!! How can I load the firmware without microsoft crapware!!!
Should be on Microsoft webpage.
if that's z max why does it say pwr det? what's det? Also x and y have e0 det and e1 det
It may say now, but either I missed detail or they updated documention.
In Teaching Tech's video he copies files from config/examples/ to the Marlin folder. I notice you don't do that (and when I try that way it doesn't compile). Can someone explain to a total newbie how/if you define the printer model/size/settings??
Well examples files is a good method to use in Marlin firmware versions 1.1.9 and below. For Marlin firmware version 2.0.x, they may not be updated due to recent release. The reason I do not use them is mostly to show the logic of the steps in my tutorial.
Most printers have a defaulted size in the firmware configuration.h.
@@EdwardBraiman thanks! So you are saying it is best to manually go through the configuration.h and set your perimeters? Should I download stock firmware and compare the configuration.h files to help get it correct? (Or is there a better method)
Yup. At least you'll understand all the pieces.
@@EdwardBraiman eventually!! LOL thanks again for the videos
when I try to open marlin I do not have the platformio.ini file that is needed to open in it how do i find that file?
Which version of Marlin firmware did you download? Are you using VScode and platformio IDE plug-in?
@@EdwardBraiman I accidentally downloaded only the configs file i fixed it and downloaded the 2.0.3 version
now platform io is not loading on vs code even after restart
Try reinstall.
@@EdwardBraiman i did and it is working now how do you search in platform io? also these videos are great thanks for the detailed content any ideal if you be doing tutorials on 2209 2130 driver installs?
I lost the original file that came on the sd card do I need it?
Nope, but it's probably on BTT website.
@@EdwardBraiman will this video show me how to get this working with an ender 3pro?l also have tft35 im trying to get going at the same time ive managed to update the screen this boards being a pita
There is a series of videos in playlist for SKR 1.4.
@@EdwardBraiman i follow teaching techs guide to a tee and all i get even with mynold screen and all i get is a blank screen,no touch screen side either.Only thing i can gat to work is my 4.2.2 board with ith new screen but no touch screen side.If i still had hair id be tearing it out
@@EdwardBraiman last question is there a default bin file i could just load onto an sd card for ender 3 pro or would i have more luck with an SKR Mini E3 thanks for all your help
Pronterface is sending back...
Reporting endstop status
x_max: TRIGGERED
y_max: TRIGGERED
z_min: TRIGGERED.
Is this telling me that it was not updated?
When I try to switch to marlin on my TFT35 V3 I get a black screen. Anyone have any ideas on these problems? I am assuming it is because the TFT35 V3 is not finding marlin.
They sound like two separate issues. First are any Endstops connected to board? Second did your TFT illuminate before?
What's the position of the 5v jumper for USB?
@@EdwardBraiman No end-stops are connected. I am not sure if it illuminated b4. I took the sd card out and used pronterface and ran m115 and it comes back as bugfix 2.0.X and that is what I used. So it did install. But I am still not sure why x,y, and z are all coming back as triggered.
@@EdwardBraiman It is set to USB. On a side note I have a brand new MKS gen l with tft32 and 5pcs A4988 It is brand new. I bought the skr 1.4 instead. I want $35 if you know anyone interested. I paid $64 for it. www.banggood.com/TFT32-Full-Color-LCD-Touch-Screen-MKS-GEN-L-Mainboard-with-5Pcs-Red-A4988-Driver-for-3D-Printer-p-1341254.html?rmmds=myorder&cur_warehouse=CN
Very good, but you don't need the way over the SD Card Adapter. It works over USB. Please make more videos with the Skr Board - with Dual Extruder.
Correct, the reason I started out this way was to show recovery. I'm working my way through about 30 requests, but there is a dual extruder in SKR 1.3 that might help.
What no Servos??
There's one servo port, but you can add more with pins file modification. There should be a video in the playlist.
@@EdwardBraiman OK, Thanks I'll look for it
how the heck are you getting the search bar you are showing me that searches the file ? my search searches EVERYTHING and does not give me your results AT ALL
Do you have platformio extension installed?
I watched your video 5 times today , I followed you step by step I put the sd card in downloaded Visual Studio Code downloaded Marlin firmware , press open project and Marlin firmware won’t work .I’m getting very frustrated I have spent a lot of money to upgrade my printers and I can’t even get to the reprogramming part of it . Please help me I need the control board for my Tevo Nereus because I changed to better stepper drives and the motherboard stopped working . Getting tired of 3D printing real quick. Thank you
First is the Firmware loading or is the build/compile failing? Second what the hardware you're using? Meaning SKR 1.4, type of stepper drivers, ECT. What's the current firmware version your using?
Edward Braiman
I bought the same board you did before watching your video . I have TMC 2208 stepper motor drive and getting TMC 2130 from Amazon. As for the Marlin firmware I download it then unzip it then go to the VSCode so I can read the firmware but it doesn’t highlight like it did on your video.
By the way great videos just hope I can get the printer to work again.
Okay first download the Marlin firmware version 2.0.x. unzip and open in VScode. Make no changes to firmware and click check mark at bottom. This will help and see if default configuration will build. If it does build make the changes in the video and then click the check mark again. If an error occurs check to see if you have Git installed. Let me know what you see.
Do you have platformio IDE loaded?
I got a fail on the LPC1769 build :/
For SKR 1.4 you need to specify lpc1768 for SKR 1.4 turbo you need to specify lpc 1769.
@@EdwardBraiman Yes, I'm aware and I did specify LPC1769, must have missed something else.
For me it showing
Unable to find destination disk
Can you manual copy to micro SD card?
never mind.
followed the instructions with the 1.4 turbo and i get a bunch of errors
The SKR 1.4 is a different configuration. You're going to find the board type for turbo and the default environment in platformio.ini it may be lcp1769.
@@EdwardBraiman i even used the board and drivers i have and it still gets a bunch of errors
Download a fresh copy of the firmware unzip and open in VScode. Compile without changes with check mark. Does it compile or build with default configuration?
@@EdwardBraiman what version ive tried 2.0 2.0 and 2.1 bugfix
2.0, the point is to check if the Marlin firmware in default mode builds on your system.
Who is zed? I thought Zed's dead.
Zed is the British to pronounce Z. If I pronounce it in American english people get confused.
Damn, and I just upgraded twice. :(
Oh, and it looks like it jumped up in price by 3 dollars to $25 bucks too.
Yeah, but I'm working on a second tutorial more to your liking. This one came in the mail today and I was excited by what I saw.
Pretty cool and I do like all of those fan options but now that I have two V1.3 I have no need of a V1.4 unless these decide to burn up on me as well. :/
Hi Edward, I'm on the final steps of my CR10s SKR 1.4 upgrade and running into a few issues. Would appreciate any thoughts. Here's the details.
Marlin 2.0.x Dev Build - Configuration.h pastebin.com/inc5555t
Main Problems
1) No Printer Attached! Message on TFT35 E3 LCD Screen and therefore unable to control. I set the LCD to REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER but not sure if I should be using TFT?
2) Grinding noise from motors when moving the Z axis Up using Pronterface. See video at th-cam.com/video/-XlFhO2T6Cs/w-d-xo.html
Hardware details
CR10S
SKR 1.4
4 x 2209 Stepper Drivers (Dual Z Motors driven from one driver)
TFT35 E3 LCD Board (Currently connected to control board with both EXP1 & EXP2 Cables)
Update. I managed to get the screen working. I didn't realize I needed the included black wire and had only connectd the two exp cables. I am wondering will I still be able to connect to the printer via Octoprint on a raspberry pi or is that an either / or situation? The second grinding noise is still an issue FWIW if anyone has ideas.
You should be to use both raspberry pi and LCD. The TFT only need the one cable. The ribbon cable is yes for RepRap discount full graphics smart controller emulation on LCD if you're not using TFT mode. The current on the stepper maybe the issue.
Edward Braiman Great, That’s helpful. What would you recommend for the current? I spliced the wires of the two z step motors to a single driver.
Here's my current configuration.adv.h pastebin.com/gqPKcHxJ and another stupid question. What is TFT mode?