Very clear and quick video! And the specific problem of using EdgeRouter with Unifi-equipment is probably most prominent. However: I was not able to set the VID to Switch0 switch-directed port. "Error: platform does not support this setting in switch0 Value validation failed." (EdgeRouter PoE 5)
Make sure your Unifi switch port doesn’t have ‘Traffic Restriction’ enabled - that broke everything for me until I found the setting. Video was very helpful, thank you.
@@MactelecomNetworks yes great video instruction, Cody if you have IP camera systems on a separate vlans how would you route access for a program to access an the IP cameras stream would you route the rtsp stream between the vlans
Great and to the point video, Do you have examples where the ER-X is dual WAN where one is local ISP the other remote (eg DHCP Relay) where I can have SSID's configured for each ? The idea being the AP's locally are actually managed by a remote UDM.
Sorry to be an idiot, but are you taking one cable from the edgerouter X from eth1 tagged with the two vlans 10, 20 and wiring that to your switch. And do you have to tell the switch that it is receiving vlans 10, 20 on one of the ports? Or does it just sort itself out?
I would like to go from my Eero system to a complete Uni system. Is there some way I can get in touch with you to make sure I get all the right components?
Great videos. Can you please provide lesson on how to setup firewall rule to rate limit an IP at certain time on edge router x? Trying to do this on my kids pc so that they can’t stream video or play games while doing their homework or on remote school lessons. Thanks.
Love the video. I was curious if you know how to do inter vlan routing for the firewall. That’s the part I’m having trouble with. I want One vlan to see everything and the other only Internet.
I know this is a big request but I would appreciate a video on setting up a network with a USG and a Unifi switch and specifically configuring multiple segregated VLANs. And then give some "Allow" examples across the VLANs. Like allowing a Roku device etc. I've done this on Edgerouter but am moving to a USG for simplicity. Thanks and appreciate your thorough videos
sorry to be so offtopic but does any of you know of a method to log back into an Instagram account?? I somehow forgot the account password. I would love any tips you can offer me!
@Vincent Ari thanks so much for your reply. I got to the site through google and I'm waiting for the hacking stuff atm. I see it takes a while so I will reply here later when my account password hopefully is recovered.
So, are the native LAN and both VLANs on port 1 of the ER-X, so all 3 networks are going to port 2 of the switch? Or, is it ONLY the VLANs are on port 1 of the ER-X, hence port 2 of the switch? I want to properly setup a guest network at my house. Need a VLAN for that, but I also need to be able to access my wired network with my wireless devices.
I need VLAN to talk over IPsec VPN as phase 3, phase 2 LAN and it's works fine. connected. Anu hints please ) Or maybe setup it as second lan and assign it to port?
Hi I have a question. What if I want to create a vlan for wireless and hard wire on one of the ports for local connectivity only no internet access how would I do that? I do have ERX, mini flex switch, 2 unifi WAP.
Hello, I only have a Edge Router X and a AP AC lite. Internet comes in on eth0 and the AP AC lite is plugged into eth4. All devices connect to the network via the AP AC lite. Is it possible to have two VLANs set up with this hardware configuration? I tried creating two VLANs and seem to have done something wrong, resulting to needing to do hardware reset the router to set it up again as I could no longer connect to it via the Web UI via laptop plugged in to eth0.
Hi Cody. I currently have a UDM PRO facing the internet. I would really to sure up my security by placing an Edge Router or Pfsense Firewall on the edge in front of the UDM Pro. I currently have all Unifi equipment which I believe is my single point falure. What would be your recommendation?
Hi there. first of all great video. I still have an edge router x lying around here. the only thing that keeps me from it is that I have read that the usg of ubiquiti goes down to 85mbit / s if you activate everything on the firewall. the edge router x is comparable in terms of hardware. I have a 500/50 line and don't want to give away performance. What do you think?
Can this configuration still works if the switch and AP are on different subnet? For example, switch is on 192.168.1.x and AP is on 192.168.20.x and both physically connected to Edge Router X?
can i make port 2 untagged port of vlan id 5 and port 3 untagged vlan id 6, for example? i want to make 2 PCs different Vlans but able to ping each other.
I am looking for a solution to setup a IPv6 VLAN within my router which has IPv4 from my ISP. Is it possible to setup a IPv6 Network while my ISP only gives the router and so my devices a IPv4 adres?
What is switch0 on Edge router? Is that a physical interface where u r creating L3 interface for vlan 10 and 20? I am confused. The way I do on most enterprise router is by directly creating vlan interface under physical ports. The way u did on edge router is by creating vlan interface on switch0 and then making switch0 to be vlan aware.
Me think the more ports is could be handy to have internal switch functionality for convenience. I have the ER-12 my switch0 has max 8 ports of the 12 where Dual WAN take 2 of the 8.
Well I check it out , easy to find on the Ubiquiti site. Some type of ER have Switch chip to connect some port. Because without it switching is software task en can be slower. That is bridging. While Switch chip accelerates the switch task. Guidline is that without switch chip it advised to attach a switch to it. instead of bridging. The ER with switch Chip you can use a few port in the same LAN without performance hit.
No matter how many videos I watch or hundreds of hours I spend trying to get this to work on my Edgemax 16 XG switch and pfSense router, it NEVER WORKS. No VLAN tagged device *EVER* gets an IP device from the DHCP server I specifically setup on pfSense. I've spent YEARS trying to do this. I would love to pay someone to try their own instructions on my network and see if they can get it to work. FYI: I have 40+ years experience with computers. I work at a Fortune 100 company in the IT department and have dozens of network certifications. Everything works in a professional environment, but not in my home setup. I'm completely baffled.
It couldn't be any more straightforward. Great information.
Great Breakdown of all the steps for configuring VLANs. Thanks
Very clear and quick video! And the specific problem of using EdgeRouter with Unifi-equipment is probably most prominent.
However: I was not able to set the VID to Switch0 switch-directed port. "Error: platform does not support this setting in switch0 Value validation failed."
(EdgeRouter PoE 5)
Make sure your Unifi switch port doesn’t have ‘Traffic Restriction’ enabled - that broke everything for me until I found the setting. Video was very helpful, thank you.
You do a fantastic job of explaining operation and configurations.
Thanks Dennis
@@MactelecomNetworks yes great video instruction, Cody if you have IP camera systems on a separate vlans how would you route access for a program to access an the IP cameras stream would you route the rtsp stream between the vlans
Thanks!
No problem thanks for the support :)
this is exactly what I need, very clear and straightforward. Thank you so much
Thank you! I had such a hard time finding the PVID in this UI...
Thank you, VERY MUCH.
This was JUST what I needed at the precise moment of time.
Great and to the point video, Do you have examples where the ER-X is dual WAN where one is local ISP the other remote (eg DHCP Relay) where I can have SSID's configured for each ? The idea being the AP's locally are actually managed by a remote UDM.
Excellent video, informative but still a quick tutorial. Thank you very much!
Just what I was looking for. Thanks!
Sorry to be an idiot, but are you taking one cable from the edgerouter X from eth1 tagged with the two vlans 10, 20 and wiring that to your switch. And do you have to tell the switch that it is receiving vlans 10, 20 on one of the ports? Or does it just sort itself out?
I would like to go from my Eero system to a complete Uni system. Is there some way I can get in touch with you to make sure I get all the right components?
Great videos. Can you please provide lesson on how to setup firewall rule to rate limit an IP at certain time on edge router x? Trying to do this on my kids pc so that they can’t stream video or play games while doing their homework or on remote school lessons. Thanks.
Hey. let me look into that. I am going to be working on more edge router x videos. The next one will be firewall.
Love the video. I was curious if you know how to do inter vlan routing for the firewall. That’s the part I’m having trouble with. I want One vlan to see everything and the other only Internet.
Hey that will be apart of my next video on edge router series. You need to create firewall rules for that
@@MactelecomNetworks any idea when you’re going to post that? I’m really struggling with the firewall rules for this specifically
@@Blue89bird2 not 100% sure I have a bunch of things lined up I may be able to squeeze it in this week or beginning or next
That would be awesome. Thank you sir
can this setup be applied without a swith? AP directly into ERX with the port setup part of the switch?
I know this is a big request but I would appreciate a video on setting up a network with a USG and a Unifi switch and specifically configuring multiple segregated VLANs. And then give some "Allow" examples across the VLANs. Like allowing a Roku device etc. I've done this on Edgerouter but am moving to a USG for simplicity. Thanks and appreciate your thorough videos
sorry to be so offtopic but does any of you know of a method to log back into an Instagram account??
I somehow forgot the account password. I would love any tips you can offer me!
@Rex Clark instablaster =)
@Vincent Ari thanks so much for your reply. I got to the site through google and I'm waiting for the hacking stuff atm.
I see it takes a while so I will reply here later when my account password hopefully is recovered.
@Vincent Ari it did the trick and I actually got access to my account again. I am so happy:D
Thanks so much, you saved my account !
@Rex Clark Glad I could help :D
So, are the native LAN and both VLANs on port 1 of the ER-X, so all 3 networks are going to port 2 of the switch? Or, is it ONLY the VLANs are on port 1 of the ER-X, hence port 2 of the switch? I want to properly setup a guest network at my house. Need a VLAN for that, but I also need to be able to access my wired network with my wireless devices.
Perfect! Good job
excellent, it's just what i needed
I need VLAN to talk over IPsec VPN as phase 3, phase 2 LAN and it's works fine. connected. Anu hints please ) Or maybe setup it as second lan and assign it to port?
Can I configure vlans for the wifi networks if I have only the edge router and unifi ap plugged on an unmanaged switch?
Hi I have a question. What if I want to create a vlan for wireless and hard wire on one of the ports for local connectivity only no internet access how would I do that? I do have ERX, mini flex switch, 2 unifi WAP.
Is it possible/convenient to have VLANs on your EdgeRouter and trunk ports distributed on an Edgeswitch inside a OSPF network?
Can i do this when I use 2 wan+failover??
Hi , thanks for your helpful video. If I want to allocate three ports for two vlans how could I do it
hi, what kind of ubiquiti network do you use? from where I can download?
Hello, I only have a Edge Router X and a AP AC lite. Internet comes in on eth0 and the AP AC lite is plugged into eth4. All devices connect to the network via the AP AC lite. Is it possible to have two VLANs set up with this hardware configuration? I tried creating two VLANs and seem to have done something wrong, resulting to needing to do hardware reset the router to set it up again as I could no longer connect to it via the Web UI via laptop plugged in to eth0.
A quick question, why doesn't my edgerouter 6p have the swtich0 interface ? Is there some config behind this or am I missing something
Will it work with EdgeRouter and TL-SG108PE?
Hi Cody. I currently have a UDM PRO facing the internet. I would really to sure up my security by placing an Edge Router or Pfsense Firewall on the edge in front of the UDM Pro. I currently have all Unifi equipment which I believe is my single point falure. What would be your recommendation?
Hey well the UDM pro is a firewall. You can set it up that it drops all WAN traffic incoming which is usually done by default on the other plateforms
@@MactelecomNetworks Thanks. I'll look at some of your firewall rules videos to get a better understanding on this particular rule.
Hi Cody just a quick question will this be the same way if I want one of the network ports from the edgerouter x and a WiFi network on the same vlan
Hey John,
You can tag the physical port itself with the vlan you want it to be associated to
Hi there. first of all great video. I still have an edge router x lying around here. the only thing that keeps me from it is that I have read that the usg of ubiquiti goes down to 85mbit / s if you activate everything on the firewall. the edge router x is comparable in terms of hardware. I have a 500/50 line and don't want to give away performance. What do you think?
Hey. You should get around 500/50 from the edge router x . For the USG it drops to 85mbps if you have threat management turned on
Can this configuration still works if the switch and AP are on different subnet? For example, switch is on 192.168.1.x and AP is on 192.168.20.x and both physically connected to Edge Router X?
can i make port 2 untagged port of vlan id 5 and port 3 untagged vlan id 6, for example? i want to make 2 PCs different Vlans but able to ping each other.
I am looking for a solution to setup a IPv6 VLAN within my router which has IPv4 from my ISP.
Is it possible to setup a IPv6 Network while my ISP only gives the router and so my devices a IPv4 adres?
What is switch0 on Edge router? Is that a physical interface where u r creating L3 interface for vlan 10 and 20? I am confused. The way I do on most enterprise router is by directly creating vlan interface under physical ports. The way u did on edge router is by creating vlan interface on switch0 and then making switch0 to be vlan aware.
Switch 0 is shared through eth1-3 I believe.
Me think the more ports is could be handy to have internal switch functionality for convenience.
I have the ER-12 my switch0 has max 8 ports of the 12 where Dual WAN take 2 of the 8.
Well I check it out , easy to find on the Ubiquiti site. Some type of ER have Switch chip to connect some port. Because without it switching is software task en can be slower. That is bridging. While Switch chip accelerates the switch task.
Guidline is that without switch chip it advised to attach a switch to it. instead of bridging. The ER with switch Chip you can use a few port in the same LAN without performance hit.
thank you so much
I followed these instructions but i can't get internet access on my wireless networks that i assigned to my vlans. Please help.
Me neither, have you managed to solve this issue?
спасибо чел
No matter how many videos I watch or hundreds of hours I spend trying to get this to work on my Edgemax 16 XG switch and pfSense router, it NEVER WORKS. No VLAN tagged device *EVER* gets an IP device from the DHCP server I specifically setup on pfSense. I've spent YEARS trying to do this. I would love to pay someone to try their own instructions on my network and see if they can get it to work.
FYI: I have 40+ years experience with computers. I work at a Fortune 100 company in the IT department and have dozens of network certifications. Everything works in a professional environment, but not in my home setup. I'm completely baffled.
Error: can not have an address configured on switch-port
Show