I’m curious about some of the settings you have on map6. From your later videos I realize you’re running map2 on the car with some duty bias adjustments. Does setting boost to 0 on map6 have anything to do with that? From what I understand, map2 has its own preset settings separate from map6. Just curiosity. I also own a 550i. Props on making videos btw. Definitely subscribed
Great video! Thank you. I have a question; there are (4) sensors on this motor. (2) on the intercoolers and (2) on the intake manifolds. did you not have to change the (2) sensors on the intake manifolds? I also have a tune from Mission, but have upgraded the turbo's to Pure Stage 1's so I'm thinking I need to upgrade all (4) sensors.
@@splittswood thank you for the reply. It's Mission Performance and they're telling me whenever they upgrade turbo's they replace all (4) sensors. They upgraded my tune to Stage 2 for the 3.5 MAP's and so far I got the ones on the intercoolers replaced, but can't get to the ones on the side of the manifolds. They are a PITA. tempted to just load the tune and see if it works ok as is, based on what you're telling me. ??
@@JimiJoey Yes I did all MAP sensors Tuner (Mission Performance) told me that if I didn't do all 4, the ECU will still only max out at 21psi boost. I used a long extension and a swivel headed torx for the ones on the side (intake manifold) and worked from the top of the motor down the side. Took me about 5 hrs to do this job but I got them done!
Hey man love ur informative videos I had a question about the tmap sensors do I need to change them if I run a different stage 2 tune not using the jb4 at all I got the n63tu motor was thinking of going with bootmod3
can you please send the link from where you got the tmap sensors from please. I have an N63TU as well and would like to install a jb4 bcm with the tmap sensors. Thanks
Amazing video man thank you no body have your videos I got cold air Headers and jb4 now
Good stuff, props to the camera operator too!
Just did mine thank you so much for this but man mine was hard to push in lol
I’m curious about some of the settings you have on map6. From your later videos I realize you’re running map2 on the car with some duty bias adjustments. Does setting boost to 0 on map6 have anything to do with that? From what I understand, map2 has its own preset settings separate from map6. Just curiosity. I also own a 550i. Props on making videos btw. Definitely subscribed
Clean fammmm 💪🏼
Great video! Thank you. I have a question; there are (4) sensors on this motor. (2) on the intercoolers and (2) on the intake manifolds. did you not have to change the (2) sensors on the intake manifolds? I also have a tune from Mission, but have upgraded the turbo's to Pure Stage 1's so I'm thinking I need to upgrade all (4) sensors.
No just the Tmap in the inter oilers.
Sorry intercoolers.
@@splittswood thank you for the reply. It's Mission Performance and they're telling me whenever they upgrade turbo's they replace all (4) sensors. They upgraded my tune to Stage 2 for the 3.5 MAP's and so far I got the ones on the intercoolers replaced, but can't get to the ones on the side of the manifolds. They are a PITA. tempted to just load the tune and see if it works ok as is, based on what you're telling me. ??
@@yodamel02Did you got all four of them swapped?
@@JimiJoey Yes I did all MAP sensors Tuner (Mission Performance) told me that if I didn't do all 4, the ECU will still only max out at 21psi boost. I used a long extension and a swivel headed torx for the ones on the side (intake manifold) and worked from the top of the motor down the side. Took me about 5 hrs to do this job but I got them done!
hi, where did you get the sensors from?
do u have back end flash or only jb4 and bcm ? whats boost u are running ?
Where did you buy the sensor from ? Can you send us a link ?
You didn’t connect Maf sensors?
Are you going to do a Video on JB4 Tuning on a 2018 BMW M550i N63R G30?
What does the bias setting do
Where did you get the upgraded t map sensors from?
Hey i have the same car as you and would like to do what you have done with the tmap sensors
Hi just want to know where you purchase the 3.5 TMAP sensor?
Prob fcpeuro or ecstuning
What year is your 550i? Curious if the stock sensor is type a or b.
Yes i have the same question
Hey man love ur informative videos I had a question about the tmap sensors do I need to change them if I run a different stage 2 tune not using the jb4 at all I got the n63tu motor was thinking of going with bootmod3
It depends on how much boost your gonna run, not what tune you get.
So will this make your car faster running bm3 stage 1 tune thanks
Where did you get that intake set up? Got a video for them as well?
Do you need to install an intercooler with stage 1
Hey will the Tmap 3.5 work on a N63 with a tune also and where can I pick up a set of 3.5 Tmaps
Hey bro I change but I don’t have the Bluetooth on my jb4 it’s fine o I need do something ??
I have a2011 550i n63 jb4 type A connection, should I get the adapter for the sensors? It’s 129$ for the kit from BMS.
Do you really actually need the sensors? Can't imagine the n63tu running more than 42psi. How much boost is it running?
What intakes are you running?
How has the car been running with new map sensors
Car runs perfect, no difference except can run higher boost.
can you please send the link from where you got the tmap sensors from please. I have an N63TU as well and would like to install a jb4 bcm with the tmap sensors. Thanks
I have an N63. Where do I get the 3.5 sensors ? Do I need an adaptor?
Did you ever end up getting the tmap sensors and if so where from?
for Jb4 what harness type is require for your model ?
It’s the n63tu beta v.2.
can you put the link where you got the TMAP sensor
Burguermotorsport.com
Hey bro where do you get these sensors?
Burguermotorsport
Price?
Are you going to go catless downpipes & upgrade the exhaust system?
$170 for both, but well worth it. Major gains running 25psi of boost.
Downpipes are next, I have them, just need to install. I’ll push out a 2 part video, part 1 ceramic coating, part 2 installation.
splittlive trust me I’m on the look out for that video! I bought downpipes from armmotorsports and haven’t installed them yet 🤦🏽♂️
@@splittswood what duty bias settings do you have
Before you put it all back together, test it
Whats.your.whole
Mod.set.up.cost.includi g.red.intakes
And.what.will.this
Install.do.4.my.2011.55.o.i.xdrive
👌 glue.trick.