If you guys did an E30 setup you'd really corner the market. There isn't really anything that good on the market for them. I know it's a really old school setup but the current aftermarket all seem kind of hokie.
Josiah. I drive the blue e30 from klutch kickers. If you re design the rear of an e30 you will change the game son. It will just require some serious thinkin. But there’s tons of room for improvement and nobody does shit
Not much you can improve on a semi trailing arm besides the mounts usually moving the inner one will correct a ton on the e30 as well as balancing anti squat if you aren’t complying to fd rules and can change the subframe height to adjust the anti squat Can’t imagine a 3 link irs set up being worth the money for the e30 crowd but that’s what would be needed to make any real change or a solid axle similar to Chelsea’s fox body imo
There is a rallye kit from Finland which converts it to the traditional e36 setup I and another one which converts it to double wishbone. However, there is nothing wrong with the stock setup if you modify it slightly. Changing the angles at which the arm attaches to the subframe will make it have less camber and toe gain. The loss of toe gain isn’t very good but a normal e36/46 doesn’t have a lot of that anyway, and there is a happy medium to be found here. Just change it so all the attachment points of the control arms are more in line instead of the v it is mounted in (from top view) it’s all about the axis where the arm pivots around which makes the toe and camber gain
There is a rallye kit from Finland which converts it to the traditional e36 setup I and another one which converts it to double wishbone. However, there is nothing wrong with the stock setup if you modify it slightly. Changing the angles at which the arm attaches to the subframe will make it have less camber and toe gain. The loss of toe gain isn’t very good but a normal e36/46 doesn’t have a lot of that anyway, and there is a happy medium to be found here. Just change it so all the attachment points of the control arms are more in line instead of the v it is mounted in (from top view) it’s all about the axis where the arm pivots around which makes the toe and camber gain
Are you going to be able to make this modular with an E36? Seems like you could with just different subframe and chassis mounts. Would like to also like to understand why not have an option to keep a divorced shock and spring setup. I assume it’s not used as much at a professional level.
There’s certain points of the chassis and subframes that can not be modified as to fit within FD regulations. That what they design their parts around.
Those quick release pins you originally used... Do they thread into factory bolt holes or are they welded in? I'm trying to find a quick release system for my bike and they look like they would work for what I need
don't hold your breath, I emailed them about doing rear upper arms for my colt that i've done an full evo suspension swap, i'd send the arms to them etc, but they won't do it.
![[UNCUT] บอสพอล แผลงฤทธิ์ บอสพระ-นักร้อง ก. โดนแฉยับ! I คนดังนั่งเคลียร์ I 21 ต.ค. 67](http://i.ytimg.com/vi/XKf6HeftoPI/mqdefault.jpg)
Oh yeah. Here we go!
If you guys did an E30 setup you'd really corner the market. There isn't really anything that good on the market for them. I know it's a really old school setup but the current aftermarket all seem kind of hokie.
Josiah. I drive the blue e30 from klutch kickers. If you re design the rear of an e30 you will change the game son. It will just require some serious thinkin. But there’s tons of room for improvement and nobody does shit
Not much you can improve on a semi trailing arm besides the mounts usually moving the inner one will correct a ton on the e30 as well as balancing anti squat if you aren’t complying to fd rules and can change the subframe height to adjust the anti squat
Can’t imagine a 3 link irs set up being worth the money for the e30 crowd but that’s what would be needed to make any real change or a solid axle similar to Chelsea’s fox body imo
There is a rallye kit from Finland which converts it to the traditional e36 setup I and another one which converts it to double wishbone. However, there is nothing wrong with the stock setup if you modify it slightly. Changing the angles at which the arm attaches to the subframe will make it have less camber and toe gain. The loss of toe gain isn’t very good but a normal e36/46 doesn’t have a lot of that anyway, and there is a happy medium to be found here. Just change it so all the attachment points of the control arms are more in line instead of the v it is mounted in (from top view) it’s all about the axis where the arm pivots around which makes the toe and camber gain
There is a rallye kit from Finland which converts it to the traditional e36 setup I and another one which converts it to double wishbone. However, there is nothing wrong with the stock setup if you modify it slightly. Changing the angles at which the arm attaches to the subframe will make it have less camber and toe gain. The loss of toe gain isn’t very good but a normal e36/46 doesn’t have a lot of that anyway, and there is a happy medium to be found here. Just change it so all the attachment points of the control arms are more in line instead of the v it is mounted in (from top view) it’s all about the axis where the arm pivots around which makes the toe and camber gain
Sick sick now do e9x e82 next 👀 and full knuckle e9x front with 350x bearings and brakes 👀👀
3 for 3 upside down openings
Great Work! so interesting how it designed and all come together!
Dang. This is gunna be sick! I’ll have to check it out when it’s available
Are you going to be able to make this modular with an E36? Seems like you could with just different subframe and chassis mounts. Would like to also like to understand why not have an option to keep a divorced shock and spring setup. I assume it’s not used as much at a professional level.
There’s certain points of the chassis and subframes that can not be modified as to fit within FD regulations. That what they design their parts around.
This is sick.
I can not wait!!!! so excides for the future!
YESSSSSS!!!!! LETTTSSS GOOOO!!!!
Stunning.
Absolutely amazing !
Hopefully I have the funds to buy the products for my e46 when they come out, looks awesome.
Now we are talking! 😁
Those quick release pins you originally used... Do they thread into factory bolt holes or are they welded in? I'm trying to find a quick release system for my bike and they look like they would work for what I need
What is that kinematic design program you're using to test suspension geometry as you adjust it?
Work your magic on the E30 rear, PLEASE!
Video starts @7:10 if anybody wants to skip the 7 minute ad.
Thanks. You are 1000% correct
Better put a 370z bearing option on that knuckle also!!
Technologyyyyyy
curious if this would work with the oem upper arm
Just by looking at it, I highly doubt it
I’m waiting for you to do the evo 8/9
don't hold your breath, I emailed them about doing rear upper arms for my colt that i've done an full evo suspension swap, i'd send the arms to them etc, but they won't do it.
Why would bmw design a suspension that toe's out under compresion? Is it just lack of skill or are there any benefits to it?
Man I wanna learn how to do this but I can tell we’re looking at thousands of hours of software experience to cumulate to this