USALS Satellite Dish Motor Setup (Universal Satellites Automatic Location System)
ฝัง
- เผยแพร่เมื่อ 2 ส.ค. 2024
- #FTA #FreeToAir #SatelliteTV
THE HAPPY SATELLITE NERD EPISODE 99 The USALS Part - Watch the full Video • Satellite Dish Motor -...
In this video I set up a MOTECK SG-2100 SATELLITE DISH MOTOR FTA HH SG2100 ROTOR! HH motor on Ebay $199.00 ebay.us/loNWj6
Using USALS (Universal Satellites Automatic Location System) to perfectly align all of the Satellites in the Geostationary ark of the Satellites, to receive the #FreeSatelliteTV Channels.
You can get one of these and a dish system at / shop
www.FreeSatelliteTV.Net
#tech #FTA #FreeToAirSatellite
With the SG2100 motorized system the dish moves from east to west to track the satellites positioned along the Clarke belt. Good for any offset dish with a U-bolt or Pole mounting up to 120 cm satellite dish.
Works with all DiSEqC 1.2, 1.3, Goto X compliant receivers. It utilizes a data stream passed up the LNB coaxial lead to the mount. Only one coaxial cable is needed for installation.
/ 3167984379953238
FEATURES:
Fits all popular dish with 42mm tube
Special Design for any Receiver with DiSEqC 1.2
Only One Coaxial Cable Control
Go To X Function
High Efficiency
Compact Structure
Ultra Low Noise
Adjustable Hardware Limits
Easy Installation with LED Indicator
Manual EAST / WEST button
For Dish up to 1.2M
Three important parameters are required to correctly align a motorized c band (TVRO) dish for viewing the entire satellite arc or Clarke Belt.
1. Azimuth Angle (True South/Not Magnetic South);
2. Elevation Angle;
3. Declination Angle;
Use a compass to point your dish south and use the chart below to find your "modified" polar mount elevation and declination angle.
Once you start locking satellite transponders, fine tune your azimuth, elevation and declination angles until you peak all satellite signals. Lock down your dish.
www.tvrosat.com/resources.html
www.DishPointer.com/
To find Channels and Transponder frequencys SatHint.com/ and www.LyngSat.com/
-----------------------------------------------------------------------------------------------------------------
Go to the Dish Alignment table in your manual or on www.tvrosat.com/resources.html
Enter your Latatude and Elivation on the Motor. Mine was Lattude 44 and my Elivation was 46
For my Deinclination Angle on the DISH I subtracted the Declination Angle
(Degrees) 6.07° from the Elevation Angle (Degrees)44.66°
44.66° - 6.07° = 37.96 (37.96 Deinclination angle on the dish)
Use a compas to find your true south location.
So go to www.DishPointer.com and find your latitude and longitude. Enter that into your receivers USALS (Universal Satellites Automatic Location System) under your motor settings.
The plumb pole is real critical with these setups.
And to find your true south satellite go to the one closest to your highest most southern part of the ark (True South should be 0 on the motor) on where your Longitude is set to the closest sat you can lock to that.
In my case I am at 76.48 West so I moved the dish's Azimuth to 87 west. And then adjusted the Azimuth until I got signal on the receiver.
I did adjust the Declination angle on the dish to fine tune the signal by a hair and got better signal. Moved it half a baby finger and lost signal.
I tightened up the dish and set the receiver for USALS to the other satellites 91west 99west 97west ETC and they came in great the way I did it!
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
Need a VPN
Using the Express VPN Service Please Sing up here and Click on my referral link.
www.linkev.com/?a_fid=freesat...
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
If these Videos help you please consider suporting my work
www.paypal.com/donate/?token=...
/ robbiestrike
Learn about Satellite and other things by sitting back and binging on these playlists
/ ottawaoctane
Buy This Stuff - / shop
/ ottawaoctane
/ robbiestrikevideos
/ robbiestrike3
(c) Robbie Strike 2020 www.RobbieStrike.com
www.FreeSatelliteTV.net
Dish Pointer website: (0:00)
SatFinder Light Android app for you phone: (1:11)
SatHint and websites that list free channels!; (1:44)
Attaching the satellite dish to the motor: (2:29)
Calculate you Deinclination Angle: (2:38)
True South: (4:06)
Set up USALS on a satellite receiver:(5:07)
Dish moving across the geostationary ark: (6:36)
ExpressVPN: (9:12)
Outro: (9:40) - วิทยาศาสตร์และเทคโนโลยี
HH motor on Ebay $199.00 ebay.us/loNWj6
sorry to be off topic but does any of you know of a trick to log back into an Instagram account??
I was dumb forgot the account password. I appreciate any assistance you can offer me
@Elias Killian Instablaster ;)
@Malachi Diego I really appreciate your reply. I got to the site on google and im waiting for the hacking stuff atm.
Takes quite some time so I will get back to you later with my results.
@Malachi Diego It did the trick and I finally got access to my account again. Im so happy!
Thanks so much you really help me out!
@Elias Killian Happy to help :D
You are a big help Robbie. Thank you
Awesome
Hi, I have got a question. My dish is on dead straight and my motor is set to 0, so do I have to move the dish on the motor arm or on the L bracket to point the dish to 0.8 west??
this video makes me want to relocate my dish and try to get some other sats and actually set up the usals. My stuffs has been set up for over 11 years and still hanging in there on KU
Sucks they took a bunch of channels off. beem thinking about adding a cband. dishes arent cheap. and donors are hard to come by
Glad I have C band, I still use KU band for the few TV and Radio channels that I like on it.
Hi Robbie how you wire it up please ?
tenho este motor de apontamento.
Robbie Strike, from your experience what is easier to set a up an actuator or an USALS? I've only installed an USALS and It's not that complicated.
With the Actuator you will have to get the position just right for true south. Like all. and you will have to manually enter in each satellite. I also have done this with a HH motor!
So Usals can be a bit easier! (Done Right)
@@RobbieStrike Never had an actuator on my satellite dish I use HH motor and I use USALS in the satellite receiver menu, and I get the best signal strength and quality on most satellites including weak satellites or transponders. Most of the satellite dish sold in Romania don't need an actuator only a HH motor, because a 100 cm dish is more than enough for FTA KU-BAND.
At 4:13 where your screen shows Motor - Usals, mine says None so I don't think this is ever going to work! Even if the motor could be put in how can you move it? With all the important steps left out showing the setup this is never going to work!
That makes it to easy. LOL Personally There's not much on the other satellites Ku band for me to justify buying one, but it would be nice. But I have thought about multiple LNBs!
It is good for looking for KU band live feeds. who Knows with ATSC 3 the rood out. more Diginets!
boa tarde meu jovem.
adoro seus vidios mande pra mim este aplicativo dos satélites que aparecem no cinturão de Clarke.
Si, Satfinder Lite!
can a Strong satellite receiver work in US and Canada???
Any should work for unencrypted #freeSatelliteTv
How many satellites can you get overall?
In general an USALS motor has 80 West to 80 East turning point and this is the AMIKO brand. It depends by your location. For example in my country Romania with a 100 cm satellite dish and a USALS I can receive from 30W Hispasat to 68.5 Intelsat most of them are Ku Band satellites.
In my area, I get Channels on 87w, 89w, 91w, 95, 97w, 99w, 101w, 103w, 105w, 124w. There is more satellites that I can tune but they dont have much on them! You can look them up as I say by looking at www.sathint.com
@@RobbieStrike In Europe is the opposite. With a C-BAND dish you don't get much unless you are interested in channels from Russia, India or Pakistan. Most of the satellites broadcast on KU-BAND and you have plenty of Free To Air TV and Radio channels. North America should start broadcasting on KU-BAND and ditch the C-BAND it will be a major advantage especially for people living in rural areas and don't want pay TV
@@Nicholas_Chris I agree. Here in the UK, you would need a prime focus dish bigger than 1.8m to get anything watchable on C-Band, and you would also need planning permission. I have a 110cm dish with a motor and can get between 34.5w to 45e.
There is only one s its U sals also in the video you say your setting the dish angle to 38.5 you are not you are setting it to 20 degrees as stated in the dish pointer web site for a sg2100 motor. 44 for motor 23 for dish .
I ended up for the dish is just move the de incline part is Pointed until the signal was at its best on 87 and then I was able to get all the others!
@@RobbieStrike Ok that was quite a sentence . What i am saying is the declination angle has nothing to do with the angle of the dish / motor , it is the difference between true north and magnetic north at a given latitude . You get the dish angle based on the type of motor you have it is different for different motors . I get your trying to help people thank you but at least give them correct information . google declination / de incline
Dang that small meter is small enough to move my dish?
One that i had was not powerful enough off the battery but if I plugged it in to the outlet it would work!
Hi Robb, i from Malaysia. I wondering when im install the diseqc motor following by the true south still cannot follow the arc geometry.. can you help me? If you can email me by number phone, i just whats apps
You can try to contact me through Facebook or Discord
@@RobbieStrike ok2..
Please could you leave your email? Am in Ghana west Africa. I need your help. Thanks
This is a brain transplant , may good karma head your way